Skip to Content

881 Results Found

  • Article
  • Open Access
25 Citations
4,551 Views
13 Pages

Effect of TiC Particles on the Properties of Copper Matrix Composites

  • Zhenjie Zhai,
  • Haitao Dong,
  • Denghui Li,
  • Zhe Wang and ,
  • Changfei Sun and
  • Cong Chen
  • + 1 author+ 0 author

In this study, TiC particle-reinforced Cu-based composites were prepared by powder metallurgy and spark plasma sintering (SPS) techniques. The mechanical and electrical properties of TiC/Cu composites were analyzed in conjunction with micro-morpholog...

  • Article
  • Open Access
10 Citations
2,915 Views
10 Pages

10 January 2023

In this work, composites based on AA5049 aluminium alloy reinforced with multiwalled carbon nanotubes (CNTs) and multiwalled TiC-coated CNTs were prepared by powder metallurgy. For the first time, the effect of TiC coating on the CNT surface on the f...

(This article belongs to the Special Issue Ceramic Coatings for High-Temperature Applications)
  • Feature Paper
  • Article
  • Open Access
19 Citations
6,121 Views
18 Pages

24 May 2018

In-situ TiB/TiC particle-reinforced titanium matrix composites (TMCs) based on a near-β Ti-5Al-5Mo-5V-3Cr alloy (Ti-5553) were synthesized by solid-state reaction with B4C and graphite particles during spark plasma sintering (SPS). In this study...

(This article belongs to the Special Issue Spark Plasma Sintering-A Key Technology towards the Development of New Materials)
  • Article
  • Open Access
43 Citations
5,356 Views
18 Pages

Tribological Behaviour of Al-2024/TiC Metal Matrix Composites

  • Egberto Bedolla-Becerril,
  • Josefina Garcia-Guerra,
  • Víctor H. Lopez-Morelos,
  • Marco A. Garcia-Renteria and ,
  • Lazaro A. Falcon-Franco,
  • Víctor H. Martinez-Landeros,
  • Sergio García-Villarreal and
  • Sergio E. Flores-Villaseñor
  • + 3 authors+ 0 author

31 December 2022

Pin-on-disk tests were performed to evaluate the wear behaviour of a 2024 aluminium alloy metal matrix composite (MMC) reinforced with 52 vol.% of TiC particles (Al-2024/TiC) in a fabricated and thermal-treated (T6) condition. The MMC was produced vi...

(This article belongs to the Special Issue Surface Engineering, Coatings and Tribology)
  • Article
  • Open Access
22 Citations
5,152 Views
9 Pages

Microstructure Evolution of TiC Particles In Situ, Synthesized by Laser Cladding

  • Yanhui Liu,
  • Jieqiong Ding,
  • Weicheng Qu,
  • Yu Su and
  • Zhishui Yu

11 March 2017

In this paper, a TiC reinforcement metal matrix composite coating is produced using nickel and graphite mixing powder on the surface ofTi-6Al-4V alloy by laser radiation. The microstructure of the coatings is investigated by XRD, SEM and EDS. Results...

  • Article
  • Open Access
27 Citations
4,487 Views
16 Pages

Tribological Behavior of TiC Particles Reinforced 316Lss Composite Fabricated Using Selective Laser Melting

  • Jing Li,
  • Zhanyong Zhao,
  • Peikang Bai,
  • Hongqiao Qu and ,
  • Minjie Liang,
  • Haihong Liao,
  • Liyun Wu and
  • Pengchen Huo
  • + 3 authors+ 0 author

21 March 2019

In order to improve the abrasion performance of 316Lss, make full use of its advantages and broaden its application fields, the tribological behavior of the TiC particles reinforced 316Lss composites—which were manufactured by selective laser m...

  • Article
  • Open Access
1,128 Views
14 Pages

25 December 2025

Enhancing the local mechanical response of low-carbon cast steels remains essential for improving their performance in wear-intensive environments. In this work, a low-carbon cast steel was locally modified through the in situ formation of TiC partic...

