Pyrazole, characterized by a five-membered heterocyclic structure featuring two neighboring nitrogen atoms, serves as a core element. Pyrazoles hold a privileged status as versatile frameworks in various sectors of the chemical industry, including me...
This review presents a summary of reactions that take place during the “Leuckart-type reaction”. The significance of, as well as recent advancements in, the synthesis of amines through simple and inexpensive methods using readily availabl...
Carbon nanotubes (CNTs) are cylindrical-shaped materials composed of hexagonally arranged hybridized carbon atoms with versatility in synthesis methods and diverse applications. This review is focused on the fabrication, physicochemical and spectrosc...
Contemporary technological and industrial advancements have led to increased reliance on chemicals for product innovation, leading to heightened contamination of water sources by traditional pollutants (organic dyes, heavy metals) and disease-causing...
The alkyne zipper reaction is an internal-to-terminal alkyne isomerization reaction with many interesting applications in synthetic chemistry, as it constitutes an efficient means of achieving acetylene functionalization. A review of its applications...
Consideration of the changes in free energy shows that the assumed initial steps in reactions of H2O2 with Fe2+ and Fe3+ in the free radical theory are not consistent. The free radical theory is unable to account for the Fe3+-initiated decomposition...
Light olefins as one the most important building blocks in chemical industry can be produced via Fischer–Tropsch synthesis (FTS) from syngas. FT synthesis conducted at high temperature would lead to light paraffins, carbon dioxide, methane, and C5+ l...
One-pot reactions offer advantages like easy automation, higher product yields, minimal waste generation, operational simplicity, and thus reduced cost, time and energy. This review presents a comprehensive overview of one-pot reactions including tri...
The equilibrium solubility of benzoic acid in water and ethanol, as well as in nine {ethanol (1) + water (2)} mixtures, was determined from T = (293.15 to 323.15) K. Benzoic acid mole fraction solubility in these aqueous-ethanolic mixtures was adequa...
Bio-oil, although rich in chemical species, is primarily used as fuel oil, due to its greater calorific power when compared to the biomass from which it is made. The incomplete understanding of how to explore its chemical potential as a source of val...
For decades, the comparison of experimental data with theoretical results in studying the biochemistry of vitamin B12 has been very confusing. While the methylcobalamin cofactor-dependent Methionine Synthase process can undergo unlimited turnovers, a...
Among halogenated molecules, those containing chlorine atoms are fundamental in many areas such as pharmaceuticals, polymers, agrochemicals and natural metabolites. Despite the fact that many reactions have been developed to install chlorine on organ...
The present review is a comprehensive update of the synthesis of monocyclic β-lactams via cycloaddition reactions. According to the IUPAC definition of cycloaddition, both elementary and stepwise processes (formal cycloadditions) have been consi...
The experimental data on hydrogen adsorption on five nanoporous activated carbons (ACs) of various origins measured over the temperature range of 303–363 K and pressures up to 20 MPa were compared with the predictions of hydrogen density in the slit-...
Nearly 90% of thermosets are produced from petroleum resources, they have remarkable mechanical characteristics, are chemically durable, and dimensionally stable. However, they can contribute to global warming, depletion of petroleum reserves, and en...
There is a growing interest in the production of biofuels and biochemicals from renewable biomass. Biomass in the form of woody and agricultural residues, municipal solid waste and other organic refuse is becoming popular as a feedstock for biofuel a...
The goal of finding efficient and safe hydrogen storage material motivated researchers to develop several materials to fulfil the demand of the U.S. Department of Energy (DOE). In the past few years, several metal hydrides, complex hydrides such as b...
Dry reforming of methane (DRM) reaction has drawn much interest due to the reduction of greenhouse gases and production of syngas. Coking and sintering have hindered the large-scale operations of Ni-based catalysts in DRM reactions at high temperatur...
Biomass allows us to obtain energy and high-value-added compounds through the use of different physical and chemical processes. The glycerol obtained as a by-product in the synthesis of biodiesel is considered a biomass compound that has the potentia...
A range of hemiacetal esters were synthesized by the reaction between carboxylic acids and butyl vinyl ether using n-dodecyl dihydrogen phosphate as catalyst. Specifically, nonanoic, propionic, acrylic, sebacic, and fumaric acids were used as substra...
In this work, a highly selective and active gold-based catalyst for the oxidation of high concentrated monoethylene glycol (MEG) in aqueous solution (3 M, 20 wt%) is described. High glycolic acid (GA) selectivity was achieved under mild reaction cond...
The benzo[1,2,3]dithiazole is a unique heteroaromatic functionality whose conjugated profile instils some fascinating electronic properties. This has been historically recognized in the design and manufacture of organic dyes early last century. Altho...
Herein, we report efficient visible light-induced photoredox reactions of C–H/N–H and C–X Bonds. These methods have provided access to varied portfolio of synthetically important γ-ketoesters, azaspirocyclic cyclohexadienones...
A literature review was conducted to examine the current understanding of the kinetics and mechanism of electrochemical reactions occurring during the electrodeposition of chromium coatings from electrolytes based on trivalent chromium compounds. The...
Fischer–Tropsch synthesis (FTS) produces hundreds of hydrocarbons and oxygenates by simple reactants (CO + H2) and the detailed chain propagation mechanism is still in dispute. An industrial iron-based catalyst was used to further clarify the mechani...
