Skip to Content

216 Results Found

  • Article
  • Open Access
10 Citations
4,025 Views
19 Pages

Numerical Modelling of Steam Superheaters in Supercritical Boilers

  • Katarzyna Węglarz,
  • Dawid Taler,
  • Jan Taler and
  • Mateusz Marcinkowski

10 March 2023

This paper presents a numerical model of a four-pass supercritical steam superheater with a complex flow system. The specific heat of steam is a function of temperature and pressure, and the specific heat of flue gas is a function of temperature. Pre...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
6 Citations
3,397 Views
20 Pages

Effect of Superheat Steam on Ejector in Distilled Water Preparation System for Medical Injection

  • Bin Yang,
  • Xiaojing Ma,
  • Hailun Zhang,
  • Wenxu Sun and ,
  • Lei Jia and
  • Haoyuan Xue
  • + 1 author+ 0 author

11 July 2022

In this study, a wet steam model was used to investigate the effect of steam superheat on ejector performance and non-equilibrium condensation phenomena. The simulation data for the ejector were validated with experimental data. The simulations show...

(This article belongs to the Special Issue Entropy and Exergy Analysis in Ejector-Based Systems)
  • Article
  • Open Access
1 Citations
1,845 Views
24 Pages

Application of the Residue Method in Steam Superheater Fault Detection

  • Camelia Adela Maican,
  • Virginia Maria Rădulescu and
  • Cristina Floriana Pană

19 October 2023

Steam superheaters experience various defects that can affect the system’s operation differently. Maintaining a constant temperature and pressure of the steam at the turbine input is crucial for optimal steam turbine running conditions. This is...

  • Article
  • Open Access
10 Citations
4,768 Views
14 Pages

Simulation and Experimental Study on the Effect of Superheat on Solidification Microstructure Evolution of Billet in Continuous Casting

  • Nan Tian,
  • Guifang Zhang,
  • Peng Yan,
  • Pengchao Li and ,
  • Zhenhua Feng and
  • Xiaoliang Wang
  • + 1 author+ 0 author

31 January 2024

The control of the solidification structure of a casting billet is directly correlated with the quality of steel. Variations in superheat can influence the transition from columnar crystals to equiaxed crystals during the solidification process, subs...

(This article belongs to the Special Issue Characterization of Metallic Materials: Microstructure, Forming, and Heat Treatment)
  • Feature Paper
  • Article
  • Open Access
12 Citations
5,110 Views
34 Pages

21 July 2022

A new model of particle entrapment during continuous casting of steel is presented, which includes the effects of multiphase flow from argon gas injection and thermal buoyancy from superheat in the strand. The model simulates three different capture...

(This article belongs to the Special Issue High-Efficiency and High-Quality Continuous Casting Processes)
  • Article
  • Open Access
4 Citations
4,035 Views
12 Pages

An Analysis of Creep Phenomena in the Power Boiler Superheaters

  • Piotr Duda,
  • Łukasz Felkowski and
  • Andrzej Duda

1 November 2018

Higher temperatures of the power boiler superheater operation may lead to high strains caused by the creep phenomenon. This paper presents a determination of the maximum allowable operating temperature limited by the creep phenomenon for steam superh...

  • Article
  • Open Access
52 Citations
6,197 Views
14 Pages

20 September 2019

The heat transfer coefficient in the combustion chamber of industrial circulating flidized bed (CFB) boilers depends on many parameters as it is a result of multifactorial mechanisms proceeding in the furnace. Therefore, the development of an effecti...

(This article belongs to the Special Issue Selected Papers from the International Conference on Innovative Applied Energy (IAPE’19))
  • Article
  • Open Access
2 Citations
2,857 Views
15 Pages

16 November 2021

This paper presents the results of measurements of vibrations of the pipes of the steam superheater installed in the convection pass of the 235 MWe Circulating Fluidized Bed boiler (CFB) induced using sonic soot blowers of the Nirafon NI-100 type. Th...

