Skip to Content

475 Results Found

  • Article
  • Open Access
9 Citations
4,721 Views
25 Pages

25 August 2020

To study the effect of material properties on the surface morphology of potassium dihydrogen phosphate (KDP) crystals, an ultra-precision fly cutting machine tool with a single-point diamond tool was used to perform a cutting experiment on (100) crys...

(This article belongs to the Special Issue Ultra Precision Technologies for Micromachining, Volume II)
  • Article
  • Open Access
8 Citations
1,912 Views
21 Pages

8 October 2024

This paper examined the surface morphology of maple and beech cut through by CO2 laser under different angles relative to the wood grain: 0°, 15°, 30°, 45°, 60°, 75°, and 90°. In the analysis, stylus measurements, stereo-m...

(This article belongs to the Special Issue Wood Treatments and Modification Technologies—2nd Edition)
  • Article
  • Open Access
27 Citations
2,717 Views
19 Pages

16 April 2024

Although chip morphology changes according to the machining method and related cutting parameters, chip formation affects the quality of the machined surface. In this context, it is very important to understand the relationship between chip morpholog...

(This article belongs to the Special Issue Advanced Machining Technology for Modern Engineering Materials (2nd Edition))
  • Article
  • Open Access
5 Citations
3,905 Views
17 Pages

4 January 2020

Recently, there is growing interest in optimisation of finishing process thanks to the technologies to follow online the wear of cutting tools. In the present paper, one of the cheapest and simplest non-contact methodologies is described in detail an...

  • Article
  • Open Access
1,647 Views
17 Pages

An Investigation on the Effect of Mango Seed and Pongamia Oil-Based Cutting Fluids on Surface Morphology During Turning of AISI 304 Steel

  • Aneesh Mishra,
  • Vineet Dubey,
  • Deepak K. Prajapati,
  • Usha Sharma and ,
  • Siddharth Yadav and
  • Anuj Kumar Sharma
  • + 1 author+ 0 author

In today’s industrial applications, cutting fluids have attained prime importance due to their all-round features, including increase of tool life by lubrication of the tool at the tool–workpiece interface. This study compares the effects...

  • Article
  • Open Access
18 Citations
5,700 Views
17 Pages

The titanium alloy Ti-6Al-4V ELI is most commonly used for medical implant products because it is corrosion resistant, high strength, and lightweight. In actuality, the temperature will be very high during the machining of this material. This will ac...

  • Article
  • Open Access
27 Citations
8,125 Views
14 Pages

27 March 2015

Ductile cutting are most widely used in fabricating high-quality optical glass components to achieve crack-free surfaces. For ultra-precision machining of brittle glass materials, critical undeformed chip thickness (CUCT) commonly plays a pivotal rol...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
12 Citations
4,002 Views
14 Pages

Cutting Chatter in Ultrasonic Elliptical Vibration Cutting and Its Influence on Surface Roughness and Tool Wear

  • Gan Li,
  • Jinbo Liu,
  • Yanan Pan,
  • Yan Bao and ,
  • Sen Yin,
  • Zhigang Dong and
  • Renke Kang
  • + 2 authors+ 0 author

7 June 2023

Ultrasonic elliptical vibration cutting has a wide range of applications in the field of precision cutting of difficult-to-machine metal materials. However, due to its intermittent cutting characteristics and the weak rigidity of the horn, cutting ch...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
2,300 Views
15 Pages

Effect of Cryo-Treated Cutting Tool End Milling on Custom 450 Stainless Steel

  • C. Devi,
  • Siva Kumar Mahalingam,
  • Robert Cep and
  • Karel Kouril

30 June 2023

Custom 450 stainless steel is the most desirable material across industries due to its widespread application in the aerospace, defense and marine industries. Stainless-steel materials are challenging to deal with and fall into the list of hard-to-pr...

  • Article
  • Open Access
11 Citations
3,919 Views
19 Pages

20 March 2023

Magnesium alloys have broad applications, including medical implants and the aerospace sector owing to their great density and high strength-to-weight ratio. Dry cutting is a frequent technique for machining this material. However, it always leads to...

