Skip to Content
You are currently on the new version of our website. Access the old version .

5,262 Results Found

  • Article
  • Open Access
15 Citations
2,593 Views
11 Pages

18 February 2022

The influence of alloying element Mg on Na and Sr modifying Al-7Si hypoeutectic alloys was investigated. The residual content of Na and the morphology of modified eutectic silicon were characterized. It was found that the alloying element Mg had an e...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Review
  • Open Access
19 Citations
3,834 Views
15 Pages

Research Progress on the Anti-Disproportionation of the ZrCo Alloy by Element Substitution

  • Mingde Wu,
  • Jingchuan Wang,
  • Peilong Li,
  • Cun Hu and ,
  • Xiaofeng Tian and
  • Jiangfeng Song
  • + 1 author+ 0 author

8 September 2020

Hydrogen-induced disproportionation (HID) during the cycles of absorption and desorption leads to a serious decline in the storage capacity of the ZrCo alloy, which has been recognized as the biggest obstacle to its application. Therefore, the prereq...

  • Article
  • Open Access
1 Citations
2,299 Views
15 Pages

18 November 2021

The tensile properties and superplasticity of a forged SP700 alloy with slow eutectoid element (1.5%Cr) addition were investigated in the present paper. The results of the microstructures showed that slow eutectoid element Cr has a significant influe...

(This article belongs to the Special Issue Research Progress in the Microstructure and Mechanical Properties of Light Alloys)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,194 Views
11 Pages

Microstructural Evolution and Element Partitioning in the Phase Transformation of Ti-17 Alloy under Continuous Heating and Cooling Conditions

  • Xudong An,
  • Xin Cai,
  • Mingpan Wan,
  • Min Lei and ,
  • Chaowen Huang,
  • Fei Zhao and
  • Fang Huang
  • + 2 authors+ 0 author

5 August 2020

The microstructural evolution and alloying element partitioning in the α + β ↔ β phase transformation of Ti-17 alloy were explored under continuous heating and cooling conditions using the dilatometric method. Scanning electron m...

  • Communication
  • Open Access
2,091 Views
10 Pages

Microstructure Dependence of Magnetic Properties for Al1.5Fe3Co3Cr1 Multi-Principal-Element Alloy

  • Shaoheng Sun,
  • Yaxia Qiao,
  • Hao Zhang,
  • Dejun Tu and ,
  • Guojun Wang,
  • Zhenhua Wang and
  • Qing Wang
  • + 2 authors+ 0 author

21 May 2024

This study focuses on the microstructures and soft-magnetic properties of the Al1.5Fe3Co3Cr1 multi-principal-element alloy (MPEA) in different states. The MPEA was prepared using arc melting and suction-casting, followed by various heat treatments. T...

  • Article
  • Open Access
23 Citations
2,379 Views
13 Pages

28 February 2022

The main aim of this paper was to develop an advanced processing method for analyzing of anisotropic thermoelastic metal and alloy discs with holes. In the boundary element method (BEM), the heat impact is expressed as an additional volume integral i...

(This article belongs to the Special Issue Advanced Processing Methods for Metals and Their Alloys)
  • Feature Paper
  • Article
  • Open Access
11 Citations
4,307 Views
17 Pages

Structure Zone Investigation of Multiple Principle Element Alloy Thin Films as Optimization for Nanoindentation Measurements

  • Alan Savan,
  • Timo Allermann,
  • Xiao Wang,
  • Dario Grochla and ,
  • Lars Banko,
  • Yordan Kalchev,
  • Aleksander Kostka,
  • Janine Pfetzing-Micklich and
  • Alfred Ludwig
  • + 4 authors+ 0 author

2 May 2020

Multiple principal element alloys, also often referred to as compositionally complex alloys or high entropy alloys, present extreme challenges to characterize. They show a vast, multidimensional composition space that merits detailed investigation an...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
9 Citations
3,253 Views
15 Pages

30 September 2020

The fundamental challenge for creating the crystal structure model used in a multi-principle element design is the ideal combination of atom components, structural stability, and deformation behavior. However, most of the multi-principle element allo...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
25 Citations
4,631 Views
16 Pages

Influence of Rare Earth Element (Y) on Microstructure and Corrosion Behavior of Hot Extrusion AZ91 Magnesium Alloy

  • Yanan Cui,
  • Yonghai Wang,
  • Zhongyu Cui,
  • Wenlong Qi and ,
  • Jidong Wang,
  • Pengfei Ju,
  • Yang Zhao,
  • Bin Liu,
  • Tao Zhang and
  • Fuhui Wang
  • + 5 authors+ 0 author

18 August 2020

The influence of rare earth element (RE) Y on the microstructure and corrosion behavior of extruded AZ91 Mg alloy was surveyed via morphology characterization and corrosion performance measurements. The results indicate the corrosion resistance of th...

