The adsorption capacities of ion exchangers with the primary amine (Lewatit® VP OC 1065) and polyamine (Diaion™ CR20) functional groups relative to Pd(II) and Cu(II) ions were tested in a batch system, taking into account the influence of t...
Isolating rhenium and molybdenum selectively from multicomponent acidic hydrometallurgical solutions remains problematic because of the abundance of competing cations and the low concentration of target oxoanions. This study investigates the sorption...
Adsorption abilities of weakly (Purolite A830), weakly basic/chelating (Purolite S984), and strongly basic (Lewatit MonoPlus SR7, Purolite A400TL, Dowex PSR2, Dowex PSR3) ion exchange resins of different functional groups and microporous Lewatit AF5...
Hexavalent chromium Cr (VI) compounds present in ilmenite concentrate not only pose significant environmental hazards due to their toxicity but also complicate further processing, interfering with technological operations in industrial production. Th...
The production of medical isotopes in Chalk River Laboratories facilities (Chalk River, ON, Canada) has resulted in a large quantity of cemented radioactive waste (CRW) containing valuable elements such as uranium. From the perspective of recovering...
Recovery of scandium from chloride-bearing process liquors formed during titanium–magnesium production remains constrained by trace-level metal content and chemically aggressive solution matrices. Within the present study, the retention behavio...
To improve enzyme stability, the immobilization process is often applied. The choice of a support on which the enzymes are adsorbed plays a major role in enhancing biocatalysts’ properties. In this study, bio-based (i.e., chitosan, coffee groun...
The recovery of La(III) and Ni(II) ions by a macroporous cation exchanger in sodium form (Lewatit Monoplus SP112) has been studied in batch experiments under varying HNO3 concentrations (0.2–2.0 mol/dm3), La(III) and Ni(II) concentrations (25&n...
A mixture of hexafluoroisopropanol (HFIP) and water was used as a new and unknown monophasic reaction solvent for fructose dehydration in order to produce HMF. HFIP is a low-boiling fluorous alcohol (b.p. 58 °C). Hence, HFIP can be recovered cost...
The development of new, cheaper, and more effective technologies to decrease the amount of wastewater containing heavy metals and to improve the quality is indispensable. Adsorption has become one of the alternative treatment methods. A small number...
This study aimed to develop a laboratory-scale direct air capture unit for evaluating and comparing amine-based adsorbents under temperature vacuum swing adsorption conditions. The experimental campaign conducted with the direct air capture unit allo...
Spent titanium chlorinator melt is a potential technogenic source of scandium, but its recovery is complicated by high contents of iron, aluminium and alkali and alkaline-earth chlorides. This study assessed a sequence of hydrochloric acid leaching,...
The adsorption capacities of ion exchangers with N-methyl-D-glucamine (NMDG) groups (Amberlite IRA 743, Lewatit MK 51, Purolite S110 and Purolite S108) relative to V(V) ions were tested in a batch system, taking into account the influence of various...
Brine purification is an important process unit in chlor-alkali industrial plants for the production of sodium hydroxide, chlorine, and hydrogen. The membrane cell process requires ultrapure brine, which is obtained through mechanical filtration, che...
The escalating demand for rare earth metals (REM) in situations of limited availability has spurred scientists to seek alternative sources of REM, such as industrial waste solutions. This paper investigates the potential for improving the sorption ac...
The growing demand for rare earth elements (REE) requires the search for economically viable materials to efficiently recover REE from various solutions. Our research aims to investigate the potential of using a combination of the ion exchangers Lewa...
This study explores the potential of robust, strongly basic type I ion exchange resins—specifically, Amberlyst® A26 OH and Lewatit® K 6465—as catalysts for the aldol condensation of citral and acetone, yielding pseudoionone. Empha...
Yarrowia lipolytica (YL) is a “non-conventional” yeast that is capable of producing important metabolites. One of the most important products that is secreted by this microorganism is lipase, a ubiquitous enzyme that has considerable industrial poten...
The results of a study of the kinetics of oxygen sorption from water by silver-containing nanocomposites synthesized on the base of macroporous ion exchangers with different pore sizes are presented. In the case of the Lewatit K 2620 ion exchanger, t...
Pure compounds extracted and purified from medical plants are crucial for preparation of the herbal products applied in many countries as drugs for the treatment of diseases all over the world. Such products should be free from toxic heavy metals; th...
Rare earth elements (REE) are present at low concentrations (hundreds of ppm) in phosphoric acid solutions produced by the leaching of phosphate ores by sulfuric acid. The strongly acidic and complexing nature of this medium, as well as the presence...
Ion exchange resins and immobilized lipase as heterogeneous catalysts are used to synthesize biodiesel for alternative fossil fuels. The use of ion exchange resins in the solid and activated phase can ease the separation process. Furthermore, resins...
