Skip to Content

1,579 Results Found

  • Article
  • Open Access
9 Citations
2,516 Views
8 Pages

11 May 2021

The crystallographic characteristic effect of Cu substrate on cathode dissolution behavior in line-type Cu/Sn–3.0Ag–0.5Cu (SAC305)/Cu solder joints during electromigration (EM) was investigated by scanning electron microscope (SEM), electron backscat...

  • Feature Paper
  • Article
  • Open Access
724 Views
9 Pages

Construction and Properties of Cu-/Zr-Based Thin Films on Glass Substrate

  • Yu Meng,
  • Chengcheng Zhang,
  • Xinyi Hu and
  • Zhongxiao Song

13 December 2025

A novel method for metallization of a glass substrate is proposed to improve adhesion strength between the glass and the metal layer. The Cu/glass substrate was fabricated using magnetron sputtering with the addition of nanoscale multilayer films (Zr...

  • Article
  • Open Access
6 Citations
2,749 Views
14 Pages

15 October 2023

This study focuses on the analyses of nano-twinned copper (Cu) films deposited through magnetron sputtering on silicon carbide (SiC) chips. The investigation encompasses the utilization of a chromium (Cr) adhesive layer coupled with varying voltage b...

(This article belongs to the Topic Advanced Processes in Metallurgical Technologies)
  • Article
  • Open Access
5 Citations
4,625 Views
11 Pages

Al2O3-Cu Substrate with Co-Continuous Phases Made by Powder Sintering Process

  • Shuangxi Wang,
  • Haifeng Lan,
  • Wenjun Wang,
  • Gaoshan Liu and
  • Dan Zhang

20 August 2018

Ceramic-Al substrates with co-continuous ceramic and metal phases, which exhibit high thermal conductivity and compatible coefficient of thermal expansion (CTE), have been widely investigated through the process of die-casting. In this research, a ki...

  • Article
  • Open Access
3 Citations
3,038 Views
9 Pages

28 May 2024

(Cu,C)Ba2Ca3Cu4Oy is a nontoxic cuprate superconducting material with a superconducting transition temperature of about 116 K. Recently, it was found that bulk samples of this material synthesized under high pressure hold the highest irreversibility...

(This article belongs to the Special Issue Advances in Synthesis, Characterization, and Application of Thin Films)
  • Proceeding Paper
  • Open Access
1,324 Views
7 Pages

Silver Nanostars Spread on Cu(OH)2 Nanowires for SERS Substrates

  • José Luis Zamora Navarro,
  • Diana Jiménez Girón,
  • Hector Ariel Renteral Rodríguez,
  • Yuri Okolodkov and ,
  • Marcos Luna Cervantes,
  • Guillermo Santana Rodríguez,
  • Julián Hernández Torres and
  • Luis Zamora Peredo
  • + 3 authors+ 0 author

In this work, the plasmonic performance of SERS substrates fabricated by two methods was evaluated: the first method involves simultaneously reducing and depositing silver nanostars (AgNSs) onto copper hydroxide nanowires (Cu(OH)2-NWs), and the secon...

(This article belongs to the Proceedings of The International Symposium on Nanotechnology for Medicine, Environment and Energy)
  • Article
  • Open Access
4 Citations
1,774 Views
9 Pages

Substrate Structured Bournonite CuPbSbS3 Thin Film Solar Cells

  • Limei Lin,
  • Rui Da,
  • Chenqi Zheng,
  • Ruibo Zeng and
  • Junda Ding

15 August 2023

CuPbSbS3 has excellent photoelectric properties, such as high element abundance and optical absorption coefficient, and a suitable band gap, which is a material with the potential for absorbing layers of high-quality thin film solar cells. In additio...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
1 Citations
2,124 Views
15 Pages

Substrate-Dependent Characteristics of CuSbS2 Solar Absorber Layers Grown by Spray Pyrolysis

  • Samaneh Shapouri,
  • Elnaz Irani,
  • Payam Rajabi Kalvani,
  • Stefano Pasini and ,
  • Gianluca Foti,
  • Antonella Parisini and
  • Alessio Bosio
  • + 2 authors+ 0 author

Copper antimony sulfide (CuSbS2) is an affordable and eco-friendly solar absorber with an optimal bandgap and high absorption coefficient, and it stands out as a promising candidate for thin-film solar cells. This study investigates the effects of in...

