Skip to Content

1,164 Results Found

  • Systematic Review
  • Open Access
212 Citations
19,475 Views
40 Pages

Physical and Mechanical Properties of 3D-Printed Provisional Crowns and Fixed Dental Prosthesis Resins Compared to CAD/CAM Milled and Conventional Provisional Resins: A Systematic Review and Meta-Analysis

  • Saurabh Jain,
  • Mohammed E. Sayed,
  • Mallika Shetty,
  • Saeed M. Alqahtani and ,
  • Mohammed Hussain Dafer Al Wadei,
  • Shilpi Gilra Gupta,
  • Ahlam Abdulsalam Ahmed Othman,
  • Abdulkarim Hussain Alshehri,
  • Hatem Alqarni and
  • Moayad F. Sheayria
  • + 10 authors+ 5 authors

30 June 2022

Newly introduced provisional crowns and fixed dental prostheses (FDP) materials should exhibit good physical and mechanical properties necessary to serve the purpose of their fabrication. The aim of this systematic literature review and meta-analysis...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Review
  • Open Access
54 Citations
11,653 Views
9 Pages

PEEK Biomaterial in Long-Term Provisional Implant Restorations: A Review

  • Suphachai Suphangul,
  • Dinesh Rokaya,
  • Chatruethai Kanchanasobhana,
  • Pimduen Rungsiyakull and
  • Pisaisit Chaijareenont

Polyetheretherketone (PEEK) has become a useful polymeric biomaterial due to its superior properties and has been increasingly used in dentistry, especially in prosthetic dentistry and dental implantology. Promising applications of PEEK in dentistry...

(This article belongs to the Special Issue Recent Advances in Dental Implants and Biomaterials)
  • Review
  • Open Access
43 Citations
10,550 Views
33 Pages

Marginal Adaptation and Internal Fit of 3D-Printed Provisional Crowns and Fixed Dental Prosthesis Resins Compared to CAD/CAM-Milled and Conventional Provisional Resins: A Systematic Review and Meta-Analysis

  • Mohammed Hussain Dafer Al Wadei,
  • Mohammed E. Sayed,
  • Saurabh Jain,
  • Aparna Aggarwal and ,
  • Hatem Alqarni,
  • Shilpi Gilra Gupta,
  • Saeed M. Alqahtani,
  • Nasser M. Alahmari,
  • Abdullah Hasan Alshehri and
  • Mafaz M. Gharawi
  • + 10 authors+ 5 authors

20 November 2022

The aim of this systematic review was to evaluate the marginal fit and internal adaptation of provisional crowns and fixed dental prostheses (FDPs) fabricated using 3D-printing resins and compared them with those fabricated by CAD/CAM (computer-aided...

(This article belongs to the Section Surface Coatings for Biomedicine and Bioengineering)
  • Article
  • Open Access
33 Citations
4,744 Views
15 Pages

Hybrid AC/DC Provisional Microgrid Planning Model Considering Converter Aging

  • Omid Rezaei,
  • Omid Mirzapour,
  • Mohammad Panahazari and
  • Hassan Gholami

Renewable energy deployment through distributed energy resources is among the central goals of future power systems. Microgrids have proven to be an economically viable solution for distributed energy resources’ integration into the power syste...

  • Article
  • Open Access
13 Citations
5,167 Views
16 Pages

11 April 2019

Limited evidence is available comparing the differences between pre-operative and post-operative 3D implant positions from the viewpoint of prosthetics. We aimed to investigate the differences between preplanned positions of virtual provisional resto...

(This article belongs to the Special Issue Implant Dentistry—Trends, Challenges and Innovations)
  • Article
  • Open Access
1 Citations
1,502 Views
20 Pages

Influence of Sandblasting Particle Size on the Shear Bond Strength of Orthodontic Brackets to Milled and 3D-Printed Provisional Crowns or Materials After Artificial Aging

  • Khurshid Mattoo,
  • Mohammed E. Sayed,
  • Marwan Someli,
  • Ahmed Alhazmi and ,
  • Mohammed Khawajy,
  • Shroog A. Almasoudi,
  • Ebrahim Fihaid Alsubaiy,
  • Saeed M. Alqahtani,
  • Mohammed A. Alfaifi and
  • Raghdah M. Alshaibani
  • + 5 authors+ 0 author

8 December 2025

Purpose: This in vitro study ascertained the impact of three distinct alumina particle sizes on the shear bond strength (SBS) between two distinct provisional crowns (milled and 3D-printed) and stainless-steel orthodontic brackets following artificia...

