Skip to Content

1,000 Results Found

  • Article
  • Open Access
25 Citations
4,217 Views
10 Pages

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1Ni Ultra-High Strength Steel for Modeling of Flow Stress

  • Bingwang Lei,
  • Gaoqiang Chen,
  • Kehong Liu,
  • Xin Wang and ,
  • Xiaomei Jiang,
  • Jiluan Pan and
  • Qingyu Shi
  • + 2 authors+ 0 author

5 January 2019

High-temperature plastic flow is the underlying process that governs the product quality in many advanced metal manufacturing technologies, such as extrusion, rolling, and welding. Data and models on the high-temperature flow behavior are generally d...

  • Article
  • Open Access
6 Citations
2,132 Views
25 Pages

A New Constitutive Model Based on Taylor Series and Partial Derivatives for Predicting High-Temperature Flow Behavior of a Nickel-Based Superalloy

  • Heping Deng,
  • Xiaolong Wang,
  • Jingyun Yang,
  • Fanjiao Gongye and ,
  • Shishan Li,
  • Shixin Peng,
  • Jiansheng Zhang,
  • Guiqian Xiao and
  • Jie Zhou
  • + 4 authors+ 0 author

11 July 2024

Ni-based superalloys are widely used in aerospace applications. However, traditional constitutive equations often lack the necessary accuracy to predict their high-temperature behavior. A novel constitutive model, utilizing Taylor series expansions a...

  • Article
  • Open Access
1,892 Views
20 Pages

11 November 2023

The Brayton cycle system, as a closed cycle working under high-temperature, high-pressure and high-speed conditions, presents significant prospects in many fields. However, the flow behavior and energy efficiency of supercritical CO2 is severely infl...

(This article belongs to the Topic Research on the Mechanical Wear of Gear-Shaped Parts)
  • Article
  • Open Access
3 Citations
2,240 Views
21 Pages

Application of Four Different Models for Predicting the High-Temperature Flow Behavior of 1420 Al–Li Alloy

  • Yuyan Yang,
  • Xiaohui Dong,
  • Teng Zhao,
  • Zhou Zhou and ,
  • Yu Qiu,
  • Fei Wang and
  • Rui Luo
  • + 2 authors+ 0 author

26 November 2022

In this paper, the high-temperature rheological behavior of 1420 aluminum–lithium alloy under experimental conditions (temperatures of 350–475 °C and strain rates of 0.01–10 s−1) was systematically investigated using a Gleeble-3500 thermal simulation...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
14 Citations
5,297 Views
19 Pages

Initial β Grain Size Effect on High-Temperature Flow Behavior of Tb8 Titanium Alloys in Single β Phase Field

  • Qiuyue Yang,
  • Min Ma,
  • Yuanbiao Tan,
  • Song Xiang and ,
  • Fei Zhao and
  • Yilong Liang
  • + 1 author+ 0 author

15 August 2019

The high-temperature flow behavior of TB8 titanium alloys with two different grain sizes was investigated in this present work. Results show that a significant characteristic of stress drop is visible at the start stage of the hot deformation process...

(This article belongs to the Special Issue Titanium Alloys: Processing and Properties)
  • Article
  • Open Access
47 Citations
6,248 Views
13 Pages

30 June 2016

The hot deformation behavior of Al-0.12Fe-0.1Si alloys with varied amounts of Cu (0.002–0.31 wt %) was investigated by uniaxial compression tests conducted at different temperatures (400 °C–550 °C) and strain rates (0.01–10 s−1). The results demonstr...

  • Article
  • Open Access
8 Citations
5,819 Views
12 Pages

Nanoporous metals have attracted attention in various research fields in the past years since their unique microstructures make them favorable for catalytic, sensory or microelectronic applications. Moreover, the refinement of the ligaments down to t...

(This article belongs to the Special Issue Nanoporous Gold and Other Related Materials)
  • Article
  • Open Access
1 Citations
1,476 Views
15 Pages

12 March 2026

To address the corrosion protection issues for hot components of high-end equipment in extreme service environments, the C276 alloy coating was deposited on the surface of 304 stainless steel via high-velocity air fuel (HVAF) spraying. The extreme co...