(This article belongs to the Special Issue Advanced Functional Nanostructured Films and Coatings for Energy Applications, 2nd Edition)
  • Article
  • Open Access
27 Citations
5,948 Views
12 Pages

Effect of Substrate Temperature on Variations in the Structural and Optical Properties of Cu2O Thin Films Deposited via RF Magnetron Sputtering

  • Jun-A Kim,
  • Jung-Hwan Park,
  • Sang-Geon Park,
  • Chang-Sik Son and ,
  • Young-Guk Son and
  • Dong-Hyun Hwang
  • + 1 author+ 0 author

9 April 2023

In the present study, Cu2O films were deposited on a glass substrate via RF (radio frequency) magnetron sputtering under substrate temperature conditions that ranged from room temperature (RT, 25 °C) to 400 °C. The structural, compositional,...

(This article belongs to the Special Issue Feature Paper in "Materials for Energy Applications" 2022–2023)
  • Article
  • Open Access
51 Citations
6,522 Views
18 Pages

High-Performance Flexible Ultraviolet Photodetectors with Ni/Cu-Codoped ZnO Nanorods Grown on PET Substrates

  • Hafiz Muhammad Salman Ajmal,
  • Fasihullah Khan,
  • Noor Ul Huda,
  • Sunjung Lee and ,
  • Kiyun Nam,
  • Hae Young Kim,
  • Tae-Hyong Eom and
  • Sam Dong Kim
  • + 3 authors+ 0 author

25 July 2019

As a developing technology for flexible electronic device fabrication, ultra-violet (UV) photodetectors (PDs) based on a ZnO nanostructure are an effective approach for large-area integration of sensors on nonconventional substrates, such as plastic...

  • Article
  • Open Access
1 Citations
2,201 Views
10 Pages

8 April 2022

Copper indium oxide (CuInOx) thin films were deposited by the RF magnetron sputtering technique using a Cu2O:In2O3 target at varying substrate temperatures up to 400 °C. Mutually exclusive requirements of having a p-type thin film along with incr...

(This article belongs to the Special Issue Recent Advances in the Growth and Characterizations of Thin Films)
  • Article
  • Open Access
9 Citations
3,244 Views
12 Pages

Study on the Performance of Ag-Cu Bimetal SERS Substrate

  • Xiaolong Song,
  • Xiaoya Yan,
  • Na Li,
  • Lin Shen and
  • Mingli Wang

2 October 2022

SERS has become a powerful trace detection technology, but its practical application is often limited by the fixed optical properties of cast metals (Au, Ag and Cu). In this paper, the bimetallic nanostructures prepared by changing the metal content...

(This article belongs to the Special Issue Advanced Surface Modification, Properties, Performance and Analysis Technology)
  • Article
  • Open Access
4 Citations
2,520 Views
12 Pages

Effect of Cu-Sn Addition on Corrosion Property of Pressureless Sintered Fe-Cu-Co Substrate Alloys

  • Hongliang Tao,
  • Yunzhu Ma,
  • Yuhui Chen,
  • Shuai Du and ,
  • Haojun Zhou,
  • Yuhang Yin,
  • Yimin Li and
  • Fenghua Luo
  • + 3 authors+ 0 author

11 January 2023

Fe-Cu-Co prealloyed powder is used for bonding metal of diamond tools. In order to obtain diamond tools with good mechanical properties by pressureless sintering, it is necessary to add Cu-Sn sintering aids. The substrate also has high corrosion resi...

  • Article
  • Open Access
6 Citations
3,226 Views
16 Pages

High-Density-Nanotips-Composed 3D Hierarchical Au/CuS Hybrids for Sensitive, Signal-Reproducible, and Substrate-Recyclable SERS Detection

  • Hao Fu,
  • Weiwei Liu,
  • Junqing Li,
  • Wenguang Wu and ,
  • Qian Zhao,
  • Haoming Bao,
  • Le Zhou,
  • Shuyi Zhu,
  • Jinglin Kong and
  • Weiping Cai
  • + 6 authors+ 1 author

10 July 2022

Surface-enhanced Raman scattering (SERS) provides an unprecedented opportunity for fingerprinting identification and trace-level detection in chemistry, biomedicine, materials, and so on. Although great efforts have been devoted to fabricating sensit...

