The Sentinel-3A satellite, equipped with Synthetic Aperture Radar (SAR) Altimeter (SRAL) instrument to derive sea surface height, significant wave height and surface wind speed over the global ocean, was launched on 16 February 2016. The assessment o...
Undoped SrAl2O4 nanocrystals were obtained via solution combustion using urea as fuel. The afterglow properties of undoped SrAl2O4 were investigated. Green afterglow from undoped SrAl2O4 is visible to the human eye when the 325 nm irradiation of a he...
Generating accurate monthly estimations of water level fluctuations in reservoirs and lakes is crucial for supporting effective water resource management and protection. The dual-satellite configuration of Sentinel-3 makes it possible to monitor wate...
During its commissioning phase, the Copernicus Sentinel-3B satellite has been placed in a tandem formation with Sentinel-3A for a period of 6 months. This configuration allowed a direct comparison of measurements obtained by the two satellites. The p...
Dy3+ and Mn4+ codoped SrAl2O4 (SrAl2O4:Dy3+,Mn4+) phosphors were obtained by diffusing Mn4+ ions into Dy3+-doped SrAl2O4 via the constant-source diffusion technique. The influences of diffusion temperature and diffusion time on the emissions of SrAl2...
Optoelectronic synapses based on transition metal dichalcogenides have received much attention as artificial synapses due to their good stability in the air and excellent photoelectric properties; however, they suffer from ultraviolet light-triggered...
Its outstanding mechanical and thermodynamic characteristics make SrAl2O4 a highly desirable ceramic material for high-temperature applications. However, the effects of elevated pressure on the structural and other properties of SrAl2O4 are still poo...
The validation of significant wave height (SWH) data measured by the Sentinel-3A/3B SAR Altimeter (SRAL) is essential for the application of the data in ocean wave monitoring, forecasting and wave climate studies. Sentinel-3A/3B SWH data are validate...
Graphitic carbon nitride (g-C3N4) was supported on SrAl2O4:Eu,Dy-SiO2 by a colloidal-sol coating method to improve its light absorption property. Transmission electron microscopy (TEM) revealed that the nanoparticles of g-C3N4 were coated on sub-micr...
Research interest is active in Eu2+/Dy3-doped SrAl2O4 phosphors, and the photocurrent characteristics of Eu2+-doped SrAl2O4 without Dy3+ was investigated extensively. However, it exhibits a low photocurrent of ~1 μA owing to high resistance. In th...
This manuscript describes the synthesis of green long afterglow nanophosphors SrAl2O4:Eu2+, Nd3+ using the combustion process. The study encompassed the photoluminescence behavior, elemental composition, chemical valence, morphology, and phase purity...
Green emitting long afterglow phosphor SrAl2O4: Eu2+, Dy3+ was synthesized via the combustion method. The physical phase analysis was carried out by X-ray diffraction, the results show that the introduction of Eu2+ into the lattice of the matrix resu...
A series of strontium dialuminate SrAl4O7 nanopowders with the grossite-type structure doped with chromium and manganese ions were synthesized by the combined sol–gel solution combustion method with use of two different strontium salts. The Cr3...
This study examines the use of SrAl2O4: Eu2+, Dy3+ long-afterglow materials doped into g-C3N4/TiO2 coatings for photodegradation. The prepared sample was tested for the purification of automotive exhaust fumes, with the optimal mass ratio of g-C3N4/T...
A series of long-afterglow luminescent materials (SrAl2O4: Eu2+ (SAOE), SrAl2O4: Eu2+, Dy3+ (SAOED) and SrAl2O4: Eu2+, Dy3+, Gd3+ (SAOEDG)) was synthesized via the combustion method. Temperature and concentration control experiments were conducted on...
Slawsonite’s (SrAl2Si2O8) structure evolutions depending on temperature (27–1000 °C) have been studied by in situ single-crystal X-ray diffraction. The SrO7 polyhedron expands regularly with the temperature increase. Silicon and aluminum cations are...
This publication offers an economically promising method of persistent luminescent silicate glass synthesis that does not involve high temperatures or ready-made (separately synthesized) PeL particles. In this study, we demonstrate the formation of S...
The Sentinel-3 satellites are equipped with dual-band Microwave Radiometers (MWR) to derive the wet tropospheric correction (WTC) for satellite altimetry. The deployed MWR lack the 18 GHz channel, which mainly provides information on the surface emis...
The existing road surface marking with poor visibility at night results in traffic safety hazards in insufficient lighting roads. This study aims to prepare the dedicated aluminate-based persistent phosphors considering the integrated pavement enviro...
Long-afterglow self-luminous road marking coatings are promising for improving nighttime visibility, but their application is restricted by the poor water stability of SrAl2O4:Eu2+,Dy3+ phosphors and weak interfacial compatibility with polymer matric...
This study deals with SrAl2O4: Eu2+, Dy3+ phosphor pigments prepared by an optimized perchlorate-assisted combustion synthesis and tested for developing glow-in-the-dark safety markings. Recipes with different oxidizer/fuel ratios were designed to cr...
Non-destructive testing of carbon-fiber-reinforced plastic (CFRP) laminates with bidirectional fiber bundles (twill-weave) using a mechanoluminescence (ML) technique was proposed. The dynamic strain distributions and fracture phenomena of the CFRP la...
Red LEDs with a high color purity and high color rendering index are often used to compensate for the lack of red-light components in current white LEDs. Therefore, the new type of garnet-structured high color purity red phosphor Y2−xSrAl4SiO12...
Preparing submicron and nanoscale phosphors with good optical properties for practical applications is a challenging task for current inorganic long afterglow luminescent materials. This study utilized commercialized SrAl2O4:Eu2+, Dy3+ phosphors (SAO...
