Skip to Content

226 Results Found

  • Article
  • Open Access
13 Citations
4,072 Views
17 Pages

Towards Eco-Flowable Concrete Production

  • Maria Rashidi,
  • Alireza Joshaghani and
  • Maryam Ghodrat

7 February 2020

Environmental concerns have increased due to the amount of unused/expired plastic medical waste generated in hospitals, laboratories, and other healthcare facilities, in addition to the fact that disposing of such wastes with extremely low degradatio...

(This article belongs to the Special Issue A Sustainable Revolution: Let's Go Sustainable to Get our Globe Cleaner)
  • Article
  • Open Access
209 Views
19 Pages

18 September 2026

In this study, the Box–Behnken response surface method was used to investigate the effects of coarse aggregate gradation (percentage of 5–10 mm stone), water-reducing agent mixture, and aggregate-to-cementitious material ratio on the work...

(This article belongs to the Special Issue Advanced Concrete and Cementitious Composite Materials)
  • Article
  • Open Access
13 Citations
3,769 Views
17 Pages

28 May 2025

Three-dimensional printing concrete (3DPC) has garnered significant attention for its construction efficiency and complex geometric capabilities. However, its mechanical properties differ markedly from cast-in-place concrete due to interlayer/intrala...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
261 Views
18 Pages

25 September 2026

To address the coupled effects of multiple factors on the flowability of fabric-form concrete during construction, as well as the reliance of conventional mixture-proportion design on empirical experience and its low trial-mixing efficiency, this stu...

  • Article
  • Open Access
21 Citations
3,574 Views
28 Pages

8 August 2023

The durability of concrete requires a dense microstructure which can be achieved by using self-compacting concrete (SCC). Both calcined clay (CC) and rice husk ash (RHA) are promising supplementary cementitious materials (SCMs) that can partially rep...

(This article belongs to the Special Issue The 15th Anniversary of Materials—Recent Advances in Construction and Building Materials)
  • Article
  • Open Access
3 Citations
1,976 Views
18 Pages

Influence of Admixture Source on Fresh Properties of Self-Consolidating Concrete

  • Nader Ghafoori,
  • Aderemi Gbadamosi,
  • Hamidou Diawara and
  • Ariful Hasnat

1 July 2024

The study presented herein was intended to (1) compare the optimum (minimum) dosage requirements of four different sources of polycarboxylate-based high-range water-reducing admixtures (HRWRAs) and viscosity-modifying admixtures (VMAs) in attaining s...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
6 Citations
3,145 Views
17 Pages

Three-Dimensional Printable Concrete by an Ultra-Thin Nozzle and Fully Sealed Extrusion

  • Jing Shen,
  • Yujia Li,
  • Xiaoman Zhang,
  • Yangbo Li and ,
  • Chaohui Huang and
  • Wei Luo
  • + 1 author+ 0 author

Due to the molding-free property and dry shrinkage of extrusion-based three-dimensional printable concrete (3DPC), the precision issues of 3DPC have not been solved effectively. One of the viable solutions for 3DPC precision improvement is to print u...

(This article belongs to the Topic Novel Cementitious Materials)
  • Article
  • Open Access
7 Citations
2,252 Views
20 Pages

Self-Compacting Mixtures of Fair-Faced Concrete Based on GGBFS and a Multicomponent Chemical Admixture—Technological and Rheological Properties

  • Oksana A. Larsen,
  • Svetlana V. Samchenko,
  • Olga V. Zemskova,
  • Andrey V. Korshunov and
  • Artyom A. Solodov

6 November 2024

The use of superplasticizers in a self-compacting concrete mix without the addition of a foaming agent in practice leads to a well-known problem associated with increased air entrainment and promotes the formation of harmful large bubbles, high-void...

