Talc is a naturally hydrophobic gangue mineral in most sulfide ores. However, talc has vast applications in the cosmetics, paper, and paint industries due to its high chemical stability, and its demand continues to grow. Since flotation is the most e...
A large amount of the polypropylene (PP) produced worldwide is used in the form of fibers. In this work, a new modification route for talc and PP is investigated, which is based on the in situ polymerization of a silane–siloxane monomer mixture...
Black talc is a natural silicate clay mineral with a typical 2:1 layered structure, low electrical conductivity, large specific surface area, and high thermal stability. The world’s largest black talc mine, with known reserves of one billion to...
This paper investigated the effects of using or not using potassium butyl xanthate (PBX) as a collector on the flotation kinetics of talc and chalcopyrite. By means of atomic force microscopy (AFM), Fourier-transform infrared spectroscopy (FTIR), a c...
The system dynamics applied in this research on modeling a tourist destination (area) life cycle (TALC) contributes to understanding its behavior and the way that information feedback governs the use of feedback loops, delays and stocks and flows. On...
A detailed petrographical, mineralogical, morphological, geochemical and physicochemical characterization of talc from an Argentinean ore is presented. This deposit is located in the San Juan province at the foothills of the Andes. Characterization w...
In this work, the adsorption of Cr(VI) ions and the organic dye Alizarin Red S (ARS) was investigated using magnetite talc (Fe3O4@Talc) nanocomposite. Different characterization techniques such as scanning electron microscopy (SEM), Fourier transform...
This study examines the environmental risks associated with talc mining in Slovakia, focusing on various aspects. It applies a structured risk assessment methodology to evaluate the probability and severity of environmental impacts stemming from talc...
Background: Pleurodesis is a treatment method that aims to create permanent adhesion between the pleural layers to prevent recurrent fluid or air accumulation in the pleural cavity. Talc, one of the most commonly preferred agents in this procedure, i...
In this study, raw talc powder surface modification was conducted, and the powder was modified in two different methods using acid washing and ball milling. Modified talc was characterized by X-ray diffraction (XRD), Fourier transforms infrared spect...
Pyrophyllite and talc are both tetrahedra–octahedra–tetrahedra (TOT)-type phyllosilicates, but differences can be found in the stacking mode of the layers and the ion occupation. Fourier transform infrared spectroscopy was used to differe...
Interstratifications of talc and trioctahedral smectites from different provenances are used as indicators for geological environments and for geotechnical and technical applications. However, comprehensive layer characterization of these interstrati...
In the presented work the influence of different 3MgO·4SiO2·H2O (talc) contents in polypropylene samples on the structure, hardness, elasticity, and friction of the surface layer was investigated. The talc content ranged from 0 to 25 wt...
The effect of talc addition on the morphology of capillary membranes formed by a thermally induced phase separation (TIPS) method was investigated in the presented work. The usability of such formed membranes for membrane distillation was evaluated....
The detailed mineralogical, physical and chemical characterization of nine samples of imported cosmetic talc and of two samples of talc from currently non-productive Mexican ore deposits (Oaxaca and Puebla States) is presented. The imported cosmetic...
The influence of filler particle size on selected physicochemical and functional properties of polymer composites was analyzed. The following test was carried out for the system: the bisphenol A glycerolate (1 glycerol/phenol) di-methacrylate (BPA.DM...
The article describes new silicone self-adhesive adhesives modified with the addition of talc. The obtained self-adhesive materials were characterized to determine their adhesive properties (adhesion, cohesion, and adhesion) and functional properties...
As a major gangue mineral in sulfide ores, talc is difficult to separate from chalcopyrite in the flotation process due to its natural floatability, which affects the subsequent smelting process. In this study, the effects of calcium ions and calcium...
In this study, waterborne polyurethane (WPU), a novel modifier, was used for the wet surface modification of talc, and its mechanism was investigated. Polypropylene (PP)-based composites with modified talc were synthesized and subjected to an examina...
The properties and preparation of talc have long been investigated due to its diverse industrial applications, which have expanded recently. However, its comminution behavior is not yet fully understood. Therefore, having better control of the partic...
Herein, using black talc as a carrier, a ternary black talc-TiO2/ZnO composite photocatalyst was prepared by the sol-gel method, and the effect of the black talc on the hetero-structure properties of the TiO2 and ZnO was systematically studied. The p...
Methane hydrates in natural geological settings are commonly distributed within sediments, with a variety of minerals (such as silica sand, talc, and montmorillonite). The mechanisms that control the influence of sediments on methane hydrate formatio...
Talc deposits of Jahazpur, Rajasthan, hosted by dolomite, are one of the largest high-quality talc deposits in India. In the present study, we use AVIRIS-NG datasets to study the link between the spatial pattern of talc mineralization, associated alt...
In this study, a new approach, “dynamic wettability”, and atomic force microscopy (AFM) imaging analysis techniques were successfully used to characterize the hydrophobization mechanism of the collector dodecylamine (DDA) on muscovite and...
The flotation and adsorption of a new polysaccharide konjac gum (KG) on pyrite and talc in the presence of pre-adsorbed potassium butyl xanthate (PBX) is investigated. The micro-flotation results show that KG is a quality depressant for talc and that...