(This article belongs to the Special Issue Functional Nanomaterials for Sensing and Detection)
  • Article
  • Open Access
6 Citations
3,771 Views
13 Pages

27 October 2018

Aluminum and aluminum alloys have the advantage of a high strength-to-weight ratio, but their low hardness and poor wear resistance often cause wear damage. In the present study, the cladding layer was prepared using argon-shielded arc cladding of Cu...

  • Article
  • Open Access
3 Citations
2,411 Views
11 Pages

Investigation of the Features of a Superconducting Spin Valve Fe1/Cu/Fe2/Cu/Pb on a Piezoelectric PMN–PT Substrate

  • Andrey Kamashev,
  • Nadir Garif’yanov,
  • Aidar Validov,
  • Zvonko Jagličić and ,
  • Viktor Kabanov,
  • Rinat Mamin and
  • Ilgiz Garifullin
  • + 2 authors+ 0 author

13 July 2023

The properties of a superconducting spin valve Fe1/Cu/Fe2/Cu/Pb on a piezoelectric PMN–PT substrate ([Pb(Mg1/3Nb2/3)O3]0.7–[PbTiO3]0.3) in electric and magnetic fields have been studied. The magnitude of the shift of the superconducting t...

  • Article
  • Open Access
3 Citations
2,292 Views
15 Pages

17 June 2023

Epoxy coatings provide an economical and practical solution for combating steel corrosion. However, epoxy coatings have poor conductivity, resulting in the accumulation of electrostatic charges. The surface conductivity and anticorrosion properties o...

  • Article
  • Open Access
447 Views
15 Pages

Characterization of Interfacial Reaction Layers Between a Zn-5Al-3Mg Solder Alloy and Cu Substrate

  • Jee-Hwan Bae,
  • Yena Kwon,
  • Seung-Moon Baek,
  • Choong-Do Lee and
  • Cheol-Woong Yang

12 August 2026

The interfacial reaction between solder and substrate is a critical factor governing joint reliability, making it essential to understand the formation and stability of interfacial reaction layers when developing new high-temperature lead-free solder...

(This article belongs to the Special Issue Advances in Welding Processes of Metallic Materials—2nd Edition)
  • Article
  • Open Access
12 Citations
6,408 Views
12 Pages

Nucleation and Morphology of Cu6Sn5 Intermetallic at the Interface between Molten Sn-0.7Cu-0.2Cr Solder and Cu Substrate

  • Junhyuk Son,
  • Dong-Yurl Yu,
  • Min-Su Kim,
  • Yong-Ho Ko and ,
  • Dong-Jin Byun and
  • Junghwan Bang
  • + 1 author+ 0 author

25 January 2021

The nucleation kinetics and morphology of Cu6Sn5 IMCs at the interface between a Sn-0.7Cu-0.2Cr solder and Cu substrate were investigated in this study. A Sn-0.7Cu solder was utilized as a reference to elucidate the impact of Cr addition. The mechani...

  • Article
  • Open Access
15 Citations
4,446 Views
11 Pages

Effect of Cu Substrate Roughness and Sn Layer Thickness on Whisker Development from Sn Thin-Films

  • Balázs Illés,
  • Tamás Hurtony,
  • Olivér Krammer,
  • Bálint Medgyes and ,
  • Karel Dušek and
  • David Bušek
  • + 1 author+ 0 author

3 November 2019

The effect of copper substrate roughness and tin layer thickness were investigated on whisker development in the case of Sn thin-films. Sn was vacuum-evaporated onto both unpolished and mechanically polished Cu substrates with 1 µm and 2 μm...

(This article belongs to the Special Issue Environmentally-Induced Failures of Electronic Grade Alloys and Coatings)
  • Article
  • Open Access
9 Citations
3,230 Views
13 Pages

Long-Term Aging Study on the Solid State Interfacial Reactions of In on Cu Substrate

  • Han-Tang Hung,
  • Fu-Ling Chang,
  • Chin-Hao Tsai,
  • Chia-Yi Liao and
  • C. R. Kao

18 September 2023

Indium is considered a candidate low-temperature solder because of its low melting temperature and excellent mechanical properties. However, the solid-state microstructure evolution of In with different substrates has rarely been studied due to the s...

