Skip to Content

531 Results Found

  • Article
  • Open Access
11 Citations
3,896 Views
15 Pages

20 April 2024

Defect inspection is a critical task in ensuring the surface quality of steel plates. Deep neural networks have the potential to achieve excellent inspection accuracy if defect samples are sufficient. Nevertheless, it is very different to collect eno...

(This article belongs to the Special Issue Multi-Modal Image Processing Methods, Systems, and Applications)
  • Article
  • Open Access
19 Citations
9,489 Views
11 Pages

1 July 2017

To efficiently inspect surface defects on steel ball bearings, a new method based on a circumferential eddy current array (CECA) sensor was proposed here. The best probe configuration, in terms of the coil quality factor (Q-factor), magnetic field in...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
24 Citations
6,781 Views
17 Pages

15 February 2021

Surface flatness is an important indicator for the quality assessment of concrete surfaces during and after slab construction in the construction industry. Thanks to its speed and accuracy, terrestrial laser scanning (TLS) has been popularly used for...

(This article belongs to the Special Issue Point Cloud Data Acquisition, Analysis, and Management for Construction Industry)
  • Review
  • Open Access
668 Views
52 Pages

2 August 2026

The growth of electric vehicles has increased the need for reliable, low-resistance Al–Cu battery interconnects. Laser welding provides localized heat input, high productivity, and automation potential, but Al–Cu joining remains limited b...

(This article belongs to the Special Issue Research Progress of Laser Welding Technology of Metals and Alloys)
  • Article
  • Open Access
1,898 Views
21 Pages

Multi-Scale Attention-Augmented YOLOv8 for Real-Time Surface Defect Detection in Fresh Soybeans

  • Zhili Wu,
  • Yakai He,
  • Da Huo,
  • Zhiyou Zhu and ,
  • Yanchen Yang and
  • Zhilong Du
  • + 1 author+ 0 author

23 September 2025

Ensuring the surface quality of fresh soybeans is critical for maintaining their commercial value and consumer confidence. However, traditional manual inspection remains labor-intensive, subjective, and inadequate for real-time, high-throughput sorti...

(This article belongs to the Special Issue Processes in Agri-Food Technology)
  • Article
  • Open Access
54 Citations
14,688 Views
22 Pages

A Real-Time Automated Defect Detection System for Ceramic Pieces Manufacturing Process Based on Computer Vision with Deep Learning

  • Esteban Cumbajin,
  • Nuno Rodrigues,
  • Paulo Costa,
  • Rolando Miragaia and ,
  • Luís Frazão,
  • Nuno Costa,
  • Antonio Fernández-Caballero,
  • Jorge Carneiro,
  • Leire H. Buruberri and
  • António Pereira
  • + 5 authors+ 0 author

31 December 2023

Defect detection is a key element of quality control in today’s industries, and the process requires the incorporation of automated methods, including image sensors, to detect any potential defects that may occur during the manufacturing proces...

(This article belongs to the Special Issue IoT Sensor Systems: Design, Interfaces, Signals, Processing, and Applications)
  • Article
  • Open Access
515 Views
26 Pages

A LiDAR-Based Automatic Workflow for Flatness Detection of Simulated Concrete Placing Surfaces Using Multi-Frame Median Fusion

  • Jie Wang,
  • Sheng Qiang,
  • Lurong He,
  • Weijie Chen and ,
  • Jianli Tong and
  • Wei Shuai
  • + 1 author+ 0 author

15 July 2026

Concrete placing surface flatness is an important quality indicator affecting thickness control, finishing efficiency, and subsequent construction quality. Although point-cloud-based flatness inspection has been widely studied for completed floors, w...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Review
  • Open Access
535 Views
29 Pages

A Review of Steel Surface Defect Detection for Industrial Applications: Evaluation Frameworks, Data Challenges, and Model Mechanisms

  • Dan Wang,
  • Shengsheng Xie,
  • Yuanxiao Li,
  • Lisha Zhu and ,
  • Yun Lin and
  • Cong Yuan
  • + 1 author+ 0 author

Steel surface defect detection is a critical component of industrial quality inspection based on artificial intelligence (AI). In recent years, deep learning has substantially improved the level of automation in this task. However, model performance...

