Skip to Content

1,112 Results Found

  • Article
  • Open Access
13 Citations
7,809 Views
13 Pages

9 July 2012

The formation of methyl-terminated carboxylic acid self-assembled monolayers (SAMs) with even numbers of carbons, from eighteen to thirty, was investigated on the oxide surface of Ti-6Al-4V and component metal oxides. Modified surfaces were character...

(This article belongs to the Special Issue Titanium Materials for Biomedical Application)
  • Article
  • Open Access
38 Citations
7,112 Views
16 Pages

Wettability after Artificial and Natural Weathering of Polyethylene Terephthalate

  • Annegret Benke,
  • Johanna Sonnenberg,
  • Kathrin Oelschlägel,
  • Markus Schneider and ,
  • Milena Lux and
  • Annegret Potthoff
  • + 1 author+ 0 author

The weathering of plastics is always accompanied by a change in surface properties, especially wettability in the case of water. For plastics weathering in an aquatic environment, wettability plays an important role in transport, sedimentation, and d...

(This article belongs to the Special Issue Plastic Contamination: Challenges and Solutions Volume II)
  • Article
  • Open Access
10 Citations
3,098 Views
18 Pages

Investigation of Adhesion Performance of Wax Based Warm Mix Asphalt with Molecular Dynamics Simulation

  • Chao Peng,
  • Hanneng Yang,
  • Zhanping You,
  • Hongchao Ma and ,
  • Fang Xu,
  • Lingyun You,
  • Aboelkasim Diab,
  • Li Lu,
  • Yudong Hu and
  • Zhibo Li
  • + 7 authors+ 2 authors

27 August 2022

Compared with traditional hot mix asphalt (HMA), wax based warm mix asphalt (WWMA) can be mixed with the aggregate at a lower temperature and achieve the desired compaction. However, the adhesion performance of WWMA on aggregate is uncertain. To eval...

(This article belongs to the Special Issue Experimental Testing and Constitutive Modelling of Pavement Materials)
  • Article
  • Open Access
15 Citations
5,964 Views
18 Pages

Surface Studies of UV Irradiated Polypropylene Films Modified with Mineral Fillers Designed as Piezoelectric Materials

  • Marta Chylińska,
  • Halina Kaczmarek,
  • Dariusz Moszyński,
  • Bogusław Królikowski and
  • Jolanta Kowalonek

4 March 2020

Isotactic-polypropylene (i-PP) films with inorganic minerals such as Sillikolloid, perlite, or glass beads were prepared. The obtained polymeric films were subjected to an orientation process. Moreover, this paper includes results how the artificial...

(This article belongs to the Special Issue Wettabilities and Surface Properties of Polymer Materials)
  • Article
  • Open Access
2,777 Views
32 Pages

Physical and Chemical Properties of Fire-Affected Soils from the Sagebrush Ecosystem of the Western US: A Laboratory Study

  • Yasaman Raeofy,
  • Vera Samburova,
  • Markus Berli,
  • Eden Furtak-Cole and ,
  • Brad Sion,
  • Sally Houseman,
  • Kristine Lu,
  • William Curtiss,
  • Andrew J. Andrade and
  • Hans Moosmüller
  • + 7 authors+ 2 authors

This study aims to understand the effects of wildfires in sagebrush ecosystem on soil properties by examining connections between Soil Water Repellency (SWR), reflectance, and chemistry. Ash and burned soil samples were collected after performing lab...

  • Article
  • Open Access
70 Citations
9,085 Views
25 Pages

Fabrication of Gelatin Nanofibers by Electrospinning—Mixture of Gelatin and Polyvinyl Alcohol

  • Hsiu Yu Chi,
  • Nai Yun Chang,
  • Chuan Li,
  • Vincent Chan and ,
  • Jang Hsin Hsieh,
  • Ya-Hui Tsai and
  • Tingchao Lin
  • + 2 authors+ 0 author

27 June 2022

Gelatin, one of the most abundant, naturally derived biomacromolecules from collagen, is widely applicable in food additives, cosmetic ingredients, drug formulation, and wound dressing based on their non-toxicity and biodegradability. In parallel, po...