  • Article
  • Open Access
12 Citations
3,586 Views
18 Pages

Role of Cr Element in Highly Dense Passivation of Fe-Based Amorphous Alloy

  • Ziqi Song,
  • Zhaoxuan Wang,
  • Qi Chen,
  • Zhigang Qi and ,
  • Ki Buem Kim and
  • Weimin Wang
  • + 1 author+ 0 author

10 October 2023

The effect of the Cr element on the corrosion behavior of as-spun Fe72−xCrxB19.2Si4.8Nb4 ribbons with x = 0, 7.2, 21.6, and 36 in 3.5% NaCl solution were investigated in this work. The results show that the glass formability of the alloys can b...

(This article belongs to the Topic Alloys and Composites Corrosion and Mechanical Properties)
  • Article
  • Open Access
14 Citations
3,686 Views
16 Pages

29 July 2024

In this study, the crystal plasticity finite element method was established by coupling the crystal plasticity and finite element method (FEM). The effect of rolling deformation and slip system of polycrystalline Al-Mg-Si aluminum alloy was investiga...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
10 Citations
2,867 Views
17 Pages

Deformation Rate and Temperature Sensitivity in TWIP/TRIP VCrFeCoNi Multi-Principal Element Alloy

  • Omar El Batal,
  • Wael Abuzaid,
  • Mehmet Egilmez,
  • Maen Alkhader and ,
  • Luca Patriarca and
  • Riccardo Casati
  • + 1 author+ 0 author

13 September 2022

High-entropy alloys (HEAs) and medium-entropy alloys (MEAs), also sometimes referred to as multi-principal element alloys (MPEAs), present opportunities to develop new materials with outstanding mechanical properties. Through the careful selection of...

(This article belongs to the Special Issue Design and Mechanical Behavior of Martensitic Alloys)
  • Article
  • Open Access
6 Citations
4,259 Views
13 Pages

Crystal Plasticity Finite Element Modeling on High Temperature Low Cycle Fatigue of Ti2AlNb Alloy

  • Yanju Wang,
  • Zhao Zhang,
  • Xinhao Wang,
  • Yanfeng Yang and ,
  • Xiang Lan and
  • Heng Li
  • + 1 author+ 0 author

4 January 2023

Ti2AlNb alloy is a three-phase alloy, which consists of O phase, β phase and α2 phase. Because of the difference in the mechanical characteristics between phases, Ti2AlNb alloy often exhibits deformation heterogeneity. Based on EBSD images...

(This article belongs to the Special Issue Advanced Structure Materials and Processing)
  • Feature Paper
  • Article
  • Open Access
131 Citations
7,695 Views
14 Pages

TiVZrNb Multi-Principal-Element Alloy: Synthesis Optimization, Structural, and Hydrogen Sorption Properties

  • Jorge Montero,
  • Claudia Zlotea,
  • Gustav Ek,
  • Jean-Claude Crivello and ,
  • Lætitia Laversenne and
  • Martin Sahlberg
  • + 1 author+ 0 author

31 July 2019

While the overwhelming number of papers on multi-principal-element alloys (MPEAs) focus on the mechanical and microstructural properties, there has been growing interest in these alloys as solid-state hydrogen stores. We report here the synthesis opt...

(This article belongs to the Special Issue Advances in Hydrogen Storage Materials for Energy Utilization)
  • Article
  • Open Access
16 Citations
8,859 Views
18 Pages

23 March 2022

Prestressing of concrete structures using Fe-based shape memory alloys has been investigated extensively by experiments in the last decade. However, detailed investigations on the stress produced by the Fe-based shape memory alloys and its influence...

