114 Results Found

Nanoparticle properties are correlated to their size, size distribution, and shape; it is essential to accurately measure these features in the field of nanoscience. In this study, silver nanoparticles (AgNPs) were synthesized with the ultrasonic-spr...

Mesoporous bioactive glass (MBG) has a high specific surface area, promoting the reaction area, thereby improving the bioactivity; thus, MBG is currently gaining popularity in the biomaterial field. Spray pyrolysis (SP) is a one-pot process that has...

Flame spray pyrolysis (FSP) is an industrially scalable technology that enables the engineering of a wide range of metal-based nanomaterials with tailored properties nanoparticles. In the present review, we discuss the recent state-of-the-art advance...

This work employed a design-of-experiments (DoE) strategy, specifically a 23 full factorial design, to assess how suspension concentration (0.001–0.002 g/mL), substrate temperature (60–80 °C), and deposition height (10–15 cm) in...

This study focused on the deposition of indium-doped zinc oxide (IZO) films at high growth rates by ultrasonic spray pyrolysis. We investigated the influence of processing parameters, such as temperature and solution flow rate, on the structural, opt...

In the field of synthesis and processing of noble metal nanoparticles, the study of the bottom-up method, called Ultrasonic Spray Pyrolysis (USP), is becoming increasingly important. This review analyses briefly the features of USP, to underline the...

Nanostructured zinc oxide (ZnO) particles were synthesized by the one step Ultrasonic Spray Pyrolysis (USP) process from nitrate salt solution (Zn(NO3)2·6H2O). Various influential parameters, from Zn(NO3)2·6H2O concentrations (0.01875&n...

Metal-oxide-semiconductor (MOS)-based thin-film transistors (TFTs) are gaining significant attention in the field of flexible electronics due to their desirable electrical properties, such as high field-effect mobility (μFE), lower IOFF, and excel...

Here, we report the high-performance amorphous gallium indium tin oxide (a-IGTO) thin-film transistor (TFT) with zirconium aluminum oxide (ZAO) gate insulator by spray pyrolysis. The Ga ratio in the IGTO precursor solution varied up to 20%. The spray...

With the continuous growth in the optoelectronic industry, the demand for novel and highly efficient materials is also growing. Specifically, the demand for the key component of several optoelectronic devices, i.e., transparent conducting oxides (TCO...

Spray pyrolysis of an aqueous solution of iron nitrate, proceeded with reduction of the product in hydrogen, gave iron powder with micron-sized hollow particles. Coating these iron particles with SiO2 through tetraethyl orthosilicate hydrolysis preve...

Flame spray pyrolysis, widely used in chemical industries, is a technology to synthesize nanoparticles. While the flame spray pyrolysis uses fuels as a solution liquid, the flame-assisted spray pyrolysis method uses aqueous solutions. Since process p...

The spray pyrolysis technique has been extensively used to synthesize materials for a wide variety of applications such as micro and sub-micrometer dimension MOSFET´s for integrated circuits technology, light emitting devices for displays, and...

Noble metal-TiO2 nanohybrids, NM0-TiO2, (NM0 = Pt0, Pd0, Au0, Ag0) have been engineered by One-Nozzle Flame Spray Pyrolysis (ON-FSP) and Double-Nozzle Flame Spray Pyrolysis (DN-FSP), by controlling the method of noble metal deposition to the TiO2 mat...

Solution-based metal oxide semiconductors (MOSs) have emerged, with their potential for low-cost and low-temperature processability preserving their intrinsic properties of high optical transparency and high carrier mobility. In particular, MOS field...

Tungsten oxide (WO3) is prepared by a low-temperature ultrasonic spray pyrolysis method in air atmosphere, and it is used as an anode buffer layer (ABL) for organic solar cells (OSCs). The properties of the WO3 transition metal oxide material as well...

Zinc oxide (ZnO) coatings have various unique properties and are often used in applications such as transparent conductive films in photovoltaic systems. This study developed an atmospheric-pressure microplasma-enhanced ultrasonic spray pyrolysis sys...

The treatment of organic waste from dyes or other industry processes is a crucial issue that requires urgent attention. Photocatalysis is a promising method for tackling this problem, with ZnO being a commonly used photocatalyst material. This study...

Solid waste presents a very large problem in the developed world. Waste plastics, which make up a large part of solid waste, have high energy value, which is discarded if they are not treated properly. Most of the plastic found in solid waste is prod...

Silica has sparked strong interest in hydrometallurgy, catalysis, the cement industry, and paper coating. The synthesis of silica particles was performed at 900 °C using the ultrasonic spray pyrolysis (USP) method. Ideally, spherical particles are ob...

In order to study the role of metal sodium in the spray pyrolysis of biomass tar, this paper designs a sodium-containing naphthalene pyrolysis system (NSS) and a pure naphthalene pyrolysis system (PNS) using naphthalene as the carbon source and sodiu...

The article discusses the results of experimental studies on the course of pyrolysis oil injection through the high-pressure injector of a direct-injection engine. The pyrolysis oil used for the tests was derived from waste plastics (mainly high-dens...

Conventional carbon black production occurs by pyrolysis after heavy aromatic feedstock is injected into the post-combustor region of furnace black reactors. The current work examines the conversion of the coal tar distillate in turbulent spray flame...

Engineering of oxygen vacancies (Vo) in nanomaterials allows diligent control of their physicochemical properties. SrTiO3 possesses the typical ABO3 structure and has attracted considerable attention among the titanates due to its chemical stability...

