Skip to Content

117 Results Found

  • Feature Paper
  • Article
  • Open Access
6 Citations
3,119 Views
15 Pages

Fire Behavior of Polyamide 12/Rubber Formulations Made by Laser Sintering

  • Marcos Batistella,
  • Monica Francesca Pucci,
  • Arnaud Regazzi,
  • José-Marie Lopez-Cuesta and ,
  • Ouassila Kadri,
  • David Bordeaux and
  • Florence Ayme
  • + 2 authors+ 0 author

26 February 2022

In the present work, the processability and fire behavior of parts made by the laser sintering (LS) of polyamide 12/rubber powder blends is studied. In order to evaluate some of the interactions that could take place during LS, three acrylonitrile bu...

(This article belongs to the Special Issue Microstructures and Properties of Polymer Blends Processed through 3D Printing)
  • Article
  • Open Access
29 Citations
5,821 Views
19 Pages

Selective Laser Sintering of Nano Al2O3 Infused Polyamide

  • Anthony Warnakula and
  • Sarat Singamneni

27 July 2017

Nano Al2O3 polyamide composites are evaluated for processing by selective laser sintering. A thermal characterization of the polymer composite powders allowed us to establish the possible initial settings. Initial experiments are conducted to identif...

  • Article
  • Open Access
9 Citations
4,176 Views
11 Pages

Flame-Retardant and Tensile Properties of Polyamide 12 Processed by Selective Laser Sintering

  • Tatjana Glaskova-Kuzmina,
  • Didzis Dejus,
  • Jānis Jātnieks,
  • Partel-Peeter Kruuv and ,
  • Linda Lancere,
  • Stepans Kobenko,
  • Anatolijs Sarakovskis and
  • Aleksejs Zolotarjovs
  • + 3 authors+ 0 author

Composite materials are becoming widely applied in fire-critical conditions such as, e.g., aviation interior parts. Environmental considerations motivate the use of additive manufacturing due to the decrease of polymer wastes, and therefore additiona...

(This article belongs to the Special Issue Additive Manufacturing of Composites and Nanocomposites)
  • Article
  • Open Access
14 Citations
3,152 Views
15 Pages

2 December 2023

Polyamide 11 (PA11) is a plant-based nylon made from castor beans. Powder bed fusion laser sintering (PBF-LS) is an additive manufacturing process used for PA11 which allows for the reuse of the unsintered powder. The unsintered powder is mixed with...

(This article belongs to the Special Issue Structure and Properties of Polymeric Materials in Additive Manufacturing II)
  • Article
  • Open Access
21 Citations
5,228 Views
21 Pages

29 July 2020

Up to now, laser-sintered components have been barely used by industries such as aerospace and transport industry due to high flammability. By the use of flame retardants, the flammability of laser-sintered parts should be reduced to extend their ran...

(This article belongs to the Special Issue 3D/4D Printing with Polymers, Polymer Hydrogels and Adaptive Soft Materials)
  • Article
  • Open Access
92 Citations
10,828 Views
14 Pages

9 February 2018

Selective laser sintering (SLS) of thermoplastic materials is an additive manufacturing process that overcomes the boundary between prototype construction and functional components. This technique also meets the requirements of traditional and establ...

  • Article
  • Open Access
4 Citations
2,115 Views
20 Pages

High Speed Sintering of Polyamide 12: From Powder to Part Properties

  • Jan Kemnitzer,
  • Marco Wimmer,
  • Anna Tarasova and
  • Frank Döpper

23 December 2024

High Speed Sintering (HSS) is an additive manufacturing process with great potential to produce complex, high-quality polymer parts on an industrial scale. However, little information is currently available on the characteristics of the powder materi...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
2 Citations
2,778 Views
18 Pages

17 February 2021

The laser sintering of polymers is an additive manufacturing technology that is becoming increasingly established in the industrial environment. This study investigated the thickness-dependent permeation properties of laser-sintered (LS) polymers as...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
17 Citations
3,794 Views
12 Pages

30 June 2022

In this work, polyamide 12 (PA12) and carbon fiber reinforced polyamide 12 (CF/PA12) composites were fabricated using selective laser sintering (SLS), and the coupling effects of the strain rate and hygroscopicity on the compressive mechanical proper...