(This article belongs to the Section Dental Biomaterials)
  • Systematic Review
  • Open Access
22 Citations
5,737 Views
29 Pages

Three-dimensional printing is commonly used to fabricate provisional dental restorations. Studies have reported that changes in printing orientation affect the physical and mechanical properties of 3D-printed polymeric provisional restorations; howev...

(This article belongs to the Special Issue Advances in Restorative Dentistry Materials)
  • Case Report
  • Open Access
1,486 Views
10 Pages

Background: Elderly patients often experience difficulty adapting to occlusal reconstruction. Therefore, accurate bite registration is mandatory to ensure precise transfer of the established maxillomandibular relationship to the definitive prosthesis...

(This article belongs to the Special Issue Biomimetics and Digital Workflows in Prosthodontics: Innovations, Materials, and Patient-Centered Outcomes)
  • Article
  • Open Access
7 Citations
2,485 Views
11 Pages

Comparative Analysis of Fluorescent Characteristics of Different Provisional Restorative Materials for Improved Dental Esthetics

  • Pitchaya Aneksomboonpol,
  • Awiruth Klaisiri,
  • Awutsadaporn Katheng,
  • Katanyoo Limchaikul and ,
  • Papichaya Intajak,
  • Nuttaphon Kittikundecha and
  • Wisarut Prawatvatchara
  • + 2 authors+ 0 author

16 November 2024

At present, provisional restorative materials are widely used for both short- and long-term treatment purposes. In esthetic dentistry, for the simulation of natural teeth, fluorescence plays a crucial role in enhancing the elegant, vibrant, and life-...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
15 Citations
4,654 Views
11 Pages

25 April 2025

Background: The quality of a provisional restoration, especially its color and marginal integrity, can play a critical role in its survival and overall patient satisfaction. This study aims to evaluate the color stability and marginal fit differences...

(This article belongs to the Special Issue New Trends in Digital Dentistry)
  • Article
  • Open Access
1 Citations
3,072 Views
10 Pages

4 August 2021

Purpose: In this study, we aimed to compare the marginal fit of fixed dental restorations fabricated with the provisional prosthesis scanning technique versus a conventional impression technique and to determine the effect of both variables on the ac...

(This article belongs to the Special Issue Computer Technologies in Oral and Maxillofacial Surgery)
  • Article
  • Open Access
1,245 Views
22 Pages

Effect of Graphene Oxide on the Acid Resistance of 3D-Printed Provisional Restorations Under Simulated Gastroesophageal Reflux Conditions

  • Khanaphan Lebkrut,
  • Atikom Surintanasarn,
  • Tool Sriamporn,
  • Awiruth Klaisiri and ,
  • Taweesak Boonsod,
  • Supachai Yanarueng,
  • Kanoktip Boonkerd and
  • Niyom Thamrongananskul
  • + 3 authors+ 0 author

1 April 2026

Recurrent acidic exposure in patients with gastroesophageal reflux disease (GERD) accelerates the degradation of provisional restorative materials, whereas approaches to enhance the acid resistance of 3D-printed restorations remain inadequately chara...

(This article belongs to the Special Issue Advanced Polymers for Dental Applications)
  • Case Report
  • Open Access
1 Citations
10,227 Views
21 Pages

Immediate Implant Placement and Provisionalization in the Esthetic Zone Revisited: The Marginal Migration Concept (MMC)

  • Konstantinos Valavanis,
  • Ioannis Vergoullis,
  • Michalis Papastamos and
  • Henry Salama

15 December 2020

Immediate implant placement and provisionalization in the esthetic zone is a desirable approach that presents several advantages but at the same time embosses several risk factors that can lead to sever esthetic complications. The purpose of this art...