(This article belongs to the Topic Advances on Structural Engineering)
  • Article
  • Open Access
5 Citations
2,296 Views
17 Pages

Influence of Al and Ti Alloying and Annealing on the Microstructure and Compressive Properties of Cr-Fe-Ni Multi-Principal Element Alloy

  • Keyan An,
  • Tailin Yang,
  • Junjie Feng,
  • Honglian Deng and ,
  • Xiang Zhang,
  • Zeyu Zhao,
  • Qingkun Meng,
  • Jiqiu Qi,
  • Fuxiang Wei and
  • Yanwei Sui
  • + 5 authors+ 0 author

26 October 2024

This study meticulously examines the influence of aluminum (Al) and titanium (Ti) on the genesis of self-generated ordered phases in high-entropy alloys (HEAs), a class of materials that has garnered considerable attention due to their exceptional mu...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
4 Citations
3,624 Views
16 Pages

29 February 2024

Nanoporous structures with 3D interconnected networks are traditionally made by dealloying a binary precursor. Certain approaches for fabricating these materials have been applied to refractory multi-principal element alloys (RMPEAs), which can be su...

  • Article
  • Open Access
2 Citations
2,506 Views
22 Pages

Microstructure and Properties of Resistance Element Welded Joints of DP780 Steel and 6061 Aluminum Alloy

  • Qinglong Wu,
  • Yue Yang,
  • Yingzhe Li,
  • Qing Guo and ,
  • Shuyue Luo and
  • Zhen Luo
  • + 1 author+ 0 author

5 March 2025

This study developed a metallurgical and mechanical hybrid resistance element welding (REW) method to fabricate lightweight Al/steel joints between 2.0 mm 6061 aluminum alloy and 1.2 mm DP780 steel, addressing critical challenges of interfacial inter...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
875 Views
22 Pages

21 February 2026

Aluminum alloy tube–concrete composite columns have received increasing attention owing to their high strength-to-weight ratio and superior corrosion resistance compared with conventional steel–concrete composite columns. In this study, a...

(This article belongs to the Special Issue Advanced Green and Intelligent Building Materials)
  • Article
  • Open Access
18 Citations
5,914 Views
14 Pages

14 June 2024

The emergence of biodegradable stents addresses the limitations of the long-term presence of permanent bare metal stents in the human body. Following implantation, these stents can significantly reduce the occurrence of chronic complications such as...

(This article belongs to the Special Issue Modeling, Simulation and Experimental Studies in Metal Forming)
  • Article
  • Open Access
4 Citations
2,490 Views
21 Pages

23 April 2025

The WE43 magnesium alloy has gained attention in orthopedic implants due to its biodegradable properties, particularly for fabricating degradable fasteners. However, research on its hot-forming processes remains limited, primarily focusing on macrosc...

(This article belongs to the Special Issue Modeling, Simulation and Experimental Studies in Metal Forming)
  • Article
  • Open Access
3 Citations
781 Views
19 Pages

The Role of Element Segregation in the Fracture Mechanism and Performance of Spot-Welded AlSi7MnMg Aluminum Alloy Joints

  • Hong Xu,
  • Miao Zhao,
  • Rui Wang,
  • Lijun Han and ,
  • Xiuming Cheng and
  • You Fang
  • + 1 author+ 0 author

14 February 2026

This study systematically investigates the microstructural characteristics and mechanical properties of resistance spot-welded joints in 3 mm thick non-heat-treatable die-cast AlSi7MnMg alloy, with particular focus on the influence of element segrega...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
520 Views
17 Pages

12 June 2026

Scandium (Sc) is well recognized as a potent grain refiner, yet optimizing its addition amount in the Al-Cu-Mg-Ni-Fe (A242) system remains a longstanding challenge, critically important for material performance in high-temperature automotive and aero...

(This article belongs to the Special Issue State of the Art of Crystalline Metals and Alloys)
  • Article
  • Open Access
1 Citations
1,460 Views
16 Pages

Finite Element Analysis for Restraint Intensity and Welding Residual Stress of the Lehigh Specimen Made of Ti80 Alloy

  • Liang Zhang,
  • Gang Song,
  • Qi Wang,
  • Dongjie Chen and ,
  • Xiaolei Guo,
  • Chang Dai and
  • Weixin Bu
  • + 2 authors+ 0 author

13 September 2025

Ti80 alloy is one of the most commonly used marine titanium alloys but faces cold cracking risks in thick plate welding. Understanding the relationship between restraint intensity and welding residual stress is critical for industrial applications. T...

(This article belongs to the Special Issue Advances in Welding Processes of Metallic Materials—2nd Edition)
  • Article
  • Open Access
45 Citations
4,400 Views
25 Pages

3 December 2020

Shape memory alloys (SMAs) have been widely used in civil engineering applications including active and passive control of structures, sensors and actuators and strengthening of reinforced concrete (RC) structures owing to unique features such as the...

