The paper presents the research of adsorptive properties of activated carbons to chromium (VI) removal from the water solution. Different types of carbon were investigated: WD-ekstra (WDA), WD-ekstra modified by salt acid WD(HCl) and nitrogen acid WD...
Chromium (VI) is carcinogenic through intermediates formed in the cellular milieu by reduction with small reductants like glutathione (GSH), ascorbate, cysteine, and NADPH. Although the reduction of chromate by thiols has been investigated, the parti...
This study aims to determine the main adsorption mechanism by which chromium (VI) is adsorbed onto the surface of a petroleum-coke sourced activated carbon, a feedstock not prevalent in current literature. The study also aims to produce an activated...
Chromium(VI) is a well-known hazardous element, thus, its removal from aqueous sources is of a general concern. Among the technologies used for the removal of this type of toxic elements, liquid membranes are gaining in importance and the same has oc...
An evaluation of the chromium(VI) adsorption capacity of four magnetite sorbents coated with a polymer phase containing polymethacrylic acid or polyallyl-3-methylimidazolium is presented. Factors that influence the chromium(VI) removal such as soluti...
We combined a nickel–aluminum–zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared t...
We investigated the application of an adsorbent fabricated from satsuma mandarin peel biomass using coating with poly(glycidyl methacrylate) followed by sequential treatment with hydroxylamine and hydrochloric acid for the remediation of hexavalent c...
The sorption process of chromium(VI) and cadmium(II) onto avocado peel (AP) and its pyrolyzed version (PAP) was carried out. The pyrolysis process was investigated in a tube furnace under inert gas conditions (argon) using a temperature equal to 750...
The presence of inorganic pollutants such as Cadmium(II) and Chromium(VI) could destroy our environment and ecosystem. To overcome this problem, much attention was directed to microbial technology, whereas some microorganisms could resist the toxic e...
Chabazite, a tectosilicate mineral, belongs to the zeolite group and has been widely used for the adsorptive removal of a number of cationic contaminants from the aqueous phase. However, a negatively charged chabazite surface can be altered by chemic...
An investigation of chromium(VI) transport across a supported liquid membrane containing the phosphine oxides Cyanex 921 and Cyanex 923 dissolved in Solvesso 100 as carrier phases was carried out in batch operation mode. Chromium(VI) transport was in...
The removal of chromium(VI) from an acidic (HCl) medium through non-dispersive extraction with strip dispersion (NDXSD) was investigated using a microporous PVDF membrane support in a permeation cell. The ionic liquid Cyphos IL102 (phosphonium salt)...
The study aims to promote environmental restoration by shedding light on the potential use of moringa waste as an inexpensive, eco-friendly adsorbent for treating wastewater contaminated with Chromium (VI). FTIR was used to characterise the surface f...
The chemical degradation of an extraction solvent composed of a mixture of tri-n-octylamine (extractant) and 1-tridecanol (phase modifier) in n-dodecane in contact with an acidic aqueous sulfate solution containing chromium(VI) has been investigated....
This study investigates the synthesis and characterization of alkyne-based multilayered three-dimensional (3D) polymers, which exhibit a subtle aggregation-induced emission (AIE) phenomenon. The polymers demonstrate significant potential as fluoresce...
Polyamidoamine hydrogels prepared by the radical post-polymerization of α,ω-bisacrylamide-terminated M-AGM oligomers, in turn obtained by the polyaddition of 4-aminobutylguanidine with N,N’-methylenebisacrylamide, were reinforced wi...
The removal of hexavalent chromium has attracted much attention as it is a hazardous contaminant. Electrochemical reduction technology was applied to remove chromium (VI) from wastewater. The mechanisms and parameters that affect the reduction proces...
The adsorption of chromate on octacalcium phosphate (OCP) was investigated as a function of contact time, surface coverage, and solution pH [...]
In this work, biopolymer chitosan and natural clay were used to obtain composite materials. The overall aim of this study was to improve the properties (porosity, thermal stability and density) of pure chitosan beads by the addition of clay and to ob...
Chromium is used in many settings, and hence, it can easily enter the natural environment. It exists in several oxidation states. In soil, depending on its oxidation-reduction potential, it can occur in bivalent, trivalent or hexavalent forms. Hexava...
Microplastics (MPs) and hexavalent chromium (Cr(VI)) are typical environmental pollutants, yet their interactions in aquatic systems remain poorly understood. This study investigates the mutual influence between Cr(VI) and both virgin and aged polyst...
Ten representative (dichloroiodo)arenes, ArICl2, were prepared from the corresponding arenes and diiodine in variable anhydrous mixtures, ArH/I2/CrO3/AcOH/Ac2O/conc. H2SO4, followed by the addition of conc. hydrochloric acid, used as the source of ch...
REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) regulations demand for an expedient discovery of a Cr(VI)-free alternative corrosion protection for light alloys even though the green alternatives might never be as cheap a...
Industrial effluents from chromium-based products lead to chromium pollution in the environment. Several technologies have been employed for the removal of chromium (Cr) from the environment, including adsorption, ion-exchange, bioremediation, etc. I...
The presence of Cr (VI) in drinking water is mainly caused by leaching of chromium-containing aquifer material into groundwater. In contrast to Cr (III), it has been classified as highly toxic. For this reason, the WHO recommends the implementation o...
Magnetic polymer microspheres (MPMs) using glycidylmethacrylate (GMA) as a functional monomer were synthesized in the presence of Fe3O4 nanoparticles via dispersion polymerization. After polymerization, the magnetic polymer microbeads were modified w...
