The plasticity and hardness of metals are largely dependent on how dislocation interacts with solute atoms. Here, taking bcc molybdenum (Mo) as the example, the interaction of interstitial solutes carbon (C) and oxygen (O) with screw dislocation, and...
This work deals with the study of changes in the dislocation structure and quantitative characteristics, as well as morphological components, of 0.34Cr-1Ni-Mo-Fe steel before and after plasma electrolytic hardening. According to the electron microsco...
The reaction–diffusion equation approach, which solves differential equations of the development of density distributions of mobile and immobile dislocations under mutual interactions, is a method widely used to model the dislocation structure...
This study investigates the strain hardening and dislocation structure in the surface layers of C45 steel subjected to precision grinding at various depths. The aim was to assess how different grinding conditions influence the mechanical response and...
Basal dislocations having a Burgers vector of 1/3<2
A molecular dynamics approach was employed to investigate the interaction behavior between tilt-[110] copper grain boundaries (GBs) and dislocations, with particular emphasis on elucidating the role of GB structural unit (SU) types in the mechanisms...
Theoretical model is suggested, which describes of a new micromechanism of crossover from deformation twinning to lattice dislocation slip in metal–graphene nanocomposite with a bimodal structure. In the framework of the model, the lattice dislocatio...
Owing to the differences in crystallographic orientations among individual grains, dislocation structures in polycrystals are inherently inhomogeneous from grain to grain. Since intergranular incompatibility is inevitable during plastic deformation,...
The dislocation density in additive-manufactured components significantly influences the local mechanical behavior of crystalline metals. Nanoindentation, renowned for its sensitivity to local mechanical responses and hardness, facilitates the assess...
The hot deformation behavior of an advanced nickel-based Haynes282 superalloy was systematically investigated employing isothermal compression tests in the sub-solvus and super-solvus temperature with various strain rates. The influence of deformatio...
Precipitation strengthening represents a crucial strengthening approach in the realm of metals, with particular significance for magnesium. In this study, a complex LPSO–precipitate structure, which is constituted of the principal secondary pha...
Using large-scale atomistic simulations, dislocation mechanics in the presence of linear complexions are investigated in an Fe-Ni alloy, where the complexions appear as nanoparticle arrays along edge dislocation lines. When mechanical shear stress is...
Ni/Ni3Al heterogeneous multilayer structures are widely used in aerospace manufacturing because of their unique coherent interfaces and excellent mechanical properties. Revealing the deformation mechanisms of interfacial structures is of great signif...
A new method of thermo-mechanical processing has been designed by introducing pre-aging before general cold rolling for an Al-Zn-Mg alloy. This process results in an increase of 200 MPa in yield strength compared to that of the peak-aged samples. The...
Polycrystalline copper samples were deformed in the range of strain rate between ~10−3 and 107 s−1 using a material testing machine, split Hopkinson pressure bar and electric gun. The quasi-static and Hopkinson bar samples were compressed at the stra...
In this work, the structure and stability of partial dislocation (PD) complexes terminating double and triple stacking faults in 3C-SiC are studied by molecular dynamics simulations. The stability of PD complexes is demonstrated to depend primarily o...
We study the structural and mobility properties of edge dislocations in rare-gas crystals with the hexagonal close-packed (hcp) structure by using classical simulation techniques. Our results are discussed in the light of recent experimental and theo...
In this study, the three internal variables model (3IVM) for dislocation density evolution is further developed into the advanced ABC (advABC) model to simulate the thermo-mechanical behavior of high-purity aluminum (5N). In contrast to conventional...
This paper reviewed the research progress of studies on the crystal rotation of single crystals that were deformed by tension and shear and the influences of crystal rotation and dislocation evolution on strain hardening behavior in crystals that wer...
In this paper, the mechanical response mechanism and damage behavior of a railway tunnel lining structure under reverse fault dislocation were studied. The damage behavior of railway tunnel linings under reverse fault dislocation was validated by und...
Ultrasound is widely used in the treatment of materials. Its applications in melt processing, surface hardening or finishing, metal forming, welding, etc., are well known and have been reviewed in numerous review articles and books. Among ultrasound-...
The influences of applied pressure on the structure, mechanics, dislocation, and electronics properties of an FeTi hydrogen storage alloy are theoretically investigated via first-principles calculations. The lattice parameter ratio, elastic constant,...
Bonding technology can be an important component of packaging for photonic chips, such as electro-optic (EO) modulators and other active function devices. In general, an EO modulator chip can achieve a broader 3 dB EO bandwidth than its packaging dev...
The interactions between dislocations (dislocations and deformation twins) and boundaries (grain boundaries, twin boundaries and phase interfaces) during deformation at ambient temperatures are reviewed with focuses on interaction behaviors, boundary...
Dislocation structures can be directly related to the fatigue properties of metals, such as fatigue strength, including the fatigue limit and saturation stress. We present an indirect dislocation-structure-based method to evaluate the local stresses...