(This article belongs to the Special Issue Advanced Electrospinning Technology)
  • Article
  • Open Access
6 Citations
1,710 Views
23 Pages

30 June 2025

Polymer brushes (PBs) are transformative surface-modifying nanostructures, yet their synthesis via controlled methods like copper-mediated surface-initiated atom-transfer radical polymerization (Cu0-SI-ATRP) faces reproducibility challenges due to a...

(This article belongs to the Special Issue State-of-the-Art Polymer Science and Technology in Mexico)
  • Article
  • Open Access
1 Citations
25 Views

Study about Hydrophilic Modification of PTFE Membrane

  • Yu-Hui Zeng,
  • Ting-Ting Zhang and
  • Yi-Ren Chen

Polytetrafluoroethylene (PTFE) membrane is widely used in medicine, clothing, chemical, electronics and other fields. However, due to the highly symmetrical structure of the PTFE, the absence of reactive radical, high crystallinity, low surface energy...

  • Article
  • Open Access
2 Citations
11 Views

Ultrahigh molecular weight polyethylene (UHMWPE) Filaments has a low surface free energy and therefore modification of their surface properties before any use is often needed. Atmospheric pressure plasmas treatment is a convenient and environment fri...

  • Article
  • Open Access
2 Citations
2,548 Views
15 Pages

Surface Hydrophobization of Block-Shaped Wood with Rapid Benzylation

  • Mitsuru Abe,
  • Masako Seki,
  • Tsunehisa Miki and
  • Masakazu Nishida

3 August 2021

With the aim of utilizing wood as a carbon cycle-oriented material, the improvement of hydrophobicity has been actively studied to solve manufacturing problems, such as dimensional stability and biodeterioration resistance. The introduction of benzyl...

(This article belongs to the Special Issue Wood Production and Promotion)
  • Article
  • Open Access
15 Citations
4,109 Views
11 Pages

Study on the Influence of Accelerated Aging on the Properties of an RTV Anti-Pollution Flashover Coating

  • Junwei Chen,
  • Bo Li,
  • Xiaomei Zeng,
  • Zhenggang Li and ,
  • Yi Wen,
  • Quan Hu,
  • Qiu Yang,
  • Mi Zhou and
  • Bing Yang
  • + 4 authors+ 0 author

1 February 2023

The purpose of this work is to study the accelerated aging behavior of a room-temperature vulcanized (RTV) silicone rubber anti-pollution flashover coating. Red, blue and gray RTV rubber samples were selected to prepare coatings on the surface of sta...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
5 Citations
2,281 Views
17 Pages

Fabrication and Characterization of Electrospun DegraPol® Tubes Releasing TIMP-1 Protein to Modulate Tendon Healing

  • Julia Rieber,
  • Roger Khalid Niederhauser,
  • Pietro Giovanoli and
  • Johanna Buschmann

3 February 2025

Background: Tendon rupture repair can result from fibrotic scar formation through imbalanced ECM deposition during remodeling. The tissue inhibitors of matrix metalloprotease (TIMPs) not only decrease ECM degradation, regulated by matrix metalloprote...

(This article belongs to the Special Issue Physico-Chemical Modification of Materials for Biomedical Application)
  • Communication
  • Open Access
38 Citations
7,954 Views
7 Pages

11 January 2019

The properties of a polydimethylsiloxane (PDMS) surface were modified by a one-step deposition of plasma polymerized hexamethyldisilazane (pp-HMDS) by the arc discharge method. Scanning electron microscopy, atomic force microscopy, and Fourier-transf...

