Skip to Content

66 Results Found

  • Article
  • Open Access
36 Citations
8,574 Views
21 Pages

6 June 2023

Precision object handling and manipulation require the accurate positioning of industrial robots. A common practice for performing end effector positioning is to read joint angles and use industrial robot forward kinematics (FKs). However, industrial...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
8 Citations
6,389 Views
9 Pages

Excimer Laser Surgery: Biometrical Iris Eye Recognition with Cyclorotational Control Eye Tracker System

  • Bojan Pajic,
  • Zeljka Cvejic,
  • Zoran Mijatovic,
  • Dragan Indjin and
  • Joerg Mueller

25 May 2017

A prospective comparative study assessing the importance of the intra-operative dynamic rotational tracking—especially in the treatment of astigmatisms in corneal refractive Excimer laser correction—concerning clinical outcomes is presented. The cycl...

(This article belongs to the Special Issue Optical Methods in Sensing and Imaging for Medical and Biological Applications)
  • Article
  • Open Access
5 Citations
3,286 Views
15 Pages

23 December 2022

The laser tracker has characteristics of high measurement accuracy and wide measurement range. Laser tracker technology, as an effectively large-scale measuring approach, plays a critical role in dynamic measurement. Currently, the static performance...

(This article belongs to the Topic Manufacturing Metrology)
  • Article
  • Open Access
4 Citations
2,702 Views
10 Pages

Precision Calibration of Robot Magnetorheological Finishing System Based on Laser Tracker

  • Yujing Wei,
  • Runmu Cheng,
  • Longxiang Li,
  • Qiang Cheng and ,
  • Yue Pan,
  • Chaoyue Zhu,
  • Jinbo Zhang,
  • Jun Zheng and
  • Bo Ai
  • + 4 authors+ 0 author

10 January 2025

Six-degree-of-freedom industrial robots, known for their low cost and high flexibility, have been extensively applied in optical processing. Precise pose control in robot-based optical processing systems depends on the accurate calibration of the too...

(This article belongs to the Section Optoelectronics and Optical Materials)
  • Article
  • Open Access
6 Citations
3,554 Views
17 Pages

A Transit Tilt and Offset Errors Calibration Method for Improving Laser Tracker Measurement Accuracy Based on the Telecentric Measurement System

  • Shan Wang,
  • Zili Zhang,
  • Dengfeng Dong,
  • Tianci Feng and ,
  • Qifan Qiu,
  • Fanchang Meng,
  • Guoming Wang,
  • Chengjun Cui,
  • Rongyi Ji and
  • Weihu Zhou
  • + 7 authors+ 2 authors

7 March 2024

Laser trackers are instruments used to measure the three-dimensional coordinates of objects with high precision. It is necessary to study calibration methods to identify geometric errors of laser trackers so as to compensate for errors and improve me...

  • Article
  • Open Access
13 Citations
5,278 Views
17 Pages

10 September 2018

An engineering validation of a large optical telescope consists of executing major performing tests at the subsystem level to verify the overall engineering performance of the observatory. Thus, the relative pointing error verification of the telesco...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
7 Citations
4,545 Views
11 Pages

Method for Accuracy Assessment of the Length Measurement Unit of Laser Tracking Systems

  • Maciej Gruza,
  • Adam Gąska,
  • Jerzy A. Sładek,
  • Slavenko M. Stojadinovic and ,
  • Vidosav D. Majstorovic,
  • Piotr Gąska and
  • Wiktor Harmatys
  • + 2 authors+ 0 author

8 October 2021

Laser tracking systems are widely used in large-scale metrology of geometric quantities. Their importance is confirmed by the fact that one of the parts of the ISO 10360 series of standards has been devoted to the issue of assessing their accuracy (I...

(This article belongs to the Special Issue New Trends in Manufacturing Metrology)
  • Article
  • Open Access
22 Citations
6,188 Views
19 Pages

16 August 2017

Terrestrial laser scanning (TLS) is an efficient solution to collect large-scale data. The efficiency can be increased by combining TLS with additional sensors in a TLS-based multi-sensor-system (MSS). The uncertainty of scanned points is not homogen...

