In this work, AA1070 aluminium alloy sheets are joined using TIG and MIG welding after three different edge preparations. Shearing, water jet and plasma-cut processes were used to cut sheets, subsequently welded using ER5356 and ER4043 filler metals...
In this study, the friction-stir welding (FSW) technique was successfully applied for joining of AA2519 to AA5181 alloy. Microstructure and mechanical properties of dissimilar FSW joints were investigated by optical microscopy, microhardness, and ten...
This study aims to explore the effects of various pre- and post-weld heat treatments (PWHTs) on the microstructural and mechanical properties of dissimilar aluminium alloys, namely AA7075 and AA2024, joined through rotary friction welding. The joints...
The present work aims to investigate the changes in the microstructural and mechanical properties of various pre- and post weld heat treatments (PWHTs) on rotary friction welded dissimilar (AA7075 and AA5083) aluminum alloys. The investigation focuse...
Due to the rising need for energy saving, high-performing automotive heat exchangers, demand has significantly grown in recent years. As a result, effective fin-tube heat exchangers are becoming more popular. These tubes are typically made by rolling...
In this work, rotary friction welding processes of dissimilar AA7075/AA5083 aluminium alloy rods with the diameter of 15 mm were performed at varying rotational speeds, typically 370 to 2500 rpm. The aim of this research is to improve mechanical prop...
Multilayer composite materials, consisting of layers of aluminum alloy and steel, are used in the manufacturing of large engineering structures, including in the shipbuilding and railcar industries. Due to the different properties of aluminum alloys...
In this study, AA1050/AA6061 laminated composites were prepared by three-cycle accumulative roll bonding (ARB) and subsequent rolling. The effects of the rolling process on the microstructure evolution and mechanical properties of AA1050/AA6061 lamin...
Friction stir welding (FSW) of dissimilar aluminium alloys often results in non-uniform microstructure and hardness distributions due to asymmetric temperature fields and material flow. The objective of this study is to establish a quantitative relat...
Aircraft skin and stringer elements are typically fabricated from 2xxx and 7xxx series high strength aluminum alloys. A single friction stir welding (FSW) pass using a specially designed tool with shoulder/pin diameter ratio (D/d) of 3.20 is used to...
This study investigates the effect of Gas Metal Arc Welding (GMAW) parameters on solidification cracking and mechanical behavior of AA6061 and AA7075 aluminum alloys, which are widely used in automotive, aerospace, and battery-related applications du...
This study investigates the new surface development on AA6061 and AA5086 alloys considering the wire-arc additive manufacturing technique as a direct energy deposition (DED) process of wire. Two different quantities of MWCNTs, i.e., 0.01 (low) and 0....
Solid-state welding processes, particularly friction-stir welding (FSW), offer significant advantages for joining different aluminum alloys due to their good mechanical performance, energy efficiency, and cost-effectiveness. The FSW of the AA5052-H32...
Since their development, third-generation aluminum–lithium alloys have been used in aeronautical and other applications due to their good properties, replacing conventional Al-Cu and Al-Zn alloys and resulting in an increase in payload and fuel...
Background: Mpp46Aa1 (formerly PS2Aa1) is a β-pore-forming protein produced by Bacillus thuringiensis that exhibits selective cytotoxicity against cancer cells. Protein engineering has generated variants with improved antitumor activity, includi...
The beetle Anthonomus grandis Boheman, 1843, is the main cotton pest, causing enormous losses in cotton. The breeding of genetically modified plants with A. grandis resistance is seen as an important control strategy. However, the identification of m...
The toxicity of the Bacillus thuringiensis (Bt) toxin Cry3Aa—originally used against the main potato pest, the Colorado potato beetle, Leptinotarsa decemlineata—was verified on this species and then evaluated against the Egyptian armyworm, Spodoptera...
In the current study, solid-state additive manufacturing (SSAM) of two temper conditions AA2011 was successfully conducted using the friction stir deposition (FSD) process. The AA2011-T6 and AA2011-O consumable bars of 20 mm diameter were used as a f...
This study investigated the deformation behavior and damage evolution of AA7075-T6, Anodized AA6061-T6-T6 (oxide layer with an average thickness of 8.71 µm), and Al-15 vol.% SiC-T4 (particle size range of 3.1–8.3 µm) under scratch,...
Friction stir welding (FSW) has emerged as a solid-state joining technique offering notable advantages over traditional welding methods. Gas metal arc welding (GMAW), a fusion-based process, remains widely used due to its high efficiency, productivit...
Androctonus australis Hector insect toxin (AaIT), an insect-selective toxin, was identified in the venom of the scorpion Androctonus australis. The exclusive and specific target of the toxin is the voltage-gated sodium channels of the insect, resulti...
Grade C molar-incisor pattern periodontitis (C-MIP) is a rapidly progressive form of periodontal disease affecting young individuals that is often linked to a highly virulent genotype of Aggregatibacter actinomycetemcomitans (Aa). Although Aa is pres...
In this work, a unique approach was used to synthesise black coatings on aluminium alloys (AA) 6061 and 7075 for applications in the aerospace field. In detail, plasma electrolytic oxidation (PEO) technology was used, maintaining the voltage constant...
In this study, AA5083–WC composites were developed by ball milling followed by hot consolidation. The microstructures of the developed composites were investigated using XRD, SEM, EDX, and EBSD. The developed composites exhibited a homogeneous...
This paper first presents the results of an experimental study into the damage tolerance of AA7075-T6, which is widely used in both fixed- and rotary-wing aircraft, space structures, and laser bed powder fusion (LBPF) Scalmalloy specimens built by Bo...
AA9 lytic polysaccharide monooxygenases (LPMOs) are copper-dependent metalloenzymes that play a major role in cellulose degradation and plant infection. Understanding the AA9 LPMO mechanism would facilitate the improvement of plant pathogen control a...