(This article belongs to the Special Issue Advances in Organic and Polymeric Coatings )
  • Article
  • Open Access
5 Citations
4,481 Views
11 Pages

27 September 2019

Based on the as-synthesized modified polysiloxane containing pendant long-chain fluoroalkyl and silanoxy (PFAS) in our previous work, an in situ condensation reaction with silica sol was carried out to prepare a fluoroacrylate-modified polysiloxane n...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
11 Citations
3,412 Views
17 Pages

Enhanced Hydrofobicity of Polymers for Personal Protective Equipment Achieved by Chemical and Physical Modification

  • Emilia Irzmańska,
  • Ewa Korzeniewska,
  • Ryszard Pawlak,
  • Mariusz Tomczyk and ,
  • Aleksandra Smejda-Krzewicka and
  • Agnieszka Adamus-Włodarczyk
  • + 1 author+ 0 author

24 December 2021

The article presents significant results in research on creating superhydrophobic properties of materials which can be used as an interesting material for use in self-cleaning polymer protective gloves and similar applications where the superhydropho...

  • Article
  • Open Access
17 Citations
4,695 Views
15 Pages

25 November 2021

A simple and practical spray method is employed to prepare a PVDF/PFOTES-SiO2 superhydrophobic composite coating on the AZ31B Mg alloy substrate. The morphology, composition, and water contact angle (CA) were measured by Fourier transform infrared sp...

  • Feature Paper
  • Article
  • Open Access
671 Views
19 Pages

To meet the requirements for passive heat dissipation and self-cleaning of aluminum alloy enclosures used in 5G base-station active antenna units (AAUs), a scalable surface modification strategy involving sandblasting, NaOH etching, and PFTEOS grafti...

(This article belongs to the Section Metal Surface Process)
  • Article
  • Open Access
10 Citations
2,250 Views
11 Pages

Increasing the transmittance of zinc sulfide (ZnS) infrared windows can effectively improve the imaging quality of infrared detection. In this study, an anti-reflective subwavelength structure (ASS) was manufactured on ZnS using a femtosecond burst B...

(This article belongs to the Section Biomimetic Surfaces and Interfaces)
  • Feature Paper
  • Article
  • Open Access
69 Citations
12,614 Views
13 Pages

The Synthesis of a Superhydrophobic and Thermal Stable Silica Coating via Sol-Gel Process

  • Karmele Vidal,
  • Estíbaliz Gómez,
  • Amaia Martínez Goitandia,
  • Adrián Angulo-Ibáñez and
  • Estíbaliz Aranzabe

28 September 2019

A super-hydrophobic surface at a high temperature (400 °C) using the sol-gel method with tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) as precursors has been obtained. The effects of the coatings’ ages, deposited times and thick...

(This article belongs to the Special Issue Surfaces and Interfaces for Renewable Energy)
  • Article
  • Open Access
9 Citations
2,380 Views
18 Pages

23 November 2024

Herein, composite films were produced by incorporating different amounts (1, 3, 5, and 7%) of barium titanate nanoparticles into the thermoplastic polyurethane matrix using a solution casting method. This study examined the impact of the presence and...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
14 Citations
3,595 Views
21 Pages

Preparation and Performance of H-PDMS/PMHS/OTS Hybrid Nanosilica Hydrophobic and Self-Cleaning Coatings on Phosphogypsum Surface

  • Guang Yang,
  • Zhonghua Chen,
  • Changwei Lv,
  • Lei Deng and ,
  • Xiaofeng Luo,
  • Yi Li,
  • Songtao He and
  • Qibin Liu
  • + 3 authors+ 0 author

28 August 2023

Hemihydrate phosphogypsum, an industrial solid waste product of phosphoric acid production, is abundant and inexpensive. If the problem of poor water resistance is solved, this material could be substituted for cement and other traditional energy-con...