(This article belongs to the Special Issue Material Science, Implants, and Peri-Implant Tissues)
  • Article
  • Open Access
8 Citations
3,291 Views
17 Pages

Novel Antibacterial Resin Coating for Dental Provisional Crowns to Suppress Biofilms and Inhibit Secondary Caries

  • Ibrahim Ba-Armah,
  • Mohammad Alenizy,
  • Nader Almutairi,
  • Heba Alqarni and ,
  • Abdullah Alhussein,
  • Radi Masri,
  • Gary D. Hack,
  • Thomas W. Oates,
  • Jirun Sun and
  • Hockin H. K. Xu
  • + 6 authors+ 1 author

28 October 2024

Provisional crowns are often used in dentistry for prolonged periods, but bacterial attachment and dental plaque often lead to gingival inflammation and secondary caries. The aims of this research were to develop a novel resin-based antibacterial pro...

  • Article
  • Open Access
5 Citations
4,827 Views
14 Pages

The Effect of the Digital Manufacturing Technique, Preparation Taper, and Cement Type on the Retention of Aged Anterior Provisional Crowns: An In Vitro Study

  • Honey Lunkad,
  • Mohammed E. Sayed,
  • Abdullah Essa Alhazmi,
  • Bandar Alwadani and ,
  • Ameen Marwei Shafei,
  • Muath Naji Ayoub,
  • Maan Mohammed A. Shabi,
  • Sara Ahmad Mesawa,
  • Basmah Alhassan Abdulfatah and
  • Saurabh Jain
  • + 10 authors+ 5 authors

11 December 2022

A well-made provisional fixed prosthesis must present as a preview of the future prosthesis and may also augment the health of the abutments and periodontium. Provisional restorations have been prepared chairside with polymethyl methacrylate (PMMA) s...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
553 Views
14 Pages

Effect of Fiber and Metal Reinforcement on the Flexural Properties of Printed and Conventional Provisional Restorative Materials

  • João Carlos Ramos,
  • Gabriela Almeida,
  • Francisco Silva,
  • Neila Gani and ,
  • Ana Messias and
  • Alexandra Vinagre
  • + 1 author+ 0 author

22 June 2026

(1) Background: Provisional restorations play a crucial role in maintaining oral function and must exhibit adequate mechanical properties, particularly fracture resistance, to ensure structural integrity throughout the provisional phase. The aim of t...

(This article belongs to the Special Issue Polymers for Dental Applications: From New Materials and Processes to Clinical Translation)
  • Article
  • Open Access
13 Citations
3,361 Views
10 Pages

2 February 2023

Background: The aim of this study was to find the best surface treatment for CAD/CAM provisional crowns allowing the optimal bond strength of metal brackets. Methods: The sample consists of 30 lower bicuspids and 180 provisional crowns. The provision...

(This article belongs to the Special Issue Orthodontics and New Technologies)
  • Article
  • Open Access
8 Citations
4,596 Views
11 Pages

12 July 2021

The aim of this research was too compare the thickness change of labial contour and bone tissues, as well as some biological complications of immediate implantation with and without immediate provisionalization for a single anterior maxilla presentin...

(This article belongs to the Special Issue Novel Biomaterials and Technology for Dental Clinical Applications)
  • Article
  • Open Access
3 Citations
1,905 Views
15 Pages

Comparative Evaluation of Color Stability and Fracture Resistance of CAD/CAM and Chairside Provisional Restorations: An In Vitro Study

  • Florina Titihazan,
  • Ioana Veja,
  • Cristian Zaharia,
  • Tareq Hajaj and ,
  • Cosmin Sinescu,
  • George Dumitru Constantin and
  • Mihai Rominu
  • + 2 authors+ 0 author

20 November 2025

Background and Objectives: Provisional restorations are essential in fixed prosthodontics, ensuring esthetics, function, and biological protection during treatment. Recent advances in CAD/CAM technologies have enabled the fabrication of provisional m...

