Skip to Content

227 Results Found

  • Article
  • Open Access
1 Citations
2,296 Views
14 Pages

4 December 2022

Lightweight alloys have great importance for car manufacturers that aim to produce safer, lighter, and more environmentally friendly vehicles. As a result, it is essential to develop new lightweight alloys, with superior properties to conventional on...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
2,957 Views
17 Pages

10 May 2024

This study investigates the phase equilibria of the Al-Mo-Hf ternary system at 400 °C and 600 °C using X-ray diffraction (XRD) and electron probe microanalysis (EPMA/WDS) techniques. Seven three-phase and five two-phase regions were identifie...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
4 Citations
3,032 Views
11 Pages

Phase Transitions in the Co–Al–Nb–Mo System

  • Denis Davydov,
  • Nataliya Kazantseva,
  • Nikolai Popov,
  • Nina Vinogradova and
  • Igor Ezhov

23 November 2021

Phase transitions in the Co-rich part of the Co–Al–Nb–Mo phase diagram are studied by energy dispersive spectroscopy (EDS), X-ray analysis, transmission electron microscopy (TEM), and differential scanning calorimetry (DSC) measurem...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Feature Paper
  • Article
  • Open Access
15 Citations
3,980 Views
10 Pages

23 January 2022

The achievement of room-temperature (RT) superelasticity in a Ti-Mo-Al ternary alloy system through the addition of a relatively high concentration of Al to manipulate the phase stability of the ω phase is realized in this study. The compositio...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
4 Citations
2,599 Views
17 Pages

Catalytic Upgrading of Microalgae-Based Bio-Oils for Sustainable Jet Fuel Production

  • Bruna Thomazinho França,
  • Filipe Paradela,
  • Marta Martins,
  • Ana Luísa Fernando and ,
  • Alberto Reis and
  • Paula Costa
  • + 1 author+ 0 author

The transition to sustainable energy systems has intensified the search for renewable alternatives to reduce greenhouse gas emissions and reliance on fossil fuels. In this context, microalgae have emerged as a promising third-generation feedstock for...

  • Article
  • Open Access
8 Citations
2,943 Views
11 Pages

Preparation of Aluminum–Molybdenum Alloy Thin Film Oxide and Study of Molecular CO + NO Conversion on Its Surface

  • Tamerlan T. Magkoev,
  • Dzhamilya G. Mustafaeva,
  • Vladislav B. Zaalishvili,
  • Oleg G. Ashkhotov and
  • Zaurbek T. Sozaev

18 March 2022

Adsorption and interaction of carbon monoxide (CO) and nitric oxide (NO) molecules on the surface of bare Al-Mo(110) system and on that obtained by its in situ oxidation have been studied in ultra-high vacuum (base pressure: ca. 10−8 Pa) by mea...

(This article belongs to the Section Catalytic Materials)
  • Article
  • Open Access
4 Citations
2,863 Views
18 Pages

Investigation of the Nature of the Interaction of Me-MeN-(Me,Mo,Al)N Coatings (Where Me = Zr, Ti, or Cr) with a Contact Medium Based on the Ni-Cr System

  • Sergey Grigoriev,
  • Oleg Yanushevich,
  • Natella Krikheli,
  • Alexey Vereschaka and ,
  • Filipp Milovich,
  • Nikolay Andreev,
  • Anton Seleznev,
  • Alexander Shein,
  • Olga Kramar and
  • Pavel Peretyagin
  • + 6 authors+ 1 author

10 June 2022

This paper discusses the results of a study focused on the nature of the interaction of Me-MeN-(Me,Mo,Al)N coatings (where Me = zirconium (Zr), titanium (Ti), or chromium (Cr)) with a contact medium based on the Ni-Cr system. The studies were carried...