(This article belongs to the Special Issue Laser Additive Manufacturing: Design, Materials, Processes and Applications)
  • Feature Paper
  • Article
  • Open Access
71 Citations
11,734 Views
15 Pages

30 April 2017

Different features of polymer powders influence the process of laser sintering (LS) and the properties of LS-parts to a great extent. This study investigates important aspects of the “powder/process/part”-property relationships by comparing two polya...

(This article belongs to the Special Issue Materials for 3D Printing)
  • Article
  • Open Access
9 Citations
1,768 Views
21 Pages

23 January 2024

Additive manufacturing procedures are being increasingly developed, from prototyping to finished functional products. However, their rapid development also brings along the testing of properties with different manufacturing parameters. In selective l...

(This article belongs to the Section Additive Manufacturing Technologies)
  • Article
  • Open Access
30 Citations
5,718 Views
12 Pages

Analysis of Tribo-Charging during Powder Spreading in Selective Laser Sintering: Assessment of Polyamide 12 Powder Ageing Effects on Charging Behavior

  • Nicolas Hesse,
  • Maximilian A. Dechet,
  • Juan S. Gómez Bonilla,
  • Christian Lübbert and ,
  • Stephan Roth,
  • Andreas Bück,
  • Jochen Schmidt and
  • Wolfgang Peukert
  • + 3 authors+ 0 author

3 April 2019

Powder flowability is key to achieving high process stability and part quality by application of smooth and dense layers in selective laser sintering (SLS). This study sheds light on the rarely investigated effect of tribo-electric charge build-up du...

(This article belongs to the Collection Assessment of the Ageing and Durability of Polymers)
  • Article
  • Open Access
15 Citations
3,147 Views
19 Pages

10 June 2022

The price of material is an important factor when selecting the additive polymer procedure. In selective laser sintering (SLS), the price can be reduced by the recycling of material, i.e., with different shares of original and recycled material, as w...

(This article belongs to the Special Issue Mechanical Performance of Polymeric Parts Obtained by Additive Manufacturing)
  • Article
  • Open Access
48 Citations
5,856 Views
12 Pages

11 March 2020

Selective Laser Sintering is a flexible additive manufacturing technology that can be used for the fabrication of high-resolution parts. Alongside the shape and dimension of the parts, the mechanical properties are essential for the majority of appli...

(This article belongs to the Special Issue Process–Structure–Properties in Polymer Additive Manufacturing)
  • Article
  • Open Access
12 Citations
3,854 Views
16 Pages

Thermal Modeling of Polyamide 12 Powder in the Selective Laser Sintering Process Using the Discrete Element Method

  • Reda Lakraimi,
  • Hamid Abouchadi,
  • Mourad Taha Janan,
  • Abdellah Chehri and
  • Rachid Saadane

12 January 2023

Selective laser sintering (SLS) is one of the key additive manufacturing technologies that can build any complex three-dimensional structure without the use of any special tools. Thermal modeling of this process is required to anticipate the quality...

(This article belongs to the Special Issue Materials for Additive Manufacturing)
  • Article
  • Open Access
5 Citations
2,669 Views
15 Pages

Characterization and Simulation of Shear-Induced Damage in Selective-Laser-Sintered Polyamide 12

  • Daniela Schob,
  • Lukas Richter,
  • Krzysztof Kotecki,
  • Dariusz Kurpisz and ,
  • Robert Roszak,
  • Philipp Maasch and
  • Matthias Ziegenhorn
  • + 2 authors+ 0 author

21 December 2023

This paper presents the characterisation of selective-laser-sintered (SLS) samples of polyamide 12 (PA12) under shear loading. PA12 is a semi-crystalline thermoplastic and is used in various industries. Its behaviour under shear stress, which is part...