The concept of the rate determining step, i.e., the step having the strongest influence on the reaction rate or even being the only one present in the rate equation, is often used in heterogeneous catalytic reactions. The utilization of this concept...
Anisole is a straw-colored aromatic compound mainly used in making solvents, flavoring agents, perfumes, fuel additives, and in the synthesis industries. Anisole, also known as methoxybenzene, is synthesized from sodium phenoxide or phenol using vari...
The term LOHC stands for Liquid Organic Hydrogen Carriers. The term has been so well accepted by the scientific community that the studies published before the existence of this name are not very visible. In this mini-review, we have tried to rehabil...
Energy consumption places growing demands on modern lifestyles, which have direct impacts on the world’s natural environment. To attain the levels of sustainability required to avoid further consequences of changes in the climate, alternatives for su...
1,3-Dienes are vital building blocks in organic synthesis. They underpin many fundamental synthetic transformations and are present in numerous natural products and drug candidate molecules. The rearrangement of an alkylallene to a 1,3-diene is an at...
Zinc oxide and titanium dioxide are materials with strong photocatalytic and antimicrobial activity. This activity is greater when the material is in nanocrystalline form. It has been seen that these properties are also present in the ZnO-TiO2 nanoco...
Zinc oxide is a safe material for humans, with high biocompatibility and negligible cytotoxicity. Interestingly, it shows exceptional antimicrobial activity against bacteria, viruses, fungi, etc., especially when reduced to the nanometer size. As it...
This review is based on hydrothermal synthetic procedures that generate different vanadium oxide microstructures with mixed oxidation states, where different vanadium (V5+) precursors (vanadate, vanadium oxide, vanadium alkoxide, etc.,) are used to o...
Arenediazonium o-benzenedisulfonimides have been used as efficient electrophilic partners in Cu(I) catalysed Ullmann-type coupling. The synthetic protocols are mild and easy, and produced either N-alkylanilines, aryl ethers, or thioethers in fairly g...
This review emphasizes the importance of the catalytic conversion techniques in the production of clean liquid and hydrogen fuels (XTF) and chemicals (XTC) from the carbonaceous materials including coal, natural gas, biomass, organic wastes, biogas a...
The kinetics of modified versions of the model of the Fenton reaction have been investigated. In these versions, radicals are produced by splitting FeO2+ (dissociation product of Fe2+ ozonide Fe2+O3) into Fe3+ and OH. The analysis shows that the revi...
Pincer ligands occupy three coplanar sites at metal centers and often support both stability and reactivity. The five-coordinate [FeIIICl2(tia-BAI)] complex (tia-BAI− = 1,3-bis(2’-thiazolylimino)isoindolinate(−)) was considered as a...
The self-condensation and cross-condensation reactions of ethanol and isoamyl alcohol are examined to better understand the potential routes to value-added byproducts from fuel ethanol production. Reactions have been carried out in both batch autocla...
Liquid organic hydrogen carriers (LOHCs) are an interesting alternative for hydrogen storage as the method is based on the reversibility of hydrogenation and dehydrogenation reactions to produce liquid and safe components at room temperature. As hydr...
Humanity’s growing dependence on non-renewable resources and the ensuing environmental impact thus generated have spurred the search for alternatives to replace chemicals and energy obtained from petroleum derivatives. Within the group of biofu...
Epoxy thermosets need to be designed for simple recycling and biomass resource utilization in order to be fully sustainable building materials. The development of covalent adaptive networks (CANs) using adaptive covalent chemistry (ACC) may be helpfu...
The use of Liquid Organic Hydrogen Carriers (LOHC) is one of the potential options to store hydrogen. Today, the vast majority of compounds used as LOHC come from the oil industry. Using biosourced LOHC would be a step forward in the development of t...
In order to explore co-production alternatives, a once-through process for CO2 hydrogenation to chemicals and liquid fuels was investigated experimentally. In this approach, two different catalysts were considered; the first was a Cu-based catalyst t...
Acid-treated montmorillonites (MMT) were used as catalysts of carvone isomerization to carvacrol. Mineral acids—sulfuric, hydrochloric, nitric acids and organic acids (acetic and chloroacetic)—were used for the acid treatment. Prepared materials were...
In this study, we present the effects of time and temperature on the formation of urea deposits and their composition under conditions realistic to mobile heavy-duty SCR applications. To this end, various synthesis times were evaluated (1 h, 4 h and...
The global economy and its production chains must move away from petroleum-based products, to achieve this goal, alternative carbon feedstocks need to be established. One area of concern is sustainable production of synthetic lubricants. A lubricatin...
Computer simulation is a crucial element in the design of chemical processes. Although numerous commercial software options are widely recognized, the expense associated with acquiring and sustaining valid software licenses can be prohibitive. In con...
The E. coli 2-oxoglutarate dehydrogenase complex (OGDHc) is a multienzyme complex in the tricarboxylic acid cycle, consisting of multiple copies of three components, 2-oxoglutarate dehydrogenase (E1o), dihydrolipoamide succinyltransferase (E2o) and d...
Deoxygenation and subsequent cracking of fatty acids are key steps in production of biodiesel fuels from renewable plant sources. Despite the fact that multiple catalysts, including those containing group 10 metals (Ni, Pd, and Pt), are employed for...
Pyrolysis oil derived from waste tires consists of sulfur content in the range of 7000 to 9000 ppm. For use in diesel engines, its sulfur content must be lowered to 10 to 15 ppm. Though conventional hydrodesulfurization is suitable for the removal of...