In this review article, we discuss the rheological properties of the thermotropic smectic liquid crystal 8CB with focal conic domains (FCDs) from the viewpoint of structural rheology. It is known that the unbinding of the dislocation loops in the sme...
The introduction of directional solidified cast mono silicon promised a combination of the cheaper production via a casting process with monocrystalline material quality, but has been struggling with high concentration of structural defects. The SMAR...
In superalloys, topologically close–packed (TCP) phases, which contain refractory elements, usually significantly influence the mechanical properties. The current work investigates the structure and composition of the TCP phase in an Al–M...
The microstructure of additively manufactured 316L stainless steel is hierarchical, and on a fine scale, it contains cell structures and dislocations. These microstructures define the mechanical properties, and it is thus of importance to quantify th...
The complex thermal cycles during the solidification process in metal additive manufacturing (AM) lead to the formation of high-density dislocation networks, organizing into submicron-scale cellular structures. These ultrafine structures are recogniz...
In this work, using the Cu–Ni (111) semi-coherent interface as a model system, we combine atomistic simulations and defect theory to reveal the relaxation mechanisms, structure, and properties of semi-coherent interfaces. By calculating the generaliz...
In this work, a novel method is put forward to quantitatively simulate the subsurface damages microstructural alteration of titanium alloy components subjected to microscale cutting. A trans-scale numerical framework is conducted with the purpose of...
Fault dislocation severely threatens the safety of a tunnel structure. Formerly, researchers mainly engaged in the mechanical response of mountain tunnels crossing the fault fracture zone. In contrast, few studies have focused on the structural stres...
Postseismic deformation observed by terrestrial Global Navigation Satellite System (GNSS) and seafloor GNSS-Acoustic techniques (GNSS-A) provides essential constraints on the depth-dependent viscoelastic structure of subduction zones. In this study,...
The development of metal nanocomposites reinforced by carbon nanotubes (CNTs) remains a focus of the scientific community due to the growing need to produce lightweight advanced materials with unique mechanical properties. However, for the successful...
In recent decades, great efforts have been made to significantly improve the performance characteristics of high-speed steel using various surface hardening techniques. Electron beam modification is engaging because it has an exceptionally high therm...
The evolution of the structure–phase states and the dislocation substructure of rail steel under uniaxial compression to the degree of 50% was studied by transmission electron microscopy. The obtained data formed the basis for a quantitative an...
The analysis of structure and defective substructure of rail steel in uniaxial compression to a degree of 50% is carried out. It is revealed that cold hardening has a multi-stage character and is accompanied by fragmentations of pearlite grains which...
Exsolution and dislocation microstructures are an important basis to decipher the conditions of metamorphic deformation and evolution processes of its host minerals and rocks. The grossular-rich exsolution in pyrope-rich garnet grains of Bixiling oro...
Laser Powder Bed Fusion (LPBF) technology exhibits significant advantages in the manufacturing of components with high dimensional accuracy and intricate internal cavities. However, due to the inherent room-temperature brittleness and high-temperatur...
Beam deflection experiments were used to systematically examine size effects on the low cyclic fatigue (LCF) deformation behaviour of micro-sized bending beams of copper (Cu) single crystals oriented for single slip, critical and coplanar double slip...
This study explores the mechanical properties of graphene/aluminum (Gr/Al) nanocomposites through nanoindentation testing performed via molecular dynamics simulations in a large-scale atomic/molecular massively parallel simulator (LAMMPS). The simula...
In this work, both numerical simulations and experimental characterization were used to obtain a broad understanding of the thermo-mechanical history, residual stress, and microstructure of the directed energy deposition (DED) process of austenitic s...
Strained silicon (ε-Si) is a promising material that could extend Moore’s law by enhancing electron mobility. A ε-Si material is usually composed of multiscale, multilayer heterostructures, where the strained-silicon film or str...
Additively manufactured face-centered-cubic high entropy alloys have a combination of high strength and good ductility, and are promising impact-resistant structural materials. However, the dynamic behavior of additively manufactured face-centered-cu...
Alumina (α-Al2O3) is one of the representative high-temperature structural materials. Dislocations in alumina play an important role in its plastic deformation, and they have attracted much attention for many years. However, little is known about the...
Constructing multi-dimensional hierarchical superstructures has been, for a longtime, regarded as a promising strategy for modifying the physiochemical properties of nanomaterials. Guided by this rule, this work reports the synthesis of hierarchical...
The work-hardening behavior of Cu–Ni alloys with high stacking-fault energies (SFEs) is experimentally investigated under uniaxial compression. It is found that, with the increase of Ni content (or short-range clustering, SRC), the flow stress...
The deformation structures formed in an Al-0.1Mg single-phase aluminium alloy have been studied during plane strain compression (PSC) down to liquid nitrogen temperature, following prior equal channel angular extrusion (ECAE) to a strain of ten. Unde...
Spinodoid nanocubes, inspired by spinodal decomposition, feature bicontinuous dual-phase architectures with high interfacial area, offering a promising platform for tuning nanoscale mechanics. In the present study, classical molecular dynamics simula...
of 27