(This article belongs to the Special Issue Computational Modeling and Simulation of Polymers and Biopolymers)
  • Article
  • Open Access
18 Citations
3,213 Views
21 Pages

7 August 2024

The use of additive manufacturing to rapidly test and evaluate solutions to engineering problems has been demonstrated. Selective laser sintering (SLS) is a subset of additive manufacturing that is particularly well suited to producing structural thi...

(This article belongs to the Special Issue Progress in 3D Printing II)
  • Article
  • Open Access
17 Citations
3,117 Views
16 Pages

28 September 2023

Carbon fiber-reinforced polymers (CFRPs) are being used extensively in modern industries that require a high strength-to-weight ratio, such as aerospace, automotive, motorsport, and sports equipment. However, although reinforcement with carbon fibers...

(This article belongs to the Special Issue Organic-Inorganic Hybrid Materials III)
  • Article
  • Open Access
5 Citations
4,413 Views
22 Pages

6 February 2023

Selective laser sintering (SLS) with polymers is currently in transition to the production of functional components. Nevertheless, the potential to revolutionize conventional production processes is confronted by newly imposed requirements regarding...

(This article belongs to the Special Issue Feature Papers in Powders)
  • Article
  • Open Access
366 Views
40 Pages

6 July 2026

The results of the experimental research on the assessment of the gas permeability of porous materials in relation to gas flow are presented. The tests involved materials with an isotropic gap-porous structure—for comparison, a model material s...

  • Article
  • Open Access
119 Citations
13,769 Views
17 Pages

19 October 2016

Multi-walled carbon nanotubes (CNTs) as nano-reinforcements were introduced to facilitate the laser sintering process and enhance the thermal and mechanical properties of polymeric composites. A dual experimental-theoretical method was proposed to ev...

(This article belongs to the Special Issue Three-Dimensional Structures: Fabrication and Application)
  • Article
  • Open Access
68 Citations
15,094 Views
9 Pages

Manufacturing the Gas Diffusion Layer for PEM Fuel Cell Using a Novel 3D Printing Technique and Critical Assessment of the Challenges Encountered

  • Arunkumar Jayakumar,
  • Sarat Singamneni,
  • Maximiano Ramos,
  • Ahmed M Al-Jumaily and
  • Sethu Sundar Pethaiah

14 July 2017

The conventional gas diffusion layer (GDL) of polymer electrolyte membrane (PEM) fuel cells incorporates a carbon-based substrate, which suffers from electrochemical oxidation as well as mechanical degradation, resulting in reduced durability and per...

(This article belongs to the Special Issue Advanced Materials in Polymer Electrolyte Fuel Cells)
  • Article
  • Open Access
3 Citations
3,030 Views
24 Pages

8 July 2021

With regard to the problem of gas flow through isotropic porous deposits, the issues were considered in the category of description of gas movement mechanisms for structural models of the skeleton. As part of experimental tests of gas permeability th...

(This article belongs to the Special Issue Advanced Construction Materials and Processes in Poland)
  • Article
  • Open Access
8 Citations
2,477 Views
17 Pages

Chess-like Pieces Realized by Selective Laser Sintering of PA12 Powder: 3D Printing and Micro-Tomographic Assessment

  • Giovanna Colucci,
  • Luca Fontana,
  • Jacopo Barberi,
  • Chiara Vitale Brovarone and
  • Massimo Messori

18 December 2024

The paper highlights the realization of 3D-printed parts with complex geometries, such as chess-like pieces, using polyamide 12 (PA12) as polymeric powder via selective laser sintering (SLS). The research activity focuses on the study of the powder p...

(This article belongs to the Special Issue Polymeric Materials and Their Application in 3D Printing, 2nd Edition)
  • Article
  • Open Access
1 Citations
1,135 Views
15 Pages

Valorization of Waste Powder from Selective Laser Sintering: An Opportunity for the Circular Economy

  • Inês Praça,
  • Cátia Guarda,
  • João Caseiro,
  • Ana Pires and
  • Victor Neto

The widespread adoption of additive manufacturing, particularly selective laser sintering (SLS), has raised concerns about the disposal of unused thermoplastic powder residues, such as polyamide 12 (PA12). The high cost of PA12 and its degradation du...

