3,299 Results Found

Thin films of mixed MoO₃ and WO₃ were obtained using reactive magnetron sputtering onto ITO-covered glass, and the optimal composition was determined for the best electrochromic (EC) properties. A combinatorial material synthesis approach was applied...

We performed an electrochromic investigation to optimize the composition of reactive magnetron-sputtered mixed layers of zinc oxide and tin oxide (ZnO-SnO₂). Deposition experiments were conducted as a combinatorial material synthesis approach. The bi...

This study presents the first comprehensive investigation establishing the relationship between color consistency and luminous efficacy of radiation (LER) in phosphor-converted light-emitting diodes (LEDs), introducing novel selection criteria for en...

Color-converted micro-light-emitting diode (micro-LED) displays with wide color gamut, high ambient contrast ratio, and fast response time are emerging as a potentially disruptive technology. However, due to limited optical density and thickness of t...

Electrochromic materials carry out redox reactions and change their colors upon external bias. These materials are the primary component in constructing smart windows for energy saving in buildings or vehicles. Enhancing the electrochromic performanc...

Selecting LED retrofits for examination rooms in healthcare buildings involves setting the right balance between lighting quality and energy efficiency. In the case of LEDs incorporated in luminaires used in medical examination rooms, it is essential...

Visible light communications (VLCs) utilizing multi-color light-emitting diodes (LEDs) can achieve a high modulation bandwidth and high-quality illumination compared with phosphor-converted LEDs, which have attracted much attention. However, the spec...

According to the European Union (EU) regulations, EU members are obligated, among others, to improve the energy efficiency in the outdoor lighting sector. One of the ways to consider this fact is to install LED sources in luminaires. Due to the reaso...

Diabetic retinopathy (DR) is a severe complication of diabetes, causing damage to retinal blood vessels due to high blood sugar levels. Early detection is crucial but often requires significant time and expertise from ophthalmologists. While artifici...

In this report, a blue anti-transmission film (BATF) has been introduced to improve the color-conversion efficiency (CCE) and the stability of quantum dot (QD) films. The results indicate that the CCE can be increased by as much as 93% using 15 layer...

Electrochromic devices (ECDs) that allow the modulation of light transmission are very attractive in the research field of energy saving. Here all-in-one gel switchable ECDs based on mixed-valence electroactive compounds were developed. The use of th...

Electrochromic (EC) materials allow for dynamic tuning of optical properties via an applied electric field, presenting great potential in energy-efficient technologies, such as smart windows for effective light and temperature regulation. The precise...

During the later reproductive period of rice growth, the chlorophyll in the leaves degraded, accompanied by the nitrogen (N) transportation from leaves to panicle, resulting in a change in leaf color from green to yellow. This study aimed to investig...

Sensor nodes are characterized by a small size, a low cost, an advanced communication technology, but also a limited amount of energy. Energy efficient strategies are required in such networks to maximize network lifetime. In this paper, we focus on...

Biological neural networks for color vision (also known as color appearance models) consist of a cascade of linear + nonlinear layers that modify the linear measurements at the retinal photo-receptors leading to an internal (nonlinear) representation...

The rising operating temperature of Building-Integrated Photovoltaic (BIPV) systems is a critical factor that limits their electrical efficiency in real building applications. Addressing this issue is essential for improving both the performance and...

In wireless sensor networks, energy efficiency is mainly achieved by making nodes sleep. In this paper, we present the combination of SERENA, a new node activity scheduling algorithm based on node coloring, with TDMA/CA, a collision avoidance MAC pro...

Commercial high-yielding corn hybrids have not been evaluated for their ability to pigment egg yolk. Therefore, the objective of this research was to investigate the effects of commercial hybrids with different carotenoid profiles as the only source...

Polluting species released in industrial-colored effluents contaminate water, degrading its quality and persisting in the aquatic environment; therefore, it must be treated for safe discharge or onsite reuse/recycling to ensure a fresh water supply....

The article deals with the removal of humic substances from surface water in the High Tatras locality and with the reduction in the intensity of water coloration. Four different types of granular activated carbon (Norit 1240, WG12, Filtrasorb TL830,...

White light-emitting diodes (WLEDs) have matched the emission efficiency of florescent lights and will rapidly spread as light source for homes and offices in the next 5 to 10 years. WLEDs provide a light element having a semiconductor light emitting...

For requiring high communication rate and high-quality illumination, multi-color light-emitting diodes (LEDs) have been utilized in visible light communication (VLC) systems and attracted substantial research interests. It should be noted that multip...

Multiple-color reflectors using bichiral liquid crystal polymer films (BLCPFs) are investigated. The BLCPFs consist of alternate layers of two different single-pitch cholesteric liquid crystal (CLC) layers, named CLC#A and CLC#B. The thickness of eac...

Organic light-emitting diode (OLED)-based display products have already emerged in the market and their efficiencies and lifetimes are sound at the comparatively low required luminance. To realize OLED for lighting application sooner, higher light qu...

Energy consumption in the drying industry has made drying an energy-intensive operation. In this study, the drying time, quality properties (color, shrinkage, water activity and rehydration ratio), specific energy consumption (S.E.C), thermal, energy...

In this study, spinning disc (SD) technology was successfully applied to a synthetic water to remove its color. The preliminary data performed in a regular mixing system using a potential adsorptive material, i.e., double-layered hydroxide of a ZnAlL...

The high blue proportion of phosphor-conversion white-light emitting diodes (pc-LEDs), especially of those with higher correlated color temperatures (CCT), raises concern about photochemically induced retinal damages. Although almost all general ligh...