In this paper, a TiO2/black talc composite photocatalyst was prepared by the sol-gel method using TBOT as titanium source and black talc as carrier. Rhodamine B was used as the targeted pollutant to study the adsorption role of carbon in black talc....
The effect of talc in the two mixtures with the representative sample of fly ash (Class F) was investigated at sintering temperatures of 1000, 1100, and 1200 °C. X-ray diffraction, thermal DTA/TGA, and mercury intrusion porosimetry analyses were appl...
This study aims to assess the effectiveness of water-based formulations featuring m-2HEAOL and talc particles in deep drawing applications. The coefficient of friction (COF) was measured through bending under tension (BUT) tests, while the interactio...
Flotation behavior of different sizes of particles may follow different trends. The influence of particle size in talc suppression by a depressant galactomannan was studied in this research. The flotation response and mechanism were examined by flota...
Currently, scientists are still looking for new polymeric materials characterized by improved mechanical, thermal as well as dielectric properties. Moreover, it should be stressed that new composites should be environmentally friendly. For this reaso...
A talc-like magnesium phyllosilicate functionalized with amine groups (TalcNH2), useful as sensor material in voltammetry stripping analysis, was synthesized by a sol–gel-based processing method. The characterizations of the resulting synthetic...
The surface structure and electronic properties of Mg vacancy defects on talc (001) and impurity defects with Fe, Mn, Ni, Al, and Ca replacing Mg atoms were calculated by using density functional theory. The calculation results show that the order of...
Talcose molybdenite resources are abundant but resource utilization is low. The floatation separation of molybdenite (MoS2) and talc is challenging due to their similar natural hydrophobicity and layered structures. This study investigates the surfac...
Talc, as a phyllosilicate mineral, is often associated with sulfides such as copper, molybdenum, and nickel, which severely impact the flotation of target minerals. Micro-flotation experiments combined with SEM, contact angle, FTIR, TOC, and AFM anal...
The shrinkage of reinforced polymer composites in injection molding varies, depending on the properties of the reinforcing agent. Therefore, the study of optimal reinforcement conditions, to minimize shrinkage when talc and glass fibers (GF) (which a...
28 February 2019
The present investigation was designed to explore the risk of stomach cancer by oral intake of talc powder without asbestos. We conducted a population-based cohort study on a randomly sampled cohort from Taiwan’s health insurance database, with...
In recent decades, talc and kaolinite have been widely used as raw materials for the ceramic industry. In this study, the final characteristics of kaolinitic clay mixed with 6 mass% of magnesite obtained in our previous work were compared with those...
Moisture is one of the most important factors impacting the talc pellet process. In this study, a hybrid model (HM) based on the combination of intelligent algorithms, self-organizing map (SOM), the adaptive neuron fuzzy inference system (ANFIS) and...
Six pharmaceutical pastes were prepared using chemically modified kaolin and talc powders. Tests were conducted to determine their structural and chemical characteristics as well as their antimicrobial protection, thus rendering them suitable for cos...
Near-infrared spectroscopy (NIRS) has been widely used for quantitative and/or qualitative determination of a wide range of matrices. The objective of this study was to develop a NIRS method for the quantitative determination of fluorine content in p...
The archaeometric study of the “golden slip” ware (second century BCE—fourth century CE) at the site of Barikot (Swat, north-western Pakistan) aimed to define its manufacturing technology and provenance of the raw materials used. Fo...
In this study, the flotation behavior of malachite was investigated using hydrophobic talc nanoparticles (TNs) as collectors. To improve the floatability of TN-deposited malachite, various experimental parameters were systematically investigated. We...
The Kletno deposit in the Śnieżnik Massif (Central Sudetes, SW Poland), mined for Fe, U, Ag, Cu, fluorite, and marble through the ages, developed at the contact of marbles and orthogneiss. Here, we present a new Fe-Ti-V-ore (containing up to 14.07 wt...
The deficiency of available silicon (Si) incurred by year-round agricultural and horticultural practices highlights the significance of Si fertilization for soil replenishment. This study focuses on a novel and economical route for the synthesis of S...
The aim of the study was to determine the effect of the application of processing screws with a modified test segment in a corotating twin-screw extruder on selected properties of talc-filled polypropylene extrudate. The test segment was built of tri...
Introduction: Chemical pleurodesis is an accepted palliative therapy for patients with recurrent and symptomatic pleural effusion. The aim of the study is to present our own experiences with a less invasive variant of this procedure performed with ta...
The increasing production of plastics, driven by modern societal development, has resulted in a significant rise in plastic waste, which poses serious environmental concerns due to its lengthy degradation times. The growing issue of single-use plasti...
A large portion of the produced Polypropylene (PP) is used in the form of fibers. In this industrially oriented study, the development of composite PP drawn fibers was investigated. Two types of fillers were used (ultra-fine talc and single-wall carb...
Fe3O4/talc nanocomposite was used for removal of Cu(II), Ni(II), and Pb(II) ions from aqueous solutions. Experiments were designed by response surface methodology (RSM) and a quadratic model was used to predict the variables. The adsorption parameter...
Unfilled and talc-filled Copolymer Polypropylene (PP) samples were produced through low-pressure foam-injection molding (FIM). The foaming stage of the process has been facilitated through a chemical blowing agent (C6H7NaO7 and CaCO3 mixture), a phys...
of 6