Byproducts of winery industries are treated, in many cases, as useless wastes constituting not only a major disposal problem but also not providing any additional profit to the industries. However, these byproducts could be utilized as a source of va...
Tailings from inactive uranium mine sites represent a potential secondary source of rare earth elements (REEs). For this study, two mine tailings (DT and RAT) from restored uranium sites in Ontario, Canada, were used. Bioleaching experiments were con...
The adsorption ability of Lewatit S5528 (S5528) resin for C.I. Acid Green 16 (AG16), heavy metals (Zn(II), Cu(II) and Ni(II)) and phenol removal from single-component aqueous solutions is presented in this study to assess its suitability for wastewat...
This manuscript describes molybdenum recovery from copper Pregnant Leaching Solutions (PLSs) in the copper oxide mining industry with high contents of chloride ions. This product was recovered from the copper leaching pond solutions of the Chilean Na...
The selective removal of Cu(II) in the presence of sodium dodecylobenzene sulfonate from acidic effluents was made using the adsorption and micellar-enhanced ultrafiltration methods. Lewatit MonoPlus TP220 showed the best adsorption behavior in the s...
In this work, the chemical modification of cellulose nanocrystals (NCs) using an enzyme as a catalyst has been performed by a “grafting from” reaction, in order to covalently functionalize the external surface of NCs with both poly(L-lact...
The production of noble metals has started to shift towards using different types of wastes. The leaching solutions collected during the processing of waste have low concentrations of noble metals; therefore, it forces the use of sorption methods in...
Lipase from Candida rugosa (CRL) was stabilized at alkaline pH to overcome the inactivation problem and was immobilized for the first time by multipoint covalent attachment on different aldehyde-activated matrices. PEG was used as a stabilizing agent...
A packed-bed plug-flow reactor, denoted as the lab-scale liquid-solid (LS)² reactor, has been developed for the assessment of heterogeneous catalyst deactivation in liquid-phase reactions. The possibility to measure intrinsic kinetics was first...
Reutealis trisperma, due to its high kernel-oil yield (±50%) and long productivity (±70 years), is considered to be a promising feedstock for biodiesel production. In addition, this plant, which can thrive on marginal lands, is classifi...
Neodymium (Nd) and dysprosium (Dy) are two critical rare earth elements for fabricating NdFeB permanent magnets, which have crucial applications in modern technologies. The increasing global demand for Nd and Dy emphasizes new efficient processes for...
Depletion of reserves of rich copper–porphyry ore deposits necessitates the development of highly efficient methods for Mo (VI) extraction from complex, corrosive hydro-metallurgical media. The present study undertakes a comprehensive assessmen...
Nickel contamination in water is a critical issue due to its toxicity and persistence. This study presents a novel magnetic resin, developed by modifying Lewatit® MonoPlus TP 207 with magnetite nanoparticles, to enhance adsorption capacity and fa...
Textile effluent containing azo dyes such as C.I. Acid Violet 1 (AV1) can be degraded to toxic aromatic amines in the environment. Thus, there is a legitimate need to treat such effluents before they are discharged to surface waters. Two methods were...
Most Combi-lipases (CL) are based on mixtures of different lipases immobilized on different supports. The increased CL efficiency has been attributed solely to the complementary selectivity of lipases. However, the role of the immobilization support...
The Canadian Nuclear Laboratories (CNL) is developing a long-term management strategy for its existing inventory of solid radioactive cemented wastes, which contain uranium, mercury, fission products, and a number of minor elements. The composition o...
Samples of sweet and dessert wines, Vin Santo (VSR) from Malvasia grapes, and Granello (GR) from Sauvignon grapes were collected and analyzed for the content of selected macro- and micro-nutrients (Na, K, Mg, Ca, Mn, Fe, Cu and Zn) and of Pb. GR wine...
Ionic additives affect the structure, activity and stability of lipases, which allow for solving common application challenges, such as preventing the formation of protein aggregates or strengthening enzyme–support binding, preventing their des...
The medical isotope (Mo-99) production at Chalk River Laboratory involves the dissolution of irradiated isotope targets prior to the extraction of Mo-99. This process generates a waste that is cemented in 5-gallon containers and transferred to a wast...
Carbon-based catalysts can assist the oxidative leaching of sulfide minerals. Recently, we presented that AF 5 Lewatit® is among the catalysts with superior enargite oxidation capacity and capability to collect elemental sulfur on its surface. He...
Nitric–sulfuric acid leaching of substandard molybdenite concentrate from the Aktogay deposit (Kazakhstan) transfers only part of the molybdenum into solution: under the baseline process conditions, approximately 30% of the sulfide is oxidized,...