(This article belongs to the Topic Artificial Intelligence in Smart Industrial Diagnostics and Manufacturing—Third Edition)
  • Article
  • Open Access
38 Citations
5,029 Views
13 Pages

Defect Detection on Rolling Element Surface Scans Using Neural Image Segmentation

  • Nico Prappacher,
  • Markus Bullmann,
  • Gunther Bohn,
  • Frank Deinzer and
  • Andreas Linke

9 May 2020

The surface inspection of steel parts like rolling elements for roller bearings is an essential component of the quality assurance process in their production. Existing inspection systems require high maintenance cost and allow little flexibility. In...

(This article belongs to the Special Issue Deep Learning Applied to Image Processing)
  • Article
  • Open Access
700 Views
24 Pages

13 June 2026

Rapid and non-contact surface inspection is essential for quality control in modern production. Optical coherence tomography (OCT) can image a surface without contact, but turning those images into roughness parameters usually requires specialized pr...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
122 Citations
15,894 Views
13 Pages

In Situ 3D Monitoring of Geometric Signatures in the Powder-Bed-Fusion Additive Manufacturing Process via Vision Sensing Methods

  • Zhongwei Li,
  • Xingjian Liu,
  • Shifeng Wen,
  • Piyao He and ,
  • Kai Zhong,
  • Qingsong Wei,
  • Yusheng Shi and
  • Sheng Liu
  • + 3 authors+ 0 author

12 April 2018

Lack of monitoring of the in situ process signatures is one of the challenges that has been restricting the improvement of Powder-Bed-Fusion Additive Manufacturing (PBF AM). Among various process signatures, the monitoring of the geometric signatures...

(This article belongs to the Special Issue Depth Sensors and 3D Vision)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,697 Views
20 Pages

Tablet surface defects are typically controlled by visual inspection in the pharmaceutical industry. This is an insufficient response variable for knowledge-based formulation and process development, and it results in rather limited robustness of the...

(This article belongs to the Special Issue Feature Papers to Celebrate the Inaugural Issue of Journal of Pharmaceutical and BioTech Industry)
  • Article
  • Open Access
6 Citations
6,170 Views
29 Pages

Research on Adaptive Edge Detection Method of Part Images Using Selective Processing

  • Yaohe Li,
  • Long Jin,
  • Min Liu,
  • Youtang Mo and ,
  • Weiguang Zheng,
  • Dongyuan Ge and
  • Yindi Bai
  • + 2 authors+ 0 author

17 October 2024

Visual quality inspection of part surfaces is a crucial step in industrial production. Image edge detection is a common technique for assessing the surface conditions of parts. However, current methods have limitations, including poor noise filtering...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
6 Citations
6,296 Views
30 Pages

A Novel Active Imaging Model to Design Visual Systems: A Case of Inspection System for Specular Surfaces

  • Jorge Azorin-Lopez,
  • Andres Fuster-Guillo,
  • Marcelo Saval-Calvo,
  • Higinio Mora-Mora and
  • Juan Manuel Garcia-Chamizo

22 June 2017

The use of visual information is a very well known input from different kinds of sensors. However, most of the perception problems are individually modeled and tackled. It is necessary to provide a general imaging model that allows us to parametrize...