(This article belongs to the Special Issue Progress and Novel Applications of Fluidized Bed Technology)
  • Article
  • Open Access
14 Citations
4,052 Views
15 Pages

Typical Damage Prediction and Reliability Analysis of Superheater Tubes in Power Station Boilers Based on Multisource Data Analysis

  • Guangkui Liu,
  • Xu Yang,
  • Xisheng Yang,
  • Kui Liang and ,
  • Dong An,
  • Di Wu and
  • Xiaohan Ren
  • + 2 authors+ 0 author

29 January 2022

The superheater and re-heater piping components in supercritical thermal power units are prone to creep and fatigue failure fracture after extensive use due to the high pressure and temperature environment. Therefore, safety assessment for superheate...

(This article belongs to the Special Issue Modelling of Thermal and Energy Systems)
  • Article
  • Open Access
1 Citations
2,599 Views
15 Pages

Numerical Investigation on Heat Transfer and Flow Resistance Characteristics of Superheater in Hydrocracking Heat Recovery Steam Generator

  • Danfeng Zhang,
  • Xin Wang,
  • Liang Zhao,
  • Huaqing Xie and ,
  • Chen Guo,
  • Feizhou Qian,
  • Hui Dong and
  • Yun Hu
  • + 3 authors+ 0 author

29 August 2023

The heat recovery steam generator (HRSG) was utilized to recover the waste heat resources of the catalyst’s regenerated gas with the objective to reduce the energy consumption of the hydrocracking process. In this study, the flow resistance and...

(This article belongs to the Special Issue Blue and Green Hydrogen Production)
  • Article
  • Open Access
9 Citations
3,208 Views
11 Pages

Crude Oil Pyrolysis Studies: Application to In Situ Superheat Steam Enhanced Oil Recovery

  • Eric N. Coker,
  • Burl Donaldson,
  • Brian Hughes and
  • Nadir Yilmaz

3 February 2023

This work focuses on the occurrence and composition of flammable pyrolysis gases which can be expected from stimulation of heavy oil with superheat steam. These gases can have commodity value or be used to fire a conventional boiler to generate steam...

(This article belongs to the Special Issue Enhanced Hydrocarbon Recovery)
  • Article
  • Open Access
10 Citations
5,089 Views
16 Pages

Organic Rankine Cycle Optimization Performance Analysis Based on Super-Heater Pressure: Comparison of Working Fluids

  • Ana Fernández-Guillamón,
  • Ángel Molina-García,
  • Francisco Vera-García and
  • José A. Almendros-Ibáñez

29 April 2021

The organic Rankine cycle (ORC) is widely accepted to produce electricity from low-grade thermal heat sources. In fact, it is a developed technology for waste-heat to electricity conversions. In this paper, an ORC made up of super-heater, turbine, re...

(This article belongs to the Special Issue Modelling of Thermal and Energy Systems)
  • Article
  • Open Access
31 Citations
11,852 Views
23 Pages

Effects of Degree of Superheat on the Running Performance of an Organic Rankine Cycle (ORC) Waste Heat Recovery System for Diesel Engines under Various Operating Conditions

  • Kai Yang,
  • Hongguang Zhang,
  • Songsong Song,
  • Fubin Yang and ,
  • Hao Liu,
  • Guangyao Zhao,
  • Jian Zhang and
  • Baofeng Yao
  • + 3 authors+ 0 author

1 April 2014

This study analyzed the variation law of engine exhaust energy under various operating conditions to improve the thermal efficiency and fuel economy of diesel engines. An organic Rankine cycle (ORC) waste heat recovery system with internal heat excha...

(This article belongs to the Special Issue Waste Heat Recovery—Strategy and Practice)
  • Article
  • Open Access
14 Citations
4,719 Views
15 Pages

Computational Analysis of Tube Wall Temperature of Superheater in 1000 MW Ultra-Supercritical Boiler Based on the Inlet Thermal Deviation

  • Pei Li,
  • Ting Bao,
  • Jian Guan,
  • Zifu Shi and ,
  • Zengxiao Xie,
  • Yonggang Zhou and
  • Wei Zhong
  • + 2 authors+ 0 author

3 February 2023

Local over-temperature is one of the main reasons for boiler tube failures (BTF). By accurately monitoring and controlling tube wall temperature, local over-temperature can be avoided. Based on the measured flue gas parameters and numerical simulatio...

