Skip to Content

1,883 Results Found

  • Article
  • Open Access
12 Citations
3,045 Views
11 Pages

Experimental Study of the Microhardness and Microstructure of a Copper Specimen Using the Taylor Impact Test

  • Sergey A. Zelepugin,
  • Nadezhda V. Pakhnutova,
  • Olga A. Shkoda and
  • Evgenii N. Boyangin

19 December 2022

One commonly used method for characterizing the dynamic characteristics of materials is the Taylor impact test. This method measures the dynamic yield strength of cylindrical specimens and determines material model constants required for the numerica...

  • Article
  • Open Access
5 Citations
5,552 Views
20 Pages

Testing and Analysis of Uniaxial Mechanical Fatigue, Charpy Impact Fracture Energy and Microhardness of Two Low-Carbon Steels

  • Josip Brnic,
  • Sebastian Balos,
  • Marino Brcic,
  • Miroslav Dramicanin and ,
  • Sanjin Krscanski,
  • Mladomir Milutinovic,
  • Biao Ding and
  • Zeng Gao
  • + 3 authors+ 0 author

16 January 2023

The paper presents and analyzes the results of experimental tests performed on two non-alloy low carbon steels (1.1141 and 1.0122) in cases of their exposure to impact fracture energy and uniaxial high cyclic mechanical stress-controlled fatigue. The...

  • Article
  • Open Access
8 Citations
9,125 Views
18 Pages

Evaluation of the Depth of Cure by Microhardness of Bulk-Fill Composites with Monowave and Polywave LED Light-Curing Units

  • Socratis Thomaidis,
  • Dimitris Kampouropoulos,
  • Maria Antoniadou and
  • Afrodite Kakaboura

11 December 2024

This study aimed to evaluate the depth of cure (DoC) of bulk-fill composite resins, measured by the bottom-to-top Vickers microhardness ratio, using different light-curing units (LCUs): single-wave LED, polywave LED, and halogen. Six bulk-fill compos...

(This article belongs to the Special Issue Research on Restorative Dentistry and Dental Biomaterials)
  • Article
  • Open Access
641 Views
17 Pages

Analysis of the Fracture Toughness of ERCuAl A2 Cladding on API X70 Using the Instrumented Charpy Impact Test

  • Martín Aguirre-Pulido,
  • Francisco Fernando Curiel-López,
  • José Jaime Taha-Tijerina,
  • Jorge Alejandro Verduzco-Martínez and ,
  • Víctor Hugo López-Morelos,
  • Heriberto Granados-Becerra and
  • Ariosto Medina-Flores
  • + 2 authors+ 0 author

The degradation of steel used in the oil industry has become a serious problem due to the high costs associated with material loss from corrosion. Applying thin layers of corrosion-resistant material promises to be a viable alternative for extending...

(This article belongs to the Special Issue Advanced Welding Processes, Additive Manufacturing and Numerical Models: 2nd Edition)
  • Proceeding Paper
  • Open Access
4 Citations
2,735 Views
8 Pages

12 December 2023

This research focuses on analyzing the microstructural and mechanical characteristics of SS 347 and DSS 2205 stainless steel dissimilar welds. This is achieved by altering the weld parameters, welding current and heating cycle at three different leve...

(This article belongs to the Proceedings of Eng. Proc., 2023, RAiSE-2023)
  • Article
  • Open Access
27 Citations
7,156 Views
15 Pages

Qualification of a Ni–Cu Alloy for the Laser Powder Bed Fusion Process (LPBF): Its Microstructure and Mechanical Properties

  • Iris Raffeis,
  • Frank Adjei-Kyeremeh,
  • Uwe Vroomen,
  • Elmar Westhoff and ,
  • Sebastian Bremen,
  • Alexandru Hohoi and
  • Andreas Bührig-Polaczek
  • + 2 authors+ 0 author

14 May 2020

As researchers continue to seek the expansion of the material base for additive manufacturing, there is a need to focus attention on the Ni–Cu group of alloys which conventionally has wide industrial applications. In this work, the G-NiCu30Nb c...

