Skip to Content

489 Results Found

  • Article
  • Open Access
4 Citations
7,496 Views
11 Pages

2 February 2025

The purpose of this research was to investigate the modulus of rupture (MOR) and modulus of elasticity (MOE) in the static bending of yellow pine (Pinus ponderosa Douglas ex C. Lawson) earlywood and latewood. The relationship between the properties o...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
21 Citations
5,984 Views
11 Pages

18 June 2018

This article presents a non-destructive methodology to determine the modulus of elasticity (MOE) in static bending of wood through the use of near-infrared (NIR) spectroscopy. Wood specimens were obtained from Quercus mongolica growing in Northeast o...

(This article belongs to the Special Issue Spectroscopy Based Sensors)
  • Article
  • Open Access
12 Citations
2,586 Views
12 Pages

27 April 2021

Based on the “axial-output method”, the time histories of radial and axial expansive pressures during the hydration process of static cracking agent (SCA) in a cylinder with various diameters were obtained by experiments. With the load input taken as...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
8 Citations
2,139 Views
16 Pages

10 June 2023

The dynamic modulus of elasticity (Ed), specified by ultrasonic pulse velocity measurements, is often used, especially for concrete built into construction, to estimate the static modulus of elasticity (Ec,s). However, the most commonly used Equation...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
2,006 Views
14 Pages

27 July 2024

In the case of concrete built into a structure, the static secant modulus of elasticity (Ec,s) is often estimated based on its dynamic value (Ed) measured by the ultrasonic pulse velocity method instead of direct tests carried out on drilled cores. M...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
32 Citations
5,692 Views
22 Pages

Determination of Polypropylene Fiber-Reinforced Concrete Compressive Strength and Elasticity Modulus via Ultrasonic Pulse Tests

  • Alexandre Almeida Del Savio,
  • Darwin La Torre Esquivel,
  • Julian Carrillo and
  • Emilio Chi Yep

14 October 2022

Compressive strength and elasticity modulus are the main mechanical properties of concrete. The non-destructive ultrasound pulse test can be used to determine these properties without compromising the structure’s integrity. This study seeks to...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
4 Citations
4,581 Views
22 Pages

7 August 2020

For accurate design, construction, and maintenance, it is important to identify the elastic modulus of concrete. This is usually achieved using a destructive test based on American Society for Testing and Materials (ASTM) C469. However, obtaining an...

(This article belongs to the Special Issue Artificial Intelligence Technologies for Structural Health Monitoring)
  • Article
  • Open Access
505 Views
18 Pages

31 May 2026

Testing harvested logs is a critical step in the wood products supply chain. Non-destructive evaluation (NDE) methods are essential for grading and sorting logs, especially given variations associated with tree age. In this study, plantation-grown Eu...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
2,014 Views
12 Pages

6 June 2025

Stiffness parameters are very important and effective in the constitutive models used in finite element analysis. It is not easy or common to obtain these parameters in the laboratory. However, even if the modulus is determined in the small and mediu...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
5 Citations
6,420 Views
13 Pages

Modulus of Elasticity in Plywood Boards: Comparison between a Destructive and a Nondestructive Method

  • Ricardo de la Cruz-Carrera,
  • Artemio Carrillo-Parra,
  • José Ángel Prieto-Ruíz,
  • Francisco Javier Fuentes-Talavera and ,
  • Faustino Ruiz-Aquino and
  • José Rodolfo Goche-Télles
  • + 1 author+ 0 author

11 September 2024

Nondestructive methods are a fast and accurate way to obtain information about the mechanical properties of plywood panels. The objective was to determine the modulus of rupture and compare the modulus of elasticity (MOE) in plywood boards made with...

(This article belongs to the Special Issue Recent Advances in Wood Identification, Evaluation and Modification)
  • Article
  • Open Access
13 Citations
6,677 Views
16 Pages

The Young’s Modulus and Poisson’s Ratio of Hard Coals in Laboratory Tests

  • Mirosława Bukowska,
  • Piotr Kasza,
  • Rafał Moska and
  • Janusz Jureczka

28 March 2022

The Young’s modulus and Poisson’s ratio, parameters reflecting the elastic response of a rock to stress, are the key parameters used in many engineering activities, such as hard coal mining and natural gas extraction. The objective of thi...

(This article belongs to the Special Issue Integrated Approaches for Unconventional Oil and Gas Extraction and Exploration)
  • Article
  • Open Access
2,055 Views
15 Pages

26 June 2022

The collapse deformation of shale has a significant influence on the exploitation process. Experimental analysis has indicated a correlation coefficient range from 0.9814 to 0.9981 and the established sample regression formula could be used to expres...