(This article belongs to the Section Biobased and Biodegradable Metals)
  • Article
  • Open Access
24 Citations
3,100 Views
15 Pages

Experimental Study on Cutting Force and Surface Integrity of TC4 Titanium Alloy with Longitudinal Ultrasonic-Assisted Milling

  • Qingqing Lü,
  • Yongbo Chai,
  • Liquan Yang,
  • Xiaodong Liu and ,
  • Guangxi Li and
  • Daohui Xiang
  • + 1 author+ 0 author

2 October 2023

The ultrasonic vibration-assisted milling process was used to study the difficult-to-machine aerospace material titanium alloy TC4 and explore the milling parameters that fit the processing. Based on the orthogonal experimental method, the changes in...

(This article belongs to the Special Issue Recent Advances in the Machining of Metals and Composites)
  • Article
  • Open Access
45 Citations
4,490 Views
36 Pages

3 December 2020

In this paper, a two-dimensional orthogonal cutting simulation model of SiCp/Al composite was established. The geometry and material constitutive model of the particle, the matrix, and the interface layer have been modeled respectively. In view of th...

  • Article
  • Open Access
41 Citations
5,909 Views
30 Pages

Hard Turning Performance Investigation of AISI D2 Steel under a Dual Nozzle MQL Environment

  • Rajashree Mallick,
  • Ramanuj Kumar,
  • Amlana Panda and
  • Ashok Kumar Sahoo

In recent years, hard turning has emerged as a burgeoning cutting technology for producing high-quality finishing of cylindrical-shaped hardened steel for a variety of industrial applications. Hard turning under dry cutting was not accepted because o...

(This article belongs to the Special Issue Minimum Quantity Lubrication: Environmental Alternatives in Processing)
  • Article
  • Open Access
10 Citations
4,845 Views
9 Pages

12 August 2018

Carbon fiber reinforced plastic (CFRP) is typically hard to process, because it is easy for it to generate processing damage such as burrs, tears, delamination, and so on in the machining process. Consequently, this restricts its wide spread applicat...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
6 Citations
3,014 Views
12 Pages

Laser Cutting of Non-Woven Fabric Using UV Nanosecond Pulsed Laser

  • Jiajun Fu,
  • Chao Liu,
  • Runhan Zhao,
  • Huixin Wang and ,
  • Zhongjie Yu and
  • Qinghua Wang
  • + 1 author+ 0 author

17 November 2024

The efficient cutting of non-woven fabric shows great significance to the development of the textile industry. In recent years, laser cutting technology has been widely applied in the clothing industry due to its high efficiency and cutting quality....

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
1 Citations
850 Views
26 Pages

29 January 2026

Diamond wire sawing, as the core process for monocrystalline silicon wafering, has gained widespread application in the photovoltaic and microelectronics industries due to its high efficiency and low material loss. This study investigates the cutting...

(This article belongs to the Special Issue Novel Processes for Cutting, Grinding and Polishing of Microstructured Surfaces)
  • Article
  • Open Access
4 Citations
2,040 Views
31 Pages

Analysis of Face Milling of Hard Steel 55NiCrMoV7 by Studying Rough and Semi-Finished Machining and the Influence of Cutting Parameters on Macroscopic Chip Dimensions

  • Claudiu Ionuţ Malea,
  • Eduard Laurenţiu Niţu,
  • Daniela Monica Iordache,
  • Ştefan Lucian Tabacu and ,
  • Aurelian Denis Negrea and
  • Claudiu Bădulescu
  • + 1 author+ 0 author

11 July 2024

Hard milling is being increasingly used as an alternative to EDM due to its high productivity. The present paper presents the results of theoretical-experimental research on the face milling of hard steel 55NiCrMoV7. A comprehensive analysis of cutti...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
42 Citations
5,054 Views
19 Pages

Investigation on the Performance of Coated Carbide Tool during Dry Turning of AISI 4340 Alloy Steel

  • Naresh Kumar Wagri,
  • Neelesh Kumar Jain,
  • Anand Petare,
  • Sudhansu Ranjan Das and ,
  • Mohammed Y. Tharwan,
  • Abdulkarim Alansari,
  • Bader Alqahtani,
  • Majed Fattouh and
  • Ammar Elsheikh
  • + 4 authors+ 0 author

10 January 2023

The machinability of materials is highly affected by their hardness, and it affects power consumption, cutting tool life as well as surface quality while machining the component. This work deals with machining of annealed AISI 4340 alloy steel using...