(This article belongs to the Section F1: Electrical Power System)
  • Feature Paper
  • Article
  • Open Access
3 Citations
1,610 Views
18 Pages

25 April 2025

Superheat degree (SD) is an important indicator for identifying the status of aluminum electrolytic cells. The fire hole video of the aluminum electrolytic cell captured by an industrial camera is an important basis for identifying SD. This article p...

(This article belongs to the Special Issue Machine Learning Optimization of Chemical Processes)
  • Article
  • Open Access
6 Citations
4,122 Views
11 Pages

7 May 2020

The superheat of an electrolyte is an important indicator of the heat balance state of aluminum reduction cells. In industrial practice, it costs too much to accurately measure the superheat in every cell every day. A common alternative is to calcula...

  • Article
  • Open Access
464 Views
17 Pages

Effect of Precursor Alloy Overheating on Controlled Diffusion Solidification of Mg-Al-Zn Alloys

  • Xinyi Zhao,
  • Shanguang Liu,
  • Tao Gu,
  • Yang Sun and ,
  • Hong Qin,
  • Dan Wang and
  • Peizhong Feng
  • + 2 authors+ 0 author

21 July 2026

Diffusion solidification is an effective method to produce non-dendritic microstructures and reduce casting defects in magnesium alloys. However, the influence of precursor alloy superheat on the solidification behavior and the resulting microstructu...

(This article belongs to the Special Issue Research Progress of Crystal in Metallic Materials, 2nd Edition)
  • Article
  • Open Access
17 Citations
5,177 Views
13 Pages

15 April 2019

The aluminum content in oriented silicon steel obviously influences its magnetic properties. In the current work, the movement and melting process of added aluminum particles during Ruhrstahl-Heraeus (RH) treatment were simulated using a mathematical...

(This article belongs to the Special Issue Advanced Simulation Technologies of Metallurgical Processing)
  • Article
  • Open Access
7 Citations
3,281 Views
10 Pages

20 June 2021

The microstructure of the Si phase in Al-20Si alloys solidified under high pressure was investigated. The results demonstrate that the morphology of Si phase transformed (bulk→short rod→long needle) with the increase of superheat temperature under hi...

(This article belongs to the Special Issue Properties of Transition Metals and Their Compounds at Extreme Conditions)
  • Article
  • Open Access
4 Citations
2,915 Views
13 Pages

Predicting Conduction Heat Flux through Macrolayer in Nucleate Pool Boiling

  • Mohd Danish,
  • Mohammed K. Al Mesfer,
  • Khursheed B. Ansari,
  • Mudassir Hasan and ,
  • Abdelfattah Amari and
  • Babar Azeem
  • + 1 author+ 0 author

28 June 2021

In the current work, the heat flux in nucleate pool boiling has been predicted using the macrolayer and latent heat evaporation model. The wall superheat (ΔT) and macrolayer thickness (δ) are the parameters considered for predicting the heat flux. Th...

(This article belongs to the Section I: Energy Fundamentals and Conversion)
  • Article
  • Open Access
23 Citations
5,054 Views
13 Pages

Numerical Study on Solidification Behavior and Structure of Continuously Cast U71Mn Steel

  • Qing Fang,
  • Hongwei Ni,
  • Hua Zhang,
  • Bao Wang and
  • Chengsong Liu

7 November 2017

The solidification behavior and structure of continuous casting high rail U71Mn bloom, under different secondary cooling conditions and superheat, were numerically investigated using the Cellular Automaton-Finite Element (CAFE) model implemented with...

  • Article
  • Open Access
32 Citations
5,921 Views
23 Pages

13 October 2017

The Organic Rankine Cycle (ORC) is a promising form of technology for recovering low-grade waste heat. In this study, a regenerative ORC system is established to recover the waste flue gas of 160 °C. Focusing on thermodynamic and economic performance...

(This article belongs to the Section I: Energy Fundamentals and Conversion)
  • Article
  • Open Access
9 Citations
4,332 Views
24 Pages

9 January 2023

Organic Rankine cycle (ORC) is widely used to recover low-grade waste heat. The effects of heat-source temperature amplitude and period on ORC systems are discussed based on operating parameters and power-generation performance. The maximum allowable...

