The development of solvent-free methods for the synthesis of catalysts is one of the main tasks of green chemistry. A nickel–alumina catalyst for CO2 methanation was synthesized by solid-state combustion method using hexakis-(imidazole) nickel (II) n...
In order to study the sulfidation of a catalyst fixed bed, an in operando single pellet sensor was designed. A catalyst pellet from the fixed bed was electrically contacted and its electrical response was correlated with the catalyst behavior. For th...
In the present work, we studied the catalytic performance of an oil-soluble nickel-based catalyst during aquathermolysis of oil-saturated crushed cores from Boca de Jaruco extra-heavy oil field. The decomposition of nickel tallate and some aspects of...
Fluid catalytic cracking (FCC) is still a key process in the modern refining area, in which nickel-contamination for an FCC catalyst could obviously increase the dry gas and coke yields and thus seriously affect the stability of the FCC unit. From th...
The synthesis of polar functionalized cyclic olefin copolymers (COCs) from the coordination copolymerization of norbornene (NB) and polar monomers catalyzed by late transition metal catalysts has been a recent research hotspot. However, few catalysts...
Catalysts based on electroless nickel and bi-metallic nickel-molybdenum nanoparticles were synthesized for the hydrolysis of sodium borohydride for hydrogen generation. The catalysts were synthesized by polymer-stabilized Pd nanoparticle-catalyzation...
Dechlorination processes attract great interest since they are involved in environmental protection and waste disposal technologies. In this paper, the process of gas-phase dechlorination of 1,2-dichloroethane, chloroform, and chlorobenzene over Ni/A...
KIT-6 silica with well-ordered three–dimensional (3D) mesopores has been synthesized as a support for nickel-based catalysts. Transmission Electron Microscopy (TEM) and low-angle X-ray Diffraction (XRD) analysis are used to ensure that the orde...
As an extension of chemical looping combustion, chemical looping steam reforming (CLSR) has been developed for H2 production. During CLSR, a steam reforming (SR) process occurs following the reduction of catalysts by the reforming feedstock itself (t...
This paper investigates aquathermolysis of heavy oil in carbonate reservoir rocks from Boca de Jaruco, which is developed by the cyclic steam stimulation method. The nickel-based catalyst precursor was introduced in order to intensify the conversion...
The valorization of greenhouse gases, especially when focused on carbon dioxide, currently belongs to the main challenges of pro-environmental chemical processes. One of the important technologies in this field is dry methane reforming (DMR), leading...
A clean straightforward laser ablation method in deionized (DI) water is reported for the synthesis of Molybdenum (Mo) and Nickel (Ni) nanoparticles (NPs). The structural, morphological, and optical properties of the as-synthesized nanoparticles were...
In this work, we applied commercially available 2-pyridinecarboxylic acid to modify cellulose by simple manipulations, and then anchored low-toxicity metal nickel onto the modified cellulose to prepare the heterogeneous catalyst (CL-AcPy-Ni). The obt...
Magnesium nickel silicate (MNS) has been investigated as a catalyst to convert tars and light hydrocarbons to syngas (CO and H2) by steam reforming and CO2 reforming in the presence of H2S for biomass gasification process at NexTech Materials. It was...
In the present paper, we compare the activity, selectivity, and stability of a supported nickel catalyst in classical heating conditions and in magnetically activated catalysis by using iron wool as a heating agent. The catalyst, 5 wt% Ni supported o...
The homopolymerization of norbornene and the copolymerization of norbornene and ethylene were carried out using the neutral α-sulfonate-β-diimine nickel catalyst SD-Ni. The neutral α-sulfonate-β-diimine catalyst is highly active...
With the increasing demand for clean energy, in-situ hydrogen production from hydrocarbon reservoirs has attracted increasing attention. In this work, a nanoscale nickel catalyst was prepared using the water-in-oil (w/o) microemulsion method and appl...
The monitoring of environmental contamination is an important issue to protect human health and the atmospheric environment. In this study, the optical imaging of mesh structures not coated and coated with platinum was performed to analyze the optica...
The dry reforming of methane (DRM) was studied for seven hours at 800 °C and 42 L/(g·h) gas hourly space velocity over Ni-based catalysts, promoted with various amounts of gadolinium oxide (x = 0.0, 1.0, 2.0, 3.0, 4.0, and 5.0 wt.%) and su...
Canola oil was hydrogenated on an industrial nickel catalyst at 180 °C under a wide range of pressures from 1.5 to 21 bar(a). The effect of hydrogen pressure on the hydrogenation characteristics and fatty acids profile was investigated. The hydrogena...
The catalyst in methanol oxidation plays a pivotal role in direct fuel cell reaction. The aim of this work is to study the influence of polypyrrole polymer (PPy) added in the carbon Vulcan support for the methanol oxidation reaction. The catalytic ac...
Nickel-cobalt spinel catalyst (NCO) is a promising catalyst for air oxidation of humic acid, which is a typical natural refractory organic matter and a precursor of toxic disinfection by-products. In this study, reductive etchers, NaBH4 or Na2SO3, we...
We fabricated one fibrous-membrane type of flexible and lightweight supported catalyst via loading platinum–nickel nanoparticles (PtNi NPs) directly on the polydopamine-coated polymethylmethacrylate electrospun-fibers (PMMA@PDA). The polymer su...
In the Fischer–Tropsch (FT) synthesis, a mixture of CO and H2 is converted into hydrocarbons and water with diluted organics. This water fraction with oxygenated hydrocarbons can be processed through aqueous-phase reforming (APR) to produce H2....
