Skip to Content

482 Results Found

  • Article
  • Open Access
2 Citations
3,582 Views
19 Pages

13 April 2023

From the point of view of material multiscale analysis, the deterioration of the fatigue properties of the cable is due to the micro-damage inside the strand. To describe the damage failure process of the cable as accurately as possible, many micro d...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
5 Citations
3,347 Views
16 Pages

5 July 2023

Natural gas transmission pipelines installed in seismic and permafrost regions are vulnerable to cyclic loads with a large strain amplitude. Under these conditions, the pipe may fail in extremely low cycles, a situation which is also known as extreme...

(This article belongs to the Topic Fatigue and Fracture Assessment of Structural Components and Materials)
  • Article
  • Open Access
7 Citations
2,430 Views
14 Pages

Fatigue Damage Behaviors of TRC-Strengthened RC Beams

  • Jie Sheng,
  • Zongjian Yu,
  • Guotao Dou and
  • Hao Liu

22 July 2022

For the investigation of fatigue damage behavior of textile reinforced concrete (TRC)-strengthened RC beams, in this study, eight RC beams were fabricated, and five of them were strengthened with TRC and tested under fatigue loading until failure, us...

  • Article
  • Open Access
27 Citations
6,533 Views
22 Pages

Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading

  • Ilja Koch,
  • Gordon Just,
  • Martin Brod,
  • Jiuheng Chen and ,
  • Audrius Doblies,
  • Aamir Dean,
  • Maik Gude,
  • Raimund Rolfes,
  • Christian Hopmann and
  • Bodo Fiedler
  • + 5 authors+ 0 author

28 May 2019

Understanding the composite damage formation process and its impact on mechanical properties is a key step towards further improvement of material and higher use. For its accelerated application, furthermore, practice-related modeling strategies are...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymers)
  • Article
  • Open Access
455 Views
15 Pages

21 March 2026

This paper presents the first study on the fatigue damage behavior of seawater sea-sand concrete (SSC) and its modeling. Experimental tests were conducted on cylindrical specimens subjected to uniaxial compression, investigating the effects of maximu...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
9 Citations
2,967 Views
14 Pages

Low Cycle Fatigue Crack Damage Behavior of TC21 Titanium Alloy with Basketweave Microstructure

  • Baohua Nie,
  • Shuai Liu,
  • Xianyi Huang,
  • Haiying Qi and ,
  • Binqing Shi,
  • Zihua Zhao and
  • Dongchu Chen
  • + 2 authors+ 0 author

28 August 2022

Low cycle fatigue (LCF) crack initiation, propagation and damage behaviors of TC21 alloy with basketweave microstructure were investigated. The process of LCF damage was observed by a long-focus optical microscopic imaging system, and fatigue crack p...

(This article belongs to the Special Issue Advances in High Strength Steels)
  • Article
  • Open Access
1,237 Views
31 Pages

20 December 2025

Variable amplitude fatigue loading can result in both accelerated and decelerated fatigue damage due to load interaction effects. Short fatigue cracks in particular exhibit a wide range of crack growth behavior due to multiple damage mechanisms contr...

  • Article
  • Open Access
928 Views
27 Pages

Low-Cycle Fatigue Behavior and Microstructural Damage Mechanisms of 316L Austenitic Stainless Steel in Cryogenic Environments

  • Sujuan Guo,
  • Guolong Zhang,
  • Junnan Chen,
  • Lei Li and ,
  • Hui Zhang,
  • Qicong Li and
  • Jian Zhao
  • + 2 authors+ 0 author

10 June 2026

This study focuses on the low-cycle fatigue behavior and microstructural damage mechanisms of 316L austenitic stainless steel in cryogenic environments to enhance understanding of its fatigue performance and failure mechanisms over a wide temperature...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
1,401 Views
20 Pages

Effect of Foreign Object Damage on Corrosion Fatigue Behavior in Surface-Strengthened EA4T Railway Axle Steel

  • Yan Luo,
  • Gang Li,
  • Cunhai Li,
  • Chuanqi Qi and ,
  • Yongxu Hu and
  • Ping Yuan
  • + 1 author+ 0 author