(This article belongs to the Special Issue Machining and Surface Properties of Steel Parts)
  • Article
  • Open Access
6 Citations
2,068 Views
10 Pages

Experimental Study on the Grinding of an Fe-Cr-Co Permanent Magnet Alloy under a Small Cutting Depth

  • Ningchang Wang,
  • Feng Jiang,
  • Jianhui Zhu,
  • Yuchun Xu and ,
  • Chaoyu Shi,
  • Heliang Yan and
  • Chunqing Gu
  • + 2 authors+ 0 author

26 August 2022

A small cutting depth is the key parameter to realize precision in the machining process. The stability of the machining process will directly affect the quality of machining. In this study, dry grinding experiments using an Fe-Cr-Co permanent magnet...

(This article belongs to the Special Issue Advances in Micro and Nano Manufacturing: Process Modeling and Applications, Volume II)
  • Article
  • Open Access
15 Citations
3,023 Views
15 Pages

Experimental Study on Ultrasonic Assisted Turning of GH4068 Superalloy

  • Renke Kang,
  • Pengnan Zhang,
  • Zhaocheng Wei,
  • Zhigang Dong and
  • Yidan Wang

5 May 2023

GH4068 superalloy is a new type of nickel-based superalloy in the aerospace field. It is an important alloy material for the manufacture of aircraft tubular components and aero-engine hot-end components. These components need to be machined with good...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
15 Citations
6,854 Views
16 Pages

14 August 2013

Being subjected to a high-pressure abrasive water jet, solid samples will experience an essential variation of both internal stress and physical characteristics, which is closely associated with the kinetic energy attached to the abrasive particles i...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
61 Citations
6,607 Views
14 Pages

26 February 2023

Using cutting fluids is considered in industrial applications and academia due to their increased influence over many aspects such as machinability, sustainability and manufacturing costs. This paper addresses the machinability perspective by examini...

(This article belongs to the Special Issue Methods of Application of Cutting Fluids in Machining)
  • Article
  • Open Access
1 Citations
1,783 Views
30 Pages

12 February 2025

In the present research, the AlZnMgCu1.5 alloy was machined via an industrial-type Nd-YAG laser cutting process. The Box–Behnken design of response surface methodology was used to plan the trials. The experiments were carried out by varying the...

  • Article
  • Open Access
27 Citations
6,716 Views
14 Pages

Final Heat Treatment as a Possible Solution for the Improvement of Machinability of Pb-Free Brass Alloys

  • Anagnostis I. Toulfatzis,
  • George A. Pantazopoulos,
  • Constantine N. David,
  • Dimitrios S. Sagris and
  • Alkiviadis S. Paipetis

25 July 2018

Heat treatment was performed in order to improve the machinability of three lead-free extruded and drawn brasses, namely CuZn42 (CW510L), CuZn38As (CW511L), and CuZn36 (C27450), based on the concept of microstructural modification. The examined machi...

(This article belongs to the Special Issue Non-Ferrous Metallic Materials)
  • Article
  • Open Access
5 Citations
4,180 Views
13 Pages

Piezosurgery versus Reciprocating Saw: Qualitative Comparison of the Morphology of Cutting Surfaces in Ex Vivo Human Bone

  • Alexandre Anesi,
  • Sara Negrello,
  • Marta Checchi,
  • Mattia Di Bartolomeo and ,
  • Roberta Salvatori,
  • Francesco Cavani,
  • Carla Palumbo and
  • Marzia Ferretti
  • + 3 authors+ 0 author

6 March 2024

The aim of this study was to morphologically evaluate the differences in the cutting surfaces of bone segments obtained by reciprocating saw (RS) and two piezosurgical devices (Piezosurgery Medical—PM—and Piezosurgery Plus—PP) in ex...

(This article belongs to the Special Issue Dental Materials: Latest Advances and Prospects, Third Edition)
  • Article
  • Open Access
16 Citations
7,725 Views
18 Pages

27 October 2017

This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varyin...

(This article belongs to the Special Issue Metals Machining – Recent Advances in Experimental and Modeling of the Cutting Process)
  • Proceeding Paper
  • Open Access
2 Citations
1,921 Views
7 Pages

Investigation into the End-Milling Parameters of Mg/B4C Metal Matrix Composites

  • K. S. Vijaysekar,
  • K. Gobivel,
  • Chithirai Pon Selvan,
  • M. Krishnanand and ,
  • E. Malarmathi,
  • N. Mohamed Saajid and
  • A. Mohanraj
  • + 2 authors+ 0 author

5 February 2024

The automotive, biomedical, and aerospace industries are attracted towards magnesium-based alloys and composites because they are among the lightest structural materials available and have significantly enhanced mechanical and physical characteristic...

