74 Results Found

Rapid release and diminished stability are two of the limitations associated with the growth factors that are essentially used in dental applications. These growth factors are employed to enhance the quality and quantity of tissue or bone matter duri...

The orifice coagulation bath method is proposed to encapsulate shear thickening fluid (STF) to form STF capsules, in an attempt to improve the combination of STF and the matrix as well as strengthen the flexibility and stability of the STF composites...

Curcuma is a world-renowned herb known for its immense health benefits. In this study, physicochemical analyses were performed on the curcumin standard sample and curcumin multiple emulsions. The emulsions were analysed for thermal and structural sta...

Microfluidic devices are promising tools for the production of monodispersed tuneable complex emulsions. This review highlights the advantages of microfluidics for the fabrication of emulsions and presents an overview of the microfluidic emulsificati...

Emulsion gel, a novel oral delivery carrier, provides the possibility to co-load hydrophilic and lipophilic nutrients simultaneously. In this study, duo-induction methods of laccase and glucono-δ-lactone (L&GDL) or laccase and transglutamin...

This study aimed to optimize the preparation of multiple oil–water–oil (O/W/O) emulsions using varying amounts of Tween 20 emulsifier, different homogenization methods, and optimal preparation temperatures as carriers for encapsulated cur...

Background/Objectives: The oral administration of chemopreventive agents for colorectal cancer (CRC) remains limited by their low solubility, instability, and limited intestinal absorption. This study develops sodium carboxymethyl cellulose (CMC)-sta...

Production of food-grade emulsions is continuously rising globally, especially in developing countries. The steepest demand growth is in the segment of inexpensive meat products where edible emulsions serve as lubricants to mitigate economic loses li...

This review explores the intersection of microfluidic technology and complex emulsion development as a promising solution to the challenges of formulations in multi-drug therapy (MDT) and polypharmacy. The convergence of microfluidic technology and c...

Fine-denier silicone emulsions play an important role in the polyacrylonitrile (PAN) precursor treatment process by reducing surface tension and preventing fiber fusion during thermal stabilization and carbonization. These emulsions are typically pre...

Double emulsions show great potential for encapsulating active substances and protecting them against external influences. However, they tend to become unstable during storage. Research on double emulsions, therefore, focuses on maintaining their mic...

Most energy-saving testing methods for plunger pumps use hydraulic motors. The loading test of coal mine emulsion pumps generally uses an overflow valve as the loading unit, which is characterized by high energy consumption. The coal mine emulsion pu...

In order to evaluate the freeze-thaw stability of mung bean protein isolate (MPI)-stabilized emulsions and its relationship with protein structure, proteins of eight mung bean varieties were compared. The results revealed that MPIs prepared from all...

α-Tocopherol is the most effective lipid soluble natural antioxidant and free-radical scavenger. The present study aimed to evaluate the performance of the extracts of Pistacia lentiscus, P. lentiscus var. chia and P. terebinthus leaves as additives...

This work sought to explore a new method for using corn silk polysaccharide (CSP) and peanut protein isolate (PPI) to stabilize high internal phase emulsions (HIPEs). An ultrasound-assisted hydrothermal technique was used to make the PPI-CSP covalent...

Chip seal bleeding is influenced by many factors, including design inputs, material properties, and project-specific conditions. It reduces the surface texture of the pavement and thus compromises the safety of the traveling public. Even though facto...

Toxins produced by bacteria and fungi are one of the most important factors which may cause food contamination. The study of detection methods with high sensitivity and throughput is significant for the protection of food safety. In the present study...

The paper compares the performance of two bio-ester and two mineral-oil emulsion metalworking fluids (MWFs) in finish turning an Inconel 718 alloy bar with a high hardness (HB 397 – 418). In this study, a coolant with a lean concentrate diluted...

The possibility of performing proton radiography by using the proton angular spread due to Coulomb multiple scattering was investigated, for the first time, with an emulsion film detector. Two different phantoms were irradiated with the therapeutic p...

In order to overcome the limitations associated with vaginal administration of drugs, e.g., the short contact time of the drug form with the mucosa or continuous carrier wash-out, the development of new carriers for gynecological use is necessary. Fu...

The material behavior of asphalt depends on its composition of aggregate, bitumen, and air voids. Asphalt pavements consist of multiple layers, making the interaction of the materials at the layer boundary important so that any stresses that occur ca...

Crude oil emulsions continue to pose significant challenges across production, transportation, and refining due to their inherent stability and complex interfacial chemistry. Their persistence is driven by the synergistic effects of asphaltenes, resi...

In this study, for enhancing the resistance of probiotics to environmental factors, we designed a microgel beads delivery system loaded with synbiotics. Multiple droplets of W₁/O/W₂ emulsions stabilized with zein–apple pectin hybrid nanoparticl...

Malaria is a life-threatening global epidemic disease and has caused more than 400,000 deaths in 2019. To control and prevent malaria, the development of a vaccine is a potential method. An effective malaria vaccine should either combine antigens fro...

Nanotechnologically engineered protein-based carriers have attracted considerable attention in the pharmaceutical field due to the advantages of superior biocompatibility, tunability and good emulsifying properties. Recently, protein-based Pickering...