The electrochemical behavior and corrosion fatigue property of the surface-strengthened EA4T axle steel subjected to foreign object damage (FOD) is investigated in this study. It is found that the corrosion resistance can be enhanced after being impa...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)
  • Article
  • Open Access
1 Citations
2,964 Views
21 Pages

Finite Element Analysis-Based Assessment of Damage Parameters for Ultra-Low-Cycle Fatigue Behavior of Structural Steels

  • Ivan Milojević,
  • Mirsad Tarić,
  • Dardan Klimenta,
  • Bojana Grujić and ,
  • Darius Andriukaitis,
  • Saša Jovanović and
  • Miloš Čolović
  • + 2 authors+ 0 author

18 April 2025

Steel structures subjected to earthquakes or extreme cyclic loadings may undergo extensive damage and fractures due to ultra-low-cycle fatigue (ULCF). Although assessments of damage initiation and evolution parameters have been carried out for some s...

(This article belongs to the Special Issue Symmetry, Asymmetry and Other Patterns in Structural Engineering with Its Application)
  • Article
  • Open Access
215 Views
27 Pages

Influence of Tower Inclination on the Dynamic Behavior and Fatigue Damage of Twin-Rotor Floating Offshore Wind Turbines

  • Shuai Li,
  • Chuangchuang He,
  • Qianni Liu,
  • Xintong Luan and ,
  • Jungang Hao,
  • Musa Bashir and
  • Yang Yang
  • + 2 authors+ 0 author

1 November 2026

Twin-rotor floating offshore wind turbines (TwinFOWTs) exhibit significant potential for reducing the cost of floating wind technology, emerging as an advantageous alternative to conventional large-scale wind turbines. This study proposes a 10 MW flo...

(This article belongs to the Section Ocean Engineering)
  • Feature Paper
  • Article
  • Open Access
2 Citations
1,540 Views
26 Pages

Effect of Corrosion-Induced Damage on Fatigue Behavior Degradation of ZCuAl8Mn13Fe3Ni2 Nickel–Aluminum Bronze Under Accelerated Conditions

  • Ruonan Zhang,
  • Junqi Wang,
  • Pengyu Wei,
  • Lian Wang and ,
  • Chihui Huang,
  • Zeyu Dai,
  • Jinguang Zhang,
  • Chaohe Chen and
  • Xinyan Guo
  • + 4 authors+ 0 author

29 July 2025

Corrosion fatigue damage significantly affects the long-term service of marine platforms such as propellers. Fatigue testing of pre-corrosion specimens is essential for understanding damage mechanisms and accurately predicting fatigue life. However,...

(This article belongs to the Special Issue Design, Mechanical Properties, and Fatigue Behavior of Materials, Welding Joints and Structures)
  • Article
  • Open Access
184 Views
28 Pages

Corrosion-Induced Degradation of Low-Cycle Fatigue Behavior in Q690qNH Weathering Steel: Coupling of Hierarchical Rust Layer Evolution and Surface Damage

  • Yaohan Du,
  • Mingzhe Liu,
  • Huangjing Tao,
  • Xuefeng Xiao and ,
  • Qiuchi Xiao,
  • Kun Yang,
  • Xue Li,
  • Hong Zhang,
  • Ying Yang and
  • Qingyuan Wang
  • + 5 authors+ 0 author

27 October 2026

Marine atmospheric corrosion can compromise the fatigue reliability of high-strength weathering steel structures, yet the coupled effects of protective rust-layer evolution and corrosion-pit damage on low-cycle fatigue behavior remain insufficiently...

(This article belongs to the Special Issue Corrosion Behavior and Mechanical Properties of Metallic Materials (3rd Edition))
  • Article
  • Open Access
14 Citations
4,555 Views
18 Pages

10 July 2020

Hybrid laminates consist of layers of different materials, which determine the mechanical properties of the laminate itself. Furthermore, the structure and interfacial properties between the layers play a key role regarding the performance under load...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
22 Citations
6,436 Views
15 Pages

3 February 2016

Non-oxide fiber-reinforced ceramic-matrix composites are promising candidates for some aeronautic applications that require good thermomechanical behavior over long periods of time. This study focuses on the behavior of a SiCf/[Si-B-C] composite with...