(This article belongs to the Special Issue Feature Paper Collection of “Current Challenges in Corrosion Research” (3rd Edition))
  • Article
  • Open Access
25 Citations
3,511 Views
17 Pages

26 May 2022

To realize the purpose of energy saving, materials with high weight are replaced by low-weight materials with eligible mechanical properties in all kinds of fields. Therefore, conducting research works on lightweight materials under specified work co...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
6,117 Views
13 Pages

High-Temperature Tensile Properties and Serrated Flow Behavior of FeCrAl Alloy for Accident-Tolerant Fuel Cladding

  • Mengyu Chai,
  • Zelin Han,
  • Hao Su,
  • Hao Li and ,
  • Pan Liu and
  • Yan Song
  • + 1 author+ 0 author

16 December 2024

The development of FeCrAl alloys has commenced for use as nuclear fuel cladding material, intended to serve as an enhanced accident-tolerant alternative to Zr-based alloys. In this study, the Fe-13Cr-4Al alloy, specifically designed for advanced acci...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
395 Views
15 Pages

20 August 2026

This study presents a two-stage high shear-strain processing deformation technology, consisting of the intensive plastic deformation method of rotary swaging (RS), in combination with the severe plastic deformation method of continuous equal channel...

(This article belongs to the Special Issue Mechanical Properties and Numerical Modeling of Advanced Materials)
  • Article
  • Open Access
18 Citations
4,570 Views
14 Pages

Investigation and Modeling of the Preheating Effects on Precipitation and Hot Flow Behavior for Forming High Strength AA7075 at Elevated Temperatures

  • Kailun Zheng,
  • Yong Li,
  • Song Yang,
  • Kunning Fu and ,
  • Jinghua Zheng,
  • Zhubin He and
  • Shijian Yuan
  • + 2 authors+ 0 author

Preheating is the first but critical step for hot stamping high strength precipitate hardened aluminum alloys. To thoroughly understand the effects of preheating conditions—i.e., preheating rate and heating temperature—on the strength and...

(This article belongs to the Special Issue Hot, Warm and Cold Stamping of High Strength Steel and Aluminium Alloy Parts)
  • Article
  • Open Access
12 Citations
2,201 Views
23 Pages

11 November 2022

The deformation behavior and the constitutive description of materials are important in the design and numerical simulation of manufacturing processes. In this work, the rheological behavior of two quenchable boron steels was derived in the range of...

  • Article
  • Open Access
8 Citations
2,745 Views
19 Pages

10 January 2023

The paper investigates the rheological behavior and microstructuring of an AlMg6/10% SiC metal matrix composite (MMC). The rheological behavior and microstructuring of the AlMg6/10% SiC composite is studied for strain rates ranging between 0.1 and 4...

(This article belongs to the Special Issue Metal-Based Composite Materials: Preparation, Structure, Properties, and Applications)
  • Review
  • Open Access
18 Citations
4,686 Views
13 Pages

6 November 2024

AISI 321 stainless steel is widely used in chemical pipelines and nuclear power, prompting research on its high-temperature performance and corrosion resistance. This review focuses on the effects of alloy elements, second-phase particle formation, a...

  • Article
  • Open Access
4 Citations
4,104 Views
16 Pages

18 February 2022

The combination of linear friction welding (LFW) and hot forming processes is limited due to a lack of research on the high-temperature flow behavior and microstructure evolution of welded joints. In this paper, an electric-assisted high-temperature...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
1 Citations
658 Views
14 Pages

2 March 2026

Bulk metallic glasses exhibit unique viscoplastic flow behavior within their supercooled liquid region. Their high-temperature deformation mechanisms diverge markedly from the highly localized deformation at room temperature. This contrast offers a c...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
22 Citations
3,689 Views
16 Pages

Hot Deformation and Constitutive Modeling of TC21 Titanium Alloy

  • Sheng-Xian Yi,
  • Zhong-Jiong Yang and
  • Huang-Xin Xie

4 March 2022

Titanium alloys are extensively employed in the fabrication of various aviation structural parts, of which the most crucial processing step is hot working. In order to study the high-temperature deformation behavior of the TC21 titanium alloy, high-t...

  • Article
  • Open Access
8 Citations
6,414 Views
9 Pages

26 June 2019

Inconel 625 alloys are widely applied for high-corrosion resistance and as high-efficiency materials in aeronautical, aerospace, chemical, nuclear, petrochemical, and marine industries. Although Inconel 625 alloys are excellent materials, they cannot...

