Most Viewed

This comprehensive review examines the phenomena of stress corrosion cracking (SCC) and chloride-induced stress corrosion cracking (Cl-SCC) in materials commonly used in the oil and gas industry, with a focus on austenitic stainless steels. The study...

The corrosion of metals is very important, both economically and environmentally, and is a serious concern. Since the past decades, traditional (chemical) corrosion inhibitors to prevent corrosion have been and are still being used. Although these in...

In recent years, biochar has emerged as a remarkable biosourced material for addressing global environmental, agricultural, biomedical, and energy challenges. However, the performances of biochar rest in part on finely tuning its surface chemical pro...

Porous carbon is an emerging material for the capture of CO₂ from point sources of emissions due to its high structural, mechanical, and chemical stability, along with reusability advantages. Currently, research efforts are mainly focused on high- or...

The hard anodizing treatments of cast Al-Si alloys are notoriously difficult. Indeed, their microstructural features hinder the growth of a uniform, compact, and defect-free anodic oxide. In this paper, AlSi10Mg samples, produced via Gravity Casting...

In recent years, research has aimed to enhance the environmental friendliness of activated carbon by modifying its surface properties to effectively capture specific harmful gases. This study’s primary goal is to swiftly introduce oxygen functi...

Piping system failures in process industries pose significant financial, environmental, and social risks, with inadequate design and corrosion being major contributors. This review synthesizes the academic and normative literature on pipeline design...

This review examines recent methodologies for fabricating nonwoven polymer materials through electrospinning, focusing on the underlying physical principles, including the effects of external parameters, experimental conditions, material selection, a...

Society confronts the pressing environmental challenges posed by the pervasive presence of toxic pollutants in aquatic ecosystems. The repercussions of contaminant release extend far and wide, endangering marine life and human well-being. While vario...

One of the alternative materials used for conducting conservation treatment of iron artifacts is the rust converter, since it generates barrier properties and more stable oxides. The protective properties and surface modifications from using Mimosa t...

This paper focuses on investigating the use of low-pressure oxygen plasma as a surface treatment aimed at enhancing the wettability and dyeability of cotton fabrics for use in textiles and footwear materials. Plasma activation modified the cotton fab...

In the quest for advanced materials suitable for next-generation electronic and optoelectronic applications, tungsten disulfide (WS₂) ultrathin films have emerged as promising candidates due to their unique properties. However, obtaining WS₂ directly...

Researchers have just discovered an alternative to synthetic corrosion inhibitors, which are hazardous and terrible for the ecosystem, to prevent rusting in the environment. A metal corrodes when it is subjected to corrosive media (acid, base, or sal...

Employing a self-combustion method supported by egg white, pure and Fe-doped ZnO/C nanoparticles successfully biosynthesized. XRD, FTIR, Raman, SEM/EDS and TEM measurements were used to characterize the pure and doped systems. The materials under inv...

To realize simple and intelligent electrochemical ammonia (NH₃) detection in water, highly dense colloidal copper nanoparticles (CuNPs) were prepared and subsequently deposited onto a glassy carbon electrode (GCE). The CuNPs/GCE was then placed in an...

In this study, we report a green, one-step synthesis of fluorescent carbon quantum dots (PET-FCQDs) derived from polyethylene terephthalate (PET) waste using an environmentally friendly pyrolytic method. The PET-FCQDs were systematically characterize...

One of the most significant challenges the world is currently facing is wastewater treatment. A substantial volume of effluents from diverse sources releases numerous pollutants into the water. Among these contaminants, organic pollutants are particu...

Solid–liquid interfacial phenomena play an essential role in our everyday lives and are often regarded as the outcome of interactions at the solid–liquid interface. However, the intricately intrinsic mechanism underlying interfacial inter...

Metal–organic chemical vapor deposition (MOCVD) is a key method for scalable synthesis of two-dimensional transition metal dichalcogenide (2D-TMDC) layers. However, it faces several challenges, such as the unintentional co-deposition of carbon...

Bismuth telluride has garnered considerable attention owing to its versatile properties applicable in thermoelectric and antibacterial domains, as well as its intriguing topological insulating properties. In this work, our group fabricated bismuth te...

Non-noble metal electrocatalysts for the oxygen evolution reaction (OER) have recently gained particular attention. In the present work, a facile one-step electrodeposition method is applied in situ to synthesize cobalt sulfide nanostructures on nick...

Magnetic shape memory alloys have attracted considerable attention due to their multifunctional properties. Among these materials, Ni-Mn-Ga alloys are distinguished by their ability to achieve up to 10% strain when exposed to a magnetic field, a char...

Aluminum nitride (AlN) thin films were deposited on SiO₂ substrates by RF-magnetron sputtering at varying powers (110–140 W) and subsequently subjected to thermal annealing at 450 °C under nitrogen atmosphere. A comprehensive multi-techniqu...

The optical characteristics and electrical behavior of zinc oxide nanorods (ZnO-NRs) and silver nanoparticles (Ag-NPs) were investigated using advanced scanning probe microscopy techniques. The study revealed that the ZnO nanorods had a length of abo...

Porous PZT films offer significant potential due to tunable electromechanical properties, yet the polarization behavior remains insufficiently understood because of discontinuous morphology and domain structures. In this work, we study the impact of...