(This article belongs to the Special Issue Patterns or Interfaces in Polymers and Polymeric Nanocomposites for Applications)
  • Article
  • Open Access
13 Citations
8,132 Views
15 Pages

22 February 2016

This paper investigates the use of atmospheric pressure plasma (APP) treatment for improving the surface hydrophobicity of rayon flock synthetic leather with organosilane precursor (tetramethylsilane (TMS)). Plasma deposition of TMS is regarded as an...

  • Article
  • Open Access
41 Citations
7,948 Views
28 Pages

12 April 2024

Laser surface texturing has attracted growing interest, particularly in functional surface modification. Lasers with nanosecond pulse widths and infrared wavelengths are commonly used for metallic surface texturing because of their low cost and poten...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
11 Citations
10,572 Views
10 Pages

Photo-Induced Vertical Alignment of Liquid Crystals via In Situ Polymerization Initiated by Polyimide Containing Benzophenone

  • Fei Wang,
  • Leishan Shao,
  • Qiyao Bai,
  • Xinyuan Che and ,
  • Bin Liu and
  • Yinghan Wang
  • + 1 author+ 0 author

18 June 2017

Vertical alignment of liquid crystal (LC) was achieved in an easy and effective way: in situ photopolymerization of dodecyl acrylate (DA) monomers initiated by polyimide based on 3,3′,4,4′-benzophenonetetracarboxylic dianhydride and 3,3′-dimethyl-4,4...

(This article belongs to the Special Issue Photo-Responsive Polymers)
  • Article
  • Open Access
19 Citations
3,534 Views
11 Pages

18 September 2021

In this study, the compressive strength and water contact angle of mortar specimens prepared by mixing two types of water repellent with ordinary Portland cement (OPC) and rapid-hardening cement mortar were measured before and after surface abrasion....

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
4 Citations
2,610 Views
14 Pages

Development of a Carbon Nanotube-Enhanced FAS Bilayer Amphiphobic Coating for Biological Fluids

  • Sumona Paul,
  • Lingfen Rao,
  • Louis H. Stein,
  • Arash Salemi and
  • Somenath Mitra

14 December 2023

This study reports the development of a novel amphiphobic coating. The coating is a bilayer arrangement, where carbon nanotubes (CNTs) form the underlayer and fluorinated alkyl-silane (FAS) forms the overlayer, resulting in the development of highly...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Article
  • Open Access
27 Citations
7,718 Views
11 Pages

A Novel Approach to Increase the Oxygen Permeability of Soft Contact Lenses by Incorporating Silica Sol

  • Nguyen-Phuong-Dung Tran,
  • Chuan-Cheng Ting,
  • Chien-Hong Lin and
  • Ming-Chien Yang

14 September 2020

This study presents a novel approach to increase the oxygen permeability of hydrogel by the addition of silica sol. Herein, 2-hydroxyethyl methacrylate (HEMA) was copolymerized with N-vinyl-2-pyrrolidone (NVP) after mixing with silica sol. The result...

(This article belongs to the Special Issue Advanced Polymer Nanocomposites II)
  • Article
  • Open Access
73 Citations
12,001 Views
10 Pages

Characteristics of PVDF Membranes Irradiated by Electron Beam

  • Babak Jaleh,
  • Negin Gavary,
  • Parisa Fakhri,
  • Nakatan Muensit and
  • Soheil Mohammad Taheri

5 January 2015

Polyvinylidene fluoride (PVDF) membranes were exposed vertically to a high energy electron beam (EB) in air, at room temperature. The chemical changes were examined by Fourier Transform Infrared Spectroscopy (FTIR). The surface morphologies were stud...

(This article belongs to the Section Membrane Analysis and Characterization)
  • Article
  • Open Access
4 Citations
3,579 Views
11 Pages

Design of Semiconductor Contact Grating Terahertz Source with Enhanced Diffraction Efficiency

  • Zoltán Tibai,
  • Nelson M. Mbithi,
  • Gábor Almási,
  • József A. Fülöp and
  • János Hebling

21 August 2022

We report a semiconductor contact grating terahertz source design based on a rectangular profile for phase-matched terahertz generation in the long infrared pump wavelength range. The calculations show that the best diffraction efficiency can be achi...