(This article belongs to the Special Issue Advances in Restorative Dentistry Materials)
  • Article
  • Open Access
42 Citations
8,457 Views
15 Pages

22 January 2021

Different techniques have been used to construct provisional crowns to protect prepared teeth. The purpose of this in vitro study was to assess the internal fit and marginal discrepancy of provisional crowns made by different methods. A total of 48 p...

(This article belongs to the Special Issue Sensing and Imaging Technology in Dentistry)
  • Article
  • Open Access
10 Citations
2,532 Views
11 Pages

Influence of Popular Beverages on the Fracture Resistance of Implant-Supported Bis-Acrylic Resin Provisional Crowns: An In Vitro Study

  • Oriana Karolina Ribera,
  • José Manuel Mendes,
  • Joana Mendes,
  • Pedro Barreiros and ,
  • Carlos Aroso and
  • António Sérgio Silva
  • + 1 author+ 0 author

15 August 2023

Implant-supported provisional restorations are critical for improving the esthetics and shaping of the peri-implant tissue. The mechanical properties of these provisional materials can be influenced by saliva, food, beverages, and interactions betwee...

(This article belongs to the Special Issue Advanced Polymeric Materials for Dental Applications II)
  • Case Report
  • Open Access
3 Citations
3,710 Views
13 Pages

20 February 2025

Background: This case report addresses the challenges of integrating orthodontic and prosthodontic treatment, particularly in clear aligner cases. The study introduces a novel milled-provisional crown with attachment (M-PCA) technique designed to enh...

(This article belongs to the Special Issue Advancements in Prosthodontics: Exploring Innovations in Rehabilitation Medicine)
  • Article
  • Open Access
9 Citations
3,494 Views
15 Pages

Cell Type-Specific Effects of Implant Provisional Restoration Materials on the Growth and Function of Human Fibroblasts and Osteoblasts

  • Takanori Matsuura,
  • Keiji Komatsu,
  • Denny Chao,
  • Yu-Chun Lin and ,
  • Nimish Oberoi,
  • Kalie McCulloch,
  • James Cheng,
  • Daniela Orellana and
  • Takahiro Ogawa
  • + 4 authors+ 0 author

Implant provisional restorations should ideally be nontoxic to the contacting and adjacent tissues, create anatomical and biophysiological stability, and establish a soft tissue seal through interactions between prosthesis, soft tissue, and alveolar...

(This article belongs to the Special Issue Biomimetic Approach to Dental Implants)
  • Article
  • Open Access
4 Citations
3,818 Views
15 Pages

10 June 2025

This study aimed to evaluate the effect of different manufacturing techniques and thermal aging on the fracture resistance of provisional crowns and fixed partial dentures. Methods: A total of 60 provisional crowns and 60 provisional fixed partial de...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
2 Citations
1,795 Views
19 Pages

Proposal of a Protocol for the Safe Removal of Post-Earthquake Provisional Shorings

  • Marianna Rotilio,
  • Giulia D’Alberto,
  • Angelo Di Egidio,
  • Alessandro Contento and
  • Pierluigi De Berardinis

16 September 2023

The recent seismic events in Italy, including the earthquakes in L’Aquila in 2009 and central Italy in 2016, have significantly impacted the historical centers of small and medium-sized cities. These events directly affected their ancient mason...

(This article belongs to the Special Issue Seismic Design of Building Structures)
  • Article
  • Open Access
6 Citations
3,501 Views
6 Pages

Preliminary Study on the Assessment of the Marginal Fit of Three-Dimensional Methacrylate Oligomer Phosphine Oxide Provisional Fixed Dental Prostheses Made by Digital Light Processing

  • Pedro Molinero-Mourelle,
  • Miguel Gómez-Polo,
  • Cristina Gómez-Polo,
  • Rocio Ortega and ,
  • Jaime del Río Highsmith and
  • Alicia Celemín-Viñuela
  • + 1 author+ 0 author

7 September 2020

This article aimed to assess the marginal fit of methacrylate-oligomer-phosphine-oxide curable-resin provisional-fixed dental prostheses made by digital-light-processing (DLP) three-dimensional (3D) printing. A stainless-steel master model with two a...