The management of brain diseases remains a challenge, particularly because of the difficulty for drugs to cross the blood–brain barrier. Among strategies developed to improve drug delivery, nano-sized emulsions (i.e., nanoemulsions), employed a...

The aim of this study was to prepare and characterize a self-emulsifying drug delivery system (SEDDS) with a high drug load of poorly water-soluble atorvastatin for the enhancement of dissolution and oral bioavailability. Solubility of atorvastatin i...

The water content in fuel–water emulsions can vary from 10% to 30%, and is under control during the process of emulsification. The main task of this study was to obtain near-linear static function for a water-cut meter with capacitive sensors,...

Vitamin D deficiency distresses nearly 50% of the population globally and multiple studies have highlighted the association of Vitamin D with a number of clinical manifestations, including musculoskeletal, cardiovascular, cerebrovascular, and neurolo...

The brown planthopper (BPH), Nilaparvata lugens (Stål), is the most notorious rice insect pest. In order to repel BPH effectively while being environmentally friendly, a new film based on guar gum incorporated with citral (GC film) was formulat...

The initial state, about which there is usually very little direct experimental information, leads to significant fluctuations in the distribution of secondary particles and fragments. In this paper, to estimate the initial state the fragmentation pa...

In this paper, a series of tetrameric surfactants (4C_nSAZs, n = 12, 14, 16) endowed with zwitterionic characteristic were synthesized by a simple and convenient method and their structures were characterized by FT-IR, ¹H NMR and elemental analysis. T...

Nickel nanoparticles are an active research area due to their multiple applications as catalysts in different processes. A variety of preparation techniques have been reported for the synthesis of these nanoparticles, including solvothermal, microwav...

The primary active ingredient in capsicum is capsaicin. However, capsaicin bioavailability is low due to its restricted water solubility, and its potent spicy flavor will further restrict its use in food. This paper provides a complete overview of ca...

Lipid nanoparticles based on multiple emulsion (W/O/W) systems are suitable for incorporating hydrophilic active substances, including iridoid glycosides. This study involved optimization of composition of lipid nanoparticles, incorporation of active...

The fluidic barrier in centrifugal microfluidic platforms is a newly introduced concept for making multiple emulsions and microparticles. In this study, we focused on particle generation application to better characterize this method. Because the phe...

The validation of a cosmetic product is performed by physical analyses and sensory assessment. However, the recruitment of panelists takes a long time and is expensive. Moreover, to apply the product on the skin, microbiology analyses and safety are...

This paper discusses a method of finish turning Inconel 718 alloy to compare machining performance of a naturally aged and used metalworking fluid (MWF), which had been conventionally managed through its life cycle, with the same new unaged product....

Cinnamomum camphora seed kernels (CCSKs) are rich in phytochemicals, especially plant extracts. Phytochemicals play a vital role in therapy due to their strong antioxidant and anti-inflammatory activities. Extracts from CCSK can be obtained through m...

There is a growing demand for efficient medical therapies without undesired side effects that limit their application. Targeted therapies such as deliveries of pharmacologically active compounds to a specific site of action in the human body are stil...

Imitating animal-based products using vegetable proteins is a technological challenge that can be mastered based on their techno-functional properties. These properties of legume proteins can be influenced by multiple factors, among which the macronu...

We report on the development of a method for measuring the permittivity and conductivity of fluids inside a sealed tank (or a pipe) by using an embedded coaxial probe. Permittivity and conductivity in the frequency range 600 MHz to 6 GHz are determin...

Companies regularly face market pressure to develop products faster but they also need to simultaneously incorporate technological constraints, sustainability trends, and customer requirements into their designs, which requires the use of systematic...

The advantages of skin-based vaccination include induction of strong immunity, dose-sparing, and ease of administration. Several technologies for skin-based immunisation in humans are being developed to maximise these key advantages. This route is mo...

Food fraud is a common issue in the modern food industry. The undeclared use of foreign proteins in meat products is a major concern in this context. Oilseeds are ideal for this purpose due to their high protein content and since huge amounts of oil...

Polymeric particles are ideal drug delivery systems due to their cellular uptake-relevant size. Microparticles could be developed for direct injection of drug formulations into a diseased site, such as a tumor, allowing for drug retention and slow dr...

Polymersomes are artificial nanoparticles formed by the self-assembly process of amphiphilic block copolymers composed of hydrophobic and hydrophilic blocks. They can encapsulate hydrophilic molecules in the aqueous core and hydrophobic molecules wit...

Meat substitution by legume proteins in various types of meat products is a common practice. A reliable detection and quantification of these additives is required to control food specifications, especially regarding food fraud. Consequently, a UHPLC...

In this paper we study the dynamics of single cells encapsulated in water-in-oil emulsions in a microchannel. The flow field of a microfluidic channel is coupled to the internal flow field of a droplet through viscous traction at the interface, resul...

The drug-loaded nanocarriers have overcome various challenges compared with the pure chemotherapeutic drug, such as limited bioavailability, multiple drug resistance, poor patient compliance, and adverse drug reactions, offering advantages such as pr...