Skip to Content
You are currently on the new version of our website. Access the old version .

Coatings, Volume 13, Issue 5

2023 May - 163 articles

Cover Story: Amorphous carbon coatings have attracted the community's attention due to their exciting properties: high hardness, good wear resistance, low friction coefficient, transparency, wide band gap, chemical inertness, and biocompatibility. The need to produce a-C films on an industrial scale has prompted efforts to use magnetron sputtering techniques. The fabrication of a-C layers with enhanced sp3 bonds requires the use of special techniques. One such unique technique is Gas Injection Magnetron Sputtering. In this technique, the synthesis of a-C layers is controlled by small gas impulses. It has the extraordinary advantage of limiting the dissipation of the kinetic energy of the plasma species excited at a lower pressure than in standard magnetron sputtering. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (163)

  • Article
  • Open Access
10 Citations
2,801 Views
13 Pages

Complex Bioactive Chitosan–Bioglass Coatings on a New Advanced TiTaZrAg Medium–High-Entropy Alloy

  • Andrei Bogdan Stoian,
  • Radu Nartita,
  • Georgeta Totea,
  • Daniela Ionita and
  • Cristian Burnei

High-entropy alloys (HEAs), also known as multicomponent or multi-principal element alloys (MPEAs), differ from traditional alloys, which are usually based only on one principal element, in that they are usually fabricated from five or more elements...

(This article belongs to the Special Issue New Strategies and Recent Advances in Investigations of Micro- and Nano-Coatings for Technological and Biomedical Applications)
  • Article
  • Open Access
13 Citations
3,562 Views
10 Pages

The structural properties and whiteness of the substrate surface markedly effect printing quality and are closely related to the primer coating processes. Herein, four different roller coating schemes were applied on MDF surfaces to change their stru...

  • Article
  • Open Access
8 Citations
2,720 Views
11 Pages

Effect of HfO2 Particles on Ceramic Coating Fabricated on Ti6Al4V Alloy via Plasma Electrolytic Oxidation

  • Manxi Sun,
  • Meiling Jiang,
  • Hongjian Huang,
  • Biao Yang and ,
  • Yuhang Lin and
  • Ping Wang
  • + 1 author+ 0 author

Hafnium dioxide (HfO2) has a wide bandgap and high dielectric constant. We prepared ceramic coatings on Ti6Al4V alloys via plasma electrolytic oxidation (PEO) in an electrolyte with HfO2 particles. The influence of the HfO2 particles on the microstru...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Feature Paper
  • Article
  • Open Access
4 Citations
2,680 Views
18 Pages

Hybrid structures based on graphene and carbon nanotubes (CNTs) are one of the most relevant modern nanomaterials for applications in various fields, including electronics. The variety of topological architectures of graphene/CNT hybrids requires a p...

(This article belongs to the Special Issue Synthesis, Characterization and Performance Enhancement of Electrode and Biomaterial Coatings)
  • Feature Paper
  • Article
  • Open Access
1 Citations
2,579 Views
7 Pages

A double catalytic layer scheme is proposed and investigated for the low temperature growth of carbon nanotubes (CNTs) over Co (Cobalt), Al (Aluminum), and Ti (Titanium) catalysts on a silicon substrate. In this work, we demonstrate the growth of CNT...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
2 Citations
3,427 Views
15 Pages

Using Cr-bearing low-alloy steel is an effective preventive measure for marine structures, as it offers superior corrosion resistance when compared to plain carbon steel. However, it remains unclear how quenching and tempering heat treatment, which i...

(This article belongs to the Topic Alloys and Composites Corrosion and Mechanical Properties)
  • Article
  • Open Access
18 Citations
3,028 Views
24 Pages

Influence of Silver-Coated Tool Electrode on Electrochemical Micromachining of Incoloy 825

  • Geethapriyan Thangamani,
  • Muthuramalingam Thangaraj,
  • Palani Iyamperumal Anand,
  • Mani Jayakumar and ,
  • Nikolaos E. Karkalos,
  • Emmanouil L. Papazoglou and
  • Panagiotis Karmiris-Obratański
  • + 2 authors+ 0 author

Incoloy 825 alloy is often used in calorifiers, propeller shafts, and tank vehicles owing to the improved resistance to aqueous corrosion. The electrochemical micromachining process can be utilized to machine such an engineering material owing to hig...