(This article belongs to the Special Issue Shape Memory Alloys (SMAs) for Engineering Applications)
  • Article
  • Open Access
6 Citations
2,415 Views
11 Pages

25 October 2022

The high uniform magnetic field combined with pre-deformation and vacuum heat treatment processing is designed for improving the diffusion bonding properties of the 1420 Al-Li alloy. Serial magneto-thermal coupling treatment experiments of 1420 Al-Li...

(This article belongs to the Special Issue Advances in Laminated Metallic Composites)
  • Article
  • Open Access
1 Citations
1,650 Views
25 Pages

31 October 2025

Three-piece alloy wheels are widely used across the automotive industry, favoured due to their lightweight construction and ease of customisation. Vehicle wheels must withstand forces generated during acceleration, braking, cornering, and impacts, en...

  • Article
  • Open Access
6 Citations
2,648 Views
16 Pages

14 June 2024

Multi-principal element alloys (MPEAs) are at the forefront of materials science due to their large variety of compositions, which can yield unexplored properties. Mapping the structure and properties of a compositional MPEA library in a reasonable t...

(This article belongs to the Section Crystallography and Applications of Metallic Materials)
  • Article
  • Open Access
6 Citations
3,009 Views
15 Pages

The Effect of CRITSIMA Process Parameters on the Microstructure Evolution and Element Segregation of Semi-Solid CuSn10P1 Alloy Billet

  • Xiongchao Zhang,
  • Lei Chen,
  • Han Xiao,
  • Yuhang Zhou and ,
  • Hao Chen and
  • Zhike Duan
  • + 1 author+ 0 author

14 March 2022

In this paper, based on the as-cast CuSn10P1 alloy. Semi-solid CuSn10P1 alloy billet was prepared by cold-rolled isothermal treatment strain-induced melting activation (CRITSIMA). The effects of cold-rolling reduction, isothermal temperature, and iso...

(This article belongs to the Special Issue Advances in Semi-solid Forming)
  • Article
  • Open Access
2 Citations
2,158 Views
15 Pages

2 August 2024

This study investigated the influence of corrosion-induced deterioration of the tensile properties of a Mg-1 wt.% Ca alloy on the performance of a coronary artery stent model fabricated using the alloy wire. Finite element analysis was used to determ...

(This article belongs to the Special Issue Deformation of Metals and Alloys: Theory, Simulations and Experiments)
  • Article
  • Open Access
13 Citations
5,736 Views
30 Pages

Finite Element Analysis for the Self-Loosening Behavior of the Bolted Joint with a Superelastic Shape Memory Alloy

  • Xiangjun Jiang,
  • Jin Huang,
  • Yongkun Wang,
  • Baotong Li and ,
  • Jingli Du and
  • Peng Hao
  • + 1 author+ 0 author

2 September 2018

A macroscopic constitutive model is proposed in this research to reproduce the uniaxial transition ratcheting behaviors of the superelastic shape memory alloy (SMA) undergoing cyclic loading, based on the cosine-type phase transition equation with th...

  • Article
  • Open Access
3 Citations
1,990 Views
11 Pages

RETRACTED: Competitive Mechanism of Alloying Elements on the Physical Properties of Al10Ti15Nix1Crx2Cox3 Alloys through Single-Element and Multi-Element Analysis Methods

  • Yu Liu,
  • Lijun Wang,
  • Juangang Zhao,
  • Zhipeng Wang and ,
  • Ruizhi Zhang,
  • Yuanzhi Wu,
  • Touwen Fan and
  • Pingying Tang
  • + 3 authors+ 0 author

Altering the content of an alloying element in alloy materials will inevitably affect the content of other elements, while the effect is frequently disregarded, leading to subsequent negligence of the common influence on the physical properties of al...

(This article belongs to the Special Issue Microstructure, Mechanical and Tribological Properties of Alloys)
  • Article
  • Open Access
1 Citations
2,653 Views
19 Pages

1 April 2021

Multiroute yield experiments were carried out on extruded ZK60 magnesium alloy samples under 200 °C and strain rate of 10−2 s−1 by a thermomechanical simulator. A hypoelastoplastic large deformation constitutive relationship was employed to simulate...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
1,903 Views
15 Pages

Finite Element Simulation of Crystal Plasticity in the Tensile Fracture Behavior of PBF-LB/M CoCrFeNiMn High Entropy Alloy

  • Liangliang Wu,
  • Wei Duan,
  • Shuaifeng Zhang,
  • Xiao Yang and ,
  • Wen Li,
  • Xu Shen,
  • Yan Zhang and
  • Jianxin Zhou
  • + 3 authors+ 0 author

7 September 2025

CoCrFeNiMn high entropy alloy (HEA) fabricated via laser-based powder bed fusion (PBF-LB/M) exhibits exceptional mechanical properties, including high strength, better ductility than titanium alloy, and superior corrosion resistance. This study simul...

