Using a ray tracing model, acoustic propagation through a subsurface eddy is investigated. The eddy with a 460 km diameter lies at approximately 23° N, 126° E. The presence of the subsurface eddy is found to result in significant alterations...
Deep subsurface defect detection (due to the so-called skin effect) and sensitivity in the detection of any orientation defects remain two of the main challenges in Eddy Current Testing (ECT). Although low-frequency excitation increases the penetrati...
A corrosive environment leaves in-service conductive structures prone to subsurface corrosion which poses a severe threat to the structural integrity. It is indispensable to detect and quantitatively evaluate subsurface corrosion via non-destructive...
Mesoscale eddies induce significant variations in the temperature and salinity of the upper ocean, thereby exerting a substantial impact on sound propagation. Specifically, they can form or dissipate surface sound channels (SCs) and subsurface sound...
In this study, we investigated the impacts of typhoons on the transformation of anticyclonic eddies (AEs) into subsurface anticyclonic eddies (SAEs) in the northwestern subtropical Pacific Ocean (NWSP) based on an ocean reanalysis product and multipl...
The subsurface chlorophyll maximum depth (SCMD) is an indicator of the spatial activity of marine organisms and changes in the ecological environment. Ubiquitous mesoscale eddies are among the important factors regulating the Kuroshio–Oyashio c...
Pore and crack formation in parts produced by additive manufacturing (AM) processes, such as laser powder bed fusion, is one of the issues associated with AM technology. Surface and subsurface cracks and pores are induced during the printing process,...
The present study introduces a comprehensive, open-access atlas of mesoscale eddies in the global ocean, as identified and tracked by the TOEddies algorithm implemented on a global scale. Unlike existing atlases, TOEddies detects eddies directly from...
Additive Manufacturing (AM) Direct Laser Fabrication (DLF) of Ti-5Al-5V-5Mo-3Cr (Ti5553) is being developed as a method for producing aircraft components. The additive manufacturing process can produce flaws near the surface, such as porosity and mat...
In this work, a known Eddy Current (EC) model is adapted to characterize subsurface defects in carbon fiber-reinforced polymer (CFRP) plates intended for the civil aerospace industry. The considered defects include delaminations, microcracks, porosit...
To address the limitations of traditional analytical models in characterising multi-core coupling effects and the excessive computational cost of finite element simulations, this paper presents a high-precision analytical model for a novel T-II compo...
Mesoscale eddies are common in global oceans, playing crucial roles in ocean dynamics, ocean circulation, and heat transport, and their vertical structures can affect the water layers from tens to thousands of meters. In this study, we integrated sea...
By using multiplatform satellite datasets, Argo observations and numerical model data, the upper ocean thermodynamic responses to Super Typhoon Soudelor are investigated with a focus on the impact of an ocean cyclonic eddy (CE). In addition to the si...
A cyclonic ocean eddy (COE) exhibited an extraordinarily prolonged response to sequential typhoons Hinnamnor (1 September 2022) and Muifa (11 September 2022), reaching its peak strength 20 days post-typhoon (1 October 2022), almost double the typical...
This study examines the 3D attributes of submesoscale eddies identified over a 12-month period within the Western Pacific Ocean. Composite parameters of cyclonic submesoscale eddies (CSMEs) occurring within and away from the Kuroshio Current system a...
Conventional wisdom about mesoscale eddies is that cyclonic (anticyclonic) eddies are commonly associated with cold(warm) surface cores. Nevertheless, plenties of surface warm cyclonic eddies (WCEs) and cold anticyclonic eddies (CAEs) in the North Pa...
We have investigated the surface and subsurface submesoscale dynamics in the Gulf of Aden and the Gulf of Oman. Our results are based on the analyses of regional numerical simulations performed with a primitive equation model (HYCOM) at submesoscale...
Salinity extremes (SEs) play a crucial role in marine ecosystems, ocean circulation, and climate variability. Understanding their distribution and drivers is essential for predicting changes in ocean salinity under climate change, particularly in dyn...
Typhoon passages typically induce significant upper-ocean responses, especially on the right side of the typhoon track. However, how mesoscale eddies modulate this left–right asymmetry remains insufficiently understood. Using high-resolution re...
This paper investigates the evolution of global eddies and various types of eddies originating from baroclinic instability (BCI) by utilizing satellite altimetry, Argo profiles, and climatology datasets. The structure of global eddies with regard to...
The evolution of mesoscale eddies in the Bay of Bengal (BoB) and their characteristics (number of eddies, radius, amplitude, and eddy kinetic energy) are addressed during all strong, normal, and weak monsoon regimes from 1993 to 2019. Their impacts o...
The Kuroshio Extension (KE) System exhibits highly energetic mesoscale phenomena, but the impact of mesoscale eddies on marine ecosystems and biogeochemical cycling is not well understood. This study utilizes remote sensing and Argo floats to investi...
Oceanic mesoscale eddies are a kind of typical geostrophic dynamic process which can cause vertical movement in water bodies, thereby changing the temperature, salinity, density, and chlorophyll concentration of the surface water in the eddy. Based o...
Vigorous mesoscale eddies are broadly distributed in the Kuroshio Extension and can generally be identified from sea surface height (SSH) and sea surface temperature (SST) fields. Nevertheless, the changes in SSH and SST caused by mesoscale eddies an...
The ocean circulation in the Western Pacific is crucial for climate regulation and marine ecosystems, but reconstructing 3D subsurface currents remains challenging due to limited observations. This study presents SpadeUp, a novel deep learning model...