(This article belongs to the Special Issue Technologies of Coatings and Surface Hardening for Tool Industry II)
  • Article
  • Open Access
6 Citations
2,437 Views
16 Pages

Preparation and Study of Composite Materials of the NiAl-Cr-Mo-Nanoparticles (ZrO2, MgAl2O4) System

  • Leonid Agureev,
  • Valeriy Kostikov,
  • Svetlana Savushkina,
  • Zhanna Eremeeva and
  • Maxim Lyakhovetsky

24 August 2022

Materials based on the NiAl-Cr-Mo system with zirconium oxide or aluminum-magnesium spinel nanoparticle small additions were obtained by spark plasma sintering. Thermodynamic modeling was carried out to predict the phase formation in the NiAl-Cr-Mo s...

(This article belongs to the Special Issue Powder Metallurgy: Materials and Processing)
  • Article
  • Open Access
1 Citations
692 Views
18 Pages

30 March 2026

Polysilicon is widely used in the photovoltaic and semiconductor industries. The presence of trace phosphorus impurities in the trichlorosilane feedstock can severely degrade the quality of polysilicon products. To address the urgent need for complet...

  • Article
  • Open Access
3 Citations
2,393 Views
26 Pages

Development of Materials Based on the NiAlCrMoCo System Reinforced with ZrO2 Nanoparticles

  • Leonid Agureev,
  • Svetlana Savushkina,
  • Ivan Laptev,
  • Elena Vysotina and
  • Maxim Lyakhovetsky

24 November 2022

This paper describes thermodynamic modeling of the NiAl–CrMoCo system with the calculation of the equilibrium composition and thermodynamic parameters of the system. NiAl-Cr-Mo-Co alloy samples of equiatomic composition, including those with a...

(This article belongs to the Special Issue High Energy Ball Milling and Consolidation of Nanocomposite Powders)
  • Article
  • Open Access
8 Citations
3,459 Views
21 Pages

Enhancement of the Mechanical and Tribological Properties of Aluminum-Based Alloys Fabricated by SPS and Alloyed with Mo and Cr

  • Sergey N. Grigoriev,
  • Alexander Mironov,
  • Ekaterina Kuznetsova,
  • Yuri Pristinskiy and ,
  • Pavel Podrabinnik,
  • Nestor Washington Solís Pinargote,
  • Iosif Gershman,
  • Pavel Peretyagin and
  • Anton Smirnov
  • + 4 authors+ 0 author

25 November 2021

Multicomponent aluminum-based alloys doped with chromium (Cr) and molybdenum (Mo), fabricated by spark plasma sintering (SPS), derived from a powder mixture prepared by mechanical alloying, were studied in this work. The morphology of the pristine an...

(This article belongs to the Special Issue Machining of Advanced Cutting Materials: Fundamentals, Modeling and Applications)
  • Article
  • Open Access
4 Citations
2,366 Views
18 Pages

A Comparison of 90° Bending for Foldable Electronics

  • Megan J. Cordill,
  • Patrice Kreiml,
  • Harald Köstenbauer and
  • Christian Mitterer

11 January 2024

In order to assess the longevity of foldable electronics, folding or bending tests on model systems need to be performed. However, not all bending tests are created equal in that different configurations lead to different amounts of mechanical damage...

(This article belongs to the Section Thin Films)
  • Article
  • Open Access
8 Citations
2,943 Views
11 Pages

Preparation of Molybdenum Coatings by Molten Salt Electrodeposition in Na3AlF6-NaF-Al2O3-MoO3 System

  • Qian Kou,
  • Weiliang Jin,
  • Chuntao Ge,
  • Jie Pang and ,
  • Jun Zhang,
  • Geir Martin Haarberg,
  • Saijun Xiao and
  • Ping Wang
  • + 3 authors+ 0 author

19 July 2023

In this paper, electrodeposition of a molybdenum coating was conducted in Na3AlF6-NaF-Al2O3-MoO3 molten salts at 930 °C to investigate the availability of preparation of thick molybdenum coatings. The effects of current density and electrodeposit...