(This article belongs to the Special Issue State-of-the-Art Sensors Technology in Spain 2017)
  • Systematic Review
  • Open Access
111 Citations
14,200 Views
29 Pages

A Systematic Review on Deep Learning with CNNs Applied to Surface Defect Detection

  • Esteban Cumbajin,
  • Nuno Rodrigues,
  • Paulo Costa,
  • Rolando Miragaia and ,
  • Luís Frazão,
  • Nuno Costa,
  • Antonio Fernández-Caballero,
  • Jorge Carneiro,
  • Leire H. Buruberri and
  • António Pereira
  • + 5 authors+ 0 author

25 September 2023

Surface defect detection with machine learning has become an important tool in industries and a large field of study for researchers or workers in recent years. It is necessary to have a simplified source of information that helps us to better focus...

(This article belongs to the Special Issue Feature Papers in Section AI in Imaging)
  • Article
  • Open Access
43 Citations
7,752 Views
20 Pages

A Method for Automatic Surface Inspection Using a Model-Based 3D Descriptor

  • Carlos A. Madrigal,
  • John W. Branch,
  • Alejandro Restrepo and
  • Domingo Mery

2 October 2017

Automatic visual inspection allows for the identification of surface defects in manufactured parts. Nevertheless, when defects are on a sub-millimeter scale, detection and recognition are a challenge. This is particularly true when the defect generat...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
3 Citations
3,354 Views
10 Pages

25 June 2022

An optical measuring method is presented, with which it is possible to measure and evaluate reflective cylindrical surfaces using a combination of deflectometry and subsequent reconstruction of the surface. The system is set up and tested on rolling...

  • Article
  • Open Access
1,610 Views
21 Pages

3D Laser Scanning-Based Automated Wall Surface Flatness Inspection

  • Haile Shuai,
  • Huihai Chi,
  • Yujiang Li,
  • Yuanqing Wang and ,
  • Yachao Qian,
  • Zhenbin Lai and
  • Yansong Wang
  • + 2 authors+ 0 author

22 July 2026

Indoor wall surface flatness is a mandatory acceptance item in building decoration work, but it is still commonly checked using a 2 m straightedge and a feeler gauge. This manual method samples only a limited number of locations, depends on inspector...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Article
  • Open Access
1 Citations
632 Views
44 Pages

YOLOv11–BiFPN–DAAF: An Object Detection Framework for Automated Surface Inspection of Balsa Wood Panels

  • Cristian Zambrano-Vega,
  • Washington Chiriboga-Casanova,
  • Byron Oviedo,
  • Efraín Díaz-Macías and
  • Edgar Suárez Bardelline

Automated surface inspection of balsa wood panels is challenging because defects may be small, elongated, weakly contrasted, or visually similar to natural grain patterns. This study proposes YOLOv11–BiFPN–DAAF, an enhanced object-detecti...

(This article belongs to the Special Issue Intelligent Automation: Bridging Artificial Intelligence and Automation)
  • Review
  • Open Access
266 Views
52 Pages

Computer Vision-Based Steel Surface Defect Detection: A Survey

  • Xiang Zou,
  • Yahan Yao,
  • Jiaqing Chen,
  • Chengjun Xu and
  • Tao Liu

23 October 2026

Steel surface defect detection is a core component of quality control in steel manufacturing and is crucial for product performance and production efficiency. In recent years, computer-vision-based deep learning methods have decisively surpassed trad...

(This article belongs to the Special Issue Sensor Signal Analysis for Intelligent Health Management and Autonomous Systems)
  • Article
  • Open Access
3 Citations
1,681 Views
19 Pages

Automated Quality Control of Cleaning Processes in Automotive Components Using Blob Analysis

  • Simone Mari,
  • Giovanni Bucci,
  • Fabrizio Ciancetta,
  • Edoardo Fiorucci and
  • Andrea Fioravanti

24 April 2025

This study presents an automated computer vision system for assessing the cleanliness of plastic mirror caps used in the automotive industry after a washing process. These components are highly visible and require optimal surface conditions prior to...

