Prosthetic joint infection is an uncommon entity, but it supposes high costs, both from the economic side to the health systems and from the emotional side of the patient. The evaluation of the bacterial adherence to different materials frequently in...
Boron carbide (B4C)-reinforced metal matrix composites (MMCs) are promising candidates for biomedical implants due to their mechanical properties and potential biological compatibility. In this study, in vitro biocompatibility and cytotoxicity of B4C...
Orthopedic implants first started out as an all-metal hip joint replacement. However, poor design and machinability as well as unsatisfactory surface finish subjected the all-metal joint replacement to being superseded by a polyethylene bearing. Cont...
Metal Binder Jetting (BJT/M) has emerged as a promising additive manufacturing (AM) technology for the realization of complex parts using a wide range of metal alloys. This technology offers several advantages, such as design flexibility, reduced lea...
The present study evaluates the effect of boron additions on the tribological performance of CoCrMo alloys. The alloys were prepared with boron ranging from 0.06 to 1 wt%. The materials were characterized using metallographic techniques, scanning ele...
End-stage temporomandibular joint (TMJ) disorders often necessitate total joint replacement, and the selection of biomaterial directly impacts long-term outcomes. Ti6Al4V and CoCrMo are commonly used alloys, yet their biomechanical performance in pat...
In the current work, the possibility of the recycling of technogenic CoCrMo material by electron beam melting is investigated. The influence of thermodynamic and kinetic parameters (temperature and melting time) on the behavior of the main components...
This study investigates the effect of boron carbide (B4C) ceramic reinforcement on the microstructural, mechanical, electrical, and electrochemical properties of CoCrMo, Ti, and 17-4 PH alloys produced via powder metallurgy for potential biomedical a...
While titanium nitride (TiN) coatings are well known for their biocompatibility and excellent mechanical properties, their wear particle and debris release in orthopedic implants remains a matter of active investigation. This study addresses the effi...
CoCrMo alloy has long been used as a pairing femoral head material for articular joint implant applications because of its biocompatibility and reliable tribological performance. However, friction and wear issues are still present for CoCrMo (metal)/...
The hardness of heat (thermally) treated CoCrMo ingots, recycled by electron beam melting and refining (EBMR) of a technogenic CoCrMo material (waste from the dental technology) under different process conditions (temperature and residence time) is e...
Cobalt-base alloys (Co-Cr-Mo) are widely employed in dentistry and orthopedic implants due to their biocompatibility, high mechanical strength and wear resistance. The osseointegration of implants can be improved by surface modification techniques. H...
Carbon nanotubes are a promising material for use in innovative biomedical solutions due to their unique chemical, mechanical, electrical, and magnetic properties. This work provides a method for the development of ultrasonically assisted electrophor...
We studied the precipitates that were induced during γ-ε phase transformation in biomedical Co-28Cr-6Mo (mass%) alloys that were fabricated by electron beam melting with carbon contents of 0.184 and 0.018 mass%. In the high-C as-built alloy, M23X6-ty...
The investment casting process, also known as lost-wax casting, is widely used for producing ferrous and non-ferrous metal parts due to its excellent surface finish and dimensional accuracy. In recent years, the use of Co-Cr-Mo alloy has increased du...
Co-Cr-Mo alloy as a human body implant material has a long history, because of its excellent corrosion resistance and biocompatibility, and is widely used in human hip joint materials. Co-Cr-Mo alloy in the human body is often in a passivation state;...
Surface modifications not only improve the corrosion resistance of Co-Cr-Mo dental alloys (Bego Wirobond® C) but also ensure their long-term performance and reliability in dental applications. This paper describes the preparation of single-layer...
In this study, we address the challenge of surface roughness in CoCrMo alloys, typically used in artificial knee joints, which can initiate a cascade of biological responses causing inflammation, osteolysis, joint instability, and increased susceptib...
Dental alloys for direct metal laser sintering (DMLS) are available on the market today, but there is little scientific evidence reported on their characteristics. One of them is the release of ions, as an indicator of the corrosion characteristics o...
The CoCrMo alloys are progressively utilized as biomaterials. This research is dedicated to studying the consequence of (1, 3, and 5) wt% nano-TiO2 addition on the porosity, microstructure, microhardness, and wear behavior of pre-alloyed CoCrMo powde...
This study describes the performance of nanoscale multilayer TiN/NbN coatings deposited on CoCrMo medical-grade alloys by utilising novel mixed high power impulse magnetron sputtering (HIPIMS) and direct current unbalanced magnetron sputtering (UBM)...
The present study was undertaken to investigate the effect of continuous and discontinuous (cyclic) solution heat treatment on the athermal and isothermal ε martensite phase transformation in Co-28Cr-6Mo-0.3C implant alloy. The results showed...
The article analyzes the microstructure evolution of Co-Cr-Mo alloy during isothermal forging. The process of isothermal forging can be a technological solution to produce a semi-finished product for subsequent deformation processing and obtain a hig...
In this study, we aimed to determine the effect of long-term exposure to artificial urine on the physical properties of CoCrMo alloy with biodegradable heparin-releasing polymeric coatings. Variants of polymer coatings of poly(L,L-lactide-ɛ-caprolact...
The Co-Cr-Mo alloy is a biomaterial with very good corrosion resistance and wear resistance; thus, it is widely applied for knee replacements. The wear resistance is influenced by the amount of hcp phase and morphology of carbidic precipitates, which...
Most of the reported work on the effect of applied potential on tribocorrosion or corrosive wear of metallic alloys in a corrosive environment were conducted at anodic potentials. Limited tests have been conducted at cathodic potentials for compariso...