(This article belongs to the Section Remote Sensors)
  • Article
  • Open Access
28 Citations
7,640 Views
33 Pages

15 January 2020

Terrestrial laser scanning is used in many disciplines of engineering. Examples include mobile mapping, architecture surveying, archaeology, as well as monitoring and surveillance measurements. For most of the mentioned applications, 3D object captur...

(This article belongs to the Special Issue Mobile Laser Scanning)
  • Article
  • Open Access
2 Citations
613 Views
31 Pages

2 February 2026

In digital-measurement-assisted assembly of large aircraft components, the spatial layout of Enhanced Reference System (ERS) points determines coordinate transformation accuracy and stability. To address manual layout limitations—specifically l...

(This article belongs to the Section Sensor Networks)
  • Article
  • Open Access
10 Citations
5,992 Views
19 Pages

Development of a Dedicated Application for Robots to Communicate with a Laser Tracker

  • Dariusz Szybicki,
  • Paweł Obal,
  • Paweł Penar,
  • Krzysztof Kurc and ,
  • Magdalena Muszyńska and
  • Andrzej Burghardt
  • + 1 author+ 0 author

20 October 2022

The paper presents the concept of operation and methods of using laser trackers in robotics. So far, a small amount of research on software for sharing and exchanging data with trackers has been done. As a result of the identified demand, a proprieta...

(This article belongs to the Special Issue Automation, Operation and Maintenance of Control and Communication Systems)
  • Article
  • Open Access
7 Citations
5,050 Views
16 Pages

Application of Digital Twins in Designing Safety Systems for Robotic Stations

  • Dariusz Szybicki,
  • Paulina Pietruś,
  • Andrzej Burghardt,
  • Krzysztof Kurc and
  • Magdalena Muszyńska

24 October 2024

The aim of this paper is to present examples and original solutions related to the application of the digital twin concept in designing safety systems for robotic stations. This paper includes a review of publications on robot safety systems and digi...

(This article belongs to the Special Issue Automation, Operation and Maintenance of Control and Communication Systems, 2nd Edition)
  • Article
  • Open Access
16 Citations
8,590 Views
17 Pages

Automatic Guidance Method for Laser Tracker Based on Rotary-Laser Scanning Angle Measurement

  • Linghui Yang,
  • Yuanlin Pan,
  • Jiarui Lin,
  • Yang Liu and ,
  • Yue Shang,
  • Shuo Yang and
  • Hanwen Cao
  • + 2 authors+ 0 author

27 July 2020

Laser-tracking measurement systems (laser tracker) have been playing a critical role in large-scale 3D high-precision coordinate measurement. However, the existing visual guidance of laser trackers is still limited by the disadvantages of operator-de...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
17 Citations
3,854 Views
11 Pages

Large-Scale Measurement Layout Optimization Method Based on Laser Multilateration

  • Ying Sheng,
  • Yukun Wang,
  • Siwei Liu,
  • Cuiping Wang and
  • Juntong Xi

28 October 2022

Laser multilateration is a measurement method based on the distance intersection of multiple laser trackers which has been widely used in large-scale measurements. However, the layout of laser trackers has a great impact on the final measurement accu...

(This article belongs to the Section Robotics, Mechatronics and Intelligent Machines)
  • Article
  • Open Access
4 Citations
2,125 Views
11 Pages

Evaluation of the Large-Length Indoor Standard Installation Based on Single Point Scanning

  • Chang’an Hu,
  • Song Hu,
  • Haifeng Sun,
  • Junbo Liu and ,
  • Jiangang Li and
  • Zhuang Yang
  • + 1 author+ 0 author

26 September 2021

The large length indoor standard installation (LLISI) serves as a standard traceability system for large-scale measuring devices, and hence evaluating the accuracy of its measurements during motion is of great importance. A laser tracker, as a single...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
4,508 Views
17 Pages

Laser Tracker-Based on-the-Fly Machine Tool Calibration without Real-Time Synchronization

  • Mark P. Sanders,
  • Matthias Bodenbenner,
  • Philipp Dahlem,
  • Dominik Emonts and ,
  • Benjamin Montavon and
  • Robert H. Schmitt
  • + 1 author+ 0 author

Consistent high volumetric performance of machine tools is an essential requirement for high-quality machining. Periodic machine tool calibration ensures said performance and allows for timely corrective actions preventing scrap or rework. Reducing t...