(This article belongs to the Proceedings of The International Conference on Processing and Performance of Materials (ICPPM 2023))
  • Proceeding Paper
  • Open Access
1 Citations
1,197 Views
5 Pages

Eco-Friendly Machining of Ni-Based Superalloy with High-Velocity Mist Nozzle

  • Bikash Chandra Behera,
  • Aezeden Mohamed and
  • Kamalakanta Muduli

In the manufacturing sector, there is a constant effort to improve procedures to produce high-quality goods at a lower cost. Academics are improving aspects of the metal machining process to increase efficiency. New techniques have been developed to...

(This article belongs to the Proceedings of The 5th International Conference on Innovative Product Design and Intelligent Manufacturing Systems (IPDIMS 2023))
  • Article
  • Open Access
3 Citations
4,277 Views
19 Pages

Production industries create high-quality products through effective machining precision, lead times, productivity, cost benefits, and implementing sustainable manufacturing practices. This study compares the effect of cryogenic CO2 as a cutting flui...

(This article belongs to the Topic Advanced Manufacturing and Surface Technology, 2nd Edition)
  • Article
  • Open Access
12 Citations
5,246 Views
18 Pages

Effect of Cutting Fluid on Milled Surface Quality and Tool Life of Aluminum Alloy

  • Shuoshuo Pang,
  • Wenxiang Zhao,
  • Tianyang Qiu,
  • Weiliang Liu and ,
  • Pei Yan,
  • Li Jiao and
  • Xibin Wang
  • + 2 authors+ 0 author

9 March 2023

The machining process of aluminum alloy usually produces built-up edge and tool sticking problems due to their low hardness and large plastic deformation, which may further affect the machined surface quality and tool life. This paper aims to investi...

  • Article
  • Open Access
15 Citations
3,514 Views
13 Pages

10 December 2022

Surface morphology and surface roughness are very important properties used to assess the quality of grind-hardening surfaces. In this study, grind-hardening tests for 42CrMo steel were designed using the response surface methodology to reveal the su...

(This article belongs to the Topic Materials and Surface Treatment Processes Used for Engineering Applications)
  • Article
  • Open Access
8 Citations
3,192 Views
12 Pages

15 September 2021

In the field of single-point diamond turning (SPDT), machining ferrous metal is an important research topic with promising application. For SPDT of ferrous metal, the influence of lubricant on the workpiece surface morphology remains to be studied. I...

(This article belongs to the Special Issue Frontiers in Ultra-Precision Machining)
  • Article
  • Open Access
2 Citations
3,153 Views
24 Pages

An Experimental Procedure to Study the High-Speed Orthogonal Cutting of Unidirectional GFRP

  • Martina Panico,
  • Luca Boccarusso,
  • Antonio Formisano,
  • Giuseppe Villani and
  • Antonio Langella

The aim of this paper is to establish a valid procedure for better understanding all of the phenomena associated with the high-speed machining of glass fiber-reinforced plastic (GFRP) composites. Both rectangular and circular specimens were machined...

  • Article
  • Open Access
14 Citations
3,041 Views
13 Pages

Experimental Investigation on the Machinability Improvement in Magnetic-Field-Assisted Turning of Single-Crystal Copper

  • Xian Wu,
  • Yu Zhou,
  • Congfu Fang,
  • Laifa Zhu and ,
  • Feng Jiang,
  • Ke Sun,
  • Yuan Li and
  • Yiyang Lin
  • + 3 authors+ 0 author

4 December 2022

The single-point diamond-turning operation is a commonly used method for ultra-precision machining of various non-ferrous materials. In this paper, a magnetic field was introduced into a single-point diamond-turning system, and magnetic-field-assiste...

(This article belongs to the Special Issue Feature Papers of Micromachines in Engineering and Technology 2022)
  • Article
  • Open Access
4 Citations
3,100 Views
16 Pages

An Investigation of the High-Speed Machinability of 7050 Aluminum Alloy Based on Different Prefabricated Crystal Orientations

  • Chenbing Ni,
  • Wei Lu,
  • Youqiang Wang,
  • Chengguo Zong and ,
  • Dejian Liu and
  • Guoliang Liu
  • + 1 author+ 0 author

21 September 2023

This study investigated the high-speed cutting performance of 7050 aluminum alloy with prefabricated crystal orientations under dry-cutting conditions. Three specimens with different crystal orientations were prefabricated using pre-deformations of 1...