To evaluate the feasibility of nickel–aluminum (the Ni2+:Al3+ molar ratios of 1.0:1.0 and 1.0:2.0 are denoted as NA11 and NA12, respectively) and nickel–aluminum–zirconium type (the Ni2+:Al3+:Zr4+ molar ratios of 0.9:1.0:0.09 and 0.9:2.0:0.09 are den...
Chromium (as Cr(VI)) and fluoride (F−) are frequently found in effluents from different industrial activities. In cases where these effluents reach soil, it can play an important role in retaining those pollutants. Similarly, different byproduc...
The highly toxic Cr(VI) is a critical component in the Chromated Copper Arsenate (CCA) formulations extensively employed as wood preservatives. Remediation of CCA mixed waste and discarded treated wood products is a significant challenge. We demonstr...
21 January 2020
A laboratory-scale study was carried out to evaluate the groundwater bioremediation potential of hexavalent chromium (Cr(VI)), taking into account the chromate pollution of an industrial site located in Southern Italy (Apulia Region). The reduction o...
Chromium is a toxic and carcinogenic heavy metal that originates from various human activities. Therefore, the effective removal of chromium from aqueous solutions is an extremely important global challenge. Herein, we report a chitosan-coated iron o...
The escalating issue of water pollution driven by rapid industrialization necessitates the development of advanced remediation technologies. In this study, a novel method for producing chromium (Cr(VI)) ion-imprinted biochar (Cr(VI)-IIP-PEI@NBC) from...
Algal biomass from Spirulina platensis has been tested for the adsorption of chromium (VI) in aqueous effluents. The study was conducted using a central composite experimental design. The selected variables were: biomass (0.25–0.75 mg), initial...
Graphitic-C3N4 nanosheets (CN)/ZnO photocatalysts (CN/ZnO) with different CN loadings were successfully prepared via a simple precipitation-calcination in the presence of exfoliated C3N4 nanosheets. Their morphology and structure were thoroughly char...
Metal–organic frameworks (MOFs) have recently received a lot of interest for their use in adsorbing and eliminating hexavalent chromium from water. Obtaining low-cost, biocompatible, and environmentally friendly MOFs for research in this field...
The physicochemical characteristics of biogenic minerals, such as high specific surface areas and high reactivity and the presence of a bacterial carrier matrix, make them promising for various applications. For instance, catalysts, adsorbents, oxida...
In this study, chitosan beads modified with sodium dodecyl sulfate (SDS) were successfully synthesized and employed for the removal of chromium(VI) (Cr(VI)). The adsorption performance of the adsorbent (SDS-chitosan beads) was examined by batch exper...
Water pollution caused by hexavalent chromium (Cr(VI)) ions represents a serious hazard for human health due to the high systemic toxicity and carcinogenic nature of this metal species. The optical sensing of Cr(VI) through specifically engineered na...
Biosorption of chromium (Cr(VI)) is studied by using raw (chemically not modified) Moringa (Moringa Oleifera) leaf powder without any pretreatment. Cr(VI) is one of the potentially harmful heavy metals found in industrial wastewater. In the Moringa l...
By considering the importance of water and its purity, herein, a powerful adsorbent has been developed for the adsorption of two toxic contaminants that commonly exist in water, viz., divalent mercury and hexavalent chromium. The efficient adsorbent,...
Hexavalent chromium (Cr(VI)) is a ubiquitous environmental pollutant, which poses a threat to human public health. Recent studies have shown that mitochondrial biogenesis can be activated by inflammatory and oxidative stress. However, whether mitocho...
Cr(VI) is considered to be the most hazardous and toxic oxidation state of chromium and hence the development of effective removal technologies, able to provide water with Cr(VI) below the drinking water limits (US EPA 100 μg/L, European Commissio...
The overuse of chromium (Cr) has significantly negatively impacted human life and environmental sustainability. Recently, the employment of nano zero-valent iron (nZVI) for Cr(VI) removal is becoming an emerging approach. In this study, carbonized me...
In the presented article, an electrocoagulation method using a steel cathode and a steel anode was used to obtain chromium from laboratory-prepared model solutions with known compositions. The study aimed to analyze the effect of solution conductivit...
The paper presents the mode in which an accredited laboratory, according to SR EN ISO/IEC 17025, monitors its performance by comparing the results with the results of other laboratories. This article aims to analyse the results of the participation o...
Elevated hexavalent chromium (Cr(VI)) levels in pervious concrete may undermine its successful application in water treatment. Portland cement CEM I 52.5R (CEM I), coal fly ash (FA), natural zeolite and ground granulated blast-furnace slag (GGBS) wer...
Polypyrrole-gelatin aerogels, containing magnetic barium ferrite (BaFe) particles, (PPy-G-BaFe) were synthesized by oxidative cryopolymerization and used as adsorbents for the removal of Cr(VI) from aqueous media. The removal was performed at pH 4, w...
Hexavalent chromium is a highly soluble environmental contaminant. It is a widespread anthropogenic chromium species that is 100 times more toxic than trivalent chromium. Leather, chrome plating, coal mining and paint industries are the major sources...
Hydrogels find applications in various fields, and the ever-growing spectrum of available monomers, crosslinking, and nanotechnologies widen the application of polymer hydrogels. Herein, we describe the preparation of a new graphene (G)- and polyanil...
Sorptive removal of hexavalent chromium (Cr(VI)) bears the advantages of simple operation and easy construction. Customized polymeric materials are the attracting adsorbents due to their selectivity, chemical and mechanical stabilities. The mostly in...
of 12