(This article belongs to the Special Issue Advances in Precision Machining Processes)
  • Article
  • Open Access
16 Citations
4,199 Views
13 Pages

Configuration Optimisation of Laser Tracker Location on Verification Process

  • Sergio Aguado,
  • Pablo Pérez,
  • José Antonio Albajez,
  • Jorge Santolaria and
  • Jesús Velázquez

10 January 2020

Machine tools are verified and compensated periodically to improve accuracy. The main aim of machine tool verification is to reduce the influence of quasi-static errors, especially geometric errors. As these errors show systematic behavior, their inf...

(This article belongs to the Special Issue Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019))
  • Article
  • Open Access
1 Citations
1,737 Views
24 Pages

14 January 2026

A laser tracker is an essential tool in the field of precise geometric measurement. Its fundamental operating idea is a dual-axis rotating device that propels the laser beam to continuously align and measure the attitude of a collaborating target. Su...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
3 Citations
3,698 Views
19 Pages

Multi-Source Data Fusion Method for the Truss Structure Stability Measurement of Space Telescope

  • Tianxiao Xu,
  • Xu He,
  • Xiaohui Zhang,
  • Jing Luo and ,
  • Jinxin Wang,
  • Chenghao Li,
  • Chenxu You,
  • Chengqiang Jiang and
  • Yichen Liu
  • + 4 authors+ 0 author

30 May 2022

It is necessary for large aperture space telescopes to achieve high measurement accuracy for mechanical reference mounting surfaces, complex deformation conditions, and difficulty in describing spatial geometric properties. In this manuscript, we pro...

(This article belongs to the Topic Innovation of Applied System)
  • Article
  • Open Access
2 Citations
1,966 Views
23 Pages

26 February 2026

Accurate measurement of robotic pose is indispensable for large-scale precision manufacturing and robotic calibration, particularly because traditional robotic kinematic models often fall short owing to environmental disturbances and structural uncer...

(This article belongs to the Special Issue Micro/Nano Optical Devices and Sensing Technology)
  • Article
  • Open Access
20 Citations
7,255 Views
21 Pages

Programming of Industrial Robots Using a Laser Tracker

  • Dariusz Szybicki,
  • Paweł Obal,
  • Krzysztof Kurc and
  • Piotr Gierlak

27 August 2022

This paper presents the use of a laser tracker for programming paths of industrial robots. The idea of operation, application, and the offered accuracy of the laser trackers are discussed. Then, the developed method of using a tracker for determining...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
46 Citations
7,642 Views
12 Pages

Configuration Analysis of the ERS Points in Large-Volume Metrology System

  • Zhangjun Jin,
  • Cijun Yu,
  • Jiangxiong Li and
  • Yinglin Ke

22 September 2015

In aircraft assembly, multiple laser trackers are used simultaneously to measure large-scale aircraft components. To combine the independent measurements, the transformation matrices between the laser trackers’ coordinate systems and the assembly coo...

(This article belongs to the Section Sensor Networks)
  • Article
  • Open Access
48 Citations
8,498 Views
13 Pages

12 December 2017

Large-scale surfaces are prevalent in advanced manufacturing industries, and 3D profilometry of these surfaces plays a pivotal role for quality control. This paper proposes a novel and flexible large-scale 3D scanning system assembled by combining a...

(This article belongs to the Special Issue Smart Sensors for Mechatronic and Robotic Systems)
  • Article
  • Open Access
6 Citations
2,711 Views
15 Pages

24 August 2022

The bright stars in the clear night sky with weak background lights should be observed in the traditional deflection of the vertical (DOV) measurement so that the DOV cannot be observed under all-weather conditions, which limits its wide applications...