Explosively welded layered materials made of (a) an AA2519 aluminum alloy (AlCuMgMn + ZrSc), (b) titanium alloy Ti6Al4V and (c) an intermediate layer composed of a thin aluminum alloyed AA1050 layer are considered herein. This study presents test res...
Actinidia arguta (A. arguta) is a kind of climacteric fruit that quickly softens and limits fruit shelf-life and commercial value. Therefore, it is of great significance to develop kiwifruit genotypes with an extended shelf-life of fruit. However, th...
In the aircraft industry, the high-strength aluminum alloys AA7075 and AA2024 are extensively used for the manufacture of structural parts like stringers and skins, respectively. Additive manufacturing (AM) of the AA7075-T6 aluminum alloy via frictio...
Evolution of resistance by pests can reduce the benefits of crops genetically engineered to produce insecticidal proteins from Bacillus thuringiensis (Bt). Because of the widespread resistance of Helicoverpa zea to crystalline (Cry) Bt toxins in the...
The effects of 0.1 wt.% Sc and 0.1 wt.% Zr addition in AA5182 on microstructure and mechanical properties were investigated. Results show that Al3(ScxZr1−x) dispersoids formed in AA5182. Observation of ingots microstructures showed that the grain siz...
The cotton bollworm Helicoverpa armigera (Hübner) is one of the most damaging cotton pests worldwide. In China, control of this pest has been dependent on transgenic cotton producing a single Bacillus thuringiensis (Bt) protein Cry1Ac since 1997. A s...
The vegetative insecticidal protein Vip3Aa from Bacillus thuringiensis (Bt) has become a key plant-incorporated protectant (PIP) in transgenic crops targeting lepidopteran pests, particularly as resistance increasingly compromises the efficacy of Cry...
In this work, the influence of bending an AA5457 alloy sheet and the resulting microstructural changes on its corrosion behavior was investigated. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to perform deta...
Bacillus thuringiensis (Bt) secretes the nutritional insecticidal protein Vip3Aa11, which exhibits high toxicity against the fall armyworm (Spodoptera frugiperda). The Bt HD270 extracellular polysaccharide (EPS) enhances the toxicity of Vip3Aa11 prot...
31 March 2021
In the present study we investigated the ability of the microalgal strain Parachlorella sp. AA1 to biologically uptake a radionuclide waste material. Batch experiments were conducted to investigate the biosorption of uranyl ions (U(VI)) in the 0.5–50...
The feasibility of butt friction stir welding (FSW) of a metal matrix composite (MMC) with a very high SiC particle content to a monolithic aluminum alloy is tested in this work. It is demonstrated for the first time that sound FSW joints can be obta...
Tpp80Aa1 from Bacillus thuringiensis is a Toxin_10 family protein (Tpp) with reported action against Culex mosquitoes. Here, we demonstrate an expanded target range, showing Tpp80Aa1 is also active against the larvae of Anopheles gambiae and Aedes ae...
Bradysia difformis is a notorious pest in mushroom production in China. Biological control using Bacillus thuringiensis (Bt) offers an environmentally friendly and effective strategy against this pest. Here, we show that the complete genome of strain...
6 January 2024
The Autodetermination At School (AAS) hetero-evaluative scale was created and validated in a French teacher population with the aim of quantifying, in an ecological way, the commitment at school of elementary students. After establishing the scale&rs...
The fall armyworm (FAW), Spodoptera frugiperda (J.E. Smith), is one of the most important insect pests affecting corn crops worldwide. Although planting transgenic corn expressing Bacillus thuringiensis (Bt) toxins has been approved as being effectiv...
In recent years, many alloys as well as composites of aluminium were developed for enhanced material performance. AA 6061 is an aluminium alloy that has extensive applications due to its superior material characteristics. It is a popular choice of ma...
Vip3Aa, a soluble protein produced by certain Bacillus thuringiensis strains, is capable of inducing apoptosis in Sf9 cells. However, the apoptosis mechanism triggered by Vip3Aa is unclear. In this study, we found that Vip3Aa induces mitochondrial dy...
A cold-adapted siphovirus, vB_PagS_AAS23 (AAS23) was isolated in Lithuania using the Pantoea agglomerans strain AUR for the phage propagation. The double-stranded DNA genome of AAS23 (51,170 bp) contains 92 probable protein encoding genes, and no gen...
In this study, corrosion-resistant AA5083—BN/WC composites were developed for tribological applications through adequate control of the reinforcement content (WC and BN) in the matrix (AA5083 alloy). The effects of 6% and 12% tungsten carbide (...
Discovering new antifungal agents is difficult, since, unlike bacteria, mammalian and fungal cells are both eukaryotes. An efficient strategy is to consider new antimicrobial proteins that have variety of action mechanisms. In this study, a cDNA enco...
Chinese chive (Allium tuberosum) suffers severe yield and quality losses from white leaf spot disease caused by Alternaria alternata. Spray-induced gene silencing (SIGS) presents a sustainable alternative to traditional chemical fungicides. To maximi...
The effect of heat treatment condition on non-Cu AA7021 alloy was investigated with respect to mechanical properties and very high cycle fatigue behavior. With a focus on the influence of heat treatment, AA7021 alloy was solution heat-treated at 470...
Vegetative insecticidal proteins (Vips), which are secreted by some Bacillus thuringiensis strains during vegetative growth, exhibit high virulence to many pests. Vip3A proteins have been used commercially both in some bio-insecticides and in transge...
This study examined the effects of heat treatment on the microstructure and dynamic deformation characteristics of AA2519 aluminum alloy in T4, T6, and T8 tempers under high strain rates of 1000–4000 s−1. A Split Hopkinson pressure bar (S...
of 174