(This article belongs to the Special Issue Acoustic and Elastic Waves: Recent Trends in Science and Engineering)
  • Article
  • Open Access
12 Citations
4,027 Views
12 Pages

4 March 2022

Previous research has found that lower temperature drilling is helpful to improve the hole quality of carbon fiber reinforced polymer (CFRP). However, the influence of the lower temperature drilling process on the mechanical behavior of composites is...

(This article belongs to the Topic Fatigue and Fracture Assessment of Structural Components and Materials)
  • Review
  • Open Access
12 Citations
8,526 Views
17 Pages

Stress-Corrosion Interactions in Zr-Based Bulk Metallic Glasses

  • Petre Flaviu Gostin,
  • Dimitri Eigel,
  • Daniel Grell,
  • Margitta Uhlemann and ,
  • Eberhard Kerscher,
  • Jürgen Eckert and
  • Annett Gebert
  • + 2 authors+ 0 author

15 July 2015

Stress-corrosion interactions in materials may lead to early unpredictable catastrophic failure of structural parts, which can have dramatic effects. In Zr-based bulk metallic glasses, such interactions are particularly important as these have very h...

(This article belongs to the Special Issue Metallic Glasses)
  • Article
  • Open Access
17 Citations
3,961 Views
19 Pages

7 September 2021

Many in-service bridges with steel–concrete composite beams are currently aging and experiencing performance deterioration. Under long-term cyclic loads from traffic on bridges, headed shear studs in steel–concrete composite beams are vulnerable to f...

  • Editorial
  • Open Access
406 Views
7 Pages

23 June 2026

Fatigue remains one of the principal causes of degradation and failure in engineering components subjected to cyclic, variable-amplitude, thermomechanical, corrosive, or otherwise complex loading conditions [...]

(This article belongs to the Special Issue Fatigue Damage Behavior and Mechanisms: Latest Advances and Prospects)
  • Article
  • Open Access
521 Views
20 Pages

5 February 2026

Fatigue failure is a prevalent concern within structural engineering, often resulting in critical safety risks. The inherent complexity of construction projects leads to structural components experiencing loads of varying amplitudes and diverse load...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
17 Citations
5,165 Views
9 Pages

Experimental Investigation of the Acoustic Nonlinear Behavior in Granular Polymer Bonded Explosives with Progressive Fatigue Damage

  • Zhanfeng Yang,
  • Yong Tian,
  • Weibin Li,
  • Haiqiang Zhou and ,
  • Weibin Zhang and
  • Jingming Li
  • + 1 author+ 0 author

16 June 2017

The measurement of acoustic nonlinear response is known as a promising technique to characterize material micro-damages. In this paper, nonlinear ultrasonic approach is used to characterize the evolution of fatigue induced micro-cracks in polymer bon...

  • Article
  • Open Access
12 Citations
4,369 Views
25 Pages

19 May 2021

As it is widely known, corrosion constitutes a major deterioration factor for reinforced concrete structures which are located in coastal areas. This phenomenon, combined with repeated loads and, especially, intense seismic events, negatively affect...

(This article belongs to the Special Issue Corrosion Effects on Durability of RC Structures)
  • Article
  • Open Access
21 Citations
3,813 Views
17 Pages

25 July 2019

The possibility of producing profiles directly by hot extrusion of aluminum chips, normally considered as scrap, is a promising alternative to the energy-intensive remelting process. It has to be taken into account that the mechanical properties depe...

(This article belongs to the Special Issue Advanced Approaches Applied to Materials Development and Design Predictions)
  • Article
  • Open Access
7 Citations
3,531 Views
14 Pages

Low Cycle Fatigue Characteristics of Oxygen-Free Copper for Electric Power Equipment

  • Takuma Tanaka,
  • Togo Sugioka,
  • Tatsuya Kobayashi,
  • Ikuo Shohji and ,
  • Yuya Shimada,
  • Hiromitsu Watanabe and
  • Yuichiro Kamakoshi
  • + 2 authors+ 0 author

29 July 2021

The effect of heat treatment on tensile and low cycle fatigue properties of the oxygen-free copper for electric power equipment was investigated. The heat treatment at 850 °C for 20 min, which corresponds to the vacuum brazing process, caused the gra...