Flexible 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized nanofibrillated cellulose (ONFC) films with long afterglow luminescence containing modified SrAl2O4: Eu2+, Dy3+ (SAOED) phosphors were fabricated by a template method. Tetraethyl...
Due to the smaller ground footprint and higher spatial resolution of the Synthetic Aperture Radar (SAR) mode, altimeter observations from the Sentinel-3 satellites are expected to be overall more accurate in coastal areas than conventional nadir alti...
Satellite radar altimetry provides the only global, all-weather record of significant wave height (SWH), but Sentinel-3 Level-2 retrievals retain systematic, context-dependent errors near coasts and at low sea states. We present a two-stage calibrati...
Long-term relief of indoor volatile pollution has become a competitive issue worldwide in both visible and dark environments. A novel self-luminous wood coating with carbon dots (CDs)/titanium dioxide (TiO2) nanomaterial coated SrAl2O4: Eu2+, Dy3+ (C...
(Sr, Ca, Ba)Al2O4:Eu2+, Dy3+ phosphors were prepared via a high temperature solid-state reaction method. The correlation of phase structure, optical properties and lifetimes of the phosphors are investigated in this work. For the (Sr, Ca)Al2O4:Eu2+,D...
It is well known that internal waves (IWs) of tidal frequency (i.e., internal tides) are successfully detected in sea surface height (SSH) by satellite altimetry. Shorter period internal solitary waves (ISWs), whose periods (and spatial scales) are a...
Traditional fluorescent anti-counterfeiting materials usually exhibit fixed-wavelength excitation patterns and monochromatic luminescence, which are extremely easy to be counterfeited and have low security. Therefore, there is an urgent need to devel...
It is demonstrated that the synthetic aperture radar altimeter (SRAL) on board of the Sentinel-3A can detect short-period internal solitary waves (ISWs) with scales of the order of a kilometer. A variety of signatures owing to the surface manifestati...
A novel long-lasting luminescent composite material based on the (Ca,Sr)-Al-O system was synthesized using a solution combustion method. (Ca,Sr)3Al2O6 is the primary phase, with SrAl2O4 as a controllable secondary phase. Compared to conventional sing...
In this paper, a high-resolution Sentinel-3 synthetic aperture radar altimeter is used to observe ISWs in the Sulu Sea. Based on the advantages of the simultaneous observation of Sentinel-3 OLCI and SRAL, the changes in
Static electricity-induced luminescence (SEL) materials exhibit luminescence in response to minute electrical charges and therefore have potential for application in self-powered charge-detection sensors that operate without an external power source....
In 1996, Matsuzawa et al. reported on the extremely long-lasting afterglow of SrAl2O4:Eu2+ codoped with Dy3+ ions, which was more than 10-times brighter than the previously widely used ZnS:Cu,Co. Since then, research for stable and efficient persiste...
Strontium is a common radionuclide in radioactive waste, and its release into the environment can cause enormous damage to the ecosystem environment. In this study, the natural mineral allophane was selected as the substrate to prepare solidified cer...
The performance of a persistent phosphor is often determined by comparing luminance decay curves, expressed in cd/m
Aluminum–hydrogen compounds have drawn considerable interest for applications in solid-state hydrogen storage. The structural, hydrogen storage, electronic, mechanical, phonon, and thermodynamic properties of XAl2H2 (X = Ca, Sr, Sc, Y) hydrides...
The calcium- and strontium- alumo-germanides SrxCa1–xAl2Ge2 (x ≈ 0.4) and SrAl2Ge2 have been synthesized and structurally characterized. Additionally, a binary calcium germanide CaGe has also been identified as a byproduct. All three crys...
In this study, a new approach for producing phosphorescent aluminum coatings was studied. Using the plasma electrolytic oxidation (PEO) process, a porous oxide coating was produced on the Al6082 aluminum alloy substrate. Afterwards, activated stronti...
Satellite altimetry has been proven to measure water levels in lakes and rivers effectively. The Sentinel-3A satellite is equipped with a dual-frequency synthetic aperture radar altimeter (SRAL), which allows for inland water levels to be measured wi...
Two series of binary xerogel systems of Sr/Al with molar ratios of 0.1, 0.25, 0.5, and 1.0 were synthesized by the sol–gel technique with metallic strontium component as a precursor. The influence of the metallic precursor on the properties of...
In this work, coal fly ash, hereinafter CFA is proposed to work as raw material for immobilization of Sr-contaminated soil by microwave sintering in the path towards resource utilization of solid waste. The immobilization mechanism and performance wa...
In this work we report on the thermoluminescence (TL) and optically stimulated luminescence (OSL) properties of β-Na(Gd,Lu)F4:Tb3+ nanophosphors prepared via a standard high-temperature coprecipitation route. Irradiating this phosphor with X-ray...
Vacuum induction melting in a refractory crucible is an economical method to produce TiAl-based alloys, aiming to reduce the preparation cost. In this paper, a Sr2CeZrO6 refractory was synthesized by a solid-state reaction method using SrCO3, CeO2 an...
The primary objective of this study is to investigate and develop a rapid and effective method for the immobilization of Sr in the event of a nuclear leakage incident. Coal gangue, an underutilized form of solid waste from the coal industry, can be u...
SrAl2O4: Eu2+, Dy3+ polymeric composites are the reference photoluminescent materials in passive signaling due to their high emission intensity and long luminescent persistence. But their real long-term outdoor durability is still poorly understood....
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, struc...
The use of stress–strain analysis in structural design or mechanical components is critical for avoiding or investigating structural failures. In the case of complicated designs, mathematical full-field stress modeling produces imprecise predic...
of 2