(This article belongs to the Special Issue Friction and Wear of Alloys)
  • Article
  • Open Access
270 Views
28 Pages

2 October 2026

Laser-assisted machining offers significant advantages in the machining of difficult-to-cut materials. This paper presents an experimental investigation and FE simulation of laser-assisted turning (LAT) of H13 tool steel in longitudinal and face-turn...

(This article belongs to the Special Issue Machining, Grinding, and Laser Processing of Metallic Materials)
  • Article
  • Open Access
18 Citations
4,840 Views
15 Pages

Experimental and Theoretical Investigations on Diamond Wire Sawing for a NdFeB Magnet

  • Jia Liu,
  • Zhenyu Zhang,
  • Shengzuo Wan,
  • Bin Wu and ,
  • Junyuan Feng,
  • Tianyu Zhang and
  • Chunchen Zhou
  • + 2 authors+ 0 author

22 April 2022

The normal processing of sintered NdFeB magnets, used in many applied fields, involves diamond wire sawing. Due to the fact of its relatively lower hardness and high brittleness, the surface roughness and periodic waviness of the sawed surface have b...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
645 Views
16 Pages

A Molecular Dynamics Study on Cutting-Strategy-Dependent Subsurface Damage in Single-Crystal Silicon During Ultra-Precision Machining

  • Bo Huang,
  • Pengyue Zhao,
  • Liang Qiao,
  • Ruihan Li and ,
  • Meng Li,
  • Shuhan Peng and
  • Huan Liu
  • + 2 authors+ 0 author

22 July 2026

This study investigates the material removal mechanism and the evolution of subsurface damage (SSD) in single-crystal silicon during ultra-precision machining using molecular dynamics (MD) simulations. A three-dimensional MD model was established by...

(This article belongs to the Special Issue Future Trends in Ultra-Precision Machining, Second Edition)
  • Article
  • Open Access
8 Citations
2,513 Views
28 Pages

24 November 2021

Ball-end cutters are widely used for machining the parts of Ti-6Al-4V, which have the problem of poor machined surface quality due to the low cutting speed near the tool tip. In this paper, through the experiments of inclined surface machining in dif...

(This article belongs to the Special Issue Surface Topography Description as a Determinant of Quality and Functionality)
  • Article
  • Open Access
6 Citations
3,284 Views
20 Pages

Molecular Dynamics Simulation Study on the Influence of the Abrasive Flow Process on the Cutting of Iron-Carbon Alloys (α-Fe)

  • Junye Li,
  • Zhenguo Zhao,
  • Junwei Li,
  • Fujun Xiao and ,
  • Rongxian Qiu,
  • Hongcai Xie and
  • Wenqing Meng
  • + 2 authors+ 0 author

22 March 2023

The plastic deformation behavior and microstructural changes in workpieces during ultra-precision machining have piqued the interest of many researchers. In this study, a molecular dynamics simulation of nano-cutting iron-carbon alloy (α-Fe) is...

(This article belongs to the Special Issue Frontiers in Ultra-Precision Machining, Volume II)
  • Article
  • Open Access
15 Citations
4,408 Views
25 Pages

On the Effect of Electron Beam Melted Ti6Al4V Part Orientations during Milling

  • Abdulmajeed Dabwan,
  • Saqib Anwar,
  • Ali M. Al-Samhan and
  • Mustafa M. Nasr

1 September 2020

The machining of the electron beam melting (EBM) produced parts is a challenging task because, upon machining, different part orientations (EBM layers’ orientations) produce different surface quality even when the same machining parameters are employ...

(This article belongs to the Special Issue Electron Beam Treatment Technology in Metals)
  • Article
  • Open Access
12 Citations
2,903 Views
19 Pages

Assessment of the Technological Quality of X5CRNI18-10 Steel Parts after Laser and Abrasive Water Jet Cutting Using Synthetic Index of Technological Quality

  • Marcin Romanowski,
  • Czesław Łukianowicz,
  • Marzena Sutowska,
  • Wojciech Zawadka and ,
  • Danil Yurievich Pimenov and
  • Krzysztof Nadolny
  • + 1 author+ 0 author

24 August 2021

Despite extensive knowledge of the cutting methods described, no universal method has been developed so far for evaluating the technological quality of elements shaped by different cutting processes. The aim of the research described in this article...