(This article belongs to the Special Issue Safety and Optimization of Building Structures—2nd Edition)
  • Article
  • Open Access
5 Citations
2,340 Views
25 Pages

Specific Design of a Self-Compacting Concrete with Raw-Crushed Wind-Turbine Blade

  • Manuel Hernando-Revenga,
  • Víctor Revilla-Cuesta,
  • Nerea Hurtado-Alonso,
  • Javier Manso-Morato and
  • Vanesa Ortega-López

19 December 2024

Wind-turbine blades pose significant disposal challenges in the wind-energy sector due to the increasing demand for wind farms. Therefore, this study researched the revaluation of Raw-Crushed Wind-Turbine Blade (RCWTB), obtained through a non-selecti...

(This article belongs to the Special Issue Novel Cement and Concrete Materials)
  • Article
  • Open Access
14 Citations
3,174 Views
18 Pages

30 July 2020

The low flowability and high viscosity of ultra-high performance concrete (UHPC), which is mainly caused by the silica fume (SF) agglomeration and low water–binder ratio, is a severe defect in its engineering applications. Herein, a novel organ...

  • Article
  • Open Access
15 Citations
4,842 Views
16 Pages

23 March 2023

Waste glass (WG), as a nonbiodegradable material, poses a threat to environmental protection. The reuse of WG as a raw material to replace cement or aggregate in concrete production is gaining attention for recycling purposes. However, the optimal pr...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
9 Citations
3,325 Views
23 Pages

Understanding the Role of Quartz Powder Content and Fineness on the Micro-Structure and Mechanical Performance of UHPC

  • Jianguang Xu,
  • Yongsheng Li,
  • Yue Huang,
  • Guojian Yuan and ,
  • Zhonglu Cao,
  • Wei Zhang,
  • Heping Zheng,
  • Yun Zang,
  • Xingtai Mao and
  • Mengmeng Li
  • + 5 authors+ 0 author

30 April 2025

To enhance the microstructure and mechanical properties and to optimize the formulations of high-strength and high-flow ultra-high-performance concrete (UHPC), the effects of different quartz powder contents, fineness, and curing temperatures of UHPC...

(This article belongs to the Special Issue Functional Improvement, Characterization and Simulation of Cement-Based Materials)
  • Article
  • Open Access
5 Citations
1,767 Views
23 Pages

Initial Approach to Self-Compacting Concrete with Raw-Crushed Wind-Turbine Blade: Fresh, CFD and Mechanical Analysis

  • Manuel Hernando-Revenga,
  • Víctor Revilla-Cuesta,
  • José A. Chica,
  • Vanesa Ortega-López and
  • Juan M. Manso

30 October 2024

The production of raw-crushed wind-turbine blade (RCWTB) and its addition to conventionally designed self-compacting Concrete (SCC) enable us to provide a second life to wind-turbine blades. However, SCC containing RCWTB must show proper fresh behavi...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
3 Citations
2,181 Views
13 Pages

Case Study on the Performance of High-Flowing Steel-Fiber-Reinforced Mixed-Sand Concrete

  • Haibin Geng,
  • Yanyan Zhang,
  • Huijuan Wang,
  • Hao Zhong and ,
  • Changyong Li and
  • Fenglan Li
  • + 1 author+ 0 author

17 October 2023

To promote the efficient utilization of bulk solid wastes, including superfine river sand and fly ash, high-flowing steel-fiber-reinforced mixed-sand concrete (SFRMC) was developed in this study. Superfine river sand and coarse manufactured sand were...

(This article belongs to the Section Hybrid and Composite Crystalline Materials)
  • Article
  • Open Access
48 Citations
8,629 Views
15 Pages

Autogenous Shrinkage, Microstructure, and Strength of Ultra-High Performance Concrete Incorporating Carbon Nanofibers

  • Jacob L. G. Lim,
  • Sudharshan N. Raman,
  • Md. Safiuddin,
  • Muhammad Fauzi Mohd. Zain and
  • Roszilah Hamid

21 January 2019

The mix design of ultra-high performance concrete (UHPC) is complicated by the presence of many “ingredients.” The fundamental packing density allows a simpler mix design with fewer ingredients to achieve optimum packing density and dense...