(This article belongs to the Special Issue Materials Development by Additive Manufacturing Techniques)
  • Article
  • Open Access
4 Citations
3,765 Views
15 Pages

Evaluation of the Mechanical Properties of Different Dental Resin-Based Materials After Submersion in Acidic Beverages

  • Răzvan Constantin Brânzan,
  • Ionuț Tărăboanță,
  • Cristina Angela Ghiorghe,
  • Simona Stoleriu and ,
  • Vlad Cârlescu,
  • Andra Claudia Tărăboanță-Gamen and
  • Sorin Andrian
  • + 2 authors+ 0 author

25 December 2024

Background: The aim of this study was to evaluate the influence of acidic beverages on the mechanical properties of various dental resin-based materials. Methods: A total number of 160 samples were prepared using four types of resin-based materials&m...

(This article belongs to the Section Restorative Dentistry and Traumatology)
  • Article
  • Open Access
12 Citations
4,166 Views
9 Pages

Calcium Phosphate Nanoclusters for the Repair of Tooth Enamel Erosion

  • Chia-Hsien Wang,
  • Chinmaya Mutalik,
  • Sibidou Yougbaré,
  • Nai-Chia Teng and
  • Tsung-Rong Kuo

10 June 2022

The artificial repair of tooth enamel is still an urgent requirement because it has a complicated and well-arranged structure. Herein, calcium phosphate nanoclusters (CaP NCs) were synthesized, via a facile approach, for application in the repair of...

(This article belongs to the Special Issue Review of Nanocomposite Materials)
  • Article
  • Open Access
4 Citations
1,935 Views
13 Pages

27 June 2025

Aluminum alloys based on the eutectic Al–Ni system are a promising class of lightweight materials for applications at elevated temperatures owing to the thermal stability of the eutectic Al3Ni phase. In this study, the eutectic Al–Ni allo...

(This article belongs to the Special Issue Alloy Strengthening Mechanisms, Microstructure Control, and Performance Optimization)
  • Article
  • Open Access
2 Citations
2,873 Views
26 Pages

Titanium Carbide and Vibration Effect on the Structure and Mechanical Properties of Medium-Carbon Alloy Steel

  • Tatyana Kovalyova,
  • Yevgeniy Skvortsov,
  • Svetlana Kvon,
  • Michot Gerard and ,
  • Aristotle Issagulov,
  • Vitaliy Kulikov and
  • Anna Skvortsova
  • + 2 authors+ 0 author

22 June 2023

This study aimed to improve the hardness and wear behavior of medium-carbon alloy steel through the addition of titanium carbide ultradispersed powder and low-frequency vibration treatment during solidification. It was shown that the complex effect o...

(This article belongs to the Collection Feature Paper Collection in Corrosion, Wear and Erosion)
  • Article
  • Open Access
22 Citations
4,841 Views
15 Pages

Surface Analysis of 3D (SLM) Co–Cr–W Dental Metallic Materials

  • Elena-Raluca Baciu,
  • Ramona Cimpoeșu,
  • Anca Vițalariu,
  • Constantin Baciu and ,
  • Nicanor Cimpoeșu,
  • Alina Sodor,
  • Georgeta Zegan and
  • Alice Murariu
  • + 3 authors+ 0 author

29 December 2020

The surface condition of the materials involved in dentistry is significant for the subsequent operations that are applied in oral cavity. Samples of Co–Cr–W alloy, obtained through selective laser melting (SLM) 3D printing, with differen...

(This article belongs to the Special Issue Active Materials for Medical Applications)
  • Article
  • Open Access
121 Citations
8,980 Views
16 Pages

Sustainable Additive Manufacturing: Mechanical Response of Polyethylene Terephthalate Glycol over Multiple Recycling Processes

  • Nectarios Vidakis,
  • Markos Petousis,
  • Lazaros Tzounis,
  • Sotirios A. Grammatikos and ,
  • Emmanouil Porfyrakis,
  • Athena Maniadi and
  • Nikolaos Mountakis
  • + 2 authors+ 0 author

2 March 2021

The continuous demand for thermoplastic polymers in a great variety of applications, combined with an urgent need to minimize the quantity of waste for a balanced energy-from-waste strategy, has led to increasing scientific interest in developing new...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
42 Citations
5,212 Views
18 Pages

On the Mechanical Response of Silicon Dioxide Nanofiller Concentration on Fused Filament Fabrication 3D Printed Isotactic Polypropylene Nanocomposites