  • Article
  • Open Access
26 Citations
3,280 Views
15 Pages

Initial Transfer Behavior and Solidification Structure Evolution in a Large Continuously Cast Bloom with a Combination of Nozzle Injection Mode and M-EMS

  • Pu Wang,
  • Zhuang Zhang,
  • Zhan-peng Tie,
  • Meng Qi and ,
  • Peng Lan,
  • Shao-xiang Li,
  • Zhan-bing Yang and
  • Jia-quan Zhang
  • + 3 authors+ 0 author

8 October 2019

A three-dimensional numerical model combining electromagnetic field, fluid flow, heat transfer, and solidification has been established to study the effect of nozzle injection mode and mold electromagnetic stirring (M-EMS) on the internal quality of...

(This article belongs to the Special Issue Mathematical Modeling and Simulation in Ironmaking and Steelmaking)
  • Article
  • Open Access
7 Citations
5,127 Views
22 Pages

3 May 2019

In this study, an advanced-ultra super critical (A-USC) simulation model was developed using the Performance Evaluation of power system efficiencies (PEPSE) software and data collected from a 500 MW ultra-supercritical (USC) coal-fired power plant in...

(This article belongs to the Special Issue Energy Policy in South Korea)
  • Article
  • Open Access
2 Citations
2,926 Views
14 Pages

22 November 2025

Liquid γ-TiAl alloy was prepared by vacuum induction melting within graphite crucibles, then cast using a centrifugal technique. In this process, the degree of superheat (ΔT)—defined as the temperature above the melting point—...

(This article belongs to the Special Issue Advances in Light Alloys: Microstructure, Mechanical Properties, Forming Processes and Applications)
  • Article
  • Open Access
7 Citations
3,048 Views
17 Pages

11 August 2023

Centrifugal spray deposition forming technology, which is used in the preparation process of near-net-forming billets, not only reduces the macroscopic segregation and refines the microstructures of billets but also has the characteristics of a rapid...

  • Article
  • Open Access
4 Citations
3,778 Views
9 Pages

The study is aimed at revealing the specific features of the burning of hydrogen with oxygen in a water-vapor atmosphere. The purpose of the study is to define the optimal values for diluting the burning mixture with water vapor in the active burnout...

(This article belongs to the Special Issue Heat transfer and Thermal Managements of Innovative Systems)
  • Article
  • Open Access
8 Citations
6,039 Views
24 Pages

26 December 2015

The integrated photovoltaic/thermal collector (PV/T) with solar assisted heat pump (SAHP) often operates under an undesigned condition. Against the backdrop of heat pump system oscillation resulting from the mismatching between collectors area and co...

(This article belongs to the Special Issue Renewable Energy Applications and Energy Saving in Buildings)
  • Article
  • Open Access
7 Citations
3,716 Views
13 Pages

Analysis of Platen Superheater Tube Degradation in Thermal Power Plants via Destructive/Non-Destructive Characteristic Evaluation

  • Se-Beom Oh,
  • Jongbeom Kim,
  • Soon-Woo Han,
  • Kyung-Mo Kim and ,
  • Dong-Seok Yun and
  • Dong-Wook Kim
  • + 1 author+ 0 author

13 January 2022

Coal-fired power plants operating under Korea’s standard supercritical pressure operate in a high-temperature environment, with steam temperatures reaching 540 °C. A standard coal-fired power plant has a 30-year design life, and lifespan di...

  • Article
  • Open Access
8 Citations
4,277 Views
15 Pages

Numerical Simulation Study on Flow Heat Transfer and Stress Distribution of Shell-and-Tube Superheater in Molten Salt Solar Thermal Power Station

  • Yong Zeng,
  • Guangyao Cui,
  • Wangsong Wu,
  • Canjun Xu and ,
  • Jing Huang,
  • Jiaming Wang and
  • Zhongqing Yang
  • + 2 authors+ 0 author

18 May 2022

The flow heat transfer and stress distribution of the shell and tube superheater of the steam generation system in a 50 MW molten salt tank solar thermal power station are studied by numerical simulation, and the influence of the flow pattern of molt...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
5 Citations
3,950 Views
20 Pages