(This article belongs to the Special Issue Exploitation of Geological Resources in Unconventional Reservoirs)
  • Article
  • Open Access
16 Citations
2,865 Views
19 Pages

26 April 2021

The application of recycled coarse aggregate (RCA) made from waste concrete to replace natural coarse aggregate (NCA) in concrete structures can essentially reduce the excessive consumption of natural resources and environmental pollution. Similar to...

  • Review
  • Open Access
23 Citations
9,342 Views
22 Pages

24 May 2024

The rock’s mechanical properties play an important role in the whole process of conventional and unconventional oil and gas exploration and progression. At present, there are two approaches to determining the mechanical parameters. One is to me...

  • Article
  • Open Access
1 Citations
956 Views
15 Pages

Technological Properties of Some Non-Native Hardwood in Mediterranean Area

  • Antonio Zumbo,
  • Angela Lo Monaco,
  • Salvatore F. Papandrea,
  • Rodolfo Picchio and
  • Andrea R. Proto

1 April 2026

A growing global demand for wood, coupled with the role of this material in low-carbon strategies, is fuelling interest in fast-growing plantations, including short-rotation forestry (SRF) and agroforestry systems. However, evidence of the physical&n...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
42 Citations
4,187 Views
24 Pages

27 June 2020

The static elastic modulus (Ec) and compressive strength (fc) are critical properties of concrete. When determining Ec and fc, concrete cores are collected and subjected to destructive tests. However, destructive tests require certain test permission...

(This article belongs to the Special Issue Testing of Materials and Elements in Civil Engineering)
  • Article
  • Open Access
140 Citations
15,636 Views
16 Pages

1 August 2018

Concrete is a very popular material in the construction industry—it is, however, susceptible to quasi-brittle failure and restricted energy absorption after yielding. The incorporation of short discrete fibers has shown great promise in address...

  • Article
  • Open Access
36 Citations
4,753 Views
15 Pages

11 November 2021

In order to solve the problem of lack of natural river sand, crushed waste oyster shells (WOS) were used to replace river sand. By replacing 20% river sand, WOS mortar with different particle sizes of WOS were made for the experiment. Through experim...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
2 Citations
2,158 Views
17 Pages

4 May 2023

Two sizes of test samples were selected to investigate the effect of size on the level of degradation. The smaller test specimens had dimensions of 40 × 40 × 160 mm, and the larger ones had dimensions of 100 × 100 × 400 mm. Bo...

(This article belongs to the Special Issue Research on Non-destructive Testing in Civil Engineering Materials)
  • Article
  • Open Access
1 Citations
2,033 Views
20 Pages

27 April 2025

The elastic modulus is one of the fundamental parameters controlling the mechanical behaviour of concrete. In this study, the Movable Cellular Automata (MCA) method is applied to predict the Young’s modulus of concrete based on the properties o...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
8 Citations
3,254 Views
18 Pages

Influence of Coarse Grain Content on the Mechanical Properties of Red Sandstone Soil

  • Junhua Chen,
  • Yanjiang Zhang,
  • Yanxin Yang,
  • Bai Yang and ,
  • Bocheng Huang and
  • Xinping Ji
  • + 1 author+ 0 author

8 February 2023

Coarse-grained red sandstone soil is often used as embankment filling material but is prone to being broken by extrusion, which lowers the stability of the roadbed. This paper aimed to clarify the influence of the variation in coarse-grain content on...

(This article belongs to the Special Issue Geotechnical Stability Analysis for Sustainable Development of Infrastructure)
  • Article
  • Open Access
1 Citations
2,747 Views
19 Pages

29 February 2024

Modern road construction uses a large number of polymer-based materials. Material composition depends on their roles. Among the most important functions of road body materials is to transfer all loads safely to the subgrade. A thorough understanding...

(This article belongs to the Special Issue Preparation, Structure and Characterization of Polymer/Cement Composites II)
  • Article
  • Open Access
507 Views
22 Pages

19 May 2026

Ultra-high molecular weight polyethylene (UHMWPE) fibers have recently emerged as a promising reinforcement material in fiber-reinforced concrete (FRC). To investigate the synergistic effects and reinforcing mechanisms of fibers with different elasti...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
1,649 Views
12 Pages

26 August 2025

This study investigates the effect of polypropylene fibers of different lengths (54 mm, 38 mm, 19 mm) on the mechanical and fracture properties of high-strength concrete. Unlike most existing research focusing on a single fiber length, this work eval...