(This article belongs to the Special Issue Microstructure Engineering of Metals and Alloys, Volume II)
  • Article
  • Open Access
10 Citations
3,766 Views
11 Pages

Copper Oxides on a Cu Sheet Substrate Made by Laser Technique

  • Małgorzata Musztyfaga-Staszuk,
  • Damian Janicki,
  • Katarzyna Gawlińska-Nęcek,
  • Robert Socha and ,
  • Grzegorz Putynkowski and
  • Piotr Panek
  • + 1 author+ 0 author

27 August 2020

This paper presents results from the production of copper oxide layers on a Cu sheet substrate using diode and Yb:YAG disc lasers operating in the wavelength ranges of 808–940 nm and 1030 nm. The parameters of these layers were compared with th...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys)
  • Article
  • Open Access
8 Citations
2,622 Views
13 Pages

Bonding Behavior and Quality of Pressureless Ag Sintering on (111)-Oriented Nanotwinned Cu Substrate in Ambient Air

  • Xingming Huang,
  • Wei He,
  • Jialong Liang,
  • Hao-Kun Yang and ,
  • Chunliang Zhou and
  • Zhi-Quan Liu
  • + 1 author+ 0 author

9 September 2024

(111)-oriented nanotwinned Cu ((111)nt-Cu) has shown its high surface diffusion rate and better oxidation resistance over common polycrystalline Cu (C-Cu). The application of (111)nt-Cu as an interface metallization layer in Ag-sintered technology un...

  • Feature Paper
  • Article
  • Open Access
1,472 Views
13 Pages

13 January 2026

Herein, we propose a simple and cost-effective method for fabricating moderate-sensitivity surface-enhanced Raman scattering (SERS) substrates using Cu-plasma polymer fluorocarbon (Cu-PPFC) nanocomposite films fabricated through RF sputtering. The us...

(This article belongs to the Special Issue Advanced Optical Film Coating)
  • Article
  • Open Access
3 Citations
2,619 Views
10 Pages

Investigation of a Hydrophobic Sputtered Cu Electrode to Electrocatalyze CO2 Towards a C2+ Product: The Effect of Substrate and Catalyst Thickness

  • Dongdong Wang,
  • Xiaoyu Mao,
  • Yaqi Peng,
  • Wei Zhang and ,
  • Qiulin Ye,
  • Yan Yang,
  • Fengping Yu,
  • Yan Ma,
  • Angjian Wu and
  • Zhifu Qi
  • + 5 authors+ 0 author

29 October 2024

The overuse of fossil fuels has resulted in massive CO2 emissions, causing global environmental problems. Renewable energy-driven electrocatalysis, which can convert CO2 into fuels and chemicals, is considered an emerging technology for carbon resour...

(This article belongs to the Topic Carbon Capture, Storage and Utilisation Technologies (CCS/CCU)—2nd Volume)
  • Article
  • Open Access
6 Citations
5,904 Views
23 Pages

A new and transformative era in semiconductor packaging is underway, wherein, there is a shift from transistor scaling to system scaling and integration through advanced packaging. For advanced packaging, interconnect scaling is a key driver, with in...

  • Article
  • Open Access
3 Citations
1,492 Views
15 Pages

Microstructural Characteristics of WC-Cu Cladding on Mild Steel Substrate Prepared Through Plasma Transferred Arc Welding

  • Muhammad Hussain,
  • Bosheng Dong,
  • Zhijun Qiu,
  • Ulf Garbe and ,
  • Zengxi Pan and
  • Huijun Li
  • + 1 author+ 0 author

13 August 2025

This study explores the development of a novel composite coating system combining the high hardness of WC and thermal conductivity of Cu, employing the plasma transfer arc welding method under ambient conditions. Utilizing an advanced welding approac...