  • Article
  • Open Access
8 Citations
5,681 Views
16 Pages

8 May 2023

Hollow tubes are generally manufactured using porthole die extrusion. A finite element software QForm is used to analyze the material flow of aluminum alloy A6061 tubes inside a specially designed porthole die during tube extrusion. High welding pres...

(This article belongs to the Special Issue Sheet Metal Forming)
  • Article
  • Open Access
12 Citations
2,587 Views
19 Pages

24 January 2023

Ti containing Cu-based (TC) alloy reinforced glass-ceramic bond was fabricated for cubic boron nitride (CBN) abrasive tool materials, and its crystal composition, phase transformation, sintering activation energy, microstructure, element diffusion ma...

(This article belongs to the Special Issue Micro- and Nanoscale Science, Technology and Engineering in Nanjing University of Aeronautics and Astronautics: Celebrating 70th Anniversary)
  • Article
  • Open Access
7 Citations
2,428 Views
21 Pages

High-Throughput Preparation and Characterization of ZrMoTaW Refractory Multi-Principal Element Alloy Film

  • Qiannan Wang,
  • Hongwang Yang,
  • Xiaojiao Zuo,
  • Yinxiao Wang and
  • Jiahao Yao

30 November 2022

In this work, high-throughput screening technology is applied to four-member refractory multi-principal element alloys (RMPEAs) films with high W content. The exploration of refractory metals such as W is strictly limited by the high melting temperat...

  • Article
  • Open Access
5 Citations
3,600 Views
14 Pages

1 November 2018

A coupled macro-meso-scale numerical simulation is applied to investigate the friction effect on texture evolution during uniaxial compression of NiTi shape memory alloy at 400 °C. In this approach, macroscale finite element simulations in consid...

  • Article
  • Open Access
5 Citations
2,894 Views
14 Pages

9 May 2024

This work demonstrates the capabilities and advantages of a novel sintering technique to fabricate bulk composition gradient materials. Pressure distribution calculations were used to compare several tooling geometries for use with current-activated,...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
3 Citations
2,480 Views
14 Pages

16 August 2023

In this study, the constitutive equation of the high-strength Mg-Gd-Y-Zn-Zr alloy sheet was established by tensile tests at different temperatures and different tensile rates. The U-shape bending forming process of the sheet was simulated under diffe...

(This article belongs to the Special Issue Metal Plastic Deformation and Forming)
  • Article
  • Open Access
20 Citations
6,647 Views
12 Pages

On the Sustainable Choice of Alloying Elements for Strength of Aluminum-Based Alloys

  • Anders E.W. Jarfors,
  • Andong Du,
  • Gegan Yu,
  • Jinchuan Zheng and
  • Kaikun Wang

2 February 2020

Aluminum alloys are today entirely recyclable and are seen as a sustainable material. However, there are limitations in the use of aluminum from material strength and cost perspective. Nickel, copper and rare earth metals are alloying elements that m...

  • Article
  • Open Access
232 Views
20 Pages

Finite Element Study of Shape Memory Alloy Butterfly Spring Tie Beam Joints in Double-Column Piers

  • Zhaolan Wei,
  • Ziteng Ma,
  • Jiangchuan Zhang,
  • Shaomin Jia and ,
  • Hang Zhou,
  • Yuzhi Huang and
  • Yulin Feng
  • + 2 authors+ 0 author

16 September 2026

This paper proposes a repair-oriented steel tie beam joint with shape memory alloy (SMA) butterfly springs for double-column piers. In the proposed detail, the conventional welded connection is replaced by a bolted fuse region to redirect inelastic d...

(This article belongs to the Section Building Structures)
  • Feature Paper
  • Article
  • Open Access
5 Citations
2,489 Views
22 Pages

Influence of Degree of Severe Plastic Deformation on Thermal Stability of an HfNbTiZr Multi-Principal Element Alloy Processed by High-Pressure Torsion

  • Pham Tran Hung,
  • Megumi Kawasaki,
  • Ábel Szabó,
  • János L. Lábár and ,
  • Zoltán Hegedűs and
  • Jenő Gubicza
  • + 1 author+ 0 author

27 September 2022

Severe plastic deformation (SPD) is an effective route for the nanocrystallization of multi-principal element alloys (MPEAs). The stability of the refined microstructure is important, considering the high temperature applications of these materials....