(This article belongs to the Special Issue Research on Fatigue Behavior of Metals and Alloys)
  • Article
  • Open Access
187 Views
19 Pages

Strain-Dependent High-Temperature Low-Cycle Fatigue Behavior and Damage Mechanisms of GH4169 Alloy After Cold-Drawing Pre-Deformation and Short-Time Annealing

  • Haiquan Liu,
  • Xinyu Gu,
  • Senhao Yang,
  • Ting Xiong and ,
  • Yanzhong Tian,
  • Meng Wang and
  • Feng Liu
  • + 2 authors+ 0 author

31 October 2026

The high-temperature low-cycle fatigue (LCF) response of GH4169 (Inconel 718) is sensitive to the initial microstructural state, yet the coupled effects of cold-drawing pre-deformation and subsequent annealing remain insufficiently understood. A dire...

(This article belongs to the Special Issue Advanced Metallic Materials for Structural and Functional Applications: Processing, Microstructure and Performance)
  • Article
  • Open Access
5 Citations
2,886 Views
13 Pages

This paper presents a straightforward approach for determining the low-cycle fatigue (LCF) crack propagation rate in stiffened plate structures containing cracks. The method relies on both the crack tip opening displacement (CTOD) and the accumulativ...

(This article belongs to the Special Issue Safety and Reliability of Ship and Ocean Engineering Structures)
  • Article
  • Open Access
13 Citations
4,249 Views
19 Pages

The Low-Cycle Fatigue Behavior, Microstructure Evolution, and Life Prediction of SS304: Influence of Temperature

  • Ting Mei,
  • Quanyi Wang,
  • Meng Liu,
  • Yunqing Jiang and ,
  • Tongfei Zou and
  • Yifan Cai
  • + 1 author+ 0 author

21 September 2023

To study the fatigue failure and microstructure evolution behavior of SS304, low-cycle fatigue tests are conducted at room temperature (RT), 300 °C, and 650 °C. The results indicate that, because of the influence of the dislocation walls, car...

(This article belongs to the Special Issue Mechanics Behavior, Fatigue Damage, and Microstructure Evolution of Metallic Material)
  • Article
  • Open Access
8 Citations
1,810 Views
12 Pages

Effect of Potassium-Ion-Triggered Double Helix Aggregation on Shakedown Behavior of κ-Carrageenan/Polyacrylamide Hydrogel

  • Xueqi Zhao,
  • Yudong Pan,
  • Zhanrong Zhou,
  • Yang Gao and ,
  • Aijun Li,
  • Binkai Shi,
  • Jian Hu and
  • Liuying Wang
  • + 3 authors+ 0 author

30 May 2025

This study investigates the effect of potassium ion (K+) concentration on double helix aggregation in κ-carrageenan-based hydrogels, which significantly influences their shakedown behavior. The shakedown behavior of κ-carrageenan/polyacry...

(This article belongs to the Special Issue Functional Gel Materials: Chemistry, Processing, Mechanical Performance, and Applications)
  • Article
  • Open Access
574 Views
17 Pages

Modeling the Flexural Behavior of Synthetic and Bio-Based Sandwich Composite Materials Under Cyclic Fatigue

  • Driss Hana,
  • El Mahi Abderrahim,
  • Bentahar Mourad,
  • Beyaoui Moez and
  • Haddar Mohamed

4 June 2026

This study investigates the fatigue behaviour of sandwich composite materials under three-point bending. A stiffness reduction approach was adopted to model the damage evolution as a function of fatigue cycles. However, existing studies often rely on...

(This article belongs to the Section Materials Engineering)
  • Article
  • Open Access
8 Citations
5,556 Views
25 Pages

A Damage Model for Concrete under Fatigue Loading

  • Zhi Shan,
  • Zhiwu Yu,
  • Xiao Li,
  • Xiaoyong Lv and
  • Zhenyu Liao

9 July 2019

For concrete, fatigue is an essential mechanical behavior. Concrete structures subjected to fatigue loads usually experience a progressive degradation/damage process and even an abrupt failure. However, in the literature, certain essential damage beh...