(This article belongs to the Special Issue Intelligent Industrial Process Control Systems: 2nd Edition)
  • Article
  • Open Access
7 Citations
2,540 Views
21 Pages

N/S Co-Doped Carbon-Coated Micro-Expanded Graphite for High-Performance Lithium-Ion Battery Anodes

  • Wenjie Wang,
  • Xuan Zhang,
  • Xianchao Wang,
  • Chengwei Gao and ,
  • Jinling Yin,
  • Qing Wen and
  • Guiling Wang
  • + 2 authors+ 0 author

25 May 2025

Natural graphite (NG) is abundant and has a high capacity for lithium-ion storage, but its narrow interlayer spacing and poor cyclic stability limit its use in high-performance lithium-ion batteries (LIBs). To address this, a N/S co-doped micro-expan...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
95 Citations
10,970 Views
24 Pages

3 August 2020

Traditional quality inspection of prefabricated components is labor intensive, time-consuming, and error prone. This study developed an automated geometric quality inspection technique for prefabricated housing units using building information modeli...

(This article belongs to the Section Engineering Remote Sensing)
  • Article
  • Open Access
13 Citations
4,626 Views
20 Pages

Analysis of Laser Sensors and Camera Vision in the Shoe Position Inspection System

  • Jaromír Klarák,
  • Ivan Kuric,
  • Ivan Zajačko,
  • Vladimír Bulej and ,
  • Vladimír Tlach and
  • Jerzy Józwik
  • + 1 author+ 0 author

12 November 2021

Inspection systems are currently an evolving field in the industry. The main goal is to provide a picture of the quality of intermediates and products in the production process. The most widespread sensory system is camera equipment. This article des...

(This article belongs to the Section Radar Sensors)
  • Article
  • Open Access
425 Views
15 Pages

25 July 2026

Surface quality is a critical indicator of product performance, creating a growing demand for real-time surface inspection in industrial manufacturing. However, conventional surface normal measurement techniques require sequential measurements with v...

(This article belongs to the Special Issue Recent Innovations in Computational Imaging and Sensing)
  • Article
  • Open Access
6 Citations
2,385 Views
12 Pages

Preparation of Expanded Graphite-VO2 Composite Cathode Material and Performance in Aqueous Zinc-Ion Batteries

  • Jiaye Li,
  • Jing Zhao,
  • Zebin Wang,
  • Huan Liu and ,
  • Qing Wen,
  • Jinling Yin and
  • Guiling Wang
  • + 2 authors+ 0 author

10 June 2024

Due to safety problems caused by the use of organic electrolytes in lithium-ion batteries and the high production cost brought by the limited lithium resources, water-based zinc-ion batteries have become a new research focus in the field of energy st...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
417 Views
27 Pages

29 September 2026

Automated multi-view acquisition is widely used in industrial production but remains underexplored for furniture inspection. This study proposes a task-oriented multi-view acquisition planning method for panel furniture. The method constructs a hiera...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
170 Citations
11,273 Views
20 Pages

15 November 2019

In the lumber and wood processing industry, most visual quality inspections are still done by trained human operators. Visual inspection is a tedious and repetitive task that involves a high likelihood of human error. Currently, new automated solutio...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
6 Citations
3,152 Views
14 Pages

Reflectance Transformation Imaging Visual Saliency: Local and Global Approaches for Visual Inspection of Engineered Surfaces

  • Marvin Nurit,
  • Gaëtan Le Goïc,
  • Stéphane Maniglier,
  • Pierre Jochum and
  • Alamin Mansouri

24 October 2022

Reflectance Transformation Imaging (RTI) is a non-contact technique which consists in acquiring a set of multi-light images by varying the direction of the illumination source on a scene or a surface. This technique provides access to a wide variety...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
30 Citations
5,504 Views
18 Pages

29 September 2022

Recently, the construction industry has benefited from the increased application of smart construction led by the core technologies of the fourth industrial revolution, such as BIM, AI, modular construction, and AR/VR, which enhance productivity and...