  • Communication
  • Open Access
32 Citations
5,316 Views
8 Pages

19 August 2020

In this work, a series of comparative studies for the effect of the nine commercially available cationic, amphoteric and nonionic surfactants on the structure and wettability of the montmorillonite based organoclays were performed. The pristine and m...

(This article belongs to the Section Crystallography and Physical Chemistry of Minerals & Nanominerals)
  • Article
  • Open Access
8 Citations
3,156 Views
15 Pages

15 December 2023

In this study, GX2 was applied as a new high-efficiency chalcopyrite depressant to selectively separate molybdenite from Cu-Mo sulfide ores. The flotation performance and its interaction mechanisms with chalcopyrite and molybdenite were investigated...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
60 Citations
8,554 Views
18 Pages

14 October 2016

Lignocellulose nanofibrils (LCN) and cellulose nanofibrils (CNF) are popular nanometer additives to improve mechanical properties and hydrophilic abilities; moreover, lignocellulose has potential as a natural adhesion promoter in fiber-reinforced com...

  • Article
  • Open Access
31 Citations
6,740 Views
16 Pages

Ecofriendly Preparation and Characterization of a Cassava Starch/Polybutylene Adipate Terephthalate Film

  • Tan Yi,
  • Minghui Qi,
  • Qi Mo,
  • Lijie Huang and ,
  • Hanyu Zhao,
  • Di Liu,
  • Hao Xu,
  • Chongxing Huang,
  • Shuangfei Wang and
  • Yang Liu
  • + 5 authors+ 0 author

11 March 2020

Composite films of polybutylene adipate terephthalate (PBAT) were prepared by adding thermoplastic starch (TPS) (TPS/PBAT) and nano-zinc oxide (nano-ZnO) (TPS/PBAT/nano-ZnO). The changes of surface morphology, thermal properties, crystal types and fu...

(This article belongs to the Special Issue Synthesis and Applications of Eco-Friendly Polymers)
  • Article
  • Open Access
17 Citations
8,367 Views
13 Pages

21 November 2019

In this study water-soluble polyurethane (WSPU) was synthesized from isophorone diisocyanate (IPDI), and polyethylene glycol (PEG), 2-bis(hydroxymethyl) propionic acid or dimethylolpropionic acid (DMPA), butane-1,4-diol (BD), and triethylamine (TEA)...

(This article belongs to the Special Issue Advances in Functional Polyurethanes)
  • Article
  • Open Access
5 Citations
2,609 Views
14 Pages

Combined Treatment (Alkali + Thermal) of Calotropis procera Fiber for Removal of Petroleum Hydrocarbons in Cases of Oil Spill

  • Raoni Batista dos Anjos,
  • Larissa Sobral Hilário,
  • Aécia Seleide Dantas dos Anjos,
  • Emily Cintia Tossi de Araújo Costa and ,
  • Tarcila Maria Pinheiro Frota,
  • Amanda Duarte Gondim and
  • Djalma Ribeiro da Silva
  • + 2 authors+ 0 author

26 September 2021

The objective of this study was to evaluate the Calotropis procera fiber treated with NaOH combined with heat treatment as sorbent material for removal of petroleum and derivatives in cases of oil spill. The effects of oil viscosity, fiber/oil contac...

(This article belongs to the Special Issue Polymers and Fibers)
  • Article
  • Open Access
35 Citations
6,513 Views
14 Pages

16 March 2017

The flotation and adsorption of a new polysaccharide konjac gum (KG) on pyrite and talc in the presence of pre-adsorbed potassium butyl xanthate (PBX) is investigated. The micro-flotation results show that KG is a quality depressant for talc and that...