(This article belongs to the Special Issue Remote Sensing in Space Geodesy and Cartography Methods)
  • Article
  • Open Access
6 Citations
2,790 Views
17 Pages

1 November 2023

Rotary laser scanning measurement systems, such as the workshop measurement positioning system (wMPS), play critical roles in manufacturing industries. The wMPS realizes coordinate measurement through the intersection of multiple rotating fanned lase...

(This article belongs to the Special Issue Optical Measurement Systems)
  • Article
  • Open Access
1 Citations
1,812 Views
24 Pages

Athermalization Design for the On-Orbit Geometric Calibration System of Space Cameras

  • Hongxin Liu,
  • Xuedi Chen,
  • Chunyu Liu,
  • Fei Xing and ,
  • Peng Xie,
  • Shuai Liu,
  • Xun Wang,
  • Yuxin Zhang,
  • Weiyang Song and
  • Yanfang Zhao
  • + 5 authors+ 0 author

27 August 2025

The on-orbit geometric calibration accuracy of high-resolution space cameras directly affects the application value of Earth observation data. Conventional on-orbit geometric calibration methods primarily rely on ground calibration fields, making it...

  • Article
  • Open Access
4 Citations
2,729 Views
18 Pages

23 October 2024

The positional accuracy of satellite imagery is essential for remote sensing cameras. However, vibrations and temperature changes during launch and operation can alter the exterior orientation parameters of remote sensing cameras, significantly reduc...

  • Article
  • Open Access
7 Citations
3,798 Views
17 Pages

Dynamic Target Tracking of Small UAVs in Unstructured Environment

  • Haiqing Li,
  • Mengbo Yang,
  • Yanbo Li,
  • Liming Dai and
  • Chunhui Zhao

21 February 2023

In this paper, an adaptive multi-rotor UAV system of dynamic target tracking and path planning is proposed for the problems of occlusion, lighting change, and similar target interference in an unstructured environment. A DTE-tracker module is designe...

(This article belongs to the Section Computer Science & Engineering)
  • Article
  • Open Access
1 Citations
2,534 Views
20 Pages

3 September 2024

Faced with measurement conditions such as high-temperature forging, strict prohibition of surface contamination, and toxic environments, using the projection point of an optical target projector (referred to as an “optical projector”) as...

(This article belongs to the Collection 3D/4D Optical Imaging Sensors for Surface Measurement, Processing and Applications)
  • Article
  • Open Access
11 Citations
2,320 Views
19 Pages

Highly Efficient Four-Rod Pumping Approach for the Most Stable Solar Laser Emission

  • Miguel Catela,
  • Dawei Liang,
  • Cláudia R. Vistas,
  • Dário Garcia and ,
  • Hugo Costa,
  • Bruno D. Tibúrcio and
  • Joana Almeida
  • + 2 authors+ 0 author

4 October 2022

We report a significant numerical improvement in multi-rod laser efficiency, with an enhanced solar tracking error compensation capacity for a heliostat-parabolic system. The solar laser head was composed of a fused silica conical lens and a single c...

(This article belongs to the Special Issue Power Electronics and Power Conversion-Related Applications of Micro Energy Devices, 2nd Edition)
  • Article
  • Open Access
28 Citations
9,692 Views
11 Pages

4 May 2012

A novel measurement prototype based on a mobile vehicle that carries a laser scanning sensor is proposed. The prototype is intended for the automated measurement of the interior 3D geometry of large-diameter long-stepped pipes. The laser displacement...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
4 Citations
2,528 Views
13 Pages

1 February 2024

Distributed laser measurement systems, widely used in high-end equipment such as airplanes, ships, and other manufacturing fields, face challenges in large spatial measurements due to laser plane obstructions and weak intersections. This paper introd...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
1,157 Views
21 Pages

Cycling is one of the most popular sports and recreational activities. Millions of new people start to integrate bicycling into their daily routines every year. Fitness and activity trackers are the most powerful motivation tools for cycling novices...