  • Nectarios Vidakis,
  • Markos Petousis,
  • Emmanouil Velidakis,
  • Lazaros Tzounis and ,
  • Nikolaos Mountakis,
  • Apostolos Korlos,
  • Peder Erik Fischer-Griffiths and
  • Sotirios Grammatikos
  • + 3 authors+ 0 author

21 June 2021

Utilization of advanced engineering thermoplastic materials in fused filament fabrication (FFF) 3D printing process is critical in expanding additive manufacturing (AM) applications. Polypropylene (PP) is a widely used thermoplastic material, while s...

(This article belongs to the Special Issue Polymers in Additive Manufacturing)
  • Article
  • Open Access
72 Citations
5,014 Views
17 Pages

Enhanced Mechanical, Thermal and Antimicrobial Properties of Additively Manufactured Polylactic Acid with Optimized Nano Silica Content

  • Nectarios Vidakis,
  • Markos Petousis,
  • Emanuel Velidakis,
  • Nikolaos Mountakis and ,
  • Lazaros Tzounis,
  • Marco Liebscher and
  • Sotirios A. Grammatikos
  • + 2 authors+ 0 author

15 April 2021

The scope of this work was to create, with melt mixing compounding process, novel nanocomposite filaments with enhanced properties that industry can benefit from, using commercially available materials, to enhance the performance of three-dimensional...

  • Article
  • Open Access
9 Citations
4,003 Views
13 Pages

The Evaluation of Laser Weldability of the Third-Generation Advanced High Strength Steel

  • António B. Pereira,
  • Rafael O. Santos,
  • Bruno S. Carvalho,
  • Marilena C. Butuc and ,
  • Gabriela Vincze and
  • Luciano P. Moreira
  • + 1 author+ 0 author

27 September 2019

To meet the demands of vehicular safety and greenhouse gas emission reduction, the automotive industry is increasingly using advanced high strength steels (AHSS) in the production of the components. With the development of the new generation of AHSS,...

  • Article
  • Open Access
65 Citations
5,782 Views
17 Pages

Optimization of the Filler Concentration on Fused Filament Fabrication 3D Printed Polypropylene with Titanium Dioxide Nanocomposites

  • Nectarios Vidakis,
  • Markos Petousis,
  • Emmanouil Velidakis,
  • Lazaros Tzounis and ,
  • Nikolaos Mountakis,
  • John Kechagias and
  • Sotirios Grammatikos
  • + 2 authors+ 0 author

4 June 2021

Polypropylene (PP) is an engineered thermoplastic polymer widely used in various applications. This work aims to enhance the properties of PP with the introduction of titanium dioxide (TiO2) nanoparticles (NPs) as nanofillers. Novel nanocomposite fil...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
5 Citations
4,377 Views
12 Pages

Laboratory Test Campaign Aimed at the Analysis of an Uncommon Wear Phenomenon in a Marble Quarry

  • Alfio Di Giovanni,
  • Carmine Todaro,
  • Marilena Cardu,
  • Stefano Bianchini and
  • Brunello Forfori

21 February 2022

The use of ornamental stones has a historical value that makes them strategically precious in Italy; marble can offer high performance in architectural applications, even though the variability of the rock mass requires detailed studies to optimize t...

(This article belongs to the Topic Sustainable Environmental Technologies)
  • Article
  • Open Access
17 Citations
4,838 Views
16 Pages

Conservation of Archaeological Bones: Assessment of Innovative Phosphate Consolidants in Comparison with Paraloid B72

  • Andrea Díaz-Cortés,
  • Gabriela Graziani,
  • Marco Boi,
  • Lucia López-Polín and
  • Enrico Sassoni

13 September 2022

Aqueous solutions of diammonium hydrogen phosphate (DAP) have been recently proposed for consolidation of archeological bones, as an alternative to traditional products. Here, we investigated several routes to improve the performance of the DAP-based...

(This article belongs to the Special Issue Applications of Calcium Phosphates-Based Nanostructured Materials and Coatings)
  • Article
  • Open Access
5 Citations
3,199 Views
13 Pages

20 December 2020

In this article, we presented the results of the tests performed on three sets of samples of glass-reinforced epoxy (GRE) core rods used in alternating current (AC) composite insulators with silicone rubber housing. The objective of this examination...