(This article belongs to the Special Issue New and Emerging Construction Materials)
  • Article
  • Open Access
17 Citations
4,351 Views
33 Pages

Prediction of Ultra-High-Performance Concrete (UHPC) Properties Using Gene Expression Programming (GEP)

  • Yunfeng Qian,
  • Jianyu Yang,
  • Weijun Yang,
  • Ali H. Alateah and ,
  • Ali Alsubeai,
  • Abdulgafor M. Alfares and
  • Muhammad Sufian
  • + 2 authors+ 0 author

28 August 2024

In today’s digital age, innovative artificial intelligence (AI) methodologies, notably machine learning (ML) approaches, are increasingly favored for their superior accuracy in anticipating the characteristics of cementitious composites compare...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
16 Citations
4,629 Views
16 Pages

18 January 2025

In this work, we propose a Navier–Stokes-Informed Neural Network (NSINN) as a surrogate approach to predict the localized flow behavior of cementitious materials for advancing 3D additive construction technology to gain fundamental insights int...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
1 Citations
865 Views
20 Pages

8 November 2025

This study systematically investigated the effects of mix design conditions (water–cement ratio) and rubber properties (particle size, surface area, and mixing ratio) on the flowability and mechanical characteristics of rubberized concrete, in...

(This article belongs to the Special Issue Feature Papers in Section "Engineering and Materials" 2025)
  • Article
  • Open Access
23 Citations
4,476 Views
21 Pages

19 February 2021

High-performance self-consolidating concrete is one of the most promising developments in the construction industry. Nowadays, concrete designers and ready-mix companies are seeking optimum concrete in terms of environmental impact, cost, mechanical...

(This article belongs to the Special Issue Supplementary Cementitious Materials in Concrete)
  • Article
  • Open Access
3,292 Views
36 Pages

Investigating Reinforcement Shadow Visibility on Formed Concrete Surfaces Using Visual Inspection and Colour Variation Analysis

  • Ignas Šliogeris,
  • Donatas Rekus,
  • Svajūnas Juočiūnas,
  • Ruben Paul Borg and
  • Mindaugas Daukšys

31 March 2025

The research presented in this article seeks to identify the possible causes of reinforcement shadows (RS) on the surface of concrete test specimen produced under laboratory conditions. Different hypotheses about RS were selected based on factory pra...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
37 Citations
14,822 Views
16 Pages

3 March 2018

Workability is regarded as one of the important parameters of high-performance concrete and monitoring it is essential in concrete quality management at construction sites. The conventional workability test methods are basically based on length and t...

(This article belongs to the Special Issue Novel Methodologies to Interpret Non-Destructive Testing and Structural Health Monitoring Data)
  • Feature Paper
  • Review
  • Open Access
202 Citations
11,079 Views
24 Pages

17 March 2021

Although ultra high-performance concrete (UHPC) has great performance in strength and durability, it has a disadvantage in the environmental aspect; it contains a large amount of cement that is responsible for a high amount of CO2 emissions from UHPC...

(This article belongs to the Special Issue High Performance Concrete)
  • Article
  • Open Access
45 Citations
5,266 Views
23 Pages

Development of Self-Compacting Concrete Incorporating Rice Husk Ash with Waste Galvanized Copper Wire Fiber

  • Md. Habibur Rahman Sobuz,
  • Ayan Saha,
  • Jannatul Ferdous Anamika,
  • Moustafa Houda and ,
  • Marc Azab,
  • Abu Sayed Mohammad Akid and
  • Md. Jewel Rana
  • + 2 authors+ 0 author

This research work is devoted to the experimental investigation of both rheological and mechanical properties of self-compacting concrete (SCC) produced with waste galvanized copper wire fiber and rice husk ash (RHA). In the study, three different vo...