(This article belongs to the Special Issue Advanced Surface Technology and Application)
  • Article
  • Open Access
9 Citations
5,913 Views
8 Pages

30 September 2016

Formation of MoSi2–Al2O3 composites with a broad range of the MoSi2/Al2O3 ratio was conducted by thermite-based combustion synthesis in the SHS mode. The addition of two thermite mixtures composed of MoO3 + 2Al and 0.6MoO3 + 0.6SiO2 + 2Al into the Mo...

  • Article
  • Open Access
5 Citations
2,268 Views
11 Pages

Effects of 3d Transition Metal Substitutions on the Phase Stability and Mechanical Properties of Ti–5.5Al–11.8[Mo]eq Alloys

  • Naoki Nohira,
  • Keiko Widyanisa,
  • Wan-Ting Chiu,
  • Akira Umise and ,
  • Masaki Tahara and
  • Hideki Hosoda
  • + 1 author+ 0 author

22 June 2023

The phase stability, mechanical properties, and functional properties of Ti–5.5Al–11.8[Mo]eq alloys are focused on in this study by substituting 3d transition metal elements (V, Cr, Co, and Ni) for Mo as β-stabilizers to achieve simi...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
18 Citations
3,487 Views
11 Pages

Fabrication of Multi-Layer Metal Oxides Structure for Colored Glass

  • Akpeko Gasonoo,
  • Hyeon-Sik Ahn,
  • Eun-Jeong Jang,
  • Min-Hoi Kim and ,
  • Jin Seog Gwag,
  • Jae-Hyun Lee and
  • Yoonseuk Choi
  • + 2 authors+ 0 author

7 May 2021

This study proposes front colored glass for building integrated photovoltaic (BIPV) systems based on multi-layered derivatives of glass/MoO3/Al2O3 with a process technology developed to realize it. Molybdenum oxide (MoO3) and aluminum oxide (Al2O3) l...

(This article belongs to the Special Issue Soft Materials and Optical Devices)
  • Article
  • Open Access
20 Citations
5,004 Views
15 Pages

Studies on Electronic Structure and Optical Properties of MoS2/X (X = WSe2, MoSe2, AlN, and ZnO) Heterojunction by First Principles

  • Jibo Liu,
  • Yuheng Jin,
  • Bocheng Lei,
  • Xucai Zhao and ,
  • Yineng Huang,
  • Lili Zhang and
  • Youliang Zhu
  • + 2 authors+ 0 author

1 October 2024

The single-layer MoS2 is a highly sought-after semiconductor material in the field of photoelectric performance due to its exceptional electron mobility and narrow bandgap. However, its photocatalytic efficiency is hindered by the rapid recombination...

(This article belongs to the Special Issue Photocatalytic Nanomaterials for Environmental Purification)
  • Article
  • Open Access
11 Citations
5,930 Views
16 Pages

Fully Oxidized and Mixed-Valent Polyoxomolybdates Structured by Bisphosphonates with Pendant Pyridine Groups: Synthesis, Structure and Photochromic Properties

  • Olivier Oms,
  • Tarik Benali,
  • Jérome Marrot,
  • Pierre Mialane and ,
  • Marin Puget,
  • Hélène Serier-Brault,
  • Philippe Deniard,
  • Rémi Dessapt and
  • Anne Dolbecq
  • + 4 authors+ 0 author

11 June 2015

Hybrid organic-inorganic polyoxometalates (POMs) were synthesized in water by the reaction of a MoVI precursor with bisphosphonate ligands functionalized by pyridine groups. The fully oxidized POM [(MoVI3O8)2(O)(O3PC(O)(C3H6NH2CH2C5H4NH)PO3)2]4− has...