  • Article
  • Open Access
6 Citations
3,306 Views
11 Pages

The Influence of Saliva pH on the Fracture Resistance of Two Types of Implant-Supported Bis-Acrylic Resin Provisional Crowns—An In Vitro Study

  • Sofia Sousa-Santos,
  • António Sérgio Silva,
  • Primavera Sousa-Santos,
  • Teresa Vale and
  • José Manuel Mendes

Temporary restorations play a fundamental role in oral rehabilitation. A properly adapted implant-supported provisional restoration implies better esthetics, contouring and architectural modeling of the upper peri-implant tissue. This study aimed to...

(This article belongs to the Section Dental Biomaterials)
  • Article
  • Open Access
19 Citations
6,296 Views
18 Pages

Nanocomposite Provisional Resin: Effect of Nanoparticles Addition on the Physical Properties and Antimicrobial Activities In Vitro

  • Faris A. Alshahrani,
  • Maher AlGhamdi,
  • Deena Alghamdi,
  • Hend Alshammary and ,
  • Sultan Akhtar,
  • Soban Q. Khan,
  • Amr A. Mahrous,
  • Fawaz Alzoubi,
  • Abdel-Naser M. Emam and
  • Mohammed M. Gad
  • + 5 authors+ 0 author

15 August 2024

Purpose: This in vitro study aimed to evaluate and compare the physical and antimicrobial properties of provisional resin modified with two different nanoparticles, namely, silicon dioxide (nano-SiO2) and titanium dioxide (nano-TiO2). Methods: A comm...

(This article belongs to the Special Issue Dental Ceramics and Restorative Materials in Prosthodontics: The New Frontier of the Digital Workflow)
  • Article
  • Open Access
12 Citations
6,578 Views
11 Pages

Comparative Evaluation of Flexural Strength of Four Different Types of Provisional Restoration Materials: An In Vitro Pilot Study

  • Hafsa Al Idrissi,
  • Lovely Muthiah Annamma,
  • Dalya Sharaf,
  • Ahmad Al Jaghsi and
  • Huda Abutayyem

15 February 2023

With provisional restorations, properties such as flexural strength play a key role in maintaining the abutment teeth in position over the interim period until the final restorations are placed. This study aimed to evaluate and compare the flexural s...

(This article belongs to the Special Issue Biomaterials and Biomechanics of Pediatric Dentistry)
  • Article
  • Open Access
2 Citations
3,603 Views
12 Pages

24 April 2023

Health and safety representatives (HSR) have the power to issue provisional improvement notices (PIN) to their employer for safety breaches. This paper examines how PINs influence workplace dynamics or employee voice. Semi-structured interviews were...

  • Article
  • Open Access
144 Views
23 Pages

Novel Antibacterial Coating Containing Dimethylaminohexadecyl Methacrylate for Provisional Dental Crowns: Physicomechanical Properties and Oral Biofilm Inhibition

  • Abdullah Alhussein,
  • Areej Alfaifi,
  • Nader Almutairi,
  • Saad H. Almujel and ,
  • Yazeed Altamimi,
  • Sarah Alghamdi,
  • Arwa Almusa,
  • Jirun Sun,
  • Thamer Almohareb and
  • Hockin H. K. Xu
  • + 6 authors+ 1 author

18 November 2026

Provisional crown restorations are commonly used in dentistry, but they often accumulate oral plaques, leading to gingival inflammation and recurrent caries. This study aimed to develop a photo-cured antibacterial coating containing dimethylaminohexa...

(This article belongs to the Topic Advances in Biomaterials—2nd Edition)
  • Article
  • Open Access
13 Citations
8,743 Views
12 Pages

15 April 2015

This study concerned the effect of heat treatment during setting on the physical properties of four resin-based provisional restorative materials: Duralay (polymethyl methacrylate), Trim II (polyethyl methacrylate), Luxatemp (bis-acrylic composite)...