  • Article
  • Open Access
8 Citations
4,131 Views
17 Pages

20 July 2020

Cement-based materials are non-uniform porous materials that are easily permeated by harmful substances, thereby deteriorating their structural durability. In this work, three ionic paraffin emulsions (IPEs) (i.e., anionic paraffin emulsion (APE), ca...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
33 Citations
5,667 Views
14 Pages

Calcium Carbonate@silica Composite with Superhydrophobic Properties

  • Yitong Ma,
  • Pei Tian,
  • Malayphone Bounmyxay,
  • Yiwen Zeng and
  • Nong Wang

26 November 2021

In this paper, spherical calcium carbonate particles were prepared by using CaCl2 aqueous solution + NH3·H2O + polyoxyethylene octyl phenol ether-10 (OP-10) + n-butyl alcohol + cyclohexane inverse micro emulsion system. Then, nanoscale spheric...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
7 Citations
3,289 Views
13 Pages

12 May 2022

The flotation separation of magnetite and quartz is a long-term challenge for the beneficiation industry. For high-quartz magnetite, conventional flotation shows poor separation effect, resulting in the waste of resources and low flotation efficiency...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
54 Citations
6,431 Views
12 Pages

Enhancing the Performance of PVDF/GO Ultrafiltration Membrane via Improving the Dispersion of GO with Homogeniser

  • Xin Sun,
  • Hana Shiraz,
  • Riccardo Wong,
  • Jingtong Zhang and ,
  • Jinxin Liu,
  • Jun Lu and
  • Na Meng
  • + 2 authors+ 0 author

15 December 2022

In this study, PVDF/GO-h composite membranes were synthesised using a homogeniser to improve the dispersion of GO nanosheets within the composite membrane’s structure, and then characterised and contrasted to PVDF/GO-s control samples, which we...

(This article belongs to the Special Issue Advanced Membrane Technologies for Wastewater Treatment and Recycling)
  • Article
  • Open Access
5 Citations
2,167 Views
13 Pages

7 June 2024

The synergistic effect of sodium dodecyl benzene sulfonate (SDBS) on the flotation separation of magnesite and dolomite using sodium oleate (NaOL) as a collector has been studied through flotation experiments, zeta potential measurements, contact ang...

(This article belongs to the Special Issue Chemical Engineering and Technology in Mineral Processing and Extractive Metallurgy, Volume II)
  • Article
  • Open Access
18 Citations
3,185 Views
11 Pages

Enhancing Starch Film Properties Using Bacterial Nanocellulose-Stabilized Pickering Emulsions

  • Natália Tavares de Almeida,
  • André Luís Sousa Pereira,
  • Matheus de Oliveira Barros,
  • Adriano Lincoln Albuquerque Mattos and
  • Morsyleide de Freitas Rosa

29 November 2024

This study aimed to address issues related to hydrophilicity, barrier properties, and mechanical performance in starch-based films by incorporating Pickering emulsions stabilized with nano-fibrillated bacterial cellulose (BC). Emulsions were added to...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
16 Citations
8,457 Views
9 Pages

Surface Modification of Sol-Gel Silica Antireflective Coatings by F-PMHS: A Simple Method for Improvement of Amphiphobicity

  • Wensheng Lin,
  • Yingying Sun,
  • Jiaxian Zheng,
  • Yanmei Zheng and ,
  • Lianghong Yan,
  • Bo Jiang,
  • Wenbin Yang,
  • Hanxian Chen and
  • Xinxiang Zhang
  • + 4 authors+ 0 author

5 February 2018

Sol-gel silica antireflective coatings (ARCs) with improved amphiphobicity were simply fabricated on BK7 glass substrates via fluorinated-poly(methylhydrogen)siloxane (F-PMHS) surface modification by the dip-coating method. The results of Fourier Tra...