(This article belongs to the Special Issue Polyoxometalates)
  • Article
  • Open Access
5 Citations
3,656 Views
19 Pages

Phase-Field Simulation of the Microstructure Evolution in the Eutectic Alloy NiAl-31Cr-3Mo

  • Michael Kellner,
  • Camelia Schulz,
  • Alexander Kauffmann,
  • Martin Heilmaier and
  • Britta Nestler

1 July 2023

The directionally solidified eutectic alloy NiAl-(Cr,Mo) is a promising candidate for structural applications at high temperatures, due to its increased creep resistance compared to its single phase B2ordered NiAl counterpart. This system yields an e...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
7 Citations
4,027 Views
10 Pages

28 April 2023

Aluminum nitride (AlN) thin film/molybdenum (Mo) electrode structures are typically required in microelectromechanical system applications. However, the growth of highly crystalline and c-axis-oriented AlN thin films on Mo electrodes remains challeng...

(This article belongs to the Special Issue Advanced Thin-Films: Design, Fabrication and Applications)
  • Article
  • Open Access
13 Citations
2,812 Views
22 Pages

A Highly Active NiMoAl Catalyst Prepared by a Solvothermal Method for the Hydrogenation of Methyl Acrylate

  • Taolue Sun,
  • Gang Wang,
  • Xinpeng Guo,
  • Zengxi Li and ,
  • Erqiang Wang and
  • Chunshan Li
  • + 1 author+ 0 author

27 September 2022

In this study, a series of Ni10MoxAl composite metal oxide (Ni10MoxAl, NiO = 10 wt.%, x = 2.5, 5, 10, 15, 20 wt.%) catalysts with different Mo content were prepared by a solvothermal method using a water—ethanol system. By employing various cha...

(This article belongs to the Section Catalytic Reaction Engineering)
  • Article
  • Open Access
1,033 Views
20 Pages

11 February 2026

Vanadium (V), molybdenum (Mo), iron (Fe), and aluminum (Al) are crucial alloying elements in certain high-performance titanium alloys. Traditionally, these elements are added to titanium alloys in the form of binary master alloys such as V-Al, Mo-Al,...

(This article belongs to the Special Issue Green Metallurgy and High-Temperature Process Control: Innovations in Sustainable Techniques)
  • Article
  • Open Access
4 Citations
3,495 Views
11 Pages

Chemical Vapor Deposition of Uniform and Large-Domain Molybdenum Disulfide Crystals on Glass/Al2O3 Substrates

  • Qingguo Gao,
  • Jie Lu,
  • Simin Chen,
  • Lvcheng Chen and ,
  • Zhequan Xu,
  • Dexi Lin,
  • Songyi Xu,
  • Ping Liu,
  • Xueao Zhang and
  • Chongfu Zhang
  • + 6 authors+ 1 author

7 August 2022

Two-dimensional molybdenum disulfide (MoS2) has attracted significant attention for next-generation electronics, flexible devices, and optical applications. Chemical vapor deposition is the most promising route for the production of large-scale, high...

  • Article
  • Open Access
1 Citations
1,258 Views
14 Pages

First-Principles Study of AlCrFeMoTi High-Entropy Alloys

  • Xiao Hu,
  • Yilong Liu,
  • Yunyun Wu,
  • Shuliang Zou and ,
  • Weiwei Xiao and
  • Jinghao Huang
  • + 1 author+ 0 author

14 November 2025

The AlCrFeMoTi high-entropy alloy exhibits promising application potential as a corrosion-resistant structural material in advanced nuclear energy systems, particularly in lead–bismuth fast reactors. In this present study, first-principles calc...

(This article belongs to the Special Issue Feature Papers in Section "Engineering and Materials" 2025)
  • Article
  • Open Access
5 Citations
3,263 Views
25 Pages

10 July 2024

Accurate calculation of non-covalent interaction energies in nucleotides is crucial for understanding the driving forces governing nucleic acid structure and function, as well as developing advanced molecular mechanics forcefields or machine learning...

  • Article
  • Open Access
12 Citations
4,975 Views
10 Pages

Synthesis of Complex-Alloyed Nickel Aluminides from Oxide Compounds by Aluminothermic Method

  • Victor Gostishchev,
  • Ernst Ri,
  • Hosen Ri,
  • Evgeniy Kim and ,
  • Michail Ermakov,
  • Sergey Khimukhin,
  • Vladislav Deev and
  • Evgeny Prusov
  • + 3 authors+ 0 author

9 June 2018

This paper deals with the investigation of complex-alloyed nickel aluminides obtained from oxide compounds by aluminothermic reduction. The aim of the work was to study and develop the physicochemical basis for obtaining complex-alloyed nickel alumin...