(This article belongs to the Topic Polymer Physics)
  • Article
  • Open Access
3 Citations
3,782 Views
10 Pages

Energetics of a Novel 3D-Printed Custom Ankle Foot Orthosis in a Population of Individuals with Foot Drop: A Pilot Study

  • Paolo Caravaggi,
  • Giulia Rogati,
  • Massimiliano Baleani,
  • Roberta Fognani and ,
  • Luca Zamagni,
  • Maurizio Ortolani,
  • Alessandro Zomparelli,
  • Franco Cevolini,
  • Zimi Sawacha and
  • Alberto Leardini
  • + 5 authors+ 0 author

23 May 2025

Passive Dynamic Ankle–Foot Orthoses (PD-AFOs) are medical devices prescribed to individuals with foot drop, a condition characterized by weakness of the ankle dorsiflexor muscles. PD-AFOs can store and release energy during the stance phase of...

(This article belongs to the Section Biomedical Engineering)
  • Article
  • Open Access
21 Citations
3,967 Views
15 Pages

26 February 2021

In this work, the fracture mechanics properties of polyamide (PA) specimens manufactured by the selective laser sintering (SLS) technology are investigated, in which an embedded crack-like notch was inserted in the design and produced during the addi...

(This article belongs to the Special Issue Research and Modeling of Materials Fatigue and Fracture)
  • Article
  • Open Access
14 Citations
3,022 Views
14 Pages

27 July 2023

Reinforcing thermoplastic materials for additive manufacturing with either short, long, and continuous fibers or micro/nanoparticles is a sound means to enhance the mechanical/tribological properties of functional 3D printed objects. However, despite...

(This article belongs to the Special Issue Carbon-Integrated Polymer Composites and Foams II)
  • Article
  • Open Access
12 Citations
1,530 Views
19 Pages

24 November 2025

Selective Laser Sintering (SLS) is an Additive Manufacturing (AM) technology that is receiving considerable attention in the scientific and industrial communities due to its great ability to efficiently produce functional and complex parts. The prese...

(This article belongs to the Special Issue Polymer Materials for Application in Additive Manufacturing, 2nd Edition)
  • Article
  • Open Access
1 Citations
2,684 Views
18 Pages

Additively manufactured fibre-reinforced polymers are gaining traction. After the development and optimisation of a novel fibre-deposition system in a laser sintering (LS) setup, polyamide 12 specimens were produced with and without glass fibres. In...

(This article belongs to the Special Issue Design, Processes and Materials for Additive Manufacturing)
  • Article
  • Open Access
28 Citations
4,363 Views
21 Pages

17 March 2023

Additive manufacturing (AM) is a rapidly growing branch of manufacturing techniques used, among others, in the medical industry. New machines and materials and additional processing methods are improved or developed. Due to the dynamic development of...

(This article belongs to the Special Issue Biocompatible Materials Investigated with Optical Methods)
  • Article
  • Open Access
2 Citations
1,864 Views
19 Pages

Laser Sintering of Nano-Graphite-Reinforced Polyamide Composites for Next-Generation Smart Materials: A Preliminary Investigation of Processability and Electromechanical Properties

  • Stefano Guarino,
  • Emanuele Mingione,
  • Gennaro Salvatore Ponticelli,
  • Alfio Scuderi and ,
  • Simone Venettacci and
  • Vittorio Villani
  • + 1 author+ 0 author

20 May 2025

Multifunctional reinforced polymer composites provide an ideal platform for next-generation smart materials applications, enhancing matrix properties like electrical and thermal conductivity. Reinforcements are usually based on functional metal alloy...