In this paper, we present the mechanisms of premature fracture of modular neck stems in two case studies: (I) when the neck and stem are both made of the same Ti6Al4V alloy, and (II) when the neck and stem are made from two different alloys, CoCrMo a...
This study explores the use of machine learning to predict high-cycle fatigue (HCF) behavior and fatigue crack growth rate (FCGR) in Co-Cr-Mo alloys manufactured through laser powder bed fusion. Two machine learning (ML) models: extreme gradient boos...
Wirobond® C is a commercial dental casting alloy suitable for the fabrication of crowns, bridges, and metal ceramic restorations. This study aims to investigate the effect of ready-to-use Listerine® and Meridol® mouthwashes and sodium flu...
To minimize the stress shielding effect of metallic biomaterials in mimicking bone, the body-centered cubic (bcc) unit cell-based porous CoCrMo alloys with different, designed volume porosities of 20, 40, 60, and 80% were produced via a selective las...
Tribocorrosion damage is a cause for the premature failure of hip implants made of cobalt-based alloys. Low-temperature carburising can be a plausible solution towards mitigating the tribocorrosion damage of articulating components. This diffusion tr...
This paper sought to determine corrosion resistance changes in the artificial saliva of a CoCrMoW-based alloy used for dental prostheses under Nd:YAG laser welding with CoCr alloy and stainless steel wire filler metals. The paper presents the corrosi...
Due to the rapid melting and solidification mechanisms involved in selective laser melting (SLM), CoCrMo alloys fabricated by SLM differ from the cast form of the same alloy. In this study, the relationship between process parameters and the morpholo...
Although post-heat treatment can improve the fatigue life of selective laser melting (SLM)-fabricated cobalt chromium molybdenum (CoCrMo) alloys, the effect of cooling conditions on the fatigue properties of such alloys remains unclear. In this study...
In this work, the technique of Direct Laser Interference Patterning (DLIP) was used to fabricate micrometric structures at the surface of Cobalt-Chromium-Molybdenum and AZ91D magnesium alloys. Line-like patterns with spatial periods of 5 μm were t...
This study investigates the sliding wear resistance of the Co-28Cr-6Mo alloy manufactured by laser-based powder bed fusion through linear reciprocating sliding wear tests. Varied loads and sliding speeds, in both dry and lubricated contact scenarios,...
Co-Cr alloys have good mechanical properties such as high hardness, excellent magnetic properties and good corrosion resistance. For this reason, they are most commonly used as dental and orthopaedic implants. Generally, cast Co-Cr-Mo alloys and forg...
It is well established that the total protein concentration and albumin-to-globulin ratio influence the wear of ultra-high molecular polyethylene (UHMWPE, “polyethylene”) in joint prostheses. A factor on wear not yet studied, but of possible clinical...
CoCrFeNiSiMoW medium-entropy alloy coatings (MEACs) were fabricated by plasma-arc surfacing welding on Q235 steel. The microstructures and mechanical properties of CoCrFeNiSiMoW MEACs were studied. CoCrFeNiSiMoW MEACs are made from a mixture of NiCrC...
The plastic deformation behavior and mechanisms of Co-Cr-Ni-Mo alloy were investigated. The wires were subjected to different reductions using a multi-pass drawing approach and the resulting microstructures were characterized by EBSD and TEM. It was...
Fe-Co-Cr-Mo-W-V-C alloy is one of the most important materials for manufacturing drills, dies, and other cutting tools owing to its excellent hardness. However, it is prone to cracking due to its poor hot ductility during continuous hot working proce...
In this study, we systematically examined the influence mechanisms of introduced cobalt coated alumina (Co-coated Al2O3) particles on the microstructure and properties of cobalt-chromium-molybdenum (CoCrMo) alloy printed by Laser Powder Bed Fusion (L...
The present study examined the interactions between the structure, microstructure and mechanical properties of CrMnFeCoNi, CrMnFeCoNiV0.5 and CrMnFeCoNiMo0.5 High-Entropy Alloys (HEAs). Starting from elemental powders, the HEAs were obtained by high-...
This work studies the fabrication of CoCrFeNiMo high-entropy alloy (HEA) coatings via coaxial powder-fed laser cladding, addressing porosity and impurity issues in conventional methods. The HEA coatings exhibited eutectic/hypereutectic microstructure...
CoCrMo alloys have been used in hip replacements for many years, and their properties can be enhanced with hard coatings. The TiN layer can be deposited on a CoCrMo alloy to its improve corrosion properties, such as reduction of the release of potent...
The present work is aimed at refining the grain size in the Co–28Cr–5Mo–0.3C (wt%) cast alloy using particle-stimulated nucleation (PSN) of recrystallization. It is pointed out that PSN resulted in considerable grain refinement (&as...
High-speed laser cladding was introduced to prepare a CoCrFeNiMo high-entropy alloy (HEA) coating. The microstructure, composition distribution, micromechanical properties, and corrosion resistance of the CoCrFeNiMo coating were characterized. As a r...
Certain amounts of precipitate in CoCrFeNiMox (simplified as Mox) is beneficial to the wear resistance; however, the optimal chemical content of Mo and the anti-wear mechanism behind it remains unclear. The Mox (x = 0, 0.3, 0.5, 1, 1.5 in molar ratio...
CoCrMo-based alloy wires manufactured by powder metallurgy and casting processes for wear-resistant coatings of aerospace turbine blades are taken as the research objects in this study, and TIG hardfacing experiments are carried out. Microstructure c...
Although Direct Metal Laser Melting (DMLM), a powder bed fusion (PBF) Additive Manufacturing (AM) for metallic materials, provides many advantages over conventional manufacturing such as almost unlimited design freedom, one of its main limitations is...
of 7