29 February 2024

This study is a numerical study to predict the temperature of the heat exchange tubes inside the pulverized coal-fired boiler through the conjugate heat transfer analysis. Due to the aspect ratio and number of tubes inside the pulverized coal-fired b...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
21 Citations
5,839 Views
13 Pages

Effect of Melt Overheating on Structure and Mechanical Properties of Al-Mg-Si Cast Alloy

  • Vladislav Deev,
  • Evgeny Prusov,
  • Ernst Ri,
  • Olga Prihodko and ,
  • Svetlana Smetanyuk,
  • Xizhang Chen and
  • Sergey Konovalov
  • + 2 authors+ 0 author

28 August 2021

The paper discusses the complex effect of melt overheating with subsequent fast cooling down to the pouring temperature on the crystallization process, microstructure and mechanical properties of Al-Mg-Si aluminum alloy. The results obtained facilita...

  • Article
  • Open Access
1 Citations
3,575 Views
20 Pages

Numerical Modelling of Water Flashing at Sub-Atmopsheric Pressure with a Multi-Regime Approach

  • Clément Loiseau,
  • Stéphane Mimouni,
  • Didier Colmont and
  • Stéphane Vincent

28 April 2023

The CFD numerical study of the flash boiling phenomenon of a water film was conducted using an Euler–Euler method, and compared to the experiments on the flashing of a water film. The water film is initially heated at temperatures ranging from...

(This article belongs to the Special Issue Advances in Numerical Methods for Multiphase Flows, Volume II)
  • Article
  • Open Access
4 Citations
3,300 Views
15 Pages

Safety Analysis on the Heating Surfaces in the 660 MW Ultra-Supercritical CFB Boiler under Sudden Electricity Failure

  • Boyu Deng,
  • Tuo Zhou,
  • Shuangming Zhang,
  • Haowen Wu and ,
  • Xiaoguo Jiang,
  • Man Zhang and
  • Hairui Yang
  • + 2 authors+ 0 author

27 October 2022

Ultra-supercritical circulating fluidized bed (CFB) boilers are taking up an increasing proportion of the CFB boiler fleet in China, making the safety concern about the heating surfaces in this type of boilers under sudden electricity failure draw mo...

(This article belongs to the Special Issue New Frontiers in Circulating Fluidized Bed Boiler and Thermal Power Plant)
  • Article
  • Open Access
2 Citations
1,754 Views
15 Pages

15 December 2023

Diagnosing steam pipelines is crucial because they are subjected to a water vapor environment and exhaust gases. Layers of oxides/deposits formed on steel utilized at elevated temperatures for long time periods have a significant impact on elements o...

  • Article
  • Open Access
15 Citations
3,536 Views
12 Pages

15 October 2020

Besides the widely applied hydropower, wind farms and solar energy, biomass and municipal and industrial waste are increasingly becoming important sources of renewable energy. Nevertheless, fouling, slagging and corrosion associated with the combusti...

(This article belongs to the Special Issue Future Maintenance Management in Renewable Energies)
  • Article
  • Open Access
9 Citations
2,940 Views
19 Pages

Structural Stability of the SUPER304H Steel Used in Energetics

  • Lucie Pilsová,
  • Jakub Horváth and
  • Vladimír Mára

7 January 2022

This paper describes the influence of technological treatments (i.e., bending or welding) on the structural stability of SUPER304H austenitic steel used in reheaters and superheaters in fossil fuel power plants. Although the worldwide trend is transi...

(This article belongs to the Special Issue Heat Treatment of Metallic Materials in Modern Industry)
  • Article
  • Open Access
6 Citations
4,162 Views
13 Pages

18 October 2018

The metallurgical performances in a mold cavity were investigated using a conventional bilateral-port nozzle or a swirling flow nozzle (SFN) plus with in-mold electromagnetic stirring (M-EMS) for bloom continuous casting (CC) process. To this end, a...

  • Article
  • Open Access
14 Citations
8,139 Views
11 Pages

Induction Skull Melting of Ti-6Al-4V: Process Control and Efficiency Optimization

  • Xabier Chamorro,
  • Nuria Herrero-Dorca,
  • Daniel Bernal and
  • Iñaki Hurtado

10 May 2019

Titanium investment casting is one of the leading and most efficient near-net-shape manufacturing processes, since complex shape components are possible to obtain with a very low amount of material waste. But melting these reactive alloys implies the...

