The escalating discharge of textile wastewater with plenty of dye and salt has resulted in serious environmental risks. Membranes assembled from two-dimensional (2D) nanomaterials with many tunable interlayer spacings are promising materials for dye/...
Nanofiltration membranes are of great significance to the treatment of dye wastewater. Interfacial polymerization is a widely used method to fabricate nanofiltration membranes. In this study, the interaction of tannic acid-assisted polyethylene polya...
Efficient dye/salt separation poses a great challenge to nanofiltration (NF) membrane technology in the desalting sector of the dye synthesis industry. In this study, we fabricated a novel loose polyester NF membrane via an interfacial polymerization...
Multifunctional membranes capable of simultaneously separating oil–water emulsions and removing organic dyes from complex aqueous systems have garnered considerable attention in recent years. However, the facile fabrication of high-performance...
Dye/salt separation has gained increasing attention in recent years, prompting the quest to find cost-effective and environmentally friendly raw materials for synthesizing high performance nanofiltration (NF) membrane for effective dye/salt separatio...
For continuous and efficient oil/water separation and adsorption of dyes, coconut shell powder was grafted onto the surface of quartz sand by dip-coating method to make coconut shell powder-covered quartz sand filter media (CSQS) with superhydrophili...
Mixed matrix membranes have received ever-growing attention due to their high separation performance, taking the advantages of both porous fillers and polymer backbones. However, limitations still exist due to the instability of polymers in harsh env...
To efficiently and synchronously separate oil/water mixture and adsorbed dyes, corn-cob-covered quartz sand (CCQS) filter media with underwater superoleophobic qualities and underoil extremely hydrophobic qualities were fabricated by grafting a corn...
Precise separation and antifouling capabilities are critical for the application of membrane separation technology. In this work, we developed a multiplayer layer-by-layer assembly strategy to sequentially deposit tannic acid (TA) and lysozyme (Lys)...
Efficient dye sieving and salt separation can facilitate the recycling of valuable resources in textile wastewater treatment. This study focuses on developing a high-performance nanofiltration membrane (NF) by co-depositing activated polydopamine (O-...
The high-salinity wastewater from the textile industry faces a significant challenge in effectively separating dyes and salts. In this study, a CeZnFe-layered double hydroxide (LDH)-incorporated nanofiltration (LNF) membrane was fabricated using the...
New flexible methylsilsesquioxane (MSQ) aerogels have been facilely prepared by a sol–gel process with methyltrimethoxysilane (MTMS) and dimethyldimethoxysilane (DMDMS) as co-precursors, followed by surface modification and ambient pressure dry...
Fabrication of high-dye/salt-separation-performances and chlorine-resistant nanofiltration (NF) membranes are crucial for dye desalination. In this study, a thin-film composite NF membrane (PES–DPS) was prepared through the interfacial polymeri...
The development of superlyophobic materials in liquid systems, enabling synchronous oil/water separation and dye removal from water, is highly desirable. In this study, we employed a novel superwetting array-like BiOBr nanosheets anchored on waste ro...
Organic solvent nanofiltration (OSN) is a promising technology for solute removal from organic media, yet developing membranes with stable separation performance remains challenging. This study presents a solvent-resistant double-crosslinked nanofilt...
This article describes the random lasing (RL) phenomenon obtained in a dye-doped, polymeric double-phase system composed of PMMA and PVK polymers. It shows how relative concentrations between mentioned macromolecules can influence lasing parameters o...
Metal-phenol coordination is a widely used method to prepare nanofiltration membrane. However, the facile, controllable and scaled fabrication remains a great challenge. Herein, a novel strategy was developed to fabricate a loose nanofiltration membr...
A novel electrophoretic separation technique is presented, where continuous electrophoretic separation is demonstrated using free flowing liquid foams. Continuous foam electrophoresis combines the principle of capillary electrophoresis and interactio...
Membrane separation technology has shown significant potential in the treatment of mixed dye wastewater. In this study, a reduced graphene oxide (AH-rGO) membrane was prepared using an amino-hydrothermal method and applied for the first time in mixed...
This study proposes a novel approach for preparing a laminated carbides and nitrides (MXene) membrane with loose nanochannels by intercalating cellulose nanocrystal (CNC) and cross-linking with glutaraldehyde. The interlayer spacing of the MXene memb...
Bringing sulfonic acid groups into conventional polyethersulfone (PES) materials to prepare PES/sulfonated polyethersulfone (SPES) composite membranes has been shown to markedly enhance the hydrophilicity of the membranes and boost their separation e...
Covalent organic framework (COF) membranes are eminent candidates in filtration and separation applications due to their high porosity, ordered pore size, versatile molecular structure, inherent mechanical properties, and excellent stability. However...
Micellar-enhanced ultrafiltration (MEUF) is one of several membrane methods used for the removal of trace organic pollutants from aqueous streams. In this process, a surfactant is added to a polluted aqueous solution at a concentration higher than it...
Many reasons have caused a worldwide water stress problem. Thus, the recycling of wastewater streams has been extensively studied. In this work, eco-friendly mixed matrix membranes (MMMs) were fabricated, characterized, and tested for the removal of...
Multifunctional membrane technology has gained tremendous attention in wastewater treatment, including oil/water separation and photocatalytic activity. In the present study, a multifunctional composite nanofiber membrane is capable of removing dyes...