  • Article
  • Open Access
4 Citations
2,584 Views
19 Pages

Exploring Flexural Strength Variation in Polymeric Materials for Provisional Fixed Prosthetic Structures: Comparative Analysis with and without Reinforcement through Laboratory Experimentation and Statistical Evaluation

  • Mariana Dimova-Gabrovska,
  • Todor Uzunov,
  • Angela Gusiyska,
  • Dobromira Shopova and ,
  • Iva Taneva,
  • Ivan Gerdzhikov and
  • Stefan Rangelov
  • + 2 authors+ 0 author

4 May 2024

Provisional fixed partial dentures represent a critical phase in dental treatment, necessitating heightened mechanical durability, particularly in comprehensive and extended treatment plans. Strengthening these structures with various reinforcing mat...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
1 Citations
1,980 Views
14 Pages

This study evaluated the effects of different provisional luting cement removal methods on the shear bond strength (SBS) of resin cement to dentin following immediate dentin sealing (IDS) performed with two adhesive systems. A total of 168 extracted,...

(This article belongs to the Section Dental Biomaterials)
  • Article
  • Open Access
15 Citations
4,560 Views
16 Pages

Hippocampal Volume in Provisional Tic Disorder Predicts Tic Severity at 12-Month Follow-up

  • Soyoung Kim,
  • Deanna J. Greene,
  • Carolina Badke D’Andrea,
  • Emily C. Bihun and ,
  • Jonathan M. Koller,
  • Bridget O’Reilly,
  • Bradley L. Schlaggar and
  • Kevin J. Black
  • + 3 authors+ 0 author

Previous studies have investigated differences in the volumes of subcortical structures (e.g., caudate nucleus, putamen, thalamus, amygdala, and hippocampus) between individuals with and without Tourette syndrome (TS), as well as the relationships be...

(This article belongs to the Section Mental Health)
  • Article
  • Open Access
346 Views
14 Pages

2 October 2026

The optical stability and surface characteristics of provisional restorative materials are important during extended provisionalization. This in vitro study compared five commercially available provisional restorative materials exposed to five coffee...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Systematic Review
  • Open Access
8 Citations
11,528 Views
12 Pages

The “Epulis” Dilemma. Considerations from Provisional to Final Diagnosis. A Systematic Review

  • Paola Costa,
  • Matteo Peditto,
  • Antonia Marcianò,
  • Antonio Barresi and
  • Giacomo Oteri

5 August 2021

“Epulis” is a widely used term to describe a localized gingival enlargement. However, a wide range of neoformations might present as localized, slow-growing, asymptomatic gingival masses. A systematic review was conducted to outline the pathological...

  • Case Report
  • Open Access
4 Citations
8,230 Views
8 Pages

28 March 2019

This report describes the case of a patient who required rehabilitation of their maxillary anterior teeth following a traumatic injury through a physical altercation. The decision was made to extract the maxillary central incisors and maxillary right...

(This article belongs to the Special Issue Implant Dentistry—Trends, Challenges and Innovations)
  • Article
  • Open Access
9 Citations
4,340 Views
9 Pages

Comparison of Fracture Strengths of Three Provisional Prosthodontic CAD/CAM Materials: Laboratory Fatigue Tests

  • José Manuel Mendes,
  • Pedro Colaço Botelho,
  • Joana Mendes,
  • Pedro Barreiros and ,
  • Carlos Aroso and
  • António Sérgio Silva
  • + 1 author+ 0 author

14 October 2021

Temporary restorations play a fundamental role in oral rehabilitation. They can be used on teeth or implants for a variable period of time during the period prior to rehabilitation with definitive restorations. Temporary or provisional restorations m...

  • Article
  • Open Access
369 Views
20 Pages

Current Clinical Practices and Digital Technology Adoption in Provisional Prosthodontics: A Cross-Sectional Survey Among Romanian Dental Practitioners

  • George Ion,
  • Ştefan Milicescu,
  • Ștefan-Dimitrie Albu,
  • Dan Alexandru Slăvescu and ,
  • Cristina-Crenguţa Albu and
  • Claudia Florina Bogdan-Andreescu
  • + 1 author+ 0 author

6 August 2026

Background/Objectives: Provisional restorations are essential for maintaining oral function, esthetics, periodontal health, and patient comfort during prosthodontic treatment. This study evaluated current clinical practices, material preferences, fab...