(This article belongs to the Collection Sustainable Building Materials: Design and Digitization)
  • Article
  • Open Access
64 Citations
5,566 Views
16 Pages

The Effect of the Morphology of Coarse Aggregate on the Properties of Self-Compacting High-Performance Fibre-Reinforced Concrete

  • Krzysztof Ostrowski,
  • Łukasz Sadowski,
  • Damian Stefaniuk,
  • Daniel Wałach and ,
  • Tomasz Gawenda,
  • Konrad Oleksik and
  • Ireneusz Usydus
  • + 2 authors+ 0 author

7 August 2018

When understanding the effect of the morphology of coarse aggregate on the properties of a fresh concrete mixture, the strength and deformability of self-compacting high-performance fibre-reinforced concrete (SCHPFRC) can be seen to be critical for i...

  • Technical Note
  • Open Access
13 Citations
6,114 Views
17 Pages

29 August 2016

Self-compacting lightweight concrete (SCLC) is a promising construction material for building applications, but most SCLCs today are made with river sand (RS). There is an increasing demand for environmental protection, as well as materials with a hi...

  • Article
  • Open Access
14 Citations
3,750 Views
17 Pages

L-Box Form Filling of Thixotropic Cementitious Paste and Mortar

  • Mareike Thiedeitz,
  • Nasime Habib,
  • Thomas Kränkel and
  • Christoph Gehlen

9 April 2020

Rheological properties of cementitious pastes and mortar affect the casting, placement, and setting properties of fresh concrete. Fundamental rheological knowledge thus helps in predicting concrete flowability and workability. Empirical equations cor...

(This article belongs to the Special Issue Rheology of Reactive, Multiscale, Multiphase Construction Materials)
  • Article
  • Open Access
2 Citations
1,827 Views
21 Pages

The Impact of Superplasticizer Chemical Structure on Reactive Powder Concrete Properties

  • Stefania Grzeszczyk,
  • Aneta Matuszek-Chmurowska,
  • Natalina Makieieva,
  • Teobald Kupka and
  • Adam Sudoł

3 April 2025

It is difficult to obtain efficient flowability of reactive powder concrete (RPC) mix due to a low water/binder ratio. The improvement of material flowability could be achieved by using the latest generation polycarboxylate superplasticizers (SPs), a...

(This article belongs to the Special Issue Concretes and Cement-Based Composites: Additives/Admixtures, Hydration Process and Durability Research (3rd Edition))
  • Article
  • Open Access
21 Citations
4,045 Views
17 Pages

Development of Test Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing

  • Youssef Mortada,
  • Malek Mohammad,
  • Bilal Mansoor,
  • Zachary Grasley and
  • Eyad Masad

19 September 2022

This study proposes test methods for assessing the printability of concrete materials for Additive Manufacturing. The printability of concrete is divided into three main aspects: flowability, setting time, and buildability. These properties are consi...

(This article belongs to the Special Issue 3D Printing Techniques in Construction Materials)
  • Article
  • Open Access
178 Citations
16,236 Views
23 Pages

Glass Fibers Reinforced Concrete: Overview on Mechanical, Durability and Microstructure Analysis

  • Jawad Ahmad,
  • Roberto Alonso González-Lezcano,
  • Ali Majdi,
  • Nabil Ben Kahla and ,
  • Ahmed Farouk Deifalla and
  • Mohammed A. El-Shorbagy
  • + 1 author+ 0 author

22 July 2022

Prior studies in the literature show promising results regarding the improvements in strength and durability of concrete upon incorporation of glass fibers into concrete formulations. However, the knowledge regarding glass fiber usage in concrete is...