(This article belongs to the Section Metal Matrix Composites)
  • Feature Paper
  • Article
  • Open Access
27 Citations
4,614 Views
14 Pages

23 April 2021

Titanium and its alloys exhibit superior properties of high corrosion resistance, an excellent strength to weight ratio and outstanding stiffness among other things. However, their relatively low hardness and wear resistance limit their service life...

(This article belongs to the Special Issue Additive Manufacturing Research and Applications)
  • Article
  • Open Access
9 Citations
3,082 Views
13 Pages

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

  • Ni He,
  • Mingjia Li,
  • Guodong Sun,
  • Junjie Xu and ,
  • Mingyang Li,
  • Longlong Dong and
  • Yusheng Zhang
  • + 2 authors+ 0 author

16 May 2023

To overcome the tradeoff between strength and ductility of materials and obtain titanium matrix composites with excellent mechanical properties, in this study, the in situ-synthesized TiC particles and Ti-Al-V-Mo-Cr (Ti1400) alloy-reinforced Ti6Al4V...

(This article belongs to the Special Issue Intermetallic-Based Materials and Composites)
  • Article
  • Open Access
4 Citations
2,741 Views
13 Pages

The Microstructures of TiC–Ti5Si3-Reinforced Cu Matrix Composites Prepared by Ti–SiC Reaction

  • Chaoxian Zhang,
  • Xiao Zhang,
  • Wenzhi Miao,
  • Jiangmin Wu and ,
  • Fugong Qi,
  • Jiyu Zhou and
  • Haimin Ding
  • + 2 authors+ 0 author

17 March 2023

In this work, the TiC and Ti5Si3-reinforced Cu matrix composites with different contents were successfully prepared through Ti–SiC reaction in Cu melts; accordingly, the microstructures of them were studied, and the hardness of the composites w...

(This article belongs to the Special Issue Metal-Ceramic Composites Fabricated by Powder Metallurgy Method)
  • Article
  • Open Access
59 Citations
4,329 Views
20 Pages

8 September 2023

The present investigation highlights the development of high-performance materials in the construction materials industry, with a special focus on the production of aluminium matrix composites (AMCs) containing titanium carbide (TiC) particles. The s...

(This article belongs to the Special Issue Advances in Metal Matrix Composites: Structure, Properties and Applications)
  • Article
  • Open Access
16 Citations
4,588 Views
13 Pages

Microstructures and Compressive Properties of Al Matrix Composites Reinforced with Bimodal Hybrid In-Situ Nano-/Micro-Sized TiC Particles

  • Feng Qiu,
  • Hao-Tian Tong,
  • Yu-Yang Gao,
  • Qian Zou and ,
  • Bai-Xin Dong,
  • Qiang Li,
  • Jian-Ge Chu,
  • Fang Chang,
  • Shi-Li Shu and
  • Qi-Chuan Jiang
  • + 5 authors+ 0 author

25 July 2018

Bimodal hybrid in-situ nano-/micro-size TiC/Al composites were prepared with combustion synthesis of Al-Ti-C system and hot press consolidation. Attempt was made to obtain in-situ bimodal-size TiC particle reinforced dense Al matrix composites by usi...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
8 Citations
3,237 Views
10 Pages

Microstructure and Mechanical Properties of Core-Shell B4C-Reinforced Ti Matrix Composites

  • Ziyang Xiu,
  • Boyu Ju,
  • Junhai Zhan,
  • Ningbo Zhang and ,
  • Pengjun Wang,
  • Keguang Zhao,
  • Mingda Liu,
  • Aiping Yin,
  • Weidi Chen and
  • Wenshu Yang
  • + 10 authors+ 5 authors

30 January 2023

Composite material uses ceramic reinforcement to add to the metal matrix to obtain higher material properties. Structural design is an important direction of composite research. The reinforcement distribution of the core-shell structure has the uniqu...