  • Article
  • Open Access
10 Citations
4,111 Views
15 Pages

Comparison of Various Surface Treatment Procedures on the Roughness and Susceptibility to Staining of Provisional Prosthodontic Materials

  • Satheesh B. Haralur,
  • Abdullah Turki Albarqi,
  • Abdulellah Gharmallah Alamodi,
  • Abdulmajeed Ali Alamri and ,
  • Saad Awdah Aldail,
  • Mohammed A. Al-Qarni,
  • Saeed M. AlQahtani and
  • Nasser M. Alqahtani
  • + 3 authors+ 0 author

3 September 2024

Esthetically pleasing temporary prostheses are often necessary for extended periods in a variety of clinical scenarios. Adjustments to the occlusion or margins are commonly needed before cementing the temporary prosthesis. Therefore, it is clinically...

(This article belongs to the Special Issue Ceramic, Zirconia, and Resin-Based Composite for Restorative Dentistry)
  • Article
  • Open Access
4 Citations
3,084 Views
13 Pages

Effect of Mechanical Surface Treatment on Shear Bond Strength of Orthodontic Brackets to 3D Printed and Milled CAD/CAM Provisional Materials: An In Vitro Study

  • Abdulaziz A. Alzaid,
  • Khalid K. Alanazi,
  • Lulu A. Alyahya,
  • Maha N. Alharbi and ,
  • Hatem Alqarni,
  • Mohammed Alsaloum,
  • Hayam A. Alfallaj and
  • Ghada S. Alotaibi
  • + 3 authors+ 0 author

25 November 2024

The aim of the study is to assess the impact of mechanical surface treatments on the shear bond strength (SBS) of orthodontic brackets bonded to three-dimensional (3D) printed and milled CAD/CAM provisional materials. Sixty cylindrical samples were f...

(This article belongs to the Special Issue Biomechanical Studies and Biomaterials in Dentistry)
  • Article
  • Open Access
1,163 Views
13 Pages

Impact of Post-Curing Exposure Time on the Dimensional Fidelity of 3D-Printed Provisional Crowns: A Root Mean Square (RMS) Evaluation

  • Miruna Andreea Anghel,
  • Ioana Mitruț,
  • Mihaela Ionescu,
  • Alexandru Andrei Iliescu and ,
  • Petre Costin Mărășescu,
  • Cristian Zaharia and
  • Horia Octavian Manolea
  • + 2 authors+ 0 author

Background: Dimensional stability during post-curing exposure time is critical for the clinical success of 3D-printed restorations. This study evaluates how different post-curing protocols affect the accuracy of provisional crowns. Methods: Fifty-fou...

(This article belongs to the Special Issue Advanced Biomaterials for Oral Rehabilitation)
  • Article
  • Open Access
1 Citations
1,441 Views
22 Pages

Development of Remineralizing and Antibacterial Resin Coating for Provisional Crowns with Improved Bond Strength and Wear Resistance

  • Ibrahim Ba-Armah,
  • Abdullah Alhussein,
  • Nader Almutairi,
  • Mohammad Alenizy and ,
  • Heba Alqarni,
  • Yazeed Altamimi,
  • Ayman Altamimi,
  • Radi Masri,
  • Jirun Sun and
  • Hockin H. K. Xu
  • + 6 authors+ 1 author

12 April 2026

Secondary caries and biofilm accumulation remain major causes of failure in provisional crowns and restorations, highlighting the need for multifunctional resin coatings with antibacterial and remineralizing capabilities. This study aimed to develop...