  • Article
  • Open Access
19 Citations
3,513 Views
13 Pages

Effect of Al Content on Phase Compositions of FeNiCoCrMo0.5Alx High Entropy Alloy

  • Anton Semikolenov,
  • Svetlana Shalnova,
  • Victor Klinkov,
  • Valentina Andreeva and ,
  • Maria Salynova,
  • Tatiana Larionova and
  • Oleg Tolochko
  • + 2 authors+ 0 author

29 October 2021

The FeCoNiCrMo0.5Alx system with x up to 2.13 was analyzed from the point of view of evolution of the phase composition and microstructure. Cast samples were synthesized by induction melting and analyzed by X-ray diffraction, energy dispersive spectr...

(This article belongs to the Special Issue Advanced Manufacturing of Novel Metallic Related Materials)
  • Article
  • Open Access
37 Citations
5,446 Views
10 Pages

18 August 2018

The structural stability, mechanical properties, and Debye temperature of alloying elements X (X = Sc, Ti, Co, Cu, Zn, Zr, Nb, and Mo) doped Al3Li were systematically investigated by first-principles methods. A negative enthalpy of formation ΔH...

  • Article
  • Open Access
5 Citations
3,500 Views
30 Pages

NiAl-Cr-Mo Medium Entropy Alloys: Microstructural Verification, Solidification Considerations, and Sliding Wear Response

  • Christina Mathiou,
  • Konstantinos Giorspyros,
  • Emmanuel Georgatis,
  • Anthoula Poulia and
  • Alexander E. Karantzalis

5 August 2020

A series of NiAl-Cr-Mo systems were produced and assessed as far as their microstructure and their sliding wear resistance is concerned. The NiAl content was kept constant and seven compositions of Cr-Mo were tested, namely, 40Cr-0Mo, 30Cr-10Mo, 25Cr...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
13 Citations
3,360 Views
19 Pages

Enhanced Adsorption of Methyl Orange by Mongolian Montmorillonite after Aluminum Pillaring

  • Jiajun Chen,
  • Jianzun Lu,
  • Lingcheng Su,
  • Huada Ruan and ,
  • Yijia Zhao,
  • Chiuhong Lee,
  • Zongwei Cai,
  • Zhihui Wu and
  • Yanan Jiang
  • + 4 authors+ 0 author

21 March 2022

This article studies the enhancement of methyl orange (MO) adsorption by Mongolian montmorillonite (MMt) modified by the intercalation of the Keggin Al13 complex, followed by calcination during the pillaring process. The properties of MMt, Al-interca...

  • Article
  • Open Access
994 Views
23 Pages

Microstructural Observations, Mechanical Hierarchy, and Tribological Performance in CrFeMoV-Alx High-Entropy Alloys

  • Anthoula Poulia,
  • Maria-Nikoleta Zygogianni,
  • Christina Mathiou,
  • Emmanuel Georgatis and ,
  • Stavros Kiape,
  • Spyros Kamnis and
  • Alexander E. Karantzalis
  • + 2 authors+ 0 author

27 January 2026

This work investigates the synthesis, thermodynamic phase stability and microstructural, mechanical and tribological behavior of the CrFeMoV alloy system and its Al-modified derivatives, CrFeMoV-Al2 and CrFeMoV-Al6, which belong to the family of high...