(This article belongs to the Special Issue Application of Geographic Information System and Building Information Modelling: Volume II)
  • Article
  • Open Access
7 Citations
3,971 Views
18 Pages

Intelligent Casting Quality Inspection Method Integrating Anomaly Detection and Semantic Segmentation

  • Min-Chieh Chen,
  • Shih-Yu Yen,
  • Yue-Feng Lin,
  • Ming-Yi Tsai and
  • Ting-Hsueh Chuang

13 April 2025

Wind power generation plays an important role in renewable energy, and the core casting components have extremely high requirements for precision and quality. In actual practice, we found that an insufficient workforce limits traditional manual inspe...

(This article belongs to the Section Machines Testing and Maintenance)
  • Article
  • Open Access
25 Citations
6,940 Views
16 Pages

A Deep-Learning-based 3D Defect Quantitative Inspection System in CC Products Surface

  • Liming Zhao,
  • Fangfang Li,
  • Yi Zhang,
  • Xiaodong Xu and ,
  • Hong Xiao and
  • Yang Feng
  • + 1 author+ 0 author

12 February 2020

To create an intelligent surface region of interests (ROI) 3D quantitative inspection strategy a reality in the continuous casting (CC) production line, an improved 3D laser image scanning system (3D-LDS) was established based on binocular imaging an...

(This article belongs to the Special Issue Advanced Computational Intelligence for Object Detection, Feature Extraction and Recognition in Smart Sensor Environments)
  • Article
  • Open Access
13 Citations
5,416 Views
15 Pages

18 November 2020

Automated quality inspection has been receiving increasing attention in manufacturing processes. Since the introduction of convolutional neural networks (CNNs), many researchers have attempted to apply CNNs to classification and detection of defect i...

(This article belongs to the Special Issue Big Data and AI for Process Innovation in the Industry 4.0 Era)
  • Article
  • Open Access
5 Citations
4,549 Views
20 Pages

Vision-Based System for Black Rubber Roller Surface Inspection

  • Thanh-Hung Nguyen,
  • Huu-Long Nguyen,
  • Ngoc-Tam Bui,
  • Trung-Hieu Bui and ,
  • Van-Ban Vu,
  • Hoai-Nam Duong and
  • Hong-Hai Hoang
  • + 2 authors+ 0 author

6 August 2023

This paper proposes a machine vision system for the surface inspection of black rubber rollers in manufacturing processes. The system aims to enhance the surface quality of the rollers by detecting and classifying defects. A lighting system is instal...

(This article belongs to the Topic Computer Vision and Image Processing)
  • Article
  • Open Access
20 Citations
4,377 Views
18 Pages

Impact of Image Compression on the Performance of Steel Surface Defect Classification with a CNN

  • Tajeddine Benbarrad,
  • Lamiae Eloutouate,
  • Mounir Arioua,
  • Fatiha Elouaai and
  • My Driss Laanaoui

Machine vision is increasingly replacing manual steel surface inspection. The automatic inspection of steel surface defects makes it possible to ensure the quality of products in the steel industry with high accuracy. However, the optimization of ins...

  • Article
  • Open Access
16 Citations
3,313 Views
18 Pages

A Path-Planning Method for Wall Surface Inspection Robot Based on Improved Genetic Algorithm

  • Yong Tao,
  • Yufang Wen,
  • He Gao,
  • Tianmiao Wang and ,
  • Jiahao Wan and
  • Jiangbo Lan
  • + 1 author+ 0 author

A wall surface inspection robot mainly relies on the inertial measurement unit and global positioning system (GPS) signal during intelligent wall surface inspection. The robot may encounter incorrect positioning under a GPS-denied environment, easily...

(This article belongs to the Section Artificial Intelligence)
  • Article
  • Open Access
2 Citations
2,538 Views
20 Pages

9 July 2024

Despite achieving numerous successes with surface defect inspection based on deep learning, the industry still faces challenges in conducting packaging defect inspections that include critical information such as ingredient lists. In particular, whil...