This paper presents an automated Non-Destructive Testing (NDT) system for the in-service inspection of orbital welds on tubular components operating at temperatures as high as 200 °C. The combination of two different NDT methods and respective in...
Knowledge of mesoscale eddies in the Bay of Bengal (BOB) is key for further understanding the climate variability in this region and beyond, but little is known about the vertical structure of these eddies. In this study, the three−dimensional...
A high-resolution (∼500 m) numerical model was used to study the reef and atoll wakes in the Xisha Archipelago (XA) during 2009. Statistical analyses of simulation data indicated strong cyclonic dominance in the mixing layer (above ∼35 m) and...
The majority of catastrophic wheelset failures are caused by surface opening fatigue cracks in either the wheel tread or wheel inner. Since failures in railway wheelsets can cause disasters, regular inspections to check for defects in wheels and axle...
Eddy current testing (ECT) is a crucial non-destructive testing (NDT) technique extensively used across various industries to detect surface and sub-surface defects in conductive materials. This review explores the latest advancements and methodologi...
Based on Argo observations and a coupled atmosphere–ocean–wave model, the upper ocean responses to the tropical cyclone (TC) Mekunu (2018) were investigated, and the role of a pre-existing cold eddy in modulating the temperature response...
Submesoscale eddies strongly regulate upper-ocean physical–biological interactions, yet their ecological impacts remain poorly observed because conventional satellite measurements lack sufficient spatial resolution. Here, we combine Surface Wat...
In the Arabian Sea, southeast of the Arabian peninsula, an oceanic dipole, named the Ras Al Hadd (RAH) dipole, is formed each year, lying near the Ras Al Hadd cape. The RAH dipole is the association of a cyclonic eddy (CE) to the northeast, with an a...
Under global warming, the South China Sea (SCS) is experiencing increasingly severe marine heatwaves (MHWs), with impacts on marine ecosystems such as coral reefs and marine pastures becoming more evident. The numerous anticyclonic eddies (AEs) distr...
The large variations in salinity at the salinity maximum in the northern South China Sea (NSCS), as an indicator for the changes in the Kuroshio intrusion (KI), play an important role in the hydrological cycle. The high salinity here is more than 34....
In this study, different eddy-current based probe designs (absolute and commercial reflection) are used to detect artificial defects with different sizes and at different depths in parts composed of stainless-steel (316) and titanium (TI-64) made by...
Increasing the efficiency, frequency, and speed of rail defect detection can reduce maintenance costs and improve the sustainability of railways. The non-contact eddy current (EC) system can be operated along with a railcar for detecting rail flaws....
A high-resolution numerical model called Delft3D (5 km resolution) forced with realistic high-frequency atmospheric conditions was set up to describe the circulation pattern in the Red Sea basin. The validation of the model was performed considering...
Ocean processes can locally modify the upper ocean density structure, leading to an attenuation or a deflection of sound signals. Among these phenomena, eddies cause significant changes in acoustic properties of the ocean; this suggests a possible ch...
The upper-ocean physical and biochemical responses to sequential tropical cyclones (TCs) Kyarr and Maha in the Arabian Sea (AS) were investigated using data from satellites and Bio-Argo floats. Corresponding to slow and strong sequential TCs, two coo...
The present study is aimed to investigate sub-surface ocean processes and their contribution to the intensification of a tropical cyclone (TC) from a coupled-modeling perspective. The Coupled Ocean–Atmosphere–Wave–Sediment Transport...
Evapotranspiration (ET) and sensible heat (H) flux play a critical role in climate change; micrometeorology; atmospheric investigations; and related studies. They are two of the driving variables in climate impact(s) and hydrologic balance dynamics....
This paper presents an eddy current approach for testing, estimating, and classifying CFRP plate sub-surface defects, mainly due to delamination, through specific 2D magnetic induction field amplitude maps. These maps, showing marked fuzziness conten...
Accurately and timely estimating three-dimensional ocean states is crucial for improving operational ocean forecasting capabilities. Although satellite observations provide valuable evolutionary information, they are confined to surface-level variabl...
In this study, two cruises were conducted across the mainstream of the Kuroshio off eastern Taiwan before and after the passage of Typhoon Saola in summer 2012. The continuous underway pCO2 (i.e., partial pressure of CO2) measurements revealed that s...
In this paper, we investigate pulsed eddy current (PEC) testing based on a rectangular sensor for the purpose of defect shape mapping in electric vehicle lightweight alloy material. Different dimensional defects were machined on the 3003 aluminum all...
The fatigue behavior of components made of quenched and tempered steel alloys is of elementary importance, especially in the automotive industry. To a great extent, the components’ fatigue strength is influenced by the surface integrity properties. F...
The Eddy Covariance station provides observations of agrometeorological variables and surface energy fluxes, collected from 2019 to 2022, in a citrus orchard located in the Souss-Massa plain, Morocco. The present dataset comprises measurements record...
Mesoscale sea surface temperature (SST) variability triggers mesoscale air–sea interactions and is linked to ocean subsurface mesoscale dynamics. The National Oceanic and Atmospheric Administration (NOAA) daily Optimum Interpolation SST (OISST)...
A number of computer experiments have investigated the effectiveness in terms of accuracy of the method for simultaneously determining the distributions of electrical conductivity and magnetic permeability in the subsurface zone of planar conductive...
of 2