(This article belongs to the Special Issue Microstructure and Mechanical Behaviour of Structural Materials: 3rd Edition)
  • Article
  • Open Access
21 Citations
6,325 Views
15 Pages

Hydrotreating of Light Cycle Oil over Supported on Porous Aromatic Framework Catalysts

  • Eduard Karakhanov,
  • Anton Maximov,
  • Yulia Kardasheva,
  • Maria Vinnikova and
  • Leonid Kulikov

14 September 2018

The hydroprocessing of substituted naphthalenes and light cycle oil (LCO) over bimetallic Ni-W-S and Ni-Mo-S catalysts that were obtained by decomposition of [N(n-Bu)4]2[Ni(MeS4)2] (Me = W, Mo) complexes in situ in the pores of mesoporous aromatic fr...

  • Article
  • Open Access
31 Citations
4,217 Views
13 Pages

In recent years, the application of environmentally friendly cutting fluids in the metal cutting industry has been a growing concern in all over the world. In this study, the minimum quantity cooling lubrication (MQCL) technique, which uses very smal...

(This article belongs to the Special Issue Advanced Industrial Lubricants and Future Development Trends of Tribo-Systems for Tribological Performance Evaluation)
  • Feature Paper
  • Article
  • Open Access
7 Citations
5,148 Views
25 Pages

Hydrodesulfurization of 4,6-Dimethyldibenzothiophene and the Diesel Oil Fraction on NiMo Catalysts Supported over Proton-Exchanged AlMCM-41 and TiMCM-41 Extrudates

  • Karolina Jaroszewska,
  • Marek Lewandowski,
  • Kinga Góra-Marek,
  • Jolanta Grzechowiak and
  • Gérald Djéga-Mariadassou

9 September 2021

NiMo catalysts supported on mesoporous MCM-41 type materials shaped with binder were tested for activity in the hydrodesulfurization of 4,6-dimethyldibenzothiophene (4,6-DMDBT) and the diesel fuel fraction (0.92 wt% of sulfur). The aim of the investi...

(This article belongs to the Special Issue Structured Materials for Catalytic Applications)
  • Article
  • Open Access
14 Citations
2,854 Views
11 Pages

10 September 2019

Green tribology film comprising hydroxypropyl methylcellulose modified with nanoparticles and molybdenum disulfide was prepared by the solvent evaporation method. The nanoparticle additives were Al, Cu, Al2O3, and CuO. The tribological behavior of na...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
3 Citations
1,872 Views
14 Pages

10 February 2025

Heavy metal cations such as Ag+, Pb2+, and Hg2+ can accumulate in living organisms, posing severe risks to biological systems, including humans. Therefore, removing heavy metal cations from wastewater is crucial before discharging them to the environ...

(This article belongs to the Section Inorganic Solid-State Chemistry)
  • Article
  • Open Access
2 Citations
1,461 Views
15 Pages

15 April 2025

In this work, two alloys of Ni35Al30(FeCo)25Cr10-xMox (x = 0, 5) were prepared via the vacuum arc melting method, and the effects of Mo on the microstructure, mechanical properties, and friction and wear properties of the alloys were investigated. Th...

  • Article
  • Open Access
4 Citations
2,348 Views
13 Pages

Influence of Carbonization Conditions on Structural and Surface Properties of K-Doped Mo2C Catalysts for the Synthesis of Methyl Mercaptan from CO/H2/H2S

  • Xiangqian Zheng,
  • Tianhao Ai,
  • Yuhong Hu,
  • Zhizhi Xu and ,
  • Yubei Li,
  • Huan Jiang and
  • Yongming Luo
  • + 2 authors+ 0 author

21 September 2023

The cooperative transition of sulfur-containing pollutants of H2S/CO/H2 to the high-value chemical methyl mercaptan (CH3SH) is catalyzed by Mo-based catalysts and has good application prospects. Herein, a series of Al2O3-supported molybdenum carbide...