(This article belongs to the Special Issue Deep-Learning-Based Defect Detection for Smart Manufacturing)
  • Article
  • Open Access
11 Citations
3,075 Views
23 Pages

The Automated Inspection of Precast Utility Tunnel Segments for Geometric Quality Based on the BIM and LiDAR

  • Zhigang Guo,
  • Gang Wang,
  • Zhengxiong Liu,
  • Lingfeng Liu and ,
  • Yakun Zou,
  • Shengzhen Li,
  • Ran Yang,
  • Xin Hu,
  • Shenghan Li and
  • Daochu Wang
  • + 5 authors+ 0 author

30 August 2024

The quality inspection of each precast utility tunnel segment is crucial, especially the cross-sectional dimensions and surface smoothness, since they influence the assembly precision at the construction site. Traditional manual inspection methods ar...

(This article belongs to the Special Issue Intelligence and Automation in Construction Industry)
  • Article
  • Open Access
10 Citations
4,016 Views
21 Pages

Simulation of Laser Profilometer Measurements in the Presence of Speckle Using Perlin Noise

  • Sara Roos-Hoefgeest,
  • Mario Roos-Hoefgeest,
  • Ignacio Álvarez and
  • Rafael C. González

2 September 2023

In the manufacturing industry, inspection systems play a crucial role in ensuring product quality. High-resolution profilometric sensors have become increasingly popular for inspection due to their ability to provide detailed surface information. How...

(This article belongs to the Special Issue Applications of Manufacturing and Measurement Sensors)
  • Review
  • Open Access
8 Citations
8,257 Views
39 Pages

Learning-Based 3D Reconstruction Methods for Non-Collaborative Surfaces—A Metrological Evaluation

  • Ziyang Yan,
  • Nazanin Padkan,
  • Paweł Trybała,
  • Elisa Mariarosaria Farella and
  • Fabio Remondino

Non-collaborative (i.e., reflective, transparent, metallic, etc.) surfaces are common in industrial production processes, where 3D reconstruction methods are applied for quantitative quality control inspections. Although the use or combination of pho...

  • Article
  • Open Access
18 Citations
12,784 Views
17 Pages

A Bevel Gear Quality Inspection System Based on Multi-Camera Vision Technology

  • Ruiling Liu,
  • Dexing Zhong,
  • Hongqiang Lyu and
  • Jiuqiang Han

25 August 2016

Surface defect detection and dimension measurement of automotive bevel gears by manual inspection are costly, inefficient, low speed and low accuracy. In order to solve these problems, a synthetic bevel gear quality inspection system based on multi-c...

(This article belongs to the Special Issue Imaging: Sensors and Technologies)
  • Article
  • Open Access
5 Citations
3,321 Views
10 Pages

Quality Mapping of Offset Lithographic Printed Antenna Substrates and Electrodes by Millimeter-Wave Imaging

  • Jiao Zhang,
  • Jianhua Tang,
  • Wenfeng Sun,
  • Yan Zhang and ,
  • Xinke Wang and
  • Bin Yang
  • + 1 author+ 0 author

Offset lithographic printed flexible antenna substrate boards and electrodes have attracted much attention recently due to the boost of flexible electronics. Unmanned quality inspection of these printed substrate boards and electrodes demands high-sp...

(This article belongs to the Section Microwave and Wireless Communications)
  • Article
  • Open Access
35 Citations
5,329 Views
18 Pages

A Weld Surface Defect Recognition Method Based on Improved MobileNetV2 Algorithm

  • Kai Ding,
  • Zhangqi Niu,
  • Jizhuang Hui,
  • Xueliang Zhou and
  • Felix T. S. Chan

8 October 2022

Traditional welding quality inspection methods for pipelines and pressure vessels are time-consuming, labor-intensive, and suffer from false and missed inspection problems. With the development of smart manufacturing, there is a need for fast and acc...