(This article belongs to the Special Issue Fatigue and Fracture of Non-metallic Materials and Structures)
  • Article
  • Open Access
5 Citations
3,834 Views
14 Pages

Mechanical Properties of Low Carbon Alloy Steel with Consideration of Prior Fatigue and Plastic Damages

  • Qing Liu,
  • Zhanzhan Tang,
  • Xuan Yang,
  • Zhixiang He and ,
  • Hanyang Xue and
  • Hanqing Zhuge
  • + 1 author+ 0 author

11 July 2022

Mechanical properties, including the fatigue behavior of metals, are usually determined from damage-free specimens, but it is not well known how these properties change with respect to prior damages; hence, the present work aims to understand the rem...

(This article belongs to the Special Issue Crystal Plasticity (Volume II))
  • Article
  • Open Access
4 Citations
3,467 Views
21 Pages

20 March 2023

A phenomenological 3D anisotropic nonlinear fatigue damage model has been developed for a short glass fiber-reinforced polyamide. The model is formulated within the framework of continuum damage mechanics and is based on a proposed anisotropic hypere...

(This article belongs to the Special Issue Advanced Mathematical Modeling and Numerical Solutions in Applied Mechanics and Engineering)
  • Article
  • Open Access
12 Citations
4,759 Views
13 Pages

1 June 2021

The multiaxial character of high-speed railway brake disc thermomechanical fatigue damage is studied in this work. Although the amplitudes and distributions of temperature, strain and stress are similar with uniform and rotating loading methods, the...

(This article belongs to the Special Issue Vehicle Design Processes)
  • Article
  • Open Access
9 Citations
3,795 Views
15 Pages

Multiscale Damage Evolution Analysis of Aluminum Alloy Based on Defect Visualization

  • Yuquan Bao,
  • Yali Yang,
  • Hao Chen,
  • Yongfang Li and ,
  • Jie Shen and
  • Shuwei Yang
  • + 1 author+ 0 author

3 December 2019

The evaluation of fatigue life through the mechanism of fatigue damage accumulation is still a challenging task in engineering structure failure analysis. A multiscale fatigue damage evolution model was proposed for describing both the mesoscopic voi...

(This article belongs to the Special Issue Fracture and Fatigue Assessments of Structural Components)
  • Article
  • Open Access
25 Citations
5,171 Views
11 Pages

Research on the Effect of Pearlite Lamellar Spacing on Rolling Contact Wear Behavior of U75V Rail Steel

  • Junjie Fei,
  • Guifeng Zhou,
  • Jianhua Zhou,
  • Xudong Zhou and ,
  • Zhao Li,
  • Duo Zuo and
  • Run Wu
  • + 2 authors+ 0 author

26 January 2023

The damage mode of U75V rail steel in application is determined by its rolling wear behavior. In this paper, the pearlite microstructure of U75V steel is characterized to investigate the relationship between wear and fatigue behavior. The results sho...

  • Article
  • Open Access
26 Citations
4,033 Views
17 Pages

13 December 2021

An economically efficient yet safe design of concrete structures under high-cycle fatigue loading is a rather complex task. One of the main reasons is the insufficient understanding of the fatigue damage phenomenology of concrete. A promising hypothe...

(This article belongs to the Special Issue Cyclic Deterioration of Concrete)
  • Article
  • Open Access
17 Citations
8,344 Views
21 Pages

15 August 2017

The fatigue behavior of a cellular composite with an epoxy matrix and glass foam granules is analyzed and modeled by means of continuum damage mechanics. The investigated cellular composite is a particular type of composite foam, and is very similar...

(This article belongs to the Special Issue Syntactic Foams: Microstructural Characterisation and Effective Properties)
  • Article
  • Open Access
15 Citations
6,386 Views
14 Pages

17 October 2020

This study experimentally investigated the flexural fatigue behaviors of honeycomb sandwich composites subjected to low velocity impact damage by considering the type and thickness of the face sheet material, the cell size and the core height paramet...

  • Article
  • Open Access
6 Citations
4,987 Views
23 Pages

30 December 2019

In this study, parameters that should be monitored during the service life of a bridge and the relationship between the parameters and damage are investigated in order to predict the fatigue damages in steel-concrete composite bridge girders with wel...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
3 Citations
2,241 Views
14 Pages

21 December 2022

The fatigue damage assessment of laser-repaired components is critical to their service safety. However, since laser repairing is an advanced green remanufacturing technology, the current research on its fatigue mechanical behavior and fatigue damage...