(This article belongs to the Special Issue Phase and Structure Analysis of Alloys and Metal Matrix Composites)
  • Article
  • Open Access
186 Views
15 Pages

27 October 2026

To meet the demand for lightweight, high-strength, and high-temperature-resistant structural materials in aerospace applications, TC11-(TiB + TiC) composites with varying B4C contents (0, 2 and 5 wt.%) were fabricated by hot isostatic pressing (HIP),...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
23 Citations
3,548 Views
26 Pages

In Situ Fabrication of TiC/Ti–Matrix Composites by Laser Directed Energy Deposition

  • Sabin Mihai,
  • Florin Baciu,
  • Robert Radu,
  • Diana Chioibasu and
  • Andrei C. Popescu

29 August 2024

In this study, crack-free TiC/Ti composites with TiC content ranging from 0 to 15 wt.% were successfully fabricated using Direct Energy Deposition with a dual-feeder system that concomitantly delivered different amounts of both constituents into a hi...

(This article belongs to the Special Issue State of the Art in Materials for Additive Manufacturing)
  • Article
  • Open Access
4 Citations
1,661 Views
13 Pages

18 April 2025

In this paper, the synthesis of TiC-coated carbon fibers (TiC-CFs) with varying thicknesses is achieved through the manipulation of the molten salt reaction, along with the fabrication of TiC-coated carbon fiber-reinforced aluminum matrix (TiC-CF/Al)...

(This article belongs to the Section Metal Matrix Composites)
  • Article
  • Open Access
21 Citations
4,322 Views
12 Pages

Characterization of Iron-Matrix Composites Reinforced by In Situ TiC and Ex Situ WC Fabricated by Casting

  • Aida B. Moreira,
  • Laura M. M. Ribeiro,
  • Pedro Lacerda and
  • Manuel F. Vieira

25 May 2021

In this study, the effect of microstructural characteristics on the mechanical properties of high-chromium white cast iron-matrix composites reinforced by in situ TiC and ex situ WC was investigated. To this end, two different powder mixtures (Ti + A...

  • Article
  • Open Access
14 Citations
3,295 Views
13 Pages

Simulation Study of Ultrasonic Elliptical Vibration Cutting of TiC Particle-Reinforced Titanium Matrix Composites

  • Haixiang Huan,
  • Wenqiang Xu,
  • Biao Zhao,
  • Ke Zhang and ,
  • Jianfei Pu and
  • Chilei Zhu
  • + 1 author+ 0 author

21 October 2022

In order to investigate the characteristics of elliptical ultrasonic vibration cutting of TiC particle-reinforced titanium matrix composites, a two-dimensional thermodynamic coupled finite element cutting model was established based on the Johnson-Co...

(This article belongs to the Special Issue Advanced Metal Cutting Technology and Tools)
  • Article
  • Open Access
12 Citations
2,605 Views
14 Pages

4 December 2024

With the rapid development of the aerospace, automobile, and ocean industries, there is an urgent need for the fabrication of high-performance polymer matrix composites with low friction and wear in wide temperature ranges. In this paper, polytetrafl...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
33 Citations
4,929 Views
16 Pages

Effect of Increasing the Strength of Aluminum Matrix Nanocomposites Reinforced with Microadditions of Multiwalled Carbon Nanotubes Coated with TiC Nanoparticles

  • Artemiy Aborkin,
  • Kirill Khorkov,
  • Evgeny Prusov,
  • Anatoly Ob’edkov and ,
  • Kirill Kremlev,
  • Igor Perezhogin and
  • Michail Alymov
  • + 2 authors+ 0 author

11 November 2019

Aluminum matrix composites reinforced with multiwalled carbon nanotubes (MWCNTs) are promising materials for applications in various high-tech industries. Control over the processes of interfacial interaction in Al/MWCNT composites is important to ac...