(This article belongs to the Special Issue Optimisation Algorithms and Their Applications)
  • Article
  • Open Access
54 Citations
8,205 Views
15 Pages

20 February 2022

The inspection of welding surface quality is an important task for welding work. With the development of product quality inspection technology, automated and machine vision-based inspection have been applied to more industrial application fields beca...

(This article belongs to the Special Issue Precision Measurement and Machines)
  • Article
  • Open Access
27 Citations
6,409 Views
14 Pages

A Self-Healing PVA-Linked Phytic Acid Hydrogel-Based Electrolyte for High-Performance Flexible Supercapacitors

  • Jing Zhao,
  • Yuanqi Lu,
  • Yuhua Liu,
  • Lanxin Liu and ,
  • Jinling Yin,
  • Baozhi Sun,
  • Guiling Wang and
  • Yongquan Zhang
  • + 3 authors+ 0 author

17 January 2023

Flexible supercapacitors can be ideal flexible power sources for wearable electronics due to their ultra-high power density and high cycle life. In daily applications, wearable devices will inevitably cause damage or short circuit during bending, str...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
7 Citations
3,110 Views
21 Pages

An Image-Based Data-Driven Model for Texture Inspection of Ground Workpieces

  • Yu-Hsun Wang,
  • Jing-Yu Lai,
  • Yuan-Chieh Lo,
  • Chih-Hsuan Shih and
  • Pei-Chun Lin

11 July 2022

Nowadays, the grinding process is mostly automatic, yet post-grinding quality inspection is mostly carried out manually. Although the conventional inspection technique may have cumbersome setup and tuning processes, the data-driven model, with its vi...

(This article belongs to the Special Issue Advanced Sensors for Intelligent Control Systems)
  • Article
  • Open Access
19 Citations
5,272 Views
21 Pages

2 January 2022

Current railway tunnel inspections rely on expert operators performing a visual examination of the entire infrastructure and manually annotating encountered defects. Automatizing the inspection and maintenance task of such critical and aging infrastr...

(This article belongs to the Special Issue Robotics and AI for Infrastructure Inspection and Monitoring)
  • Article
  • Open Access
3 Citations
3,977 Views
21 Pages

Accelerated In Situ Inspection of Release Coating and Tool Surface Condition in Composites Manufacturing Using Global Mapping, Sparse Sensing, and Machine Learning

  • Caleb Schoenholz,
  • Shuangshan Li,
  • Kyle Bainbridge,
  • Vy Huynh and ,
  • Alex Gray and
  • Navid Zobeiry
  • + 1 author+ 0 author

The interfacial adhesion, friction, and resulting tool-part interaction during composites manufacturing contribute to the formation of residual stresses and process-induced deformations (PIDs). Tool-part interaction and PIDs are highly sensitive to p...

  • Article
  • Open Access
8 Citations
4,223 Views
12 Pages

Improved Ultrasonic Dead Zone Detectability of Work Rolls Using a Convolutional Neural Network

  • Yun-Taek Yeom,
  • Hun-Hee Kim,
  • Jinhyun Park,
  • Hak-Joon Kim and
  • Sung-Jin Song

16 May 2022

Rolled carbon steel sheets used in industrial and construction sites are formed by passing metal stock between two rotating rolls using a rolling mill, and the work roll is an essential part of the rolling mill. As the work rolls are in direct contac...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
9 Citations
3,634 Views
16 Pages

Reflectance Transformation Imaging as a Tool for Computer-Aided Visual Inspection

  • Abir Zendagui,
  • Gaëtan Le Goïc,
  • Hermine Chatoux,
  • Jean-Baptiste Thomas and ,
  • Pierre Jochum,
  • Stéphane Maniglier and
  • Alamin Mansouri
  • + 2 authors+ 0 author

29 June 2022

This work investigates the use of Reflectance Transformation Imaging (RTI) rendering for visual inspection. This imaging technique is being used more and more often for the inspection of the visual quality of manufactured surfaces. It allows reconstr...

(This article belongs to the Section Computing and Artificial Intelligence)

of 11