Experimental studies of the steam pyrolysis of oil sludge were performed using a flow-type pilot plant with 300 kg/h capacity (raw material) to obtain energy-valuable products, such as liquid hydrocarbons (30.4 wt%), semi-coke (39.6 wt%), non-condens...

Silicon anodes present a high theoretical capacity of 4200 mAh/g, positioning them as strong contenders for improving the performance of lithium-ion batteries. Despite their potential, the practical application of Si anodes is constrained by their si...

Electrochromism induces reversible changes of coloration in specific organic and inorganic materials through electrical charge/discharge reactions. When processed into thin films, electrochromic metal oxides can be integrated into glazing application...

A novel manufacturing process is presented for producing nanopowders and thin films of CuCoO2 (CCO) material. This process utilizes three cost-effective synthesis methods: hydrothermal, sol-gel, and solid-state reactions. The resulting delafossite Cu...

Surface photovoltage (SPV) spectroscopy is a powerful tool for studying electronic defects on semiconductor surfaces, at interfaces, and in bulk for a wide range of materials. Undoped and Cobalt-doped TiO2 (CTO) thin films were deposited on Crystalli...

Lignocellulosic biomass pyrolysis could be an economically feasible option for forest management as it reduces the need to burn litter and helps in fire prevention thus avoiding the release of carbon dioxide and other greenhouse gases into the atmosp...

Fast pyrolysis of biomass is a well-known opportunity for sustainable alternative fuel production for transport and energy. However, bio-oils from biomass pyrolysis are viscous, acidic bio-crudes that need further steps of upgrading before being used...

Pyrolysis is a thermochemical conversion process producing biochar, gas, and bio-oil at high temperatures in an oxygen-free environment. Specific pyrolysis conditions enable a significant production of the aqueous phase of bio-oil, commonly known as...

A flexible transparent heater is presented, based on an all-sprayed composite architecture of indium-doped zinc oxide (IZO) layers that sandwich a network of silver nanowires, on a polyimide-foil substrate. This architecture could be materialized thr...

Pyrolysis is already an established recycling method to recover the carbon fibers of end-of-life composites. However, the pyrolysis process removes the fiber sizing. Fiber sizing is a critical step in composite material production, influencing adhesi...

Neodymium iron boron magnets (NdFeB) play a critical role in various technological applications due to their outstanding magnetic properties, such as high maximum energy product, high remanence and high coercivity. Production of NdFeB is expected to...

The presented paper addresses two significant issues of the present time. In general, the studies of the effect of synthetic fuels on cavitation formation and cavitation erosion prediction in the nozzle tip of common-rail diesel injectors were addres...

This work describes the spray pyrolysis deposition of PbSe films, using as-prepared PbSe colloids as the starting solution. The PbSe colloids were prepared by using the alkahest approach, where Pb and Se precursors were made to react with the followi...

The development of sensors that can monitor ultraviolet radiation has many implications for daily life, and even more so if the focus is on low-cost solution processes and the use of eco-friendly materials. In this study, we produced a UV-sensor base...

A series of Zn1−xMgxO thin films with x ranging from 0 to 0.8 were prepared by spin coating and aerosol spray pyrolysis deposition on Si and quartz substrates. The morphology, composition, nano-crystalline structure, and optical and vibration p...

Thin transparent films of SnO2 were obtained from aqueous–alcohol solutions of SnCl4 on a flexible polyethylene terephthalate (PET) substrate by spray pyrolysis at 100 °C. The influence of the addition of aqueous ammonia to the film-forming...

The article discusses the modern achievements in the field of thermal recovery of industrial and municipal waste. The average accumulation rate and calorific value of typical wastes were analyzed. The focus is on the opportunities to exploit the ener...

In this paper, a series of graded Al-based composites, including Al@AP, Al@AP/BM−52, and Al@AP/BPE−1735, have been prepared by spray drying technology. The thermal decomposition characteristics, kinetic parameters of the decomposition reaction, and P...

Submicron and nanosized powders have gained significant attention in recent decades due to their broad applicability in various fields. This work focuses on ultrasonic spray pyrolysis, an efficient and flexible method that employs an aerosol process...

The present work investigates the physicochemical stability of spray paints when irradiated with artificial solar light (at spectral range 300–800 nm). This research highlights the importance of understanding the materials used in street art an...

Multi-nanowire based chemical gas sensors were produced employing a fast and simple transfer printing technology. SnO2 nanowires (NWs) were grown by a specific two-step technology including spray pyrolysis deposition and a thermal annealing process i...

Current challenges in the areas of health care, environmental protection, and, especially, the mobility transition have introduced a wide range of applications for specialized high-performance materials. Hence, this paper presents a novel approach fo...

Solution precursor plasma spray (SPPS) is a novel and promising technique in producing nanostructured coatings. This technique involves complex heat, mass and momentum transfer among the liquid feedstock, droplets, plasma jet and the coating material...

This research reports on Vis- and solar-active photocatalytic bi-layered films of TiO2 (layer 1) and a composite with TiO2 matrix and graphene oxide or reduced graphene oxide filler (layer 2) obtained by coupling two methods: spray pyrolysis depositi...

Bioactive glass (BG) is considered to be one of the most remarkable materials in the field of bone tissue regeneration due to its superior bioactivity. In this study, both un-treated and polyethylene glycols (PEG)-treated BG particles were prepared u...

Pure and Ce-doped TiO2 nanoparticles were successfully synthesized in one step by means of the scalable flame spray pyrolysis (FSP) process. Complete structural and chemical characterization of these materials revealed that the majority of the nanopa...