(This article belongs to the Section Advanced Composites)
  • Review
  • Open Access
19 Citations
4,699 Views
31 Pages

Tribological Effects of Surface Biomimetic Micro–Nano Textures on Metal Cutting Tools: A Review

  • Zhenwen Sheng,
  • Hui Zhu,
  • Yu He,
  • Bo Shao and ,
  • Zhi Sheng and
  • Suqin Wang
  • + 1 author+ 0 author

Surface microtexture, as a branch of surface engineering, has always been an active research object due to its ability to significantly improve matrix properties. Especially by combining surface microtextures with biomimetics, the concept of surface...

(This article belongs to the Special Issue Bioinspired Composite Interfaces: Responsive Mechanics and Wetting)
  • Article
  • Open Access
9 Citations
5,429 Views
20 Pages

The finite element modeling method has been widely applied in the modeling of the cutting process to characterize the instantaneous and microscale deformation mechanism that was difficult to obtain using physical experiments. The lubrication and cool...

(This article belongs to the Special Issue Advances in High-Performance Machining Operations)
  • Article
  • Open Access
21 Citations
3,728 Views
12 Pages

28 October 2021

A polycrystalline diamond (PCD) tool is employed in cutting various titanium alloys because of its excellent properties. However, improving the cutting performance of titanium alloys is still a challenge. Here, an experimental investigation on the in...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
7 Citations
2,721 Views
19 Pages

Effect of Coating Thickness on Abrasion and Cutting Performance of NCD-Coated Ball Endmills on Graphite Machining

  • Hyeonhwa Lee,
  • Jinsoo Kim,
  • Sungcheul Lee,
  • Jongeun Park and ,
  • Jeongyeon Park and
  • Jongsu Kim
  • + 1 author+ 0 author

16 March 2023

Nano-crystalline diamond (NCD) coating to improve the performance of cutting tools, as the coating thickness varies, the cutting performance and lifespan of the tool varies because the radius of its cutting edge and coating surface roughness are alte...

(This article belongs to the Special Issue Advanced Manufacturing Technology and Systems, 2nd Edition)
  • Review
  • Open Access
43 Citations
6,421 Views
18 Pages

9 December 2018

It has been proved that surface integrity alteration induced by machining process has a profound influence on the performance of a component. As a widely used processing technology, milling technology can process parts of different quality grades acc...

(This article belongs to the Special Issue Fatigue and Fracture Behaviour of Additively Manufactured Mechanical Components)
  • Article
  • Open Access
835 Views
18 Pages

Machining-Induced Surface Deformation Layer and the Impact on Tensile Plasticity of 316L Stainless Steel

  • Bokai Lou,
  • Jing Ni,
  • Jinghui Zhou,
  • Lihua He and ,
  • Zhenbing Cai and
  • Zefei Zhu
  • + 1 author+ 0 author

316L stainless steel is widely used in aerospace components because of its mechanical properties and corrosion resistance. Standard tensile specimens are commonly used to evaluate material behavior, yet their measured tensile response can be affected...

  • Article
  • Open Access
415 Views
24 Pages

Machinability Enhancement of Ti6Al7Nb Biomedical Alloy Through MWCNT-Nanofluid MQL and Vortex Tube-Assisted Side Milling

  • Aqib Mashood Khan,
  • Barlas Gökduman,
  • Erkin Duman,
  • Hasan H. Hijji and ,
  • Yusuf Furkan Yapan,
  • Muhammad Ahmed Khan,
  • Adnan Javed and
  • Alper Uysal
  • + 3 authors+ 0 author

3 September 2026

Ti6Al7Nb biomedical alloy is difficult to machine because its low thermal conductivity and high chemical reactivity promote heat accumulation, high cutting loads, and poor surface quality. This study evaluated the side milling performance of Ti6Al7Nb...

(This article belongs to the Special Issue Latest Developments in Advanced Machining Technologies for Materials)
  • Review
  • Open Access
13 Citations
3,636 Views
28 Pages

22 April 2025

Particle-reinforced Al-based matrix composites have great potential for application in aerospace, automotive manufacturing, and defense due to their high strength, hardness, and excellent wear and corrosion resistance. However, the presence of partic...

of 10