(This article belongs to the Special Issue Nanocatalysts for Air Purification)
  • Article
  • Open Access
25 Citations
6,518 Views
16 Pages

Co-Processing of Jatropha-Derived Bio-Oil with Petroleum Distillates over Mesoporous CoMo and NiMo Sulfide Catalysts

  • Shih-Yuan Chen,
  • Masayasu Nishi,
  • Takehisa Mochizuki,
  • Hideyuki Takagi and ,
  • Akira Takatsuki,
  • Wuttichai Roschat,
  • Makoto Toba and
  • Yuji Yoshimura
  • + 3 authors+ 0 author

2 February 2018

The co-processing of an unconventional type of Jatropha bio-oil with petroleum distillates over mesoporous alumina-supported CoMo and NiMo sulfide catalysts (denoted CoMo/γ-Al2O3 and NiMo/γ-Al2O3) was studied. Either a stainless-steel high-pressure b...

(This article belongs to the Section Environmental Catalysis)
  • Article
  • Open Access
12 Citations
1,643 Views
22 Pages

30 September 2025

Recent literature reports have shown that individual HEAs, especially those of the AlCoCrFeNi composition system alloyed with appropriately selected elements, exhibit excellent mechanical properties and corrosion resistance, making them promising can...

(This article belongs to the Special Issue Corrosion, Fatigue and Corrosion Protection of Metals and Their Alloys in Various Environments (2nd Edition))
  • Article
  • Open Access
5 Citations
2,984 Views
11 Pages

30 November 2019

In this paper, an Al2O3 coated CaF2 (CaF2@Al2O3) nanocomposite powder is used as the additive phase of a Ti(C,N)-based self-lubricating cermet material. A novel self-lubricating ceramic material with a multilayer core–shell microstructure was p...

  • Feature Paper
  • Article
  • Open Access
4 Citations
4,632 Views
12 Pages

Clean Syn-Fuels via Hydrogenation Processes: Acidity–Activity Relationship in O-Xylene Hydrotreating

  • Alessandra Palella,
  • Katia Barbera,
  • Francesco Arena and
  • Lorenzo Spadaro

Transition metal sulfide catalysts are actually the most performing catalytic materials in crude oil hydrotreating (HDT), for energetic purposes. However, these systems suffer from several drawbacks that limit their exploitation. Aiming to meet the e...

  • Article
  • Open Access
4 Citations
2,401 Views
15 Pages

21 September 2023

Deposition of (Ti-Al)N/MoN multilayered coatings was carried out through a cathodic ion-plating system in an argon and then nitrogen atmosphere. Bilayer thickness (Λ) of all the samples were achieved, from 22 to 104 nm, by organizing substrate...

(This article belongs to the Collection Feature Paper Collection in Plasma Coatings, Surfaces & Interfaces)
  • Article
  • Open Access
7 Citations
3,385 Views
11 Pages

Film-forming techniques and the control of heat release in micro-energetic chips or devices create challenges and bottlenecks for the utilization of energy. In this study, promising nano-Al/MoO3 metastable intermolecular composite (MIC) chips with an...

(This article belongs to the Special Issue Nanoenergetic Materials: Preparation, Properties, and Applications)
  • Article
  • Open Access
1 Citations
1,199 Views
35 Pages

Sustainability-Oriented Oxidative Desulfurization of Light Gas Oil Using a MoO3–Fe2O3/Al2O3–Carbon Nanofiber Nanocomposite Catalyst: Performance, Kinetic Modeling, and Process Optimization

  • Aysar T. Jarullah,
  • Ban A. Al-Tabbakh,
  • Helal A. A. Saleem,
  • Shymaa A. Hameed and ,
  • Liqaa I. Saeed,
  • Jasim I. Humadi,
  • Mudhar A. Al-Obaidi,
  • Dhifaf Sadeq,
  • Alhassan H. Ismail and
  • Iqbal M. Mujtaba
  • + 6 authors+ 1 author

In the present study, a kinetic model was developed for the process of oxidative desulfurization of light gas oil with 7329 ppm sulfur using a newly synthesized nanocomposite catalyst. The batch reactor experiments were conducted at different thermal...

(This article belongs to the Special Issue Innovative Green Technologies and Sustainable Solutions for Environmental Challenges)
  • Feature Paper
  • Article
  • Open Access
8 Citations
4,971 Views
13 Pages

16 October 2018

Brazing of titanium provides a joining technique suitable for the fabrication of highly-loaded aerospace components, but it still poses numerous challenges, such as the formation of brittle intermetallic interphases. This study of the interphase form...