  • Article
  • Open Access
3 Citations
1,274 Views
19 Pages

High-Temperature Degradation of Throttling Performance in While-Drilling Jars Induced by Thermal Expansion and Fluid Rheology

  • Zhaoyang Zhao,
  • Zhanghua Lian,
  • Hao Yu,
  • Wei Sun and ,
  • Senyan Liu,
  • Zhiyong Wan and
  • Jiachang Nie
  • + 2 authors+ 0 author

7 September 2025

During deep and ultra-deep well drilling operations, the throttling performance of the hydraulic-while-drilling jar is significantly affected by the combined influence of temperature-induced differential thermal expansion among components and changes...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
3 Citations
1,780 Views
16 Pages

Ti6Al4V-0.72H on the Establishment of Flow Behavior and the Analysis of Hot Processing Maps

  • Jian-Hua Sun,
  • Hai Gu,
  • Jie Zhang,
  • Jie Jiang and ,
  • Guo-Qing Wu and
  • Zhong-Gang Sun
  • + 1 author+ 0 author

3 April 2024

Significant columnar grains usually occur in the metallurgical microstructure of laser additive manufacturing, and plastic deformation introduced into additive manufacturing can significantly refine grain size. Due to the high deformation resistance...

(This article belongs to the Special Issue Additive Manufacturing: Experiments, Simulations and Data-Driven Modelling)
  • Article
  • Open Access
7 Citations
3,524 Views
14 Pages

The Hot Tensile Properties, Fracture Features, and Microstructure Evolution of As-Cast 7005 Aluminum Alloy

  • Erli Xia,
  • Tuo Ye,
  • Limei Liu,
  • Wei Liu and ,
  • Huanyu Yue,
  • Jian Tang and
  • Yuanzhi Wu
  • + 2 authors+ 0 author

20 January 2024

In order to explore the hot deformation behaviors of the as-cast 7005 aluminum alloy, a number of hot tensile tests with four temperatures (100, 200, 300, and 400 °C) and three strain rates (0.001, 0.01, and 0.1 s−1) were performed. The Joh...

  • Article
  • Open Access
4 Citations
2,700 Views
12 Pages

Superplastic Forming of Zr-Based Bulk Metallic Glasses

  • Xiangyun Zhang,
  • Chenkai Zhao,
  • Caiyun Xiao,
  • Zizhou Yuan and
  • Jiankang Huang

22 December 2023

In this paper, the partially crystallized Zr70Cu13.5Ni8.5Al8 bulk metallic glasses (BMGs) were prepared, and their superplastic deformation ability in the supercooled liquid region was studied via compression over a wide range of strain rates from 5...

(This article belongs to the Topic Advances in Metallic Glasses)
  • Article
  • Open Access
5 Citations
2,769 Views
12 Pages

19 February 2022

The flow behavior of Ti-6Al-4V alloy during the air-cooling process after superplastic forming (SPF) has been discussed. In high-temperature constant strain rate tensile tests, the selected temperatures were 930, 900, 800, 700, and 600 °C, and th...

(This article belongs to the Topic Superplastic Forming)
  • Feature Paper
  • Article
  • Open Access
24 Citations
4,170 Views
16 Pages

Deformation Behavior and Constitutive Equation of 42CrMo Steel at High Temperature

  • Hongqiang Liu,
  • Zhicheng Cheng,
  • Wei Yu,
  • Gaotian Wang and ,
  • Jie Zhou and
  • Qingwu Cai
  • + 1 author+ 0 author

11 October 2021

High-temperature reduction pretreatment (HTRP) is a process that can significantly improve the core quality of a billet. The existing flow stress data cannot meet the needs of simulation due to lack of high temperature data. To obtain the hot forming...

(This article belongs to the Special Issue Advances in High-Strength Low-Alloy Steels)
  • Article
  • Open Access
23 Citations
6,198 Views
17 Pages

5 May 2023

High-temperature oxidation phenomena play a crucial role in steel production and processing. The development of new alloying concepts, the modification of production routes due to the decarbonization of steelmaking, and increasing quality demands wil...

(This article belongs to the Section Corrosion and Protection)
  • Article
  • Open Access
11 Citations
3,175 Views
19 Pages

Effect of Swirling Flow Nozzle on Fluid Flow and Solidification in a Round Bloom Continuous Casting Mold

  • Jianli Wang,
  • Jiayu Zhu,
  • Yongkun Yang,
  • Weian Wang and ,
  • Guoxing Qiu and
  • Xiaoming Li
  • + 1 author+ 0 author

28 November 2022

The nozzle structure has an important effect on the fluid flow in the mold, which can significantly improve the solidified shell and product quality of alloy steel round bloom. The transient fluid flow, heat transfer, and solidification behavior unde...