(This article belongs to the Special Issue Advanced Studies in Structural Performance, Durability, and Constractional Improvements of Reinforced Concrete Structures)
  • Article
  • Open Access
53 Citations
7,645 Views
12 Pages

22 March 2018

In this paper, the relationship between the static and dynamic elastic modulus of concrete and the relationship between the static elastic modulus and compressive strength of concrete have been formulated. These relationships are based on investigati...

  • Article
  • Open Access
9 Citations
3,310 Views
15 Pages

12 November 2021

This study investigated the effects of freezing temperature under freeze-thaw cycling conditions on the mechanical behavior of sandstone. First, the sandstone specimens were subjected to 10-time freeze-thaw cycling treatments at different freezing te...

(This article belongs to the Special Issue Mechanical Properties and Fracture Behavior of Rocks)
  • Article
  • Open Access
1 Citations
815 Views
14 Pages

24 November 2025

This study examines the mechanical performance of small-sized glued-laminated timber (GLT) produced from low-quality oak (Quercus spp.) lamellae and veneer arranged in 2–5 layers. After both non-destructive and bending tests, density, modulus o...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
1,970 Views
13 Pages

Assessment of Mechanical Properties of Concrete by Combining Digital Image Correlation and Ultrasonic Pulse Velocity

  • Juan B. Pascual-Francisco,
  • Cristian A. Cabrera-Higuera,
  • Alexander López-González,
  • Orlando Susarrey-Huerta and ,
  • Adán Jiménez-Montoya and
  • Eber A. Godínez-Domínguez
  • + 1 author+ 0 author

28 January 2026

The ultrasonic pulse velocity (UPV) method is widely used for determining the dynamic modulus of elasticity of concrete. Traditionally, this approach requires assuming Poisson’s ratio (arbitrary values ranging from 0.1 to 0.25), regardless of t...

(This article belongs to the Special Issue Mechanical Properties and Durability of Concrete Materials and Structures)
  • Article
  • Open Access
4 Citations
4,018 Views
13 Pages

Influence of Concrete Strength Class on the Long-Term Static and Dynamic Elastic Moduli of Concrete

  • Sergiu-Mihai Alexa-Stratulat,
  • Petru Mihai,
  • Ana-Maria Toma,
  • George Taranu and
  • Ionut-Ovidiu Toma

9 December 2021

Construction materials, among which concrete is by far the most used, have followed a trend of continuously increasing demand in real estate. A relatively small number of research works have been published on the long-term material properties of conc...

(This article belongs to the Special Issue Reinforced Concrete: Materials, Physical Properties and Applications)
  • Article
  • Open Access
2 Citations
2,943 Views
14 Pages

Multilayer Granular Recycled Rubber for Its Application to Technical Flooring

  • Victoria Sanz Buades,
  • Ernesto Juliá Sanchis,
  • Jorge Segura Alcaraz,
  • Isaac Montava Belda and
  • José María Gadea Borrell

7 December 2022

The aim of this study is to investigate the static and dynamic behaviour of multilayer materials manufactured from granular recycled rubber applied to technical flooring. The studied samples were manufactured by varying their thickness, density and g...

(This article belongs to the Section Environmental Sustainability and Applications)
  • Article
  • Open Access
8 Citations
3,035 Views
19 Pages

Enhanced Reverse-Engineering Method for Accurately Predicting Lamina Properties in Laminated Composites via Combined Static and Dynamic Finite Element Simulations

  • Mun-Young Hwang,
  • Jeong Hun Park,
  • Jongho Song,
  • Soo Woong Hwang and ,
  • Hun Hee Kang and
  • Hyun Chul Lee
  • + 1 author+ 0 author

15 December 2023

This study aims to ascertain the material characteristics that are intrinsic to the prepreg layer within a laminated composite structure. The elastic modulus of the lamina, a primary determinant of composite structural behavior, is the focal point of...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
20 Citations
3,913 Views
18 Pages

27 June 2022

Using polypropylene fiber (PPF) and nano clay modified lime treated soil (LS), the static and dynamic properties of fiber modified lime treated soil (FLS), nano clay modified lime treated soil (NLS), and fiber nano clay composite modified lime treate...