(This article belongs to the Special Issue Functional Polymeric Materials for Dental and Oral and Maxillofacial Surgery Applications)
  • Article
  • Open Access
371 Views
17 Pages

Chairside Repair of Provisional Restorative Materials: Effects of Material Type, Repair Protocol, and Thermocycling on Shear Bond Strength

  • Milan Stoilov,
  • Rebecca Maria Krüger,
  • Michael Marder,
  • Helmut Stark and ,
  • Norbert Enkling and
  • Dominik Kraus
  • + 1 author+ 0 author

4 September 2026

(1) Background: Repairing fractured provisional restorations may avoid refabrication, but success depends on substrate chemistry, repair protocol, and aging. This study evaluated shear bond strength (SBS) and failure behavior after chairside repair o...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
152 Views
12 Pages

3 November 2026

Provisional restorative materials can be fabricated using conventional, subtractive, and additive manufacturing techniques; however, evidence regarding the combined effects of artificial aging and beverage exposure on the surface characteristics of t...

(This article belongs to the Special Issue Functional Polymeric Materials for Dental and Oral and Maxillofacial Surgery Applications (2nd Edition))
  • Article
  • Open Access
18 Citations
3,619 Views
19 Pages

Shear Strength of Repaired 3D-Printed and Milled Provisional Materials Using Different Resin Materials with and without Chemical and Mechanical Surface Treatment

  • Harisha Dewan,
  • Mohammed E. Sayed,
  • Asayil Jundus,
  • Mafaz Gharawi and ,
  • Safeyah Baeshen,
  • Maimonah Alali,
  • Mai Almarzouki,
  • Hossam F. Jokhadar,
  • Saad Saleh AlResayes and
  • Alkhansa Moafa
  • + 8 authors+ 3 authors

31 October 2023

The aim of this study was to assess the shear bond strength of 3D-printed and milled provisional restorations using various resin materials and surface finishes. There were 160 preliminary samples in all, and they were split into two groups: the mill...

(This article belongs to the Special Issue Overviews on the Progress of Polymeric Materials for Dental Applications II)
  • Article
  • Open Access
9 Citations
3,576 Views
17 Pages

Disparity in the Influence of Implant Provisional Materials on Human Gingival Fibroblasts with Different Phases of Cell Settlement: An In Vitro Study

  • Takanori Matsuura,
  • Stella Stavrou,
  • Keiji Komatsu,
  • James Cheng and ,
  • Alisa Pham,
  • Stephany Ferreira,
  • Tomomi Baba,
  • Ting-Ling Chang,
  • Denny Chao and
  • Takahiro Ogawa
  • + 5 authors+ 0 author

21 December 2023

The development of healthy peri-implant soft tissues is critical to achieving the esthetic and biological success of implant restorations throughout all stages of healing and tissue maturation, starting with provisionalization. The purpose of this st...

(This article belongs to the Special Issue Recent Process Design and Development Strategies for Dental Materials)
  • Review
  • Open Access
66 Citations
8,723 Views
63 Pages

Three-Dimensional Printing Resin-Based Dental Provisional Crowns and Bridges: Recent Progress in Properties, Applications, and Perspectives

  • Xiaoxu Liang,
  • Biao Yu,
  • Yuan Dai,
  • Yueyang Wang and ,
  • Mingye Hu,
  • Hai-Jing Zhong and
  • Jingwei He
  • + 2 authors+ 0 author

10 May 2025

Three-dimensional (3D) printing represents a pivotal technological advancement in dental prosthetics, fundamentally transforming the fabrication of provisional crowns and bridges through innovative vat photopolymerization methodologies, specifically...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
16 Citations
5,063 Views
11 Pages

Bond Strength of Reline Materials to 3D-Printed Provisional Crown Resins

  • Jorge Palavicini,
  • Sherrod L. Quin,
  • Wael Zakkour,
  • Karim Zakkour and ,
  • Safa Manafi Varkiani,
  • Xiaoming Xu,
  • Nathaniel C. Lawson and
  • Amir Hossein Nejat
  • + 3 authors+ 0 author

13 September 2023

(1) Purpose: The aim of the present study was to compare the bond strength between two 3D-printed resins designed for long-term provisional crowns and three different reline materials. (2) Materials and Methods: Rectangular specimens were prepared fr...

(This article belongs to the Special Issue Polymers in Restorative Dentistry)

of 24