(This article belongs to the Special Issue Advancements in Optical Measurement Devices and Technologies: 2nd Edition)
  • Article
  • Open Access
5 Citations
4,531 Views
15 Pages

Enhancing Positional Accuracy of the XY-Linear Stage Using Laser Tracker Feedback and IT2FLS

  • Mojtaba A. Khanesar,
  • Minrui Yan,
  • Mohammed Isa,
  • Samanta Piano and ,
  • Mohammad A. Ayoubi and
  • David T. Branson
  • + 1 author+ 0 author

20 April 2023

This paper proposes a calibration algorithm to improve the positional accuracies of an industrial XY-linear stage. Precision positioning of these linear stages is required to maintain highly accurate object handling and manipulation. However, due to...

(This article belongs to the Special Issue Design and Control of Industrial Robots)
  • Article
  • Open Access
2 Citations
1,696 Views
21 Pages

9 November 2025

Measurement systems such as laser trackers and 3D imaging systems are being increasingly adopted across the manufacturing industry. These metrology technologies can allow for live, high-precision measurement in a digital system, enabling the spatial...

(This article belongs to the Special Issue Advances in Optical 3D Metrology)
  • Article
  • Open Access
3 Citations
3,780 Views
6 Pages

Measurement Vertex Position of a Large Aspheric Mirror

  • Jie Li,
  • Fengtao Yan,
  • Lin Chen,
  • Jie Yang and
  • Yongjian Wan

13 March 2019

We present a novel method to accurately measure the vertex position of a large aspheric mirror with a phasing measuring interferometer, a laser tracker, and a micro alignment telescope. The method consists of rotating the mirror by 180° about its...

(This article belongs to the Special Issue Precision Dimensional Measurements)
  • Article
  • Open Access
15 Citations
4,699 Views
23 Pages

29 April 2023

Terrestrial laser scanners (TLSs) are a standard method for 3D point cloud acquisition due to their high data rates and resolutions. In certain applications, such as deformation analysis, modelling uncertainties in the 3D point cloud is crucial. This...

(This article belongs to the Special Issue Machine Learning for LiDAR Point Cloud Analysis)
  • Article
  • Open Access
48 Citations
9,648 Views
15 Pages

20 October 2020

This paper presents an automated calibration method for industrial robots, based on the use of (1) a novel, low-cost, wireless, 3D measuring device mounted on the robot end-effector and (2) a portable 3D ball artifact fixed with respect to the robot...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
1 Citations
1,359 Views
20 Pages

24 October 2025

This research tackles the intricate machining properties of cylindrical aspheric surfaces with a versatile adaption approach utilizing a robotic arm and a compact tool head, incorporating trajectory optimization. A three-step integrated error compens...

(This article belongs to the Section Robotics, Mechatronics and Intelligent Machines)
  • Article
  • Open Access
12 Citations
4,622 Views
15 Pages

29 February 2024

A gyroscope-free strapdown inertial navigation system (GFSINS) solves the carrier attitude through the reasonable spatial combination of accelerometers, with a particular focus on the precision of angular velocity calculation. This paper conducts an...

(This article belongs to the Special Issue MEMS Inertial Device, 2nd Edition)
  • Article
  • Open Access
10 Citations
3,211 Views
17 Pages

Study on Machine Tool Positioning Uncertainty Due to Volumetric Verification

  • Sergio Aguado,
  • Pablo Pérez,
  • José Antonio Albajez,
  • Jorge Santolaria and
  • Jesús Velazquez

26 June 2019

Volumetric verification is based on the machine tool (MT) kinematic model, along with its geometric errors. Although users often ignore the uncertainty of verification, the use of the MT as a traceable measurement system in the manufacturing process...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
5 Citations
1,751 Views
30 Pages

10 December 2025

In advanced manufacturing, accurate and reliable 3D geometry measurement is vital for the quality control of large-sized components with multiple small key local features. To obtain both the geometric form and spatial position of these local features...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
379 Views
20 Pages

Laser Speckle Velocimeter for Mobile Industrial Robot Odometry

  • Sam J. Gibson,
  • Thomas O. H. Charrett,
  • Fariborz Eghtedari and
  • Ralph P. Tatam

23 September 2026

This paper reports the design and construction of a laser speckle velocimeter for application to mobile industrial robots. It is intended to supplement the typically used simultaneous localisation and mapping (SLAM) approach by providing enhanced odo...

