138 Results Found

Powder bed 3D printing can be applied to sandcasting mold manufacturing to ensure high quality and economy through process innovation. In this study, refractory alumina cement was used as an aqueous binder to ensure high-temperature thermal stability...

Based on a novel ternesite sulphoaluminate cement (NTSAC), the effects of various influencing factors on the calcination of clinker were studied, including mineral composition of clinker, grinding fineness of raw materials, molding technology of samp...

This study presents the results of research on the use of Portland cement as a binder for producing semi-permanent molds intended for large-scale castings made from complex alloyed steels. Based on the conducted experiments, the optimal composition o...

With the development of the powder bed 3D printing process, sand casting can be performed with methods that are more advanced than the traditional ones, thus enabling new research on applied materials. When sand is 3D-printed with cement as a binder,...

Osteosarcoma is one of the most common primary bone malignancies, typically occurring around the knee. However, the forearm is a rare site, with tumors in the proximal ulna being extremely uncommon. Primary sarcoma in this location presents a surgica...

Cement stabilized macadam semi-rigid base materials are widely used in road construction in China. However, a traditional static molding method and heavy compaction method cannot guide the design and engineering application of cement stabilized macad...

The mechanical properties of cement-stabilized macadam (CSM) base mixture are closely related to its forming process. Although the present study investigates the macroscopic effects of molding on cement-stabilized macadam, mesoscopic research analyse...

Making consistent and precise octahedral pressure media is crucial for reproducible high-pressure experiments in the multi-anvil press. Here we report a new approach of casting octahedra using 3D-printed molds, and pressure calibrations for octahedra...

The dry stacking of filtered tailings is an option to deal with safety-related issues involving traditional slurry disposition in impoundments. Filtered tailings can be compacted to pre-define design specifications, which minimizes structural instabi...

The sustainability of the construction sector demands the reduction of CO2 emissions. The optimization of the amount of cement in concrete can be achieved either by partially replacing it by additions or by reducing the binder content. The present wo...

The study of the effect of cement type on the action of an admixture increasing the volume of concrete (containing aluminum powder), used in amounts of 0.5–1.5% of cement mass, was presented. The tests were carried out on cement mortars with Portland...

Cement-stabilized rammed earth (CSRE) is a variation of the traditional rammed earth building material, which has been used since ancient times, strengthened by the addition of a stabilizer in the form of Portland cement. This article compares the co...

Cemented carbide is currently used for various precise molds and wear resistant parts. However, the machining of cemented carbide still is a difficult challenge due to its superior mechanical properties. In this paper, an experimental study was condu...

The paper undertakes preliminary research towards the identification of the use of plastic waste, taking into account the possibility of increasing their mechanical strength and reducing flammability, as well as reducing the emission of harmful compo...

Curing by CO2 is a way to utilize CO2 to reduce greenhouse gas emissions. Placing early-age cement paste in a CO2 chamber or pressure vessel accelerates its strength development. Cement carbonation is attributed to the quickened strength development,...

The initial investigation evaluates the feasibility of ultra high performance concrete (UHPC) as a material for reusable molds in aluminum casting. Two specific UHPC formulations were investigated: one based on ordinary Portland cement (OPC) and anot...

The subject matter of this manuscript concerns the analysis and identification of microorganisms that pose a threat to human health and, in particular, mold fungi occurring in historical buildings. Surfaces infected by fungal spores pose a threat to...

The purpose of this study was to compare the efficiency of native rice straw mixed bricks, prototype bricks and brick blocks that are sold in the market. The comparison looked at four aspects, as follows: (1) compression strength, (2) heat absorption...

With the development of prefabricated buildings, complex-shaped cement products, represented by heating-type elevated floors, have appeared on the market. These cement products can only be produced by the pouring method, with low efficiency and poor...

The objective of this study was to examine the optimal mixing ratio of municipal incinerated bottom ash (MIBA) and PET pellets used as a partial replacement of fine aggregates in the manufacture of cement mortars. As a partial replacement for sand, 1...

Periprosthetic Joint Infection (PJI) is a challenging complication after joint replacements, and cement spacers are standard treatment in two-stage revision surgery. This experimental in vitro study aimed to evaluate the elution properties of differe...

Soils from the superficial layers of the Guabirotuba formation (in Brazil) are problematic due to their expansive and low-bearing capacity. Stabilizing these soils with a calcium-based binder is a technique that must be explored. Therefore, this stud...

Cement slurry segregation has a detrimental impact on the cement matrix efficiency in term of zonal isolation. In this study, synthetic modified phyllosilicate (SMP) dispersant, which is known as laponite RD is suggested to reduce the slurry segregat...

A fine-grained WC-15wt%Al0.5CoCrFeNi cemented carbide was prepared through a vacuum and gas pressure sintering. For achieving high surface integrity, diamond wheel grinding serves as the primary molding process for the machining of WC cemented carbid...

This study aimed to investigate the effects of optical properties of lithium disilicate glass ceramics and the light-curing protocols (LCP) on the curing performance of light-cured resin cement. Lithium disilicate glass-ceramics with different optica...