Biomass can be considered a renewable energy source. It undergoes a gasification process to obtain gaseous fuel, which converts it into combustible gaseous products such as hydrogen, carbon monoxide, and methane. The process also generates undesirabl...
Biomass gasification gas contains hydrocarbons that must be converted to CO and H2 prior to the utilization of the gas in a synthesis unit. Autothermal or steam reforming operating with a nickel or noble metal catalyst is a feasible option to treat t...
A series of NiP-x/Al2O3 catalysts containing different ratio of metallic nickel to nickel phosphides, prepared by varying Ni/P molar ratio of 4, 3, 2 through a co-impregnation method, were employed to investigate the synergistic effect of metallic ni...
Changes in the structural and textural properties of NiAl-layered double hydroxides (LDHs) (with 2–4 molar ratios of metals) and state of nickel that occur in different steps of the synthesis of nickel catalysts were studied using XRD, thermal...
Late transition metal olefin polymerization catalysts have received more attention in the field of catalytic olefin polymerization. Barrelene-based α-diimine nickel and palladium olefin polymerization catalysts are rising stars because of their...
The present work studies the adsorption of ethylene on Ni-H-Beta particles to unravel the roles of nickel and Brønsted sites in the catalytic oligomerization of ethylene. Three models (i.e., two based on the Cossee–Arlman mechanism and o...
The less-expensive and earth-abundant nickel catalyst is highly promising in the copolymerization of ethylene with polar monomers and has thus attracted increasing attention in both industry and academia. Herein, we have summarized the recent advance...
Nickel catalysts with carbon-mineral supports derived from sapropel were synthesized; the effect exerted by the nature of the support (type of the initial sapropel) and active component precursor on the activity of the catalysts in the model reaction...
Binuclear α-diimine nickel catalysts have attracted significant interest in ethylene polymerization due to their distinctive metal–metal cooperativity, which enables catalytic properties not achievable with mononuclear systems. This revie...
The conversion of CH4 and CO2 to syngas using low-cost nickel catalysts has attracted considerable interest in the clean energy and environment field. Nickel nanoparticles catalysts suffer from serious deactivation due mainly to carbon deposition. He...
In this work, carbon-supported nickel catalysts with different Ni content (1, 2.5, 5, 10, and 20 wt%) were tested in the oxidation of alpha-pinene in solvent-free reaction conditions. The process of catalyst preparation consisted of two stages. In th...
The solid-state combustion method was used to prepare nickel-based catalysts for CO2 hydrogenation from [Ni(C3H4N2)6](NO3)2 and [Ni(C3H4N2)6](ClO4)2. These complexes were synthesized by adding nickel nitrate and perchlorate to melted imidazole. The c...
This work investigated the influence of the catalytic support precursor on the activity of nickel catalysts 20%Ni/5%La2O3–95%Al2O3 in the mixed methane reforming process. The activity tests were carried out at a temperature of 750 °C. The r...
In the present work, natural mordenite originated from volcanic soils in Greek islands, activated using HCl solution and HCl solution followed by NaOH solution, was used as support for preparing two metallic nickel catalysts (30 wt.% Ni). The catalys...
The direct copolymerization of ethylene with polar monomers to produce functional polyolefins continues to be highly appealing due to its simple operation process and controllable product microstructure. Low-cost nickel catalysts have been extensivel...
Four nickel-based catalysts are synthesized by wet impregnation and evaluated for the hydrotreatment/hydrodeoxygenation of beech wood fast-pyrolysis bio-oil. Parameters such as elemental analysis, pH value, and water content, as well as the heating v...
The electrochemical urea oxidation reaction (UOR) is crucial for determining industrial and commercial applications of urea-based energy conversion devices. However, the performance of UOR is limited by the dynamic complex of the six-electron transfe...
The main goal of this work was to determine the role of copper in bimetallic nickel–copper BEA zeolite catalysts prepared by sequential impregnation and co-impregnation, as well as defining the influence of the method of impregnation on the cat...
A detailed critical analysis of the scientific literature data concerning catalysts for CO2 methanation based on nickel supported over oxides was performed. According to the obtained information, it seems that an ionic support is necessary to allow a...
Efficient and cost-effective catalysts for hydrogen evolution reaction (HER) are essential for large-scale hydrogen production, which is a critical step toward reducing carbon emissions and advancing the global transition to sustainable energy. Nicke...
A technology designed for recycling photovoltaic (PV) cells at the end of their life was successfully used for the preparation of a nickel silicide catalyst. PV cells were mixed with magnesium scrap to produce magnesium silicide (Mg2Si), with almost...
Controlling molecular catalyst speciation under reaction conditions can be an effective approach for extending catalyst lifetimes and controlling selectivity. Anchoring molecular catalysts to solid supports, to generate hybrid catalysts, is a means f...
Lignocellulosic biomass such as canola straw is produced as low-value residue from the canola processing industry. Its high cellulose and hemicellulose content makes it a suitable candidate for the production of hydrogen via supercritical water gasif...
Different nickel catalysts have been tested for the transformation of levulinic acid into γ-valerolactone using an easy hydrothermal method, taking advantage of the properties of the high temperature water. A metallic nickel catalyst derived fr...
The transformation of sunflower oil (SO) and waste cooking oil (WCO) into green diesel over co-precipitated nickel–zirconia catalysts was studied. Two series of catalysts were prepared. The first series included catalysts with various Ni loadin...
In this study, a series of novel nickel catalysts supported on reduced graphene oxide nanosheets (Ni/rGO) with Ni loadings of 10, 15 and 20 wt% were successfully synthesized via the incipient wetness impregnation method. The physicochemical propertie...
of 24