(This article belongs to the Special Issue Recent Advances in Additive Manufacturing Technology of Smart Materials)
  • Article
  • Open Access
49 Citations
6,475 Views
16 Pages

On the Reuse of SLS Polyamide 12 Powder

  • Pedro C. Gomes,
  • Oscar G. Piñeiro,
  • Alexandra C. Alves and
  • Olga S. Carneiro

10 August 2022

In the Selective Laser Sintering (SLS) technique, the great majority of the powder involved is not included in the final printed parts, being just used as a support material. However, the quality of this powder is negatively affected during the proce...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
810 Views
18 Pages

30 April 2026

A non-contact laser polishing method for additively manufactured polymer components with complex three-dimensional geometries is presented, employing a 6-axis robotic system. Robot-guided sample orientation, a quasi-top-hat scanning strategy, and clo...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
8 Citations
6,876 Views
18 Pages

5 June 2019

To provide knowledge to improve the mechanical performance of Polyamide 12 (PA12) sintered products, we have studied experimentally the mechanical response and structure development under constant strain rate of compression moulded and laser sintered...

(This article belongs to the Special Issue Additive Manufacturing of Polymeric Materials)
  • Article
  • Open Access
52 Citations
4,834 Views
15 Pages

9 November 2019

As additive manufacturing (AM) becomes more accessible, correlating process parameters with geometric and mechanical properties is an important topic. Because the number of process variables in AM is large, extensive studies must be conducted in orde...

(This article belongs to the Special Issue Laser Processing of Polymer Materials)
  • Article
  • Open Access
46 Citations
5,747 Views
16 Pages

15 March 2022

3D printing, also known as additive manufacturing, is becoming increasingly popular for prototype processing in industrial practice. Laser sintering, which is a laser powder bed fusion technique, is a versatile and common 3D printing technology, whic...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
21 Citations
4,482 Views
13 Pages

28 June 2023

The use of polymers in the transportation industry represents a great opportunity to meet the growing demand for lightweight structures and to reduce polluting emissions. In this context, additive manufacturing represents a very effective fabrication...

(This article belongs to the Special Issue Feature Paper in the Section 'Polymeric Materials')
  • Article
  • Open Access
1 Citations
1,219 Views
12 Pages

27 January 2026

Selective laser sintering (SLS) is an additive manufacturing method that enables the creation of complex-shaped polymer-based structures with great control over the desired properties. In this study, polyamide 12 (PA12)–based powders containing...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
24 Citations
5,218 Views
19 Pages

Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering

  • Riccardo Tonello,
  • Knut Conradsen,
  • David Bue Pedersen and
  • Jeppe Revall Frisvad

6 July 2023

Selective laser sintering (SLS) is a well-established technology that is used for additive manufacturing. Significant efforts have been made to improve SLS by optimizing the powder deposition, laser beam parameters, and temperature settings. The purp...

(This article belongs to the Special Issue Progress in 3D Printing II)
  • Article
  • Open Access
21 Citations
3,956 Views
15 Pages

2 March 2023

To enhance the properties of polyamide 12 (PA12/Nylon 12) manufactured by the selective laser sintering (SLS) process, micron-sized glass beads are used as a filler, and the resulting composite is known as glass bead-filled PA12 (PA 3200 GF). Despite...

(This article belongs to the Special Issue Preparation and Application of Functional Polymer Materials)
  • Article
  • Open Access
82 Citations
7,477 Views
14 Pages

Polyamide 12 Materials Study of Morpho-Structural Changes during Laser Sintering of 3D Printing

  • Gražyna Simha Martynková,
  • Aleš Slíva,
  • Gabriela Kratošová,
  • Karla Čech Barabaszová and ,
  • Soňa Študentová,
  • Jan Klusák,
  • Silvie Brožová,
  • Tomáš Dokoupil and
  • Sylva Holešová
  • + 4 authors+ 0 author

6 March 2021

The polyamide (PA)-12 material used for additive manufacturing was studied in aspects of morphology and their structural properties for basic stages received during 3D laser printing. Samples were real, big-scale production powders. The structure of...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
3 Citations
1,909 Views
18 Pages

25 July 2025

Discontinuous fibers are commonly added to matrix materials in additive manufacturing to enhance properties, but such benefits may be constrained by print and fiber orientation. The additive processes of forming rasters and layers in powder bed fusio...