Zirconia (ZrO₂) ceramics and composites have attracted much attention in aerospace, biomedical and energy fields due to their high hardness, high wear resistance, excellent chemical stability and biocompatibility. However, the brittleness of ceramics...

Advances in nanotechnology have contributed to many innovative approaches in the forensic sciences, including the development of new techniques and protocols for latent fingermark detection. Among other nanomaterials, metal-based nanoparticles have b...

The research purpose of this work is to examine the adsorption interaction of gaseous molecules (GMs), such as NO, NO₂, SO, SO₂, and SO₃, with the surface of sodium magnesium phosphate NaMgPO₄ (033), in a neutral medium, using two different computati...

The removal of air pollutants is an important research topic in order to improve the environment. In addition, many common pollutants can affect human health to varying degrees. In this work, we investigate NO and SO₂ conversion by reaction with a co...

The integration of emulsion gels in 3D food printing has emerged as a promising strategy to enhance both the structural fidelity and functional performance of printed foods. Emulsion gels, composed of proteins, polysaccharides, lipids, and their comp...

Bipolar plates are one of the main components of proton exchange membrane fuel cells (PEMFCs). Their functions include distributing reactants, supporting the cell, and conducting heat and electricity. They account for a significant proportion of the...

Diffusion barrier composite films based on microfibrillated cellulose (MFC) and clay were developed with attention paid to the influence of thermal annealing and a fluorine-free surface silylation on their microstructure, water contact angle (WCA), m...

Density-functional theory calculations on P-rich InP(001):H surfaces are presented. Depending on temperature, pressure and substrate doping, hydrogen desorption or adsorption will occur and influence the surface electronic properties. For p-doped sam...

A detailed understanding of the mechanistic role of solid surface microstructures in modulating capillary forces and liquid transport in liquid bridge systems is crucial, for liquid bridges between rough surfaces are omnipresent in nature and various...

We present a buffer-pH-modulated electrokinetic concentration strategy in MEMS microchannels that harnesses simple pH shifts to neutralize and charge proteins, reversibly “pausing” them at a planar electric-gate electrode by tuning to the...

This work discusses studies of electron emissions during the interaction of low energy (in the keV energy range and below) singly charged ions with Aluminum surfaces. Analysis of the spectra provides insight into the electronic excitation processes a...

In the present study, we propose a new transparent thin-film ITO surface radio-frequency (RF) trap. Charged hybrid microstructures were localized in the developed ITO trap. We show, analytically and experimentally, that the position of the localizati...

This study focused on manufacturing efficient automobile sound-absorbing materials through alkaline treatment and dimple processing of recycled polyethylene terephthalate (rPET) nonwoven fabric. The rPET nonwoven fabric was produced with a sound-abso...

In this study, the fabrication of nickel (Ni)-cellulose nanofiber (CNF) composite electroplating films was attempted using sodium carboxymethyl cellulose (CMC) and 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-oxidized CNF as CNF introduced with carbo...

Cerium dioxide (CeO₂) is a promising material for photoelectrochemical applications, requiring a thorough understanding of the interplay between its properties and structure for optimal performance. This study investigated the photoelectrochemical pe...

The combination of the catalytic properties of Al₂O_3/TiO₂ formed an efficient system to degrade the ubiquitous pollutants TPA and PET. The coating (Al₂O₃)_0.75TiO₂ was characterized by X-ray diffraction. Stainless steel disks with photo-catalyst coati...

Here, we have synthesized four series of polyamide-conductive polymers and used them to modify Fe₃O₄ NPs/ITO electrodes. The ability of the modified electrodes to detect methotrexate (MTX) anticancer drug electrochemically was investigated. Synthesis...

Organic and pharmaceutical pollution of water is a serious problem, particularly when it comes to drinking and groundwater. Although some evaluations indicate that these pollutants are unlikely to be at current exposure levels, they are often detecte...

The integration of bacteriophages, a particular class of viruses that specifically infect bacteria and archaea, in biosensors for the monitoring of pathogens in foods and beverages is highly desirable. To this end, an increasing focus has been set on...

Nickel films of 40 nm thickness were obtained by means of magnetron sputtering on a single-crystalline silicon substrate. The films were subjected to rapid thermal treatment (RTT) for 7 s until the temperature increased from 200 to 550 °C. By mea...

Conductive polymer polypyrrole (PPy)-coated lithium-rich manganese-based Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (LMNCO) nanotube cathode materials were synthesized by electrospinning and subsequently subjected to low-temperature vapor-phase polymerization. X-ray...

Bacterial adhesion and biofilm formation on the surface of titanium implants are the main causes of implant-associated infection. An antibacterial coating on the implant surface can reduce the risk of biofilm formation. The aim of this study was to i...

The tailoring of the surface properties of cellulose nanocrystals (CNCs) to meet various requirements in environmental, food, and material areas has always been of great interest. In this study, the surface chemistry of CNCs was noncovalently modifie...

Waste seashell (scallop shell)-based adsorbent was prepared via mechanochemical reaction with sodium oxalate using ball milling. The oxalate-modified seashell-based adsorbents (OS) were prepared by varying the molar ratio of calcium and oxalate to 0....

Atmospheric pressure microplasma is a simple, cost-effective, efficient, and eco-friendly procedure, which is superior to the traditional nanomaterials synthesis techniques. It generates high yields and allows for a controlled growth rate and morphol...