  • Article
  • Open Access
26 Citations
4,197 Views
35 Pages

Mechanical Behavior of Titanium Based Metal Matrix Composites Reinforced with TiC or TiB Particles under Quasi-Static and High Strain-Rate Compression

  • Pavlo E. Markovsky,
  • Jacek Janiszewski,
  • Oleksandr O. Stasyuk,
  • Vadim I. Bondarchuk and ,
  • Dmytro G. Savvakin,
  • Kamil Cieplak,
  • Daniel Goran,
  • Purvesh Soni and
  • Sergey V. Prikhodko
  • + 4 authors+ 0 author

12 November 2021

The mechanical behavior of titanium alloys has been mostly studied in quasi-static conditions when the strain rate does not exceed 10 s−1, while the studies performed in dynamic settings specifically for Ti-based composites are limited. Such data are...

(This article belongs to the Special Issue Light Alloys and High-Temperature Alloys)
  • Article
  • Open Access
10 Citations
2,021 Views
18 Pages

Study on the Electrical and Mechanical Properties of TiC Particle-Reinforced Copper Matrix Composites Regulated by Different Rare Earth Elements

  • Denghui Li,
  • Changfei Sun,
  • Zhenjie Zhai,
  • Zhe Wang and ,
  • Cong Chen and
  • Qian Lei
  • + 1 author+ 0 author

9 January 2025

Copper matrix composites (CMCs) synergistically reinforced with rare earth oxides (Re2O3) and TiC were prepared using a powder metallurgy process with vacuum hot-pressing and sintering technology, aiming to explore new ways to optimize the properties...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
10 Citations
2,606 Views
17 Pages

17 November 2024

Titanium-based Metal Matrix Composites (MMCs) manufactured by additive manufacturing offer tremendous lightweighting opportunities. However, processing the high reinforcement contents needed to substantially improve elastic modulus while conserving s...

(This article belongs to the Special Issue Advances in Titanium and Titanium Alloys: Processing, Properties and Additive Manufacturing)
  • Article
  • Open Access
5 Citations
3,067 Views
14 Pages

Al Matrix Composites Reinforced by Ti and C Dedicated to Work at Elevated Temperature

  • Bartosz Hekner,
  • Jerzy Myalski,
  • Patryk Wrześniowski and
  • Tomasz Maciąg

6 June 2021

In this paper, the applicability of aluminium matrix composites to high-temperature working conditions (not exceeding the Al melting point) was evaluated. The behaviour of Al-Ti-C composites at elevated temperatures was described based on microstruct...

  • Article
  • Open Access
2 Citations
3,105 Views
9 Pages

Microstructure and Wear Behavior of TiC/AISI 1020 Metal Matrix Composites Produced by Liquid Pressing Infiltration

  • Heejeong Kim,
  • Jungyu Park,
  • Sangmin Shin,
  • Seungchan Cho and ,
  • Junghwan Kim,
  • Dong-Su Bae and
  • Ilguk Jo
  • + 2 authors+ 0 author

17 October 2021

A metal matrix composite was developed through a unique liquid pressing infiltration process to study the wear mechanism of a TiC reinforced AISI 1020 steel matrix. The microstructure, hardness, and wear behaviors of the TiC/AISI 1020 composite were...

(This article belongs to the Special Issue Metal Alloys: Fusion of the Cutting Edge Research Tools with Conventional Metal Study)
  • Article
  • Open Access
4 Citations
1,868 Views
16 Pages

On the High Elastic Modulus Mechanism of Iron Matrix Composites

  • Hangrui Liu,
  • Qi Zhang,
  • Xing Fang,
  • Xiaoyu Yang and ,
  • Mai Wang,
  • Xiqing Tang,
  • Yanxin Wu and
  • Zhenli Mi
  • + 3 authors+ 0 author

27 January 2025

High modulus steels are characterized by high specific strength and specific stiffness, which can be attributed to the presence of hard reinforced particles. This paper investigates two common iron matrix composites, namely Fe/TiB2 and Fe/TiC, prepar...