(This article belongs to the Special Issue Additive Manufacturing of Metallic Materials: Experiments and Modelling)
  • Article
  • Open Access
5 Citations
4,121 Views
11 Pages

Interfacial Reaction and Microstructure Evolution of Sn-9Zn/Ni(Cu) Solder Joints

  • Xuewei Zhu,
  • Jian Peng,
  • Xiaofeng Wei,
  • Pengpeng Yan and
  • Fu Wang

24 May 2019

Sn-9Zn solder is a promising Pb-free solder, but it tends to form bulky intermetallic compounds (IMC) grains at the interface when soldered with common simple metal Cu or Ni substrates. Interfacial reaction between Sn-9Zn solder and Ni(Cu) solid solu...

  • Article
  • Open Access
8 Citations
2,815 Views
17 Pages

17 September 2024

The demand for more efficient and sustainable electrical systems has driven research in the quest for innovative materials that enhance the properties of electrical conductors. This study investigated the influence of copper (Cu) coating and multi-wa...

  • Article
  • Open Access
8 Citations
3,596 Views
12 Pages

3 June 2021

Hardness of dissimilar laser clad samples of NiCrBSi alloy on a Cu substrate was investigated, with the aim of optimizing the manufacturing process for high-durability continuous casting molds for steelmaking. The performance of the clads is compared...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
14 Citations
3,299 Views
11 Pages

5 February 2020

Indium sulfide (InxSy)—besides CdS and Zn(O,S)—is already used as a buffer layer in chalcopyrite-type thin-film solar cells and modules. We discuss the influence of the substrate temperature during very fast magnetron sputtering of InxSy buffer layer...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
610 Views
14 Pages

The presence of corrosion on metal substrates can compromise the integrity of a structure. In this study, discrete fiber Bragg grating (FBG) sensing technology is used to monitor the corrosion process of a Cu surface in a corrosive environment. The s...

(This article belongs to the Section Optoelectronics)
  • Article
  • Open Access

16 November 2026

For large-area substrate-to-base-plate joints in power modules, low-temperature Cu particle sinter bonding can offer a low-cost and high-thermal-conductivity alternative to soldering. Studies on large-area, low-temperature Cu sinter bonding remain sc...

(This article belongs to the Special Issue Novel Insights into Welding and Joining Technologies of Metallic Materials)
  • Article
  • Open Access
1 Citations
1,410 Views
12 Pages

Optical Properties and Thermal Stability of Ag-In-Cu Film on Aluminum Alloy Substrate Deposited by Magnetron Sputtering

  • Xiaojun Zhao,
  • Xinyue Wang,
  • Ke Liu,
  • Yuxiang Jiang and ,
  • Zhenwu Peng,
  • Yuchi Zhou,
  • Zhonglin Qian,
  • Wei Li,
  • Lekang Lu and
  • Zhenyang Cai
  • + 6 authors+ 1 author

17 March 2025

High-reflectivity metallic films on aluminum substrates are crucial in advanced aerospace and military applications due to their excellent reflectivity and workability. In order to further improve the reflectivity and thermal stability of films, this...

(This article belongs to the Special Issue Review and Feature Papers in "Metals and Alloys" Section (2nd Edition))
  • Article
  • Open Access
3 Citations
1,002 Views
19 Pages

23 October 2025

In the application of ceramic dielectric filters, to achieve electromagnetic shielding of signals and subsequent integrated applications, it is necessary to carry out metallization treatment on their surfaces. The quality of metallization directly af...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
3 Citations
3,532 Views
21 Pages

Direct Energy Deposition of Inconel 718 onto Cu Substrate for Bimetallic Structures with Excellent Comprehensive Properties

  • Stefano Felicioni,
  • Josip Vincic,
  • Annalisa Zacco,
  • Alberta Aversa and ,
  • Paolo Fino and
  • Federica Bondioli
  • + 1 author+ 0 author

25 November 2025

In the aerospace sector, integrating advanced materials with high mechanical capabilities represents the forefront of material science, especially in the field of rocketry. Bimetallic structures are increasingly used in aerospace applications due to...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
3,465 Views
11 Pages

Galvanic-Replacement-Assisted Synthesis of Nanostructured Silver-Surface for SERS Characterization of Two-Dimensional Polymers

  • Wenkai Zhao,
  • Runxiang Tan,
  • Yanping Yang,
  • Haoyong Yang and ,
  • Jianing Wang,
  • Xiaodong Yin,
  • Daheng Wu and
  • Tao Zhang
  • + 3 authors+ 0 author