(This article belongs to the Special Issue Advances in Fiber-Reinforced Cementitious Composites for Concrete and Masonry Structures)
  • Article
  • Open Access
61 Citations
6,771 Views
24 Pages

Concrete Made with Iron Ore Tailings as a Fine Aggregate: A Step towards Sustainable Concrete

  • Mohamed Moafak Arbili,
  • Muwaffaq Alqurashi,
  • Ali Majdi,
  • Jawad Ahmad and
  • Ahmed Farouk Deifalla

8 September 2022

The need for low-cost raw materials is driven by the fact that iron ore tailings, a prevalent kind of hazardous solid waste, have created major environmental issues. Although many studies have focused on using iron ore tailing (IOT) in concrete and h...

(This article belongs to the Special Issue New Advances in Cement and Concrete Research)
  • Article
  • Open Access
6 Citations
3,260 Views
14 Pages

The Influence of Iron Tailings Powder on the Properties on the Performances of Cement Concrete with Machine-Made Sand

  • Lin Wang,
  • Genkun Du,
  • Xinxin He,
  • Zicheng Wei and ,
  • Yubo Xu,
  • Shuai Li and
  • Xuejuan Liu
  • + 2 authors+ 0 author

Iron tailings powder (ITP) is a kind of solid waste, which pollutes the environment, without any treatment. The application of ITP in cement concrete is a good choice. In this study, the influence of ITP on the flowability, compressive strength, chlo...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Review
  • Open Access
104 Citations
10,695 Views
26 Pages

A Review on Failure Modes and Cracking Behaviors of Polypropylene Fibers Reinforced Concrete

  • Jawad Ahmad,
  • Dumitru Doru Burduhos-Nergis,
  • Mohamed Moafak Arbili,
  • Saleh M. Alogla and ,
  • Ali Majdi and
  • Ahmed Farouk Deifalla
  • + 1 author+ 0 author

11 November 2022

Despite being strong under compression, concrete is rather weak when subjected to tensile stress. Concrete has been reinforced with a variety of materials over time in order to resist tensile stresses. Among various types of fibers, polypropylene fib...

(This article belongs to the Collection Advanced Concrete Materials in Construction)
  • Article
  • Open Access
44 Citations
5,366 Views
22 Pages

9 March 2020

In this paper, the authors have focused on shear-induced particle migration (SIPM), its effect on concrete flow patterns, and lubricating layer formation during pumping. For this purpose, various volume-fractions ϕ of aggregates were selected. The pa...

(This article belongs to the Special Issue Rheology of Reactive, Multiscale, Multiphase Construction Materials)
  • Article
  • Open Access
24 Citations
3,846 Views
17 Pages

17 November 2020

High-strength concrete is used to provide quality control for concrete structures, yet it has the drawback of brittleness. The inclusion of fibers improves the ductility of concrete but negatively affects the fresh properties of fiber-reinforced conc...

  • Article
  • Open Access
8 Citations
4,996 Views
12 Pages

22 May 2018

A variety of special concrete structures have been designed for domestic and overseas construction markets that require highly advanced construction technology. Therefore, it is necessary to secure quantitative construction technology and develop a s...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
15 Citations
2,887 Views
20 Pages

Behavior of Lightweight Self-Compacting Concrete with Recycled Tire Steel Fibers

  • Abdullah Alabdulkarim,
  • Ahmed K. El-Sayed,
  • Abdulaziz S. Alsaif,
  • Galal Fares and
  • Abdulrahman M. Alhozaimy

9 August 2024

The utilization of recycled materials in concrete technology has gained significant attention in recent years, promoting sustainability and resource conservation. This paper investigates the behavior of lightweight self-compacting concrete (LWSCC) wi...

(This article belongs to the Special Issue Sustainable Development: Recycling and Reuse of Waste Materials in the Construction Industry—2nd Edition)
  • Article
  • Open Access
12 Citations
2,946 Views
14 Pages

Effect of the Alkyl Density of Acrylic Acid Ester on the Viscosity-Reducing Effect of Polycarboxylate Superplasticizer

  • Yingying Chen,
  • Yujie Chen,
  • Yuan Liu,
  • Jia Tao and ,
  • Runxia Liu,
  • Ziwei Li,
  • Fei Liu and
  • Min Li
  • + 3 authors+ 0 author

27 October 2023

Concrete is vital for the development of modern buildings. However, they suffer from the high viscosity problem in their application process due to the use of a low water–cement ratio in order to maintain their high strength. Developing PCEs wi...