(This article belongs to the Special Issue Applications of Optical Thin Film Coatings)
  • Article
  • Open Access
7 Citations
5,122 Views
10 Pages

13 July 2016

A single electrodeposited film of 6-(3-triethoxysilylpropyl)amino-1,3,5-triazine-2,4-dithiol monosodium (TES) on a copper alloy surface was prepared by the galvanostatic method, then octyl-triethoxysilane (OTES) or hexadecyl-trimethoxysilane (HDTMS)...

  • Article
  • Open Access
15 Citations
8,396 Views
14 Pages

Blocking and Deblocking of Diisocyanate to Synthesize Polyurethanes

  • Sourita Jana,
  • Debasis Samanta,
  • Mir Muhammad Fahad,
  • Sellamuthu N. Jaisankar and
  • Hongdoo Kim

27 August 2021

Diisocyanates, particularly toluene diisocyanate (TDI), are useful for the preparation of various polyurethanes with specific applications as leather-like materials, adhesives and insoles, etc. Blocking agents can be used for the operational simplici...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
3 Citations
2,427 Views
12 Pages

25 August 2023

Hydrophobic melamine sponges were prepared via a facile one-step reaction of three isocyanates (i.e., cyclohexyl isocyanate, octadecyl isocyanate, and butyl isocyanate) with hydroxymethyl groups located on the melamine sponge. The modified sponges we...

  • Article
  • Open Access
24 Citations
5,674 Views
10 Pages

Preparation and Characterization of Novel Polyvinylidene Fluoride/2-Aminobenzothiazole Modified Ultrafiltration Membrane for the Removal of Cr(VI) in Wastewater

  • Xiuju Wang,
  • Kaili Zhou,
  • Zhun Ma,
  • Xingjie Lu and ,
  • Liguo Wang,
  • Zhongpeng Wang and
  • Xueli Gao
  • + 2 authors+ 0 author

25 December 2017

Hexavalent chromium is one of the main heavy metal pollutants. As the environmental legislation becomes increasingly strict, seeking new technology to treat wastewater containing hexavalent chromium is becoming more and more important. In this resear...

(This article belongs to the Special Issue Polymeric Membranes)
  • Feature Paper
  • Article
  • Open Access
26 Citations
9,922 Views
14 Pages

5 July 2016

Waterborne polyurethane (PU) based on poly(ε-caprolactone) (PCL) diol and an amphiphilic polylactide-poly(ethylene glycol) (PLA-PEG) diblock copolymer was synthesized. The molar ratio of PCL/PLA-PEG was 9:1 with different PLA chain lengths. The PU na...

(This article belongs to the Special Issue Biodegradable Polymers)
  • Article
  • Open Access
5 Citations
2,580 Views
18 Pages

17 August 2025

In this study, multifunctional nanocomposite membranes were fabricated using biopolymeric polylactic acid (PLA) and cellulose acetate (CA) composites via electrospinning. The hydrophobic nanocomposite membranes were reinforced with varying concentrat...

(This article belongs to the Special Issue Silicon-Based Polymers: From Synthesis to Applications)
  • Article
  • Open Access
48 Citations
8,994 Views
17 Pages

Surface Treatment of Bacterial Cellulose in Mild, Eco-Friendly Conditions

  • Adriana Nicoleta Frone,
  • Denis Mihaela Panaitescu,
  • Ioana Chiulan,
  • Cristian Andi Nicolae and ,
  • Angela Casarica,
  • Augusta Raluca Gabor,
  • Roxana Trusca,
  • Celina Maria Damian,
  • Violeta Purcar and
  • Paul Octavian Stanescu
  • + 6 authors+ 1 author

Bacterial cellulose (BC) with increased hydrophobicity is required for several applications including packaging. Surface functionalization of BC may provide good resistance to moisture, increased barrier properties or improved compatibility to polyme...

(This article belongs to the Special Issue Surface Modification of Cellulose Fibres)

of 23