(This article belongs to the Special Issue Polymeric Composites: Manufacturing, Processing and Applications)
  • Article
  • Open Access
14 Citations
3,275 Views
13 Pages

Mechanical Testing of Selective-Laser-Sintered Polyamide PA2200 Details: Analysis of Tensile Properties via Finite Element Method and Machine Learning Approaches

  • Ivan Malashin,
  • Dmitriy Martysyuk,
  • Vadim Tynchenko,
  • Vladimir Nelyub and ,
  • Aleksei Borodulin and
  • Andrey Galinovsky
  • + 1 author+ 0 author

8 March 2024

This study delves into the mechanical characteristics of polyamide PA2200 components crafted using selective laser sintering (SLS) technology. Our primary objective is to analyze the tensile behavior of the components printed at various orientations,...

(This article belongs to the Special Issue Polymeric Composites: Manufacturing, Processing and Applications)
  • Article
  • Open Access
4 Citations
2,275 Views
13 Pages

10 May 2024

In this paper, a comprehensive study of the mechanical properties of selective laser sintered polyamide components is presented, for various different process parameters as well as environmental testing conditions. For the optimization of the static...

(This article belongs to the Special Issue Mechanical and Physical Properties of 3D Printed Polymer Materials)
  • Feature Paper
  • Article
  • Open Access
4 Citations
1,941 Views
19 Pages

Towards the Reuse of Fire Retarded Polyamide 12 for Laser Sintering

  • Dylan Seigler,
  • Marcos Batistella and
  • José-Marie Lopez-Cuesta

15 August 2024

The control of powder aging during Selective Laser Sintering (SLS) processing is one of the challenges to be overcome for the implementation of this technique in serial production. Aging phenomena, because of the elevated temperatures and long proces...

(This article belongs to the Special Issue Nonconventional Technology in Materials Processing-3rd Edition)
  • Article
  • Open Access
35 Citations
5,737 Views
15 Pages

Mechanical and Tribological Properties of 3D Printed Polyamide 12 and SiC/PA12 Composite by Selective Laser Sintering

  • Guoyan Yu,
  • Jingdong Ma,
  • Jun Li,
  • Jingquan Wu and ,
  • Jiang Yu and
  • Xianzhang Wang
  • + 1 author+ 0 author

27 May 2022

Polymeric matrix composites are important to the advancement of industries such as the automobile and medicine industries. In this study, the silicon carbide (SiC) particle-reinforced polyamide12 (PA12) matrix composites were fabricated by selective...

(This article belongs to the Special Issue Surfaces and Interfaces of Polymer Composites)
  • Article
  • Open Access
22 Citations
7,339 Views
17 Pages

Evaluation of Uniformity and Glare Improvement with Low Energy Efficiency Losses in Street Lighting LED Luminaires Using Laser-Sintered Polyamide-Based Diffuse Covers

  • Alfonso Gago-Calderón,
  • Manuel Jesús Hermoso-Orzáez,
  • Jose Ramon De Andres-Diaz and
  • Guillermo Redrado-Salvatierra

2 April 2018

Energy saving in street lighting is garnering more interest and has become a priority in municipal management. Therefore, LED luminaires are gradually becoming prevalent in our cities. Beyond their energy/economic saving potential, quality in public...

(This article belongs to the Special Issue Urban Generation of Renewable Energy and Energy Saving in Cities)
  • Article
  • Open Access
9 Citations
3,234 Views
14 Pages

3 October 2022

Polymeric matrix composites have been widely used in the marine field. In this study, the tribological behavior under seawater-lubricated conditions of pure Polyamide 12 (PA12), micron-SiC and nanometer SiC and SiO2 particle-reinforced PA12 composite...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
15 Citations
3,927 Views
20 Pages

Non-isothermal laser-based powder bed fusion (LPBF) of polymers suggests the potential for significantly extending the range of materials applicable for powder-based additive manufacturing of polymers, relying on the absence of a material-specific pr...

(This article belongs to the Special Issue Progress in Powder-Based Additive Manufacturing)

of 3