(This article belongs to the Special Issue Microstructure and Mechanical Behavior of High-Strength Steel)
  • Article
  • Open Access
22 Citations
4,012 Views
13 Pages

10 September 2022

In this paper, a new hybrid metal matrix composite, named AZ91/(SiC + Ti)p, is presented. The commercial AZ91 magnesium alloy was chosen as the matrix. The composite was reinforced with both SiC and Ti particles. The investigated material was success...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
3 Citations
3,928 Views
9 Pages

8 January 2020

In this work, chemical vapor infiltration (CVI) was combined with reactive melt infiltration (RMI) using Ti–6Al–4V titanium alloy powder to prepare Cf/C–TiC composites. The microstructure and composition of Cf/C–TiC composites...

  • Article
  • Open Access
2,896 Views
16 Pages

18 February 2020

The in situ reaction method for preparing metal matrix composites has the advantages of a simple process, good combination of the reinforcing phase and matrix, etc. Based on the mechanism of forming TiCx particles via the dissolution reaction of soli...

  • Article
  • Open Access
4 Citations
2,864 Views
10 Pages

16 January 2021

In the present paper, new heat treatment was performed on 10 vol.% TiC/Ti-6Al-3Sn-9Zr-1.5Mo composite fabricated by an in situ casting technique. The aim is to obtain fully lamellar structure in matrix, control the lamellar structure quantitatively a...

  • Article
  • Open Access
18 Citations
4,271 Views
13 Pages

17 July 2021

TiC-reinforced metal matrix composites were fabricated by laser cladding and FeCrCoNiAlTiC high entropy alloy powder. The heat of the laser formed a TiC phase, which was consistent with the thermodynamic calculation, and produced a coating layer with...

(This article belongs to the Special Issue Microstructural and Mechanical Properties of Metallic Materials, Volume II)
  • Article
  • Open Access
25 Citations
2,779 Views
11 Pages

12 October 2022

One of the popular techniques to fabricate metal matrix composites is the compo-casting process. The un-uniform spreading of reinforced subdivisions (particles) inside the metallic matrix and the lack of desirable mechanical properties of the final p...

(This article belongs to the Special Issue Feature Papers on "Hybrid and Composite Crystalline Materials" 2021-2022)
  • Article
  • Open Access
23 Citations
4,569 Views
31 Pages

4 September 2020

The application of metal matrix composites (Al-SiC-TiC) in aerospace and defense industries have surged in the areas of hull safety, aviation fins, and closure units. The close to ideal solution for generating powdered mixture availing ball milling,...

  • Article
  • Open Access
10 Citations
5,297 Views
19 Pages

Efficient Pervaporation for Ethanol Dehydration: Ultrasonic Spraying Preparation of Polyvinyl Alcohol (PVA)/Ti3C2Tx Nanosheet Mixed Matrix Membranes

  • Huijuan Tong,
  • Qiao Liu,
  • Nong Xu,
  • Qing Wang and ,
  • Long Fan,
  • Qiang Dong and
  • Aiqin Ding
  • + 2 authors+ 0 author

Polyvinyl alcohol (PVA) pervaporation (PV) membranes have been extensively studied in the field of ethanol dehydration. The incorporation of two-dimensional (2D) nanomaterials into the PVA matrix can greatly improve the hydrophilicity of the PVA poly...

(This article belongs to the Special Issue Zeolitic Membranes for Gas and Liquid Separation: Synthesis and Applications)
  • Article
  • Open Access
4 Citations
2,452 Views
16 Pages

11 July 2023

This study focuses on the synthesis of TiC-TiB2/Fe coatings with varying amounts of aluminum (Al) using tungsten inert gas (TIG) cladding and investigates the impact of Al addition on microstructure refinement and performance enhancement of the coati...

  • Article
  • Open Access
2,508 Views
15 Pages

Enhancement of Corrosion Resistance Properties of Electrodeposited Ni/nano-TiC Composite Layers

  • Nicoleta Bogatu,
  • Lidia Benea,
  • Elena Roxana Axente and
  • Jean Pierre Celis

This paper presents novel results on the effects of the dispersion of titanium carbide nanoparticles (50 nm mean diameter) into a nickel-plating electrolyte on the corrosion behavior of the nanocomposite layers obtained. The Ni/nano-TiC layers are co...