(This article belongs to the Special Issue Metallurgical Process Simulation and Optimization—2nd Volume)
  • Review
  • Open Access
33 Citations
5,729 Views
33 Pages

16 November 2022

Due to increased energy demand, it is vital to enhance the recovery from existing oilfields. Polymer flooding is the most frequently used chemical enhanced oil recovery (cEOR) method in field applications that increases the oil sweep and displacement...

(This article belongs to the Special Issue Enhanced Oil Recovery (EOR) Methods)
  • Article
  • Open Access
13 Citations
3,682 Views
17 Pages

Characterization of Hot Workability in AISI 4340 Based on a 3D Processing Map

  • Joonhee Park,
  • Yosep Kim,
  • Sangyun Shin and
  • Naksoo Kim

14 November 2022

This study performed high-temperature compression tests at the temperature 900 to 1200 °C and strain rate 0.01 to 10 s−1 to characterize the high-temperature deformation behavior of AISI 4340. The constitutive equation of AISI 4340 was expr...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
3,214 Views
16 Pages

7 January 2020

To investigate the effect of hydrogen on the high-temperature deformation behaviors of TiAl-based alloys, the high-temperature tensile experiment was carried out on a Ti–45Al–9Nb (at.%) alloy with the H content of 0 and 0.8 at.%, respecti...

(This article belongs to the Special Issue Metal Surfaces)
  • Article
  • Open Access
3 Citations
2,907 Views
15 Pages

21 March 2022

To investigate the thermal deformation behavior of Ti–10V–2Cr–3Al titanium alloy, the hot compression experiments were carried out via a strain rate of 0.1–0.001 s−1 and deformation temperature of 730~880 °C. The res...

  • Article
  • Open Access
3 Citations
1,674 Views
13 Pages

A Study on the Mechanical Properties of Ni-Al Alloy Based on Molecular Dynamics Simulation

  • Xuejin Yang,
  • Kemin Zhou,
  • Xu Han,
  • Shaoyun Song and ,
  • Fangyan Zheng,
  • Junsheng Yang and
  • Rui Li
  • + 2 authors+ 0 author

30 January 2026

With the wide application of Ni-Al high-temperature materials, the research on their performance has increasingly attracted attention. To further advance the development of Ni-Al high-temperature materials, it is necessary to conduct an in-depth anal...

(This article belongs to the Special Issue Exploring Wear and Friction Mechanisms in Tribological Coatings and Surface Textures)
  • Article
  • Open Access
4 Citations
1,476 Views
17 Pages

25 June 2024

To fully realize the potential application of spalled thermal barrier coating systems (TBCs) in gas turbine blades, it is essential to evaluate the service behavior of TBCs and the critical spallation size for safety servicing. For this purpose, the...

  • Article
  • Open Access
1 Citations
384 Views
14 Pages

Flow Stress Model of Hot Deformation for CoNiV Medium Entropy Alloy

  • Qixuan Hao,
  • Biao Zhang,
  • Yuntian Du,
  • Yaliang Liu and ,
  • Minghe Zhang and
  • Yunli Feng
  • + 1 author+ 0 author

6 July 2026

Hot compression experiments were performed to characterize the high-temperature deformation behavior of CoNiV medium-entropy alloy (MEA). Hot compression tests were carried out using a Gleeble-3500 thermomechanical simulator over strain rates of 0.00...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
9 Citations
3,153 Views
14 Pages

Research on Hot Deformation Behavior of F92 Steel Based on Stress Correction

  • Jinghui Li,
  • Renhai Yu,
  • Gaoshan Xu,
  • Changhua Chen and ,
  • Yao Ha,
  • Leijun Song and
  • Huiping Zhang
  • + 2 authors+ 0 author

19 April 2022

In order to systematically study the stress correction method and hot deformation behavior of F92 stainless steel, the hot compression test was performed using a Gleeble-3500 (DSI USA, Connecticut, CT, USA) at strain rates of 0.01–10 s−1...

(This article belongs to the Special Issue Advanced Technology in Microalloyed Steels)
  • Article
  • Open Access
623 Views
22 Pages

Rheological Properties and Prediction Method for Oil-Based Drilling Fluids Under High-Temperature and High-Pressure Conditions

  • Mingsheng Liu,
  • Yaopu Xu,
  • Qi Xia,
  • Haizhu Wang and ,
  • Qingfeng Guo,
  • Haizhi Zhang,
  • Chenxi Ye,
  • Guoxin Zhang,
  • Bin Wang and
  • Yong Zheng
  • + 5 authors+ 0 author

24 July 2026

The rheology of high-temperature and high-pressure oil-based drilling fluids is critical for managed pressure drilling in deep and ultra-deep wells. This study investigates the rheological behavior of high-temperature and high-pressure oil-based dril...