(This article belongs to the Section Macromolecular Chemistry)
  • Article
  • Open Access
74 Citations
6,766 Views
24 Pages

Basalt Fibers Reinforced Concrete: Strength and Failure Modes

  • Buthainah Nawaf AL-Kharabsheh,
  • Mohamed Moafak Arbili,
  • Ali Majdi,
  • Saleh M. Alogla and ,
  • A. Hakamy,
  • Jawad Ahmad and
  • Ahmed Farouk Deifalla
  • + 2 authors+ 0 author

20 October 2022

The low tensile capacity of concrete often results in brittle failure without any warning. One way to cope with this issue is to add fibers and essentially improve the tensile strength (TS) behavior of concrete and offset its undesirable brittle fail...

(This article belongs to the Special Issue Novel Fiber Reinforced Polymer (FRP) Technologies for Structures)
  • Article
  • Open Access
24 Citations
4,658 Views
17 Pages

A Feasibility Study of Low Cement Content Foamed Concrete Using High Volume of Waste Lime Mud and Fly Ash for Road Embankment

  • Zhanchen Li,
  • Huaqiang Yuan,
  • Faliang Gao,
  • Hongzhi Zhang and ,
  • Zhi Ge,
  • Kai Wang,
  • Renjuan Sun,
  • Yanhua Guan,
  • Yifeng Ling and
  • Nengdong Jiang
  • + 5 authors+ 0 author

23 December 2021

This paper aims to study the feasibility of low cement content foamed concrete using waste lime mud (LM) and fly ash (FA) as mineral additives. The LM/FA ratio was first optimized based on the compressive strength. Isothermal calorimetry test, ESEM,...

(This article belongs to the Special Issue Multifunctional Cementitious Composites: Manufacturing and Characterization)
  • Proceeding Paper
  • Open Access
1 Citations
3,239 Views
7 Pages

26 October 2023

Self-compacting concrete (SCC) is a highly flowable, self-leveling, and non-segregating type of concrete that requires no form of vibration to maintain its uniformity throughout the mixture as well as being able to perform in an outstanding manner in...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
75 Citations
6,123 Views
17 Pages

A Step towards Sustainable Self-Compacting Concrete by Using Partial Substitution of Wheat Straw Ash and Bentonite Clay Instead of Cement

  • Jawad Ahmad,
  • Rana Faisal Tufail,
  • Fahid Aslam,
  • Amir Mosavi and ,
  • Rayed Alyousef,
  • Muhammad Faisal Javed,
  • Osama Zaid and
  • Muhammad Sohaib Khan Niazi
  • + 3 authors+ 0 author

15 January 2021

Self-compacting concrete (SCC) is a special type of concrete that is highly flowable, nonsegregating and spread into place by its own weight, completely filling the formwork even in the presence of dense reinforcement and then encapsulating the rebar...

  • Article
  • Open Access
371 Citations
36,647 Views
27 Pages

A Comprehensive Review on the Ground Granulated Blast Furnace Slag (GGBS) in Concrete Production

  • Jawad Ahmad,
  • Karolos J. Kontoleon,
  • Ali Majdi,
  • Muhammad Tayyab Naqash and ,
  • Ahmed Farouk Deifalla,
  • Nabil Ben Kahla,
  • Haytham F. Isleem and
  • Shaker M. A. Qaidi
  • + 3 authors+ 0 author

18 July 2022

In the last few decades, the concrete industry has been massively expanded with the adoption of various kinds of binding materials. As a substitute to cement and in an effort to relieve ecofriendly difficulties linked with cement creation, the utiliz...