We fabricated a nanofiltration membrane consisting of a polyaniline (PANI) film on a polyphenylsulfone (PPSU) substrate membrane. The PANI film acted as a potent separation enhancer and antimicrobial coating. The membrane was analyzed via scanning el...
This study investigates the optimization of fabrication and operating parameters for poly(ether sulfone) (PES) ultrafiltration membranes embedded with Bismuth tungstate and multi-walled carbon nanotubes (MWCNTs) Bi2WO6/MWCNTs for the removal of dye p...
At present, the types of pollutants in wastewater are more and more complicated, however, the multifunctional membrane materials are in short supply. To prepare a membrane with both high efficient oil-in-water emulsion separation performance and phot...
The effective separation of dyes and inorganic salts is highly desirable for recycling inorganic salts and water resource in printing and dyeing wastewater treatment. In this work, tannic acid (TA) and polyethyleneimine (PEI) were grafted on the PES/...
The efficient removal of dyes and separation from dissolved salts are crucial for the recovery of valuable resources from saline textile wastewater. In this study, hollow fiber membranes were fabricated using the non-solvent-induced phase separation...
The widely used dyes in the pharmaceutical, chemical, and medical industries have brought about an intensive concern for the sustainable development of the environment. Membrane separation offers a versatile method for classified recycling and the re...
Dye-sensitized solar cells (DSSCs) represent a promising low-cost photovoltaic technology with relatively high conversion efficiency and a simple fabrication process. Natural dyes have drawn growing interest compared to ruthenium-based dyes since the...
Tight ultrafiltration (TUF) membranes with high performance have attracted more and more attention in the separation of organic molecules. To improve membrane performance, some methods such as interface polymerization have been applied. However, thes...
Herein, some novel metal-free 1,3,4-oxadiazole compounds O1–O7 were evaluated for their photovoltaic properties using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations to determine if they can se...
High permeance combined with high salt/dye separation efficiency is a prerequisite for achieving zero-liquid-discharge treatment of saline textile wastewater by membrane technology. Thin-film nanocomposite (TFN) membranes incorporating porous nanopar...
The adsorptive removal of dyes from industrial wastewater using commercially available adsorbents is not significantly efficient. Metal–organic frameworks (MOFs) offer outstanding properties which can boost the separation performance over current com...
Organic dyes are critical components in industries ranging from textiles, plastics, and paper to food, cosmetics, and pharmaceuticals. However, their widespread use leads to significant environmental pollution. Consequently, developing efficient meth...
Superior selective adsorption of organic dye is still a big challenge in the process of dye wastewater treatment. Meanwhile, low-price and environmentally friendly biomass-based adsorbents show huge potential in the fields of separation and purificat...
Since anionic dyes and surfactants abundantly exist in oily wastewater, both the separation of oil/water mixture and removal of low-molecular-weight pollutants are important to realize the advanced purification of water. By grafting poly(2-dimethylam...
Developing high−efficiency membrane materials for the rapid removal of organic dyes is crucial but remains a challenge. Polyoxometalates (POMs) clusters with anionic structures are promising candidates for the removal of cationic dyes via elect...
The dye regeneration in dye-sensitized solar cells (DSSCs) is improved by optimizing the charge separation at the level of the sensitized semiconductor treatment of the mesoporous electrode by TiCl4 that passivates the surface for back electron trans...
The contamination of organic dye molecules in aquatic environments caused by the effluents released from vast industrial establishments has been a matter of serious concern in recent years, owing to their strong non-biodegradable nature and acute tox...
Microplastic pollution has become a global environmental problem. Textile microplastics are an important component of microplastic pollution, but little is known about their contamination in the industrial environment. The lack of standardized method...
This review provides an overview of the fabrication methods for Ti3C2Tx MXene-based hybrid photocatalysts and evaluates their role in degrading organic dye pollutants. Ti3C2Tx MXene has emerged as a promising material for hybrid photocatalysts due to...
Hydrophobic nanofiber membranes derived from the biopolymer alginate were fabricated by electrospinning followed by metal ion crosslinking, and their potential as oil-water separation membranes was primarily investigated. Sodium alginate (SA) was co-...
Transforming agricultural residues into functional porous materials provides a sustainable strategy for wastewater remediation. Herein, cellulose was separated from cotton stalks via formic acid-assisted hemicellulose extraction and sodium chlorite d...
In this work, a metal–organic framework (MOF), copper benzene dicarboxylate (Cu-MOF), was tested for the adsorptive recovery of organic dyes (Sunset Yellow FCF, Tartrazine, Orange II, and Methyl Orange) from aqueous solutions. Studies were also...
Photoinduced charge separation (PCS) plays an essential role in various solar energy conversions such as photovoltaic conversion in solar cells. Usually, PCS in solar cells occurs stepwise via solar energy absorption by light absorbers (dyes, inorgan...
Photocatalysis driven by natural sunlight is an attractive approach to removing pollutants from wastewater. Although TiO2–based photocatalysts using various support nano-materials with high catalytic activity and reusability have been developed...
Free-standing copper oxide (Cu2O)-copper hydroxide (Cu(OH)2) nanocomposites with enhanced catalytic and antibacterial functionalities were synthesized on copper mesh using a green method based on spinach leaf extract and glycerol. EDX, SEM, and TEM a...
of 17