(This article belongs to the Section Petroleum and Low-Carbon Energy Process Engineering)
  • Article
  • Open Access
10 Citations
2,091 Views
17 Pages

An Investigation into the Thermomechanical Processing and Dynamic Recrystallization Mechanisms of High-Magnesium Aluminum Alloys

  • Zili Ye,
  • Zixiao Zhou,
  • Zhaolin Ye,
  • Zhi Wang and ,
  • Qizhong Zhao and
  • Konda Gokuldoss Prashanth
  • + 1 author+ 0 author

11 June 2025

In this study, we studied the dual role of magnesium on the high-temperature deformation mechanisms and microstructural evolution of high-Mg 5383 aluminum alloys. We developed a quantitative framework to characterize high-temperature flow behavior an...

(This article belongs to the Special Issue Quality, Microstructure and Properties of Metal Alloys (Second Volume))
  • Article
  • Open Access
14 Citations
4,333 Views
20 Pages

Hot Deformation Behavior of Q345 Steel and Its Application in Rapid Shear Connection

  • Mengwei Wu,
  • Shuangjie Zhang,
  • Shibo Ma,
  • Huajun Yan and ,
  • Wei Wang and
  • Qiang Li
  • + 1 author+ 0 author

7 July 2019

The high-temperature deformation behavior of Q345 steel is detected by a Gleeble-3800 thermal simulator. The Arrhenius constitutive equation for high-temperature flow stress and the dynamic recrystallization model are constructed. With the secondary...

(This article belongs to the Special Issue Development of the Rolling Process in Metallic Materials)
  • Article
  • Open Access
1 Citations
1,925 Views
23 Pages

Heat Transfer Enhancement in Flue-Gas Systems with Radiation-Intensifying Inserts: An Analytical Approach

  • Justina Menkeliūnienė,
  • Rolandas Jonynas,
  • Linas Paukštaitis,
  • Algimantas Balčius and
  • Kęstutis Buinevičius

27 June 2025

A significant portion of energy losses in industrial systems arises from the inefficient use of high-temperature exhaust gases, emphasizing the need for enhanced heat recovery strategies. This study aims to improve energy efficiency by examining the...

(This article belongs to the Special Issue New Advances in Two-Phase Heat and Mass Transfer for Efficient Energy Systems)
  • Article
  • Open Access
11 Citations
2,070 Views
24 Pages

Preparation and Physicochemical Properties of High-Temperature-Resistant Polymer Gel Resin Composite Plugging Material

  • Tao Wang,
  • Weian Huang,
  • Jinzhi Zhu,
  • Chengli Li and ,
  • Guochuan Qin and
  • Haiying Lu
  • + 1 author+ 0 author

22 April 2025

Lost circulation has become one of the important problems restricting the speed and efficiency of oil and gas drilling and production. To address severe drilling fluid losses in high-temperature fractured formations during deep/ultra-deep well drilli...

(This article belongs to the Special Issue Gels for Oil and Gas Industry Applications (3rd Edition))
  • Article
  • Open Access
1 Citations
845 Views
12 Pages

High-Temperature Deformation Behavior of Powder Metallurgy Ti-4Zr-6Al-0.6Si-0.5Mo Alloy

  • Zongshu Li,
  • Wentao Liu,
  • Jian Wang,
  • Yuankui Cao and ,
  • Qihong Fang,
  • Ao Fu and
  • Bin Liu
  • + 2 authors+ 0 author

29 December 2025

The hot deformation behavior of Ti-4Zr-6Al-0.6Si-0.5Mo high-temperature titanium alloy was investigated under temperatures of 800–1100 °C, strain rates of 0.001–1 s−1, and a true strain of 0.5. Flow stress curves under different...

(This article belongs to the Special Issue Fracture and Fatigue in Metals and Alloys)
  • Article
  • Open Access
5 Citations
3,585 Views
17 Pages

High Temperature Deformation Behavior of Near-β Titanium Alloy Ti-3Al-6Cr-5V-5Mo at α + β and β Phase Fields

  • Haoyu Zhang,
  • Shuo Zhang,
  • Shuai Zhang,
  • Xuejia Liu and ,
  • Xiaoxi Wu,
  • Siqian Zhang and
  • Ge Zhou
  • + 2 authors+ 0 author

21 February 2023

Most near-β titanium alloy structural components should be plastically deformed at high temperatures. Inappropriate high-temperature deformed processes can lead to macro-defects and abnormally coarse grains. Ti-3Al-6Cr-5V-5Mo alloy is a near-&be...