(This article belongs to the Special Issue Recent Advances in Nanomaterials Science)
  • Article
  • Open Access
8 Citations
2,066 Views
19 Pages

Preparation of Aluminum Matrix Composites Reinforced with Hybrid MAX–MXene Particles for Enhancing Mechanical Properties and Tribological Performance

  • Zipeng Li,
  • Qinghua Li,
  • Junda You,
  • Fuguo Li and ,
  • Guo Yu,
  • Wen Zhang and
  • Zikun Liang
  • + 2 authors+ 0 author

10 October 2025

This study presents a novel methodology for the fabrication of aluminum matrix composites (AMCs) reinforced with a hybrid of MAX phase (Ti3AlC2) and MXene (Ti3C2Tx) particles via vacuum hot-pressing sintering, aiming to enhance the mechanical propert...

(This article belongs to the Section Metal Composites)
  • Article
  • Open Access
6 Citations
3,283 Views
12 Pages

Sintering and Mechanical Properties of (SiC + TiCx)p/Fe Composites Synthesized from Ti3AlC2, SiC, and Fe Powders

  • Mingtao Wang,
  • Zecheng Wang,
  • Zhiyue Yang,
  • Jianfeng Jin and ,
  • Guoping Ling and
  • Yaping Zong
  • + 1 author+ 0 author

9 May 2021

Ceramic-particle-reinforced iron matrix composites (CPR-IMCs) have been used in many fields due to their excellent performance. In this study, using the fast resistance-sintering technology developed by our team, iron matrix composites (IMCs) reinfor...

(This article belongs to the Special Issue Applications, Preparation and Characterization of Metal-Ceramic Nanocomposites)
  • Article
  • Open Access
16 Citations
2,832 Views
25 Pages

Effect of the Distribution Characteristics of TiC Phases Particles on the Strengthening in Nickel Matrix

  • Dingfeng Qu,
  • Min Zheng,
  • Zongxiao Zhu,
  • Wenbang Chen and ,
  • Weihua Chen,
  • Tianzuo Shi and
  • Jie Chen
  • + 2 authors+ 0 author

15 February 2023

Molecular dynamics (MD) was used to simulate the effect of TiC particles distribution on the tribological behavior of the reinforced composites. The mechanical properties, friction coefficient, number of wear atoms, stress and temperature, and micros...

  • Article
  • Open Access
7 Citations
3,281 Views
15 Pages

Residual Stress Induced by Addition of Nanosized TiC in Titanium Matrix Composite

  • Hanna Myalska-Głowacka,
  • Bartosz Chmiela,
  • Marcin Godzierz and
  • Maria Sozańska

29 March 2022

A hot pressing process was employed to produce titanium-based composites. Nanosized TiC particles were incorporated in order to improve mechanical properties of the base material. The amount of nanosized additions in the composites was 0.5, 1.0, and...

(This article belongs to the Special Issue Applications, Preparation and Characterization of Metal-Ceramic Nanocomposites)
  • Article
  • Open Access
11 Citations
5,772 Views
18 Pages

16 October 2024

This paper investigated the influence of titanium carbide (TiC) content on the processing, microstructure, mechanical and tribological properties of Inconel 718/TiC composites produced by binder jetting additive manufacturing. It was found that incre...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
5 Citations
2,092 Views
14 Pages

13 October 2023

Although Sn has been intensively studied as one of the most promising anode materials to replace commercialized graphite, its cycling and rate performances are still unsatisfactory owing to the insufficient control of its large volume change during c...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
32 Citations
3,668 Views
15 Pages

Tribological and Thermo-Mechanical Properties of TiO2 Nanodot-Decorated Ti3C2/Epoxy Nanocomposites

  • Yalin Zhang,
  • Xuzhao He,
  • Miao Cao,
  • Xiaojun Shen and ,
  • Yaru Yang,
  • Jie Yi,
  • Jipeng Guan,
  • Jianxiang Shen,
  • Man Xi and
  • Bolin Tang
  • + 6 authors+ 1 author

12 May 2021

The micromorphology of fillers plays an important role in tribological and mechanical properties of polymer matrices. In this work, a TiO2-decorated Ti2C3 (TiO2/Ti3C2) composite particle with unique micro-nano morphology was engineered to improve the...