Poly(1,3,5-tris(N-carbazolyl)benzene) (PtnCz) and three copolymers based on 1,3,5-tris(N-carbazolyl)benzene (tnCz) and 2,2′-bithiophene (bTp) were electrochemically synthesized. The anodic P(tnCz1-bTp2) film with a tnCz/bTp feed molar ratio of 1/2 sh...

Light causes damage when it is absorbed by sensitive artwork, such as oil paintings. However, light is needed to initiate vision and display artwork. The dilemma between visibility and damage, coupled with the inverse relationship between color quali...

The possibilities of obtaining efficient building thermal control by means of colored envelopes while maintaining broad aesthetic options have been evaluated. The use of colored bilayers, where the inner layer presents strong solar absorbent or refle...

The application of natural coagulants derived from food byproducts in domestic wastewater tertiary treatment, which contains a number of impurities as suspended colloidal particles, has a potential use as essential substitutes for traditional inorgan...

In this study, copolymers based on 1,3-bis(carbazol-9-yl)benzene (BCz) and three 3,4-ethylenedioxythiophene derivatives (3,4-ethylenedioxythiophene (EDOT), 3,4-(2,2-dimethylpropylenedioxy)thiophene (ProDOT-Me₂), and 3,4-ethylenedithiathiophene (EDTT)...

Three dithienylpyrroles (1-(4-(methylthio)phenyl)-2,5-di(thiophen-2-yl)-pyrrole (MPS), 1-(4-methoxyphenyl)-2,5-di(thiophen-2-yl)-pyrrole (MPO), and 4-(2,5-di(thiophen-2-yl)-pyrrol-1-yl)benzonitrile (ANIL)) were synthesized and their corresponding pol...

The integration of various transition metal oxides into tungsten oxide (WO₃) has been widely investigated to enhance its electrochromic (EC) performance. This approach aims to address the inherent limitations of individual metal oxides, such as poor...

Tris(4-(thiophen-2-yl)phenyl)amine- and dithienylpyrrole-based copolymers (P(TTPA-co-DIT) and P(TTPA-co-BDTA)) were electropolymerized on ITO electrode by applying constant potentials of 1.0, 1.1, and 1.2 V. Spectroelectrochemical investigations reve...

Flexible, intelligent color-changing windows with excellent color-switching capability and fast response time rely significantly on conductive composite layers composed of electrochromic materials and flexible, transparent substrates. Herein, we deve...

Real-time monitoring of cotton moisture status and determination of appropriate irrigation thresholds are essential for achieving precision irrigation. Currently employed diagnostic methods based on physiological indicators, remote sensing, or soil m...

Three carbazole-based conjugated polymers (poly(3,6-di(2-thienyl)carbazole) (PDTC), poly(2,7-bis(carbazol-9-yl)-9,9-spirobifluorene) (PS2CBP), and poly(3,6-bis(N-carbazole)-N-ethylcarbazole) (PCEC)) are synthesized using electrochemical polymerizatio...

The purpose of this study was to investigate the effect of annealing temperature on the structural, morphological, and electrochemical properties of tungsten trioxide (WO₃) films, fabricated via electrodeposition and annealed at 50 °C, 250 °C...

The authors have developed a method to estimate the catch efficiency of sampling gear using acoustic information. Since different sampling conditions will cause different sampling results, it is necessary to know more details about catch efficiency t...

Two homopolymers (poly(indole-6-carboxylic acid) (PInc) and poly(2,2′-bithiophene) (PbT)) and a copolymer (poly(indole-6-carboxylic acid-co-2,2′-bithiophene) (P(Inc-co-bT))) are electrodeposited on ITO electrode surfaces via electrochemical method. E...

The Scattered Photon Extraction (SPE™) based on the concept of TIR lens combined with remote phosphor is proven to be one of the effective solutions for improving white LED efficiency, and it provides the omnidirectional light distribution for...

Electrochromic devices (ECDs) are a promising material for smart windows that are capable of transmittance variation. However, ECDs are still too expensive to achieve a wide market reach. Reducing fabrication cost remains a challenge. In this study,...

A series of carbazole-based polymers (PdCz, P(dCz2-co-dTC1), P(dCz2-co-dTC2), P(dCz1-co-dTC2), and PdTC) were deposited on indium tin oxide (ITO) conductive electrodes using electrochemical polymerization. The as-prepared P(dCz2-co-dTC2) displayed a...

Marble envelopes represent a relatively common architectural solution used in variety of historic, modern and contemporary building facades. White marble envelopes have been shown to reduce solar heat gains, while improving indoor thermal comfort and...

We report the successful synthesis of amorphous titanium-engineered tungsten oxide (WTi) films via a facile and cost-effective electrodeposition method. Unlike conventional high-temperature or vacuum-based techniques, our approach enables a scalable,...

In response to escalating global energy demands and environmental challenges, electrochromic (EC) smart windows have emerged as a transformative technology for adaptive solar modulation. Herein, we report the rational design and fabrication of a bila...

Background: Dental implants enhance masticatory efficiency in edentulous patients, yet discrepancies exist between objective assessments and patient perceptions. This study evaluated masticatory efficiency before and after implant rehabilitation usin...

This article describes an efficient method to generate a color palette for color image quantization. The method consists of two stages. In the first stage, the initial palette is generated. Initially, the color palette is an empty set. First, the N c...

Knowledge of spectral sensitivity is important for high-precision comparison of images taken by different cameras and recognition of objects and interpretation of scenes for which color is an important cue. Direct estimation of quantum efficiency cur...