(This article belongs to the Special Issue Crystallization of High Performance Metallic Materials)
  • Article
  • Open Access
8 Citations
5,437 Views
15 Pages

Numerical Analysis and Optimization of Flow Rate for Vanadium Flow Battery Incorporating Temperature Effect

  • Lukang Han,
  • Hui Chen,
  • Xiangdong Cheng,
  • Qiang He and ,
  • Fuyu Chen and
  • Qinfang Zhang
  • + 1 author+ 0 author

The vanadium flow batteries that employ the vanadium element as active couples for both half-cells, thus avoiding cross-contamination, are promising large-scale energy storage devices. In this work, the flow rate is optimized by incorporating the tem...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
9 Citations
2,449 Views
21 Pages

Effect of CO2 Concentration on the Performance of Polymer-Enhanced Foam at the Steam Front

  • Mingxuan Wu,
  • Binfei Li,
  • Liwei Ruan,
  • Chao Zhang and ,
  • Yongqiang Tang and
  • Zhaomin Li
  • + 1 author+ 0 author

26 September 2024

This study examines the impact of CO2 concentration on the stability and plugging performance of polymer-enhanced foam (PEF) under high-temperature and high-pressure conditions representative of the steam front in heavy oil reservoirs. Bulk foam expe...

(This article belongs to the Special Issue New Advances in Polymer-Based Surfactants)
  • Article
  • Open Access
2,301 Views
15 Pages

Research on Constitutive Model and Algorithm of High-Temperature-Load Coupling Damage Based on the Zienkiewicz–Pande Yield Criterion

  • Tao Zhan,
  • Tengfei Jiang,
  • Shengbiao Shan,
  • Fu Zheng and ,
  • Annan Jiang and
  • Xinping Guo
  • + 1 author+ 0 author

29 August 2023

The mechanical properties of rock can be weakened under the influence of high temperatures. To describe the mechanical behavior of rock under the action of high temperature more accurately, based on the Zienkiewicz–Pande yield criterion, the da...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
546 Views
19 Pages

Corrosion Behavior of Bubble Tubes in Glass Curing Furnaces Under the Heat–Flow Coupling Effect

  • Heyi Guo,
  • Ce Zheng,
  • Yingjv Li,
  • Qiuyan Huang and ,
  • Qingbin Zhao,
  • Minhang Sun and
  • Yuansheng Yang
  • + 2 authors+ 0 author

5 June 2026

The bubble tube of a glass curing furnace was subjected to extreme heat–flow coupling conditions for a long time due to the scouring of melt flow caused by the gas flow bubbling in a high-temperature molten glass environment at 1150 °C, res...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
1 Citations
910 Views
23 Pages

Performance of a High-Molecular-Weight AM/AA Copolymer in a CO2–Water Polymer Hybrid Fracturing Fluid Under High-Temperature and High-Pressure Conditions

  • Tengfei Chen,
  • Shutao Zhou,
  • Tingwei Yao,
  • Meilong Fu and ,
  • Zhigang Wen and
  • Quanhuai Shen
  • + 1 author+ 0 author

5 February 2026

To reduce water consumption and potential formation damage associated with conventional water-based fracturing fluids while improving the proppant-carrying and flow adaptability of CO2-based systems without relying on specialized CO2 thickeners, a CO...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
3 Citations
3,005 Views
12 Pages

24 December 2021

This study presents the adoption of locally constrained regression models (LCRMs) with logarithmic transformations in order to model the flow stress behavior of the high-temperature deformation of 5005 aluminum alloy. Hot tensile tests for 5005 alumi...

  • Article
  • Open Access
511 Views
16 Pages

22 May 2026

This study investigates the flow stress behavior of Z-shaped steel wire used in cable sealing applications, over a temperature range of 20–500 °C and a strain rate range of 10−4 to 3000 s−1. The primary objective is to establish...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
889 Views
22 Pages

4 January 2026

Rare-earth aluminum alloy materials exhibit excellent strength, plasticity, and toughness at room temperature, making them easily meet the lightweight requirements of structural components, and high-temperature plastic forming is widely applied. Acco...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)

of 20