  • Article
  • Open Access
25 Citations
5,008 Views
13 Pages

The Dry Sliding Wear Properties of Nano-Sized TiCp/Al-Cu Composites at Elevated Temperatures

  • Wei-Si Tian,
  • Qing-Long Zhao,
  • Chuan-Jiang Zhao,
  • Feng Qiu and
  • Qi-Chuan Jiang

11 August 2017

Nano-sized ceramic particle reinforced aluminum composites exhibit excellent room-temperature mechanical properties. However, there is limited research on the dry sliding wear behavior of those composites at elevated temperatures, which should be one...

  • Article
  • Open Access
11 Citations
5,446 Views
9 Pages

3 August 2017

Metal-matrix foams are used widely for structural applications such as impact energy absorption, vibration resistance and weight reduction. In this study titanium nanocomposite foams with different porosity percentages were produced using TiH2, as fo...

(This article belongs to the Special Issue Synthesis and Properties of Bulk Nanostructured Metallic Materials)
  • Article
  • Open Access
2 Citations
1,207 Views
16 Pages

28 August 2025

This study systematically investigates the synergistic corrosion resistance enhancement mechanisms in aluminum matrix composites (AMCs) through the combined implementation of equal channel angular pressing (ECAP) and Ti3C2Tx MXene reinforcement. The...

(This article belongs to the Section Metal Matrix Composites)
  • Article
  • Open Access
7 Citations
1,756 Views
19 Pages

Synthesis and Characterization of Recycled-TiC Reinforced AlZnMgCu Powder Metallurgy Composites

  • Keerthivasan Navaneethakrishnan,
  • Anandakrishnan Veeramani,
  • Bharat Kumar Chigilipalli and
  • Muralimohan Cheepu

28 September 2024

Recycling’s value in conserving scarce resources, avoiding environmental damage to the land, and reducing energy consumption is well known. This research aims to develop a composite that uses recycled reinforcement that was formed through an in...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
2 Citations
1,145 Views
16 Pages

12 January 2026

Al2O3-TiC/6061Al composites were fabricated via in situ powder metallurgy using 6061 Al, TiO2, and graphite powders as starting materials. The effects of sintering temperature and ceramic particle content on the microstructure and mechanical properti...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
23 Citations
7,466 Views
15 Pages

Comparative Life Cycle Assessment and Cost Analysis of the Production of Ti6Al4V-TiC Metal–Matrix Composite Powder by High-Energy Ball Milling and Ti6Al4V Powder by Gas Atomization

  • Mario Santiago-Herrera,
  • Jesús Ibáñez,
  • Marco De Pamphilis,
  • Jesús Manuel Alegre and ,
  • Juan Antonio Tamayo-Ramos,
  • Sonia Martel-Martín and
  • Rocío Barros
  • + 2 authors+ 0 author

14 April 2023

Environmental awareness and the necessary reduction in costs in industrial processes has facilitated the development of novel techniques such as Additive Manufacturing, decreasing the amount of raw materials and energy needed. The longing for improve...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
492 Views
19 Pages

Enhancing the Mechanical and Thermal Transport Properties of AZ31/Ti2AlC MAX-Phase Surface Composites

  • Essam B. Moustafa,
  • Ahmad Bamasag,
  • Abudellah Alqarni,
  • Rasha A. Youness and ,
  • Mohammed A. Taha and
  • Tamer S. Mahmoud
  • + 1 author+ 0 author

14 August 2026

This study investigates the evolution of microstructural, mechanical, and transport properties in AZ31 magnesium alloy surface composites reinforced with Ti2AlC MAX-phase particles at volume fractions of 6, 9, and 12 vol.%, which were fabricated by s...

(This article belongs to the Special Issue Advanced Composite Materials: Design, Implementation and Characterization)

of 18