(This article belongs to the Special Issue Polymeric Composites in Road and Bridge Engineering: Characterization, Production and Application)
  • Article
  • Open Access
15 Citations
3,657 Views
19 Pages

23 August 2019

The main objectives of this study are (1) to investigate the effects of heating and cooling on the static and dynamic residual properties of 35 MPa (5000 psi) concrete used in the design and construction of nuclear reactor auxiliary buildings in Kore...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
568 Views
22 Pages

Mass-Loaded Metamaterials Based on Polymer Matrix with Static–Dynamic Decoupling for Pressure-Resistant Broadband Underwater Sound Absorption

  • Lin Liu,
  • Yang Wang,
  • Shengsen Xu,
  • Haibin Yang and ,
  • Jie Zhong,
  • Caiqiong Liang and
  • Jihong Wen
  • + 2 authors+ 0 author

30 August 2026

Elastic metamaterials have been widely applied in elastic wave manipulation. Nevertheless, their performance is inherently restricted by two intrinsic coupling mechanisms: the modulus and density follow a power-law scaling relationship under static c...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
17 Citations
4,527 Views
11 Pages

22 April 2020

Wedge-shaped boards of spruce wood (Picea abies Karst.) are used to make violin fronts, also known as soundboards. Oil-heat treatment (OHT) can influence the acoustic properties of resonant wood, such as spruce. In this study, the effect of OHT on sp...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
26 Citations
5,957 Views
17 Pages

Physical and Mechanical Properties of Ammonia-Treated Black Locust Wood

  • Mariana Domnica Stanciu,
  • Daniela Sova,
  • Adriana Savin,
  • Nicolae Ilias and
  • Galina A. Gorbacheva

7 February 2020

Because of the uneven colour of black locust wood, different technologies are used to change the colour, the bestknown being chemical and thermal treatments. Some of them affect the mechanical properties of wood, such as elasticity modulus, strength,...

(This article belongs to the Special Issue Advances in Wood Composites II)
  • Article
  • Open Access
3 Citations
2,582 Views
11 Pages

The Effect of Periodic Loading of Glued Laminated Beams on Their Static Bending Strength

  • Dorota Dziurka,
  • Adam Derkowski,
  • Dorota Dukarska,
  • Jakub Kawalerczyk and
  • Radosław Mirski

31 May 2022

Engineered wood products (EWP) such as glulam beams are gaining more and more popularity due to several advantages resulting from the wood itself, as well as the constant search for structural materials of natural origin. However, building materials...

(This article belongs to the Special Issue Innovative Approaches for Cellulose-Containing Materials)
  • Article
  • Open Access
5 Citations
2,260 Views
11 Pages

30 July 2021

The article concerns the quality issues in wood industry, and especially the advisability of removing defects from veneers. The research purpose of the study was to analyse the influence of the layered structure of plywood base layer made of low-qual...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
32 Citations
3,370 Views
12 Pages

26 May 2023

(1) The assessment of the mechanical properties of old timber is essential for the proper maintenance of wooden structures. (2) Among the non-destructive properties, the dynamic modulus of elasticity is one of the best predictors of the mechanical ch...

(This article belongs to the Special Issue Wood as Cultural Heritage Material)
  • Article
  • Open Access
8 Citations
3,455 Views
13 Pages

A Study on Initial Setting and Modulus of Elasticity of AAM Mortar Mixed with CSA Expansive Additive Using Ultrasonic Pulse Velocity

  • Gum-Sung Ryu,
  • Sung Choi,
  • Kyung-Taek Koh,
  • Gi-Hong Ahn and ,
  • Hyeong-Yeol Kim and
  • Young-Jun You
  • + 1 author+ 0 author

5 October 2020

This study investigated the hardening process of alkali-activated material (AAM) mortar using calcium sulfoalumiante (CSA) expansive additive (CSA EA), which accelerates the initial reactivity of AAMs, and subsequent changes in ultrasonic pulse veloc...

(This article belongs to the Special Issue High Performance Concrete)
  • Article
  • Open Access
7 Citations
3,793 Views
11 Pages

Determination of the Static Bending Properties of Green Beech and Oak Wood by the Frequency Resonance Technique

  • Patrik Nop,
  • Valentino Cristini,
  • Jan Zlámal,
  • Mojtaba Hassan Vand and ,
  • Vít Šeda and
  • Jan Tippner
  • + 1 author+ 0 author

11 January 2024

This article discusses the non-destructive evaluation of the mechanical properties of green wood. To estimate the dynamic flexural modulus of elasticity (MOED), a non-destructive test (NDT) method—the frequency resonance technique (FRT)—w...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
1,817 Views
19 Pages

Creep and Hardening Characteristics of Anthracite under Graded Static–Dynamic Coupled Loading

  • Shaofei Yue,
  • Kai Wang,
  • Xiaoqiang Zhang,
  • Tianhe Kang and ,
  • Jianbing Yan and
  • Yulong Jiang
  • + 1 author+ 0 author

25 September 2023

Remaining coal pillars in remining areas exhibit clear creep characteristics, and dynamic pressure accelerates their instability and failure. The creep and hardening characteristics of coal under dynamic pressure are of great engineering significance...