12 January 2024

Surface-enhanced Raman scattering (SERS) spectroscopy is a powerful technology in trace analysis. However, the wide applications of SERS in practice are limited by the expensive substrate materials and the complicated preparation processes. Here we r...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
4 Citations
3,371 Views
12 Pages

A Study on Regulating the Residual Stress of Electroplated Cu by Manipulating the Nanotwin Directions

  • Gangli Yang,
  • Tailong Shi,
  • Liu Chang,
  • Hongjia Zhu and ,
  • Dongyu Tong,
  • Wending Yang,
  • Zeyuan Li and
  • Liyi Li
  • + 3 authors+ 0 author

14 November 2024

Glass substrate, a new type of substrate with excellent mechanical and electrical properties of glass itself, has great potential to become an ideal platform for heterogeneous integration in chiplet systems for high-performance computing applications...

(This article belongs to the Special Issue Two-Dimensional Materials for Electronic and Optoelectronic Devices)
  • Article
  • Open Access
12 Citations
5,700 Views
9 Pages

21 March 2019

This study investigated the suppression of the growth of the intermetallic compound (IMC) layer that forms between epoxy solder joints and the substrate in electronic packaging by adding graphene nano-sheets (GNSs) to 96.5Sn–3.0Ag–0.5Cu (...

(This article belongs to the Collection Additive Manufacturing: Alloy Design and Process Innovations)
  • Feature Paper
  • Article
  • Open Access
19 Citations
4,355 Views
14 Pages

10 April 2020

A fluoropolyurethane-encapsulated process was designed to rapidly fabricate low-flow resistance surfaces on the zinc substrate. For the further enhancement of the drag-reduction effect, Cu2+-assisted chemical etching was introduced during the fabrica...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
20 Citations
3,677 Views
10 Pages

Growth and Characterization of Cu2MnSnS4 Thin Films Synthesized by Spray Pyrolysis under Air Atmosphere

  • Sarra Dridi,
  • Eric Aubry,
  • Nabila Bitri,
  • Fatma Chaabouni and
  • Pascal Briois

9 October 2020

The direct synthesis of chalcopyrite Cu2MnSnS4 (CMTS) thin films by a spray pyrolysis technique on glass substrates under oxidative conditions (ambient atmosphere and using compressed air as a carrier gas instead of nitrogen) was studied. The effect...

(This article belongs to the Section Thin Films)
  • Article
  • Open Access
6 Citations
2,745 Views
12 Pages

18 November 2022

The copper sulphide mining process would produce a large number of copper tailings that can be treated with different substrates so as to act as guest soil in the ecological reclamation of the mine. In order to reveal the influence of different coppe...

(This article belongs to the Section Environmental Sustainability and Applications)
  • Article
  • Open Access
227 Views
13 Pages

A Comparative Study of Parylene, PSPI and ALD TiO2/TiN/Ru/Cu Multilayer as Adhesion Layers on Glass Surface for Glass-Cu Adhesion Enhancement

  • Tailong Shi,
  • Qi Li,
  • Hongfei Chen,
  • Shunyu Yao and ,
  • Liyi Li,
  • Hua Hong,
  • Li Zheng,
  • Shiwei Xia,
  • Zhongping Bao and
  • Andrew C. Chang
  • + 5 authors+ 0 author

23 October 2026

Glass substrates exhibit great potential in 2.5D/3D advanced packaging, but poor interfacial adhesion with metal layers remains a critical challenge. This work studies three different adhesion layer strategies, namely Parylene-C, photosensitive polyi...

(This article belongs to the Section D: Materials and Processing)
  • Review
  • Open Access
4 Citations
4,742 Views
21 Pages

Process Integration and Reliability Challenges of Through-Glass Vias for Glass-Based Advanced Packaging: A Focused Review

  • Dong Bae Park,
  • Jinho Jo,
  • Seonwoo Kim,
  • Da-Yeong Lee and ,
  • Suin Chae,
  • Soobin Park,
  • Se-Hoon Park,
  • Tae-Young Lee,
  • Kyoung-Min Kim and
  • Hyunjin Nam
  • + 8 authors+ 3 authors

14 June 2026

Recent advances in chiplet architectures, heterogeneous integration, 2.5D/3D packaging, high-performance computing, and RF applications have increased the demand for high-density vertical interconnects and low-loss packaging platforms. Glass substrat...