(This article belongs to the Special Issue High Voltage Insulating Materials-Current State and Prospects)
  • Feature Paper
  • Article
  • Open Access
18 Citations
8,884 Views
27 Pages

Descriptors for High Throughput in Structural Materials Development

  • Matthias Steinbacher,
  • Gabriela Alexe,
  • Michael Baune,
  • Ilya Bobrov and ,
  • Ingmar Bösing,
  • Brigitte Clausen,
  • Tobias Czotscher,
  • Jérémy Epp,
  • Andreas Fischer and
  • Nils Ellendt
  • + 14 authors+ 9 authors

5 December 2019

The development of novel structural materials with increasing mechanical requirements is a very resource-intense process if conventional methods are used. While there are high-throughput methods for the development of functional materials, this is no...

  • Article
  • Open Access
10 Citations
3,054 Views
26 Pages

23 June 2021

This work presents the results of the numerical and physical modelling of the hot torsion of a hardly deformable 5XXX series aluminium alloy. Studies were conducted on constrained torsion with the use of the STD 812 torsion plastometer. The main purp...

(This article belongs to the Special Issue Polish Achievements in Materials Science and Engineering)
  • Article
  • Open Access
127 Citations
7,830 Views
15 Pages

Sustainable Additive Manufacturing: Mechanical Response of Polyamide 12 over Multiple Recycling Processes

  • Nectarios Vidakis,
  • Markos Petousis,
  • Lazaros Tzounis,
  • Athena Maniadi and ,
  • Emmanouil Velidakis,
  • Nikolaos Mountakis and
  • John D. Kechagias
  • + 2 authors+ 0 author

19 January 2021

Plastic waste reduction and recycling through circular use has been critical nowadays, since there is an increasing demand for the production of plastic components based on different polymeric matrices in various applications. The most commonly used...

  • Proceeding Paper
  • Open Access
3 Citations
2,275 Views
10 Pages

26 October 2023

Sol-gel-derived coatings’ corrosion resistance and mechanical properties have been studied frequently in the literature individually. However, there is a limitation in the studies that consider both mutually, as is common in all sol-gel hybrid...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
6 Citations
3,671 Views
19 Pages

Influence of Copper Addition on the Mechanical Properties and Corrosion Resistance of Self-Hardening Secondary Aluminium Alloy AlZn10Si8Mg

  • Martin Mikolajčík,
  • Lenka Kuchariková,
  • Eva Tillová,
  • Jon Mikel Sanchez and ,
  • Zuzana Šurdová and
  • Mária Chalupová
  • + 1 author+ 0 author

30 June 2024

Aluminium alloys have a wide range of applications, mainly due to their advantageous strength-to-weight ratio, denoted as specific strength and corrosion resistance. In recent decades, there has been a notable surge in the usage of recycled alloys, a...

  • Article
  • Open Access
10 Citations
3,030 Views
18 Pages

12 April 2024

The prerequisite of the weld bead finishing is intricately linked to the quality of the welded joint. It constitutes the final, yet pivotal, stage in its formation, significantly influencing the reliability of structural components and machines. This...

(This article belongs to the Special Issue Manufacturing Technology: Materials, Innovations and Applications)
  • Article
  • Open Access
32 Citations
7,568 Views
14 Pages

Characterization of Electroless Ni–P Coating Prepared on a Wrought ZE10 Magnesium Alloy

  • Martin Buchtík,
  • Petr Kosár,
  • Jaromír Wasserbauer,
  • Jakub Tkacz and
  • Pavel Doležal

Electroless low-phosphorus Ni–P coating was deposited on a wrought ZE10 magnesium alloy including an advanced pre-treatment of the material surface before deposition. Uniform Ni–P coating with an average thickness of 10 µm was formed by 95.6 wt % Ni...