(This article belongs to the Special Issue Diffusion Bonding and Brazing of Advanced Materials)
  • Communication
  • Open Access
7 Citations
3,937 Views
9 Pages

Cost-Effective 1T-MoS2 Grown on Graphite Cathode Materials for High-Temperature Rechargeable Aluminum Ion Batteries and Hydrogen Evolution in Water Splitting

  • Shivaraj B. Patil,
  • Ji-Yao An,
  • Zhi-Jie Li,
  • Yu-Cheng Wu and ,
  • Swathi M. Gowdru,
  • Han-Hsuan Hsieh,
  • Zhen Chen and
  • Di-Yan Wang
  • + 3 authors+ 0 author

19 December 2021

The high dependence on and high cost of lithium has led to a search for alternative materials. Aluminum ion batteries (AIBs) have gained interest due to their abundance, low cost, and high capacity. However, the use of the expensive 1-ethyl-3-methyli...

  • Article
  • Open Access
8 Citations
3,154 Views
17 Pages

Characteristics and Cutting Performance of CVD Al2O3 Multilayer Coatings Deposited on Tungsten Carbide Cutting Inserts in Turning of 24CrMoV5-1 Steel

  • Maoxiang Zhu,
  • Soufyane Achache,
  • Mariane Prado Motta,
  • Alexandre Delblouwe and ,
  • Cyril Pelaingre,
  • Alexis Carlos García-Wong,
  • Jean-François Pierson and
  • Frédéric Sanchette
  • + 3 authors+ 0 author

In this work, TiN/Ti(C,N)/Al2O3 multilayer coatings were deposited using an industrial-scale thermal CVD system. Two polymorphs of Al2O3, the stable α- and the metastable κ-Al2O3, were obtained by the deposition of specific bonding layers...

(This article belongs to the Special Issue Ceramic Films and Coatings: Properties and Applications)
  • Article
  • Open Access
2 Citations
3,384 Views
13 Pages

Adhesion Strength of Al, Cr, In, Mo, and W Metal Coatings Deposited on a Silicon–Carbon Film

  • Natalia Igorevna Cherkashina,
  • Vyacheslav Ivanovich Pavlenko,
  • Sergey Viktorovich Zaitsev,
  • Andrey Ivanovich Gorodov and ,
  • Semen Nikolayevich Domarev,
  • Roman Vladimirovich Sidelnikov and
  • Dmitry Sergeevich Romanyuk
  • + 2 authors+ 0 author

2 August 2023

For the first time, the possibility of creating a multilayer system metal (Al, Cr, In, Mo, and W) silicon–carbon coating was studied. A silicon–carbon film was synthesized from a polyorganosiloxane polymer containing an active Si–O...

(This article belongs to the Special Issue Carbon and Carbon-Based Composite Thin Films/Coatings: Synthesis, Properties and Applications)
  • Article
  • Open Access
4 Citations
3,049 Views
12 Pages

Mechanisms of Premature Fracture in Modular Neck Stems Made of CoCrMo/Ti6Al4V and Ti6Al4V/Ti6Al4V Alloy

  • Drago Dolinar,
  • Miro Gorenšek,
  • Klemen Avsec,
  • Barbara Šetina Batič and ,
  • Matej Hočevar,
  • Matjaž Godec,
  • Borut Žužek,
  • Mojca Debeljak,
  • Monika Jenko and
  • Boštjan Kocjančič
  • + 6 authors+ 1 author

16 July 2023

In this paper, we present the mechanisms of premature fracture of modular neck stems in two case studies: (I) when the neck and stem are both made of the same Ti6Al4V alloy, and (II) when the neck and stem are made from two different alloys, CoCrMo a...

(This article belongs to the Special Issue Toward Sustainability through Bio-Based Materials at the Interfaces with Living Systems)

of 5