(This article belongs to the Special Issue Building Materials and Sustainable Architecture)
  • Article
  • Open Access
13 Citations
3,012 Views
12 Pages

18 August 2023

Controlled low-strength materials (CLSMs) have been developed using various byproducts for backfilling or void-filling around pipelines or culvert boxes. However, these CLSMs have encountered issues related to their inadequate placement around underg...

(This article belongs to the Special Issue Geomaterials: Latest Advances in Materials for Construction and Engineering Applications)
  • Article
  • Open Access
64 Citations
5,918 Views
17 Pages

High Performance Self-Compacting Concrete with Electric Arc Furnace Slag Aggregate and Cupola Slag Powder

  • Israel Sosa,
  • Carlos Thomas,
  • Juan Antonio Polanco,
  • Jesus Setién and
  • Pablo Tamayo

22 January 2020

The development of self-compacting concretes with electric arc furnace slags is a novelty in the field of materials and the production of high-performance concretes with these characteristics is a further achievement. To obtain these high-strength, l...

(This article belongs to the Special Issue High-Performance Eco-Efficient Concrete)
  • Article
  • Open Access
22 Citations
3,775 Views
10 Pages

19 August 2020

Superplasticizers (cement concrete water reducers) are applied to improve the flowability of calcium-rich, alkali-activated materials, with inconsistent results. However, superplasticizer applications are limited in metakaolin-based geopolymers. The...

(This article belongs to the Special Issue Advances in Microporous and Mesoporous Materials)
  • Proceeding Paper
  • Open Access
391 Views
14 Pages

The Influence of Waste Cherry Pits as Coarse Aggregate and Waste Ceramics Powder on Rheological Properties and Strength of Self-Compacting Concrete

  • Rafal Ahmed Abbas Ali,
  • Abdulkareem Adil Al-Ani,
  • Nahla N. Hilal,
  • Mohammad I. Al Biajawi and ,
  • Sheelan Mahmoud Hama and
  • Zouaoui R. Harrat
  • + 1 author+ 0 author

Recently, interest has grown in using alternatives to cement and aggregates to improve concrete and reduce its environmental impact. This study explores the use of cherry pit waste (CPW) as a partial substitute for coarse aggregates in self-compactin...

(This article belongs to the Proceedings of The 34th International Scientific Conference on Organization and Technology of Maintenance (OTO 2025))
  • Article
  • Open Access
1 Citations
1,124 Views
26 Pages

25 January 2026

Rheology plays an important role in the 3D concrete printing technology, because it directly governs the flowability and shape retention of the material, impacting both the printing process and the final quality of the obtained structure. Local raw m...

(This article belongs to the Special Issue Advances and Applications of Recycled Concrete in Green Building)
  • Article
  • Open Access
1 Citations
448 Views
25 Pages

3 August 2026

Ultra-high-performance concrete (UHPC) typically contains high cement and steel-fiber contents, leading to high cost and carbon emissions. This study developed a low-carbon UHPC by partially replacing cement with industrial solid waste (ISW) composed...

(This article belongs to the Special Issue Cracking Risks in Blended Cement-Based Concrete: Mechanisms, Evaluation and Control)
  • Article
  • Open Access
62 Citations
5,672 Views
11 Pages

8 November 2020

The excessive production of worn tires remaining from the transportation system and the lack of proper procedures to recycle or reuse these materials have caused critical environmental issues. Due to the rubber’s toughness, this material could...

  • Article
  • Open Access
2 Citations
1,387 Views
20 Pages

25 August 2025

With rapid industrialization, large quantities of industrial solid waste are generated annually. In Panzhihua, China, approximately 300,000 tons of limestone mine dust filter residue (LMDFR) is produced. This study investigates the properties of LMDF...

(This article belongs to the Special Issue Advances in Sustainable Construction Materials, Third Edition)

of 5