(This article belongs to the Special Issue New Generation Coatings for Metals)
  • Article
  • Open Access
4 Citations
2,701 Views
17 Pages

Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process

  • Andreja Carek,
  • Ljerka Slokar Benić,
  • Vatroslav Bubalo and
  • Nika Kosović

22 May 2023

Due to their good mechanical and other properties, cobalt-chromium alloys (Co-Cr) are often used in prosthetic therapy. The metal structures of prosthetic works can be damaged and break, and depending on the extent of the damage, they can be re-joine...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
7 Citations
2,681 Views
15 Pages

26 July 2023

This paper presents the results of tests of a new mono-component polyurethane coating for wood with the aim of evaluating its effect on Ayous (Triplochiton scleroxylon K. Schum), which is a wood species used in Europe for various applications, especi...

(This article belongs to the Special Issue Advances in Surface Modification and Coatings of Wood and Wood Composites)
  • Feature Paper
  • Article
  • Open Access
2 Citations
2,417 Views
15 Pages

Renovation of Crystallizer Surface Using Electrodeposited Alloy Coating to Increase High-Temperature Abrasion Resistance

  • Janette Brezinová,
  • Mária Hagarová,
  • Dagmar Jakubéczyová,
  • Gabriela Baranová and
  • Olegas Prentkovskis

13 October 2021

This paper deals with the evaluation of mechanical and tribological properties of Ni-Co galvanic coatings at elevated temperatures. The coatings were deposited on the copper surface, which in practice is the material of the crystallizer. Ni-Co coatin...

(This article belongs to the Special Issue Renovation of Parts to Save Metals)
  • Article
  • Open Access
1 Citations
3,980 Views
18 Pages

Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing

  • Andreja Carek,
  • Ljerka Slokar Benić,
  • Dino Buković and
  • Martina Šlaj

24 July 2023

In order to improve the hold and function of dentures for the patient, various prostheses made of metal, mostly metal alloys, are used every day in dental practise. Cobalt-chromium alloys are usually the first choice because they have very good mecha...

(This article belongs to the Section Biobased and Biodegradable Metals)
  • Article
  • Open Access
3 Citations
2,115 Views
17 Pages

26 June 2025

One major challenge of friction stir processing (FSP) is its sensitivity to parameters like advancing and rotational speeds. This study examined the effect of tool travel speed on the microstructural evolution and mechanical properties of a new-gener...

  • Article
  • Open Access
5 Citations
3,657 Views
21 Pages

30 June 2024

High-strength steel is a candidate material for offshore structures, which are currently being constructed with regular-strength steel. These structures are constantly exposed to harsh environmental conditions and experience cyclic loadings, which ca...

(This article belongs to the Special Issue Corrosion Phenomena in Metals)
  • Article
  • Open Access
9 Citations
3,274 Views
18 Pages

18 August 2022

The utility of polymers in the present decade is consistently increasing, giving scope to many applications from automobiles to prosthetics. Polymers used for solid free-form fabrication (SFFF), also known as 3D printing, comprise a quick fabrication...

(This article belongs to the Collection Progress in Polymer Composites and Nanocomposites)
  • Feature Paper
  • Article
  • Open Access
66 Citations
6,628 Views
15 Pages

Mechanical Performance of Fused Filament Fabricated and 3D-Printed Polycarbonate Polymer and Polycarbonate/Cellulose Nanofiber Nanocomposites

  • Nectarios Vidakis,
  • Markos Petousis,
  • Emmanouil Velidakis,
  • Mariza Spiridaki and
  • John D. Kechagias

18 November 2021

In this study, nanocomposites were fabricated with polycarbonate (PC) as the matrix material. Cellulose Nanofiber (CNF) at low filler loadings (0.5 wt.% and 1.0 wt.%) was used as the filler. Samples were produced using melt mixing extrusion with the...

(This article belongs to the Special Issue Sustainable High Performance Fiber-Reinforced Cementitious Composites (HPFRCCs) and Fiber-Reinforced Polymers (FRPs))
  • Article
  • Open Access
12 Citations
5,679 Views
18 Pages

Effect of Water Flow on Underwater Wet Welded A36 Steel

  • Eko Surojo,
  • Aziz Harya Gumilang,
  • Triyono Triyono,
  • Aditya Rio Prabowo and ,
  • Eko Prasetya Budiana and
  • Nurul Muhayat
  • + 1 author+ 0 author

21 April 2021

Underwater wet welding (UWW) combined with the shielded metal arc welding (SMAW) method has proven to be an effective way of permanently joining metals that can be performed in water. This research was conducted to determine the effect of water flow...