(This article belongs to the Topic Complex Rock Mechanics Problems and Solutions)
  • Review
  • Open Access
19 Citations
17,581 Views
31 Pages

2 November 2023

The aim of this review was to provide an overview of the recent findings on the acute and chronic effects of static stretching on joint behaviors and neuromuscular responses and to discuss the overall effects of acute and chronic static stretching on...

(This article belongs to the Special Issue Sports and Exercise Rehabilitation)
  • Article
  • Open Access
16 Citations
3,923 Views
11 Pages

4 October 2021

It is difficult to measure elastic modulus simply and accurately in the testing of mechanical properties of materials. Combined with static tensile method, this paper presents a method for measuring elastic modulus of materials based on air-coupled u...

(This article belongs to the Section Applied Physics General)
  • Article
  • Open Access
180 Views
19 Pages

1 November 2026

The area compressibility modulus is a key descriptor of lipid membrane mechanics, but the molecular interactions that determine this elasticity are not evident from the total modulus alone. Here, molecular dynamics simulations of a POPC bilayer descr...

(This article belongs to the Special Issue Feature Papers in Section “Molecular Biophysics: Structure, Dynamics, and Function”)
  • Article
  • Open Access
29 Citations
5,172 Views
10 Pages

The Technical Quality of the Wood of Scots Pine (Pinus sylvestris L.) of Diverse Genetic Origin

  • Eliza Konofalska,
  • Paweł Kozakiewicz,
  • Włodzimierz Buraczyk,
  • Henryk Szeligowski and
  • Hubert Lachowicz

14 May 2021

This work contains the preliminary results of research into the technical quality of the wood from Scots pine trees of diverse genetic origin, grown on an experimental plot at the Forest Experimental Station in Rogów. The following are the parent sta...

(This article belongs to the Special Issue Forest Sustainability: Wood Harvest, Supply and Procurement Chain, and Wood Raw Material Properties)
  • Article
  • Open Access
4 Citations
3,529 Views
12 Pages

Evaluation of Mechanical Wood Properties of Silver Birch (Betula pendula L. Roth.) of Half-Sib Genetic Families

  • Benas Šilinskas,
  • Iveta Varnagirytė-Kabašinskienė,
  • Lina Beniušienė,
  • Marius Aleinikovas and ,
  • Mindaugas Škėma and
  • Virgilijus Baliuckas
  • + 1 author+ 0 author

11 May 2024

Silver birch, a widely distributed deciduous tree native to Europe, is valued for its wood applications in construction, furniture making, and paper production. In Lithuania, silver birch ranks as the third most common forest-tree species, comprising...

(This article belongs to the Section Wood Science and Forest Products)
  • Proceeding Paper
  • Open Access
3,011 Views
7 Pages

Mechanical Characterization of Compact Basalt by Using SHPB Device

  • Sunita Mishra,
  • Tanusree Chakraborty and
  • Vasant Matsagar

In the present work, dynamic stress-strain response of compact basalt is tested under high loading rates using 38 mm split Hopkinson pressure bar (SHPB) device. The physical and static mechanical properties of compact basalt, e.g., density, specific...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
19 Citations
3,534 Views
13 Pages

Novel 2D Dynamic Elasticity Maps for Inspection of Anisotropic Properties in Fused Deposition Modeling Objects

  • Yuqi Jin,
  • Teng Yang,
  • Hyeonu Heo,
  • Arkadii Krokhin and ,
  • Sheldon Q. Shi,
  • Narendra Dahotre,
  • Tae-Youl Choi and
  • Arup Neogi
  • + 3 authors+ 0 author

30 August 2020

In this study, a novel ultrasonic non-destructive and non-invasive elastography method was introduced and demonstrated to evaluate the mechanical properties of fused deposition modeling 3D printed objects using two-dimensional dynamical elasticity ma...

(This article belongs to the Special Issue FDM-Printed Materials)
  • Article
  • Open Access
7 Citations
6,602 Views
13 Pages

Modulus of Elasticity and Bending Strength of Scots Pine (Pinus sylvestris L.) Wood from Commercial Thinnings

  • Reeta Stöd,
  • Juhani Marttila,
  • Laura Tomppo,
  • Antti Haapala and
  • Erkki Verkasalo

20 March 2024

The static bending properties of Scots pine (Pinus sylvestris L.) clear wood were studied using a material collected from commercial thinning forests in eastern Finland. In Myrtillus type, the modulus of elasticity and bending strength of the first t...

(This article belongs to the Section Wood Science and Forest Products)

of 10