In early 1980s, researchers discovered self-setting calcium orthophosphate cements, which are a bioactive and biodegradable grafting material in the form of a powder and a liquid. Both phases form after mixing a viscous paste that after being implant...

Recently, pollution caused by an increasing amount of worldwide plastic waste has become a global problem. However, these concerns can be alleviated by the use of gamma-ray technology. Using radiation technology, plastic wastes can be converted into...

The development of mold films on the cement surfaces of buildings is a health and safety problem for the population, aesthetic but also in terms of their durability. The use of specific performance of cementitious composites containing TiO2 nanoparti...

The objective was to compare the strain of three calcium silicate cements using an optical system based on the 3D digital image correlation method (3D-DIC). Dentine disks from 30 upper premolars were sectioned transversely to obtain 2 mm-thick sectio...

The traditional cement compaction process boasts notable advantages such as high strength, durability, and aesthetic appeal. However, compaction forming technology for cement products results in high carbon emissions. Consequently, it is imperative t...

Background and Objectives: This study aimed to investigate the effect of zinc phosphate (ZnP) cement, glass ionomer cement (GIC), and nano-integrated bio-ceramic (NIB) cement on mineralization when placed in contact with bone tissue-forming cells. Ma...

The addition of Superabsorbent Polymer (SAP) decreases the effect of autogenous shrinkage present in pastes, mortars, and concretes. In this study we investigated the influence of the addition of SAP in self-compacting cement paste mixtures. Eighteen...

This study investigates the feasibility of establishing an environmentally sustainable ultra-high performance concrete from seawater and sea sand (SWSS-UHPC) which utilizes industrial byproducts (i.e., ground slag and silica fume) by partially substi...

Lightweight concrete is one of the effective means to solve the problems of structural component weight, energy efficiency, and fire safety in modern civil engineering. Heavy calcium carbonate-reinforced epoxy composite spheres (HC-R-EMS) were prepar...

Due to the molding-free property and dry shrinkage of extrusion-based three-dimensional printable concrete (3DPC), the precision issues of 3DPC have not been solved effectively. One of the viable solutions for 3DPC precision improvement is to print u...

Glass fiber reinforced cement (GRC) is an excellent composite for architects and engineers because it can be molded to produce laminar panels or to create complicated designs. GRC is a fine concrete reinforced with alkali-resistant glass fibers at 3&...

The sludge from water treatment plants (WTP) is a waste from the water process. This study evaluated the effect of incorporating water treatment plant (WTP) sludge, replacing the water used in compacted soil–cement mixtures. The materials were...

The main objective of this study is to reduce CO2 emissions resulting from rapidly increasing cement production and utilization rates worldwide. For this purpose, the effects of NS (nano-silica) and SF (silica fume) materials, which are the post-prod...

This study investigates the use of gypsum waste from civil construction as a partial substitute for cement in soil–cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared u...

The application of hydrodynamics to the definition of artificial reefs is of great interest since the positioning of the artificial reef modules on the sea floor alters the water velocity field, causing an appropriate circulation of nutrients and pro...

Manufacturers of building materials strive to optimize the three basic concrete properties—strength, durability, and shrinkage deformation, of which the focus is generally on the durability in the structure when designing and monitoring the pou...

In this study, WC-Co-TiC/304 stainless steel composites were successfully prepared by compression at room temperature and vacuum sintering in a special mold. Through analysis and comparison of the microstructure, density, and particle size of WC-Co-T...

Artificial cementation of granular soils results in improved stabilization, increased stiffness, and greater mechanical strength. The porosity index and volumetric cement content η/Civa is presented as a key measure to study the evolution of diff...

The purpose of this case report was to present the aesthetic result of the reconstruction of facial residual asymmetry after orthognathic surgery using a patient-specific three-dimensional (3D) mold and a custom-made polymethyl methacrylate implant....

This study proposes model formulae for predicting the strength of concrete by analyzing the relationships between the results of nondestructive testing (NDT) methods and the compressive strength of concrete specimens at the hardened stage. Further, N...

In this study, cement minerals, aluminates, and alkali-free accelerators incorporated with steel fiber were used to scrutinize the influence of accelerating agents on the long-term performance of tunneling shotcrete. Performance tests were identified...

Hydroxypropyl Methylcellulose (HPMC) is one of the most frequently used viscosity modifying admixtures in 3D printable cement-based materials. In this study, the effects of HPMC dosage on the mechanical properties of 3D printable cement-based mortars...

This paper studies aligned glass fiber-reinforced composites for printing. To determine the influence of fiber content and alignment on the mechanical properties of this novel material, a large number of standard test specimens were prepared, which i...

This study carried out a comparison between cement grouting and chemical grouting, using epoxy and polyurethane, with respect to their effects on the shear behavior of joints. Joint replicas, with three different grades of surface roughness, were mol...

From the perspective of sustainable waste management and its environmental impact, waste biomass bottom ash (BA) remains problematic and challenging to use as a recycling material for civil engineering infrastructures. This study evaluated the perfor...