  • Article
  • Open Access
8 Citations
6,919 Views
16 Pages

Induction Weld Seam Characterization of Continuously Roll Formed TRIP690 Tubes

  • Alexander Bardelcik and
  • Bharathwaj Thirumalai Ananthapillai

25 March 2020

The weld seam characteristics of continuously roll formed and induction seam welded TRIP690 tubes were examined in this work. These tube are subsequently used in automotive hydroforming applications, where the weld seam characteristics are critical....

(This article belongs to the Special Issue Joining of Advanced High Strength Steels for the Automotive Industry)
  • Article
  • Open Access
20 Citations
7,469 Views
14 Pages

Mechanical Properties Changes of Irradiated Thermoplastic Elastomer

  • David Manas,
  • Ales Mizera,
  • Miroslav Manas,
  • Martin Ovsik and ,
  • Lenka Hylova,
  • Stanislav Sehnalek and
  • Pavel Stoklasek
  • + 2 authors+ 0 author

17 January 2018

Some polymers need a cross-linking agent for the controlled cross-linking process of polymers with a tendency to degradation during the radiation cross-linking process. While, on the other hand, other polymers do not need a cross-linking agent—predom...

(This article belongs to the Special Issue Elastomers)
  • Article
  • Open Access
14 Citations
4,677 Views
14 Pages

Effects of Electron Beam Irradiation on Mechanical and Tribological Properties of PEEK

  • Bayan Kurbanova,
  • Kazybek Aimaganbetov,
  • Kanat Ospanov,
  • Kairat Abdrakhmanov and ,
  • Nurkhat Zhakiyev,
  • Bauyrzhan Rakhadilov,
  • Zhuldyz Sagdoldina and
  • Nurlan Almas
  • + 3 authors+ 0 author

7 March 2023

In this work, the mechanical and tribological characteristics of polyetheretherketone (PEEK) sheets were enhanced by electron beam irradiation. PEEK sheets irradiated at a speed of 0.8 m/min with a total dose of 200 kGy achieved the lowest specific w...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
2 Citations
1,975 Views
15 Pages

18 December 2024

In this work, Ti6Al4V-Cu alloys with different Cu contents (2.4 and 7.9 wt.%) were fabricated using novel wire–powder synchronous arc additive manufacturing to analyze the effect of laser quenching on Ti6Al4V-Cu alloys. The results show that th...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
26 Citations
4,988 Views
20 Pages

PETG as an Alternative Material for the Production of Drone Spare Parts

  • Marija Z. Baltić,
  • Miloš R. Vasić,
  • Miloš D. Vorkapić,
  • Danica M. Bajić and ,
  • Ján Piteľ,
  • Petr Svoboda and
  • Aleksandar Vencl
  • + 2 authors+ 0 author

24 October 2024

Material selection is the main challenge in the drone industry. In this study, hardness, abrasive wear, impact resistance, tensile strength, and durability (frost resistance and accelerated ageing) were identified as important characteristics of dron...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
18 Citations
3,636 Views
18 Pages

Microstructural and Very High Cycle Fatigue (VHCF) Behavior of Ti6Al4V—A Comparative Study

  • T R Jebieshia,
  • Jong Min Kim,
  • Jung Woo Kang,
  • Seok Woo Son and
  • Heuy Dong Kim

21 April 2020

In this study, an investigation is carried out to evaluate and compare the material and physical properties of Grade 5 Titanium alloy (Ti6Al4V G5) samples of three different impeller manufacturers. The study aims to identify the efficient impeller co...

  • Article
  • Open Access
19 Citations
4,924 Views
15 Pages

4 December 2021

The results of microstructure and mechanical properties evaluation of a Stellite 6 (Co-6) alloy deposited on X22CrMoV12-1 substrate by the laser-engineered net shaping (LENSTM) technology are presented in this paper. The Stellite 6 alloy is widely us...

(This article belongs to the Special Issue High Performance Nonferrous Alloys: Composition, Microstructure and Properties)
  • Article
  • Open Access
20 Citations
2,888 Views
16 Pages

4 November 2022

This research work aims to fabricate the Al-4 wt.% SiC nanocomposite using the accumulative roll bonding (ARB) technique. Moreover, a finite element model based on real microstructure representative volume element representation and cohesive zone mod...