(This article belongs to the Collection Microdevices and Applications Based on Advanced Glassy Materials)
  • Article
  • Open Access
11 Citations
3,571 Views
13 Pages

23 January 2024

It is difficult to confirm the existence of intermetallic compounds (IMCs) between SnIn and Cu, as their atomic numbers are very close, making it challenging to differentiate them through experimental tests. In order to determine IMCs and understand...

  • Article
  • Open Access
13 Citations
4,592 Views
15 Pages

Sensitivity Enhancement of Tube-Integrated MEMS Flow Sensor Using Flexible Copper on Polyimide Substrate

  • Tsuyoshi Tsukada,
  • Ryusei Takigawa,
  • Yoshihiro Hasegawa,
  • Muhammad Salman Al Farisi and
  • Mitsuhiro Shikida

24 December 2022

A tube-integrated flow sensor is proposed in this study by integrating a micro-electro mechanical systems (MEMS) flow-sensing element and electrical wiring structure on the same copper on polyimide (COP) substrate. The substrate was rolled into a cir...

(This article belongs to the Special Issue MEMS/NEMS for Sensing: Array, Integration, Intelligence and Application)
  • Article
  • Open Access
38 Citations
4,410 Views
17 Pages

Efficient Removal of Cu(II), Zn(II), and Cd(II) from Aqueous Solutions by a Mineral-Rich Biochar Derived from a Spent Mushroom (Agaricus bisporus) Substrate

  • Guosheng Zhang,
  • Na Liu,
  • Yuan Luo,
  • Haibo Zhang and ,
  • Long Su,
  • Kokyo Oh and
  • Hongyan Cheng
  • + 2 authors+ 0 author

23 December 2020

This study evaluated the novel application of a mineral-rich biochar derived from a spent Agaricus bisporus substrate (SAS). Biochars with various pyrolysis temperatures (350–750 °C) were used to remove Cu(II), Zn(II), and Cd(II) from aqueo...

(This article belongs to the Special Issue Adsorbents and Their Applications)
  • Feature Paper
  • Article
  • Open Access
31 Citations
6,768 Views
12 Pages

Improvement in the Figure of Merit of ITO-Metal-ITO Sandwiched Films on Poly Substrate by High-Power Impulse Magnetron Sputtering

  • Hui Li,
  • Ying-Jie Gao,
  • Shuo-Huang Yuan,
  • Dong-Sing Wuu and ,
  • Wan-Yu Wu and
  • Sam Zhang
  • + 1 author+ 0 author

28 January 2021

High-power impulse magnetron sputtering (HiPIMS) was used to deposit ITO/Ag/ITO (IAgI) and ITO/Cu/ITO (ICuI) sandwiched films on polyethylene naphthalate substrate at room temperature as flexible transparent conductive materials. The hybrid layers we...

  • Article
  • Open Access
1 Citations
1,109 Views
20 Pages

Study of Application of an Active Ultrasound by Use of Zn-Al-Mg-Ti-Based Solder on Selected Substrates

  • Roman Koleňák,
  • Tomáš Meluš,
  • Jaromír Drapala,
  • Peter Gogola and
  • Matej Pašák

28 February 2025

This study investigates the potential application of Zn5Al1.5Mg1.5Ti active solder in ultrasonic soldering of Al2O3 ceramics and Cu substrates. The research explores the microstructural characteristics, phase composition, and mechanical properties of...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys (3rd Edition))
  • Article
  • Open Access
1 Citations
3,775 Views
16 Pages

Research on the Construction of Cu2O Photonic Crystals on Different Textile Substrates and Their Mechanical Properties

  • Chunxing Zhou,
  • Zhen Yin,
  • Yiqin Shao,
  • Guocheng Zhu and ,
  • Parpiev Khabibulla,
  • Adkhamjon Gafurov and
  • Juramirza Abdiramatovich Kayumov
  • + 2 authors+ 0 author

13 February 2025

Structural color-generating materials are expected to replace pigments and dyes as a new type of color-developing materials with good light stability and bright colors. Due to the relatively high refractive index of Cu2O microspheres, they have stron...

of 32