(This article belongs to the Special Issue New Processes and Machine Tools for Advanced Metal Alloys)
  • Feature Paper
  • Article
  • Open Access
1 Citations
497 Views
26 Pages

4 August 2026

The evaluation of heat transfer in a back-pass channel for an industrial circulating fluidized bed (CFB) reactor was studied. The authors proposed a heat transfer model taking into account (i) convective heat transfer on the tube side, (ii) convectiv...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
374 Views
24 Pages

9 September 2026

This study aims to provide essential data for the optimal design of a transcritical CO2 water-cooled heat pump system utilizing an internal heat exchanger (IHX). To investigate cycle and application characteristics, a heat pump test rig consisting of...

(This article belongs to the Section J2: Thermodynamics)
  • Article
  • Open Access
5 Citations
3,701 Views
20 Pages

30 July 2024

The present investigation focuses on enhancing the efficiency of a vapor compression refrigeration system (VCRS) by proposing a Multiple Input Multiple Output (MIMO) control strategy based on the evaporator’s two-phase length and superheat temp...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
1 Citations
1,015 Views
25 Pages

8 October 2025

The Organic Rankine Cycle (ORC) offers an efficient approach for harnessing low-grade thermal energy. However, ORC systems often struggle to achieve maximum output power when subject to fluctuations in sink and heat source temperatures. To address th...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
2 Citations
1,244 Views
27 Pages

Data-Driven High-Temperature Superheater Wall Temperature Prediction Using Polar Lights Optimized Kolmogorov–Arnold Networks

  • Zhiqian He,
  • Yuhan Wang,
  • Guangmin Yang,
  • Chen Han and ,
  • Jia Gao,
  • Shiming Xu,
  • Ge Yin,
  • Xuefeng Tian,
  • Zhi Wang and
  • Xianyong Peng
  • + 5 authors+ 0 author

20 November 2025

The flexible operation of coal-fired boilers poses significant challenges to thermal safety, particularly due to delayed responses in wall temperature under variable load conditions, which may lead to overheating risks and reduced equipment lifespan....

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
5 Citations
3,155 Views
27 Pages

6 January 2025

This research proposes integrating a combined system from a supercritical Brayton cycle (SBC) at extremely high temperatures and pressures and a conventional ORC cycle. The ORC cycle was evaluated with three working fluids: acetone, toluene, and cycl...

(This article belongs to the Section A2: Solar Energy and Photovoltaic Systems)
  • Article
  • Open Access
1 Citations
3,016 Views
22 Pages

Thermodynamic Analysis of Nuclear Power Plants with External Steam Superheating

  • Vladimir Kindra,
  • Mikhail Ostrovsky,
  • Igor Maksimov,
  • Roman Zuikin and
  • Nikolay Rogalev

30 April 2025

Increasing the efficiency and capacity of nuclear power units is a promising direction for the development of power generation systems. Unlike thermal power plants, nuclear power plants operate at relatively low temperatures of the steam working flui...

(This article belongs to the Section B4: Nuclear Energy)
  • Article
  • Open Access
3 Citations
3,656 Views
24 Pages

23 March 2021

Requirements of modern process and power technologies for compact and highly efficient equipment for transferring large heat fluxes lead to designing these apparatuses as dense parallel flow systems, ranging from conventional to minichannel dimension...

(This article belongs to the Special Issue Heat and Mass Transfer Issues in Mini Gaps)
  • Article
  • Open Access
3 Citations
2,323 Views
26 Pages

11 June 2024

In the technical literature examining P92 steel grade, a common material used for elements of power equipment with enhanced operating parameters, there are numerous studies on creep tests. However, there is a lack of information on the fatigue proces...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
2 Citations
3,229 Views
14 Pages

11 July 2018

The purpose of the present study is to analyze pressure difference changes inside a high-temperature steam generator (HTSG), which produces steam using the heat generated by waste incineration and decreases the pressure of the produced steam while in...

of 5