(This article belongs to the Special Issue Advanced Sensing for Intelligent Robot Localization and Navigation)
  • Article
  • Open Access
8 Citations
4,846 Views
13 Pages

Analyses of Key Variables to Industrialize a Multi-Camera System to Guide Robotic Arms

  • Pablo Puerto,
  • Ibai Leizea,
  • Imanol Herrera and
  • Asier Barrios

9 January 2023

Robotic arms are widely used in sectors such as automotive or assembly logistics due to their flexibility and cost. Other manufacturing sectors would like to take advantage of this technology, however, higher accuracy is required for their purposes....

(This article belongs to the Section Sensors and Control in Robotics)
  • Article
  • Open Access
36 Citations
17,755 Views
12 Pages

People Detection and Tracking Using LIDAR Sensors

  • Claudia Álvarez-Aparicio,
  • Ángel Manuel Guerrero-Higueras,
  • Francisco Javier Rodríguez-Lera,
  • Jonatan Ginés Clavero and ,
  • Francisco Martín Rico and
  • Vicente Matellán
  • + 1 author+ 0 author

31 August 2019

The tracking of people is an indispensable capacity in almost any robotic application. A relevant case is the @home robotic competitions, where the service robots have to demonstrate that they possess certain skills that allow them to interact with t...

(This article belongs to the Special Issue Robotics in Spain 2019)
  • Article
  • Open Access
1 Citations
1,693 Views
14 Pages

15 June 2025

This paper presents a novel, measurement-driven method for the simultaneous estimation of the User Coordinate System (UCS) and Tool Center Point (TCP) in industrial robot systems, formulated as a solution to the AX = YB calibration problem. The propo...

(This article belongs to the Special Issue Automation and Robotics: Latest Achievements, Challenges and Prospects, Volume 2)
  • Article
  • Open Access
39 Citations
7,664 Views
16 Pages

31 January 2021

Based on the current situation of high precision and comparatively low APA (absolute positioning accuracy) in industrial robots, a calibration method to enhance the APA of industrial robots is proposed. In view of the "hidden" characteristics of the...

(This article belongs to the Special Issue Robots Dynamics: Application and Control)
  • Article
  • Open Access
10 Citations
5,441 Views
22 Pages

Automatic Real-Time Pose Estimation of Machinery from Images

  • Marcel Bertels,
  • Boris Jutzi and
  • Markus Ulrich

29 March 2022

The automatic positioning of machines in a large number of application areas is an important aspect of automation. Today, this is often done using classic geodetic sensors such as Global Navigation Satellite Systems (GNSS) and robotic total stations....

(This article belongs to the Special Issue Sensors for Construction Automation and Management)
  • Article
  • Open Access
8 Citations
3,140 Views
18 Pages

Robot Calibration Sampling Data Optimization Method Based on Improved Robot Observability Metrics and Binary Simulated Annealing Algorithm

  • Huakun Jia,
  • Hanbo Zeng,
  • Jiyan Zhang,
  • Xiangyang Wang and ,
  • Yang Lu and
  • Liandong Yu
  • + 1 author+ 0 author

24 September 2024

As the societal demand for precision in industrial robot operations increases, calibration can enhance the end-effector positioning accuracy of robots. Sampling data optimization plays an important role in improving the calibration effect. In this st...

(This article belongs to the Special Issue Applied Robotics in Mechatronics and Automation)
  • Article
  • Open Access
196 Views
25 Pages

29 October 2026

In two-dimensional laser SLAM exploration and mapping in complex indoor environments, scan matching is sensitive to the initial pose, error accumulation, and redundant map updates. To address these issues, an MDF-ALC-SLAM method is proposed. Firstly,...

(This article belongs to the Special Issue Interdisciplinary Approaches and Applications of Optics & Photonics, 2nd Edition)

of 2