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
7 Citations
4,474 Views
27 Pages

Al-Cu-Mg Alloy Powder Reinforced with Graphene Nanoplatelets: Morphology, Flowability and Discrete Element Simulation

  • Mulla Ahmet Pekok,
  • Rossitza Setchi,
  • Michael Ryan,
  • Heng Gu and ,
  • Quanquan Han and
  • Dongdong Gu
  • + 1 author+ 0 author

Research in metal matrix composites (MMCs) indicates that superior mechanical properties may be achieved by embedding reinforcement materials. However, the development of new composite powder for additive manufacturing requires an in-depth understand...

(This article belongs to the Special Issue Progress in Powder-Based Additive Manufacturing)
  • Article
  • Open Access
3 Citations
1,823 Views
18 Pages

18 October 2024

Multi-principal-element alloys (MPEAs) exhibit superior strength and good ductility. However, tribological properties of FeCrNi MPEAs remain unknown at nanoscale and complex environments. Here, we investigate the effects of scratching speed, depth, a...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
5 Citations
3,695 Views
14 Pages

Mechanism of Aluminum Element Segregation in As-Cast Medium-Entropy Alloy CrCoNiAl0.014: A Hybrid MD/MC Simulation and Experimental Study

  • Baoshuai Xue,
  • Zhongxue Feng,
  • Jinliang Chen,
  • Chao Zhang and ,
  • Tongman Li,
  • Jun Tan,
  • Caiju Li and
  • Jianhong Yi
  • + 3 authors+ 0 author

6 February 2023

Element segregation in the as-cast medium-entropy alloy (MEA), CrCoNiAl0.014, has a significant influence on its mechanical properties. This study focused on aluminum segregation in the as-cast CrCoNiAl0.014 MEA at room temperature (300 K). The eleme...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
2 Citations
1,498 Views
26 Pages

Ultra-High Strength and Specific Strength in Ti61Al16Cr10Nb8V5 Multi-Principal Element Alloy: Quasi-Static and Dynamic Deformation and Fracture Mechanisms

  • Yang-Yu He,
  • Zhao-Hui Zhang,
  • Yi-Fan Liu,
  • Yi-Chen Cheng and ,
  • Xiao-Tong Jia,
  • Qiang Wang,
  • Jin-Zhao Zhou and
  • Xing-Wang Cheng
  • + 3 authors+ 0 author

10 July 2025

This study investigates the deformation and fracture mechanisms of a Ti61Al16Cr10Nb8V5 multi-principal element alloy (Ti61V5 alloy) under quasi-static and dynamic compression. The alloy comprises an equiaxed BCC matrix (~35 μm) with uniformly disp...

(This article belongs to the Special Issue Fatigue, Damage and Fracture of Alloys)
  • Article
  • Open Access
8 Citations
4,889 Views
18 Pages

6 December 2023

An alloy wheel is generally a symmetrically shaped part integral to a vehicle because its weight and strength can improve driving performance. Therefore, alloy wheel design is essential, and a novel design method should be considered. Currently, the...

(This article belongs to the Special Issue Applied Mechanics, Engineering and Modeling - Volume II)
  • Article
  • Open Access
25 Citations
3,304 Views
10 Pages

Combustion Mechanism of Alloying Elements Cr in Ti-Cr-V Alloys

  • Lei Shao,
  • Yayu Wang,
  • Guoliang Xie,
  • Hongying Li and ,
  • Jiashuai Xiong,
  • Jiabin Yu,
  • Guangyu He and
  • Jinfeng Huang
  • + 3 authors+ 0 author

30 September 2019

The combustion velocity and the mechanism for a series of Ti-Cr-V alloys with different chemical compositions are studied by a promoted ignition combustion test corresponding to different oxygen pressures to investigate the influence of alloying elem...

  • Article
  • Open Access
7 Citations
2,752 Views
15 Pages

Efficient Design of Broadband and Low-Profile Multilayer Absorbing Materials on Cobalt–Iron Magnetic Alloy Doped with Rare Earth Element

  • Sixing Liu,
  • Yilin Zhang,
  • Hao Wang,
  • Fan Wu and ,
  • Shifei Tao and
  • Yujing Zhang
  • + 1 author+ 0 author

27 June 2024

Magnetic metal absorbing materials have exhibited excellent absorptance performance. However, their applications are still limited in terms of light weight, low thickness and wide absorption bandwidth. To address this challenge, we design a broadband...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)

of 106