  • Review
  • Open Access
25 Citations
4,800 Views
15 Pages

Adiabatic Shear Banding in Nickel and Nickel-Based Superalloys: A Review

  • Russell A. Rowe,
  • Paul G. Allison,
  • Anthony N. Palazotto and
  • Keivan Davami

3 November 2022

This review paper discusses the formation and propagation of adiabatic shear bands in nickel-based superalloys. The formation of adiabatic shear bands (ASBs) is a unique dynamic phenomenon that typically precedes catastrophic, unpredicted failure in...

(This article belongs to the Special Issue Advances in Additive Manufacturing and Their Applications)
  • Article
  • Open Access
17 Citations
3,216 Views
17 Pages

13 October 2023

Directed energy deposition (DED) stands as a key process in metal additive manufacturing (AM) and offers the unique capability of creating functionally graded materials (FGMs). FGMs have garnered significant interest in high-value industries by advan...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
2 Citations
948 Views
19 Pages

Experimental Study and Optimization of Welding Parameters of Stainless Steel During Spot Welding

  • Amor Bourebbou,
  • Catalin Tampu,
  • Mourad Bendifallah,
  • Abderrahim Belloufi and ,
  • Mourad Abdelkrim,
  • Bogdan Chirita,
  • Eugen Herghelegiu,
  • Bogdan Nita and
  • Raluca Tampu
  • + 4 authors+ 0 author

26 March 2026

Welding is a fundamental technique for joining materials in industrial applications and large-scale construction. Various methods are employed to ensure robust connections. Resistance spot welding is ideal for thin sheets due to its speed, low cost,...

(This article belongs to the Special Issue Recent Advances in Surface Engineering and Coating Technologies in Manufacturing Processes)
  • Article
  • Open Access
1 Citations
952 Views
22 Pages

2 December 2025

This article presents the results of experimental investigations conducted to explain the causes of premature failure of two leaves of a semi-elliptical leaf spring mounted in a four-axle heavy-duty truck. The primary intended use of the vehicle was...

(This article belongs to the Special Issue Advances in Fatigue Analysis and Numerical Simulation in Engineering Materials)
  • Article
  • Open Access
3 Citations
1,061 Views
15 Pages

Spectroscopic Study of Electrolytic-Plasma Discharge During Hardening of 20GL Steel and Its Effect on Microstructure and Mechanical Properties

  • Bauyrzhan Rakhadilov,
  • Rinat Kurmangaliyev,
  • Nurlat Kadyrbolat,
  • Rinat Kussainov and ,
  • Zarina Satbayeva,
  • Almasbek Maulit and
  • Yerzhan Shayakhmetov
  • + 2 authors+ 0 author

13 November 2025

This study investigated the electrolytic-plasma hardening (EPH) of cast 20GL steel, used for railway spring beams. The main objective was to analyze the spectral characteristics of the cathodic discharge and establish correlations between the plasma...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
4 Citations
1,937 Views
12 Pages

ISE of Precious Metals: Au, Ag, Pd, and Pt

  • Lenka Girmanová,
  • Jozef Petrík,
  • Marek Šolc,
  • Peter Blaško and ,
  • Alena Pribulová and
  • Peter Futáš
  • + 1 author+ 0 author

19 September 2025

Precious metals play an important role in various fields, from industry to jewelry and finance. In the industrial field, it is often necessary to know their mechanical properties. Micro-hardness measurement is a suitable test. In this type of test, t...

  • Article
  • Open Access
26 Citations
7,010 Views
16 Pages

The Effect of Thermocycling and Surface Treatments on the Surface Roughness and Microhardness of Three Heat-Pressed Ceramics Systems

  • Roxana-Diana Vasiliu,
  • Sorin-Daniel Porojan,
  • Mihaela-Ionela Bîrdeanu,
  • Ion-Dragoș Uțu and
  • Liliana Porojan

1 March 2020

Dental ceramic restorations are widely used in restorative dentistry. However, these restorations can be affected once cemented in the oral cavity by several factors. How can conventional surface treatments, such as glazing and mechanical polishing,...

of 38