(This article belongs to the Section Mechanics of Materials)
  • Review
  • Open Access
17 Citations
5,158 Views
15 Pages

1 January 2023

Research on the creep-thermomechanical fatigue (CTMF) behaviors of austenitic stainless steel for nuclear power plant pipelines is reviewed in the present paper. The stress response behavior, the main damage mechanisms, including thermomechanical fat...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
6 Citations
3,249 Views
14 Pages

26 March 2023

In this research, the fatigue damage behavior under three-point bending of a composite joint incorporating a single countersunk fastener is investigated. Firstly, a self-developed fatigue test system was set up to test the fatigue characteristics of...

(This article belongs to the Special Issue Advances in Fiber Reinforced Polymer Composites)
  • Article
  • Open Access
1,731 Views
22 Pages

12 June 2025

To investigate the mechanical behavior and damage mechanism of notch–stud connectors in timber–concrete composites under fatigue loading, fifteen push-out specimens in five groups were designed with load cycles as the key variable. Fatigu...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
383 Views
20 Pages

13 September 2026

The fatigue of an SBS asphalt mixture with physical gel structures under repeated loading is a variable-rate mechanical process. However, there is a lack of a mechanical characterization mechanism to accurately quantify this process. This study aims...

(This article belongs to the Special Issue Novel Polymer Gels: Synthesis, Properties, and Applications (2nd Edition))
  • Article
  • Open Access
11 Citations
3,565 Views
33 Pages

Equivalent Fatigue Constitutive Model Based on Fatigue Damage Evolution of Concrete

  • Huating Chen,
  • Zhenyu Sun,
  • Xianwei Zhang and
  • Wenxue Zhang

27 September 2024

Concrete structures such as bridge decks and road pavements are subjected to repetitive loading and are susceptible to fatigue failure. A simplified stress–strain analysis method that can simulate concrete behavior with a sound physical basis,...

(This article belongs to the Special Issue Fatigue Damage Behavior and Mechanisms: Latest Advances and Prospects)
  • Article
  • Open Access
13 Citations
5,075 Views
10 Pages

22 August 2019

Fatigue damage accumulation theory is one of the core contents in structure fatigue strength design and life prediction. Among them, the nonlinear damage model can overcome the shortcomings of the linear damage model, which takes the loading sequence...

  • Article
  • Open Access
5 Citations
2,696 Views
13 Pages

CFRP Fatigue Damage Detection by Thermal Methods

  • Marta De Giorgi,
  • Riccardo Nobile and
  • Fania Palano

26 May 2022

In this work, the fatigue damage of CFRP uniaxial composite specimens were studied using thermal methods to determine the fatigue behavior. The aim was to evaluate the fatigue damage as a function of the number of cycles. Consequently, the damage pro...

(This article belongs to the Special Issue Fatigue and Fracture Behavior of Composite Materials)
  • Article
  • Open Access
3 Citations
2,105 Views
13 Pages

19 December 2024

Accurately predicting fatigue failure in CFRP laminates requires an understanding of the cyclic behavior of their resin matrix, which plays a crucial role in the materials’ overall performance. This study focuses on the temperature elevation du...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
23 Citations
4,332 Views
19 Pages

Experimental and Numerical Study of Combined High and Low Cycle Fatigue Performance of Low Alloy Steel and Engineering Application

  • Zhanzhan Tang,
  • Zheng Chen,
  • Zhixiang He,
  • Xiaomei Hu and ,
  • Hanyang Xue and
  • Hanqing Zhuge
  • + 1 author+ 0 author

18 June 2021

The fatigue behaviors of metals are different under different in-service environment and loading conditions. This study was devoted to investigating the combined effects of high and low cycle fatigue loads on the performance of the low alloy steel Q3...

(This article belongs to the Special Issue Commemorating the Launch of the Section 'Metals and Alloys')
  • Article
  • Open Access
12 Citations
5,820 Views
9 Pages

22 November 2016

The [ 2 ¯ 33 ] coplanar double-slip-oriented Cu single crystals were pre-fatigued up to a saturation stage and then uniaxially tensioned or compressed to fracture. The results show that for the specimen pre-fatigued at a plastic strain ampl...

(This article belongs to the Special Issue Fatigue Damage)

of 10