(This article belongs to the Special Issue Characterization and Manufacturing of Nano-Composites and Nano-Composite Coatings)
  • Article
  • Open Access
17 Citations
4,244 Views
18 Pages

Surface metal matrix composites offer an excellent solution for applications where surface properties play a crucial role in components’ performance and durability, such as greater corrosion resistance, better wear resistance, and high formabil...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
2 Citations
2,318 Views
10 Pages

We fabricate a head-mounted display (HMD) providing a gradation VR image generated at the surface by using the excitation of the guided mode in a TiO2-slanted nanograting layer. In the TiO2 layer, the beam is waveguided along the short axis direction...

(This article belongs to the Special Issue Advanced Materials for Electrocatalysis and Energy Storage)
  • Feature Paper
  • Article
  • Open Access
16 Citations
3,938 Views
16 Pages

Atomic Layer Deposition of Chlorine Containing Titanium–Zinc Oxide Nanofilms Using the Supercycle Approach

  • Denis Nazarov,
  • Lada Kozlova,
  • Aida Rudakova,
  • Elena Zemtsova and ,
  • Natalia Yudintceva,
  • Elizaveta Ovcharenko,
  • Alexandra Koroleva,
  • Igor Kasatkin,
  • Ludmila Kraeva and
  • Maxim Maximov
  • + 6 authors+ 1 author

Atomic layer deposition (ALD) is a useful tool for producing ultrathin films and coatings of complex composition with high thickness control for a wide range of applications. In this study, the growth of zinc–titanium oxide nanofilms was invest...

(This article belongs to the Special Issue Advances in Deposition and Surface Modification of Oxide Thin Films and Nanocoatings)
  • Article
  • Open Access
6 Citations
2,708 Views
15 Pages

Tribological Properties of TiN Coating on Cotton Picker Spindle

  • Peng Pan,
  • Jie Gao,
  • Chaorun Si,
  • Qiang Yao and ,
  • Zhanhong Guo and
  • Youqiang Zhang
  • + 1 author+ 0 author

The spindle is the key working part of the horizontal cotton picker, and the wear resistance of its surface directly affects the service life of the spindle. Improving the surface performance of the spindle is fundamental for improving the performanc...

(This article belongs to the Section Tribology)
  • Review
  • Open Access
41 Citations
14,303 Views
65 Pages

Joining Technologies for Aluminium Castings—A Review

  • Dezhi Li,
  • Carl Slater,
  • Huisheng Cai,
  • Xiaonan Hou and ,
  • Yongbing Li and
  • Qudong Wang
  • + 1 author+ 0 author

Aluminium castings have been widely used in many industries, including automotive, aerospace, telecommunication, construction, consumer products, etc., due to their lightweight, good electric and thermal conductivity, and electromagnetic interference...

(This article belongs to the Special Issue Recent Developments in Advanced Manufacturing Technology)
  • Article
  • Open Access
4 Citations
3,681 Views
13 Pages

Effect of Post-Oxidation Treatment on the Performance and Microstructure of Silicon Carbide Ceramic Membrane

  • Liqun Hu,
  • Yue Hu,
  • Jiaying Zhu,
  • Jin Li and ,
  • Pinhua Rao,
  • Jian Guo,
  • Guanghui Li and
  • Jinjie Wang
  • + 3 authors+ 0 author

The post-oxidation treatment (POT) is an important step in the preparation of silicon carbide (SiC) ceramic membranes via recrystallization sintering, which is generally considered to remove any possible free carbon. It is found, however, that increa...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
9 Citations
3,168 Views
13 Pages

Mechanical and Tribological Behaviors of Hot-Pressed SiC/SiCw-Y2O3 Ceramics with Different Y2O3 Contents

  • Shaohua Zhang,
  • Jinfang Wang,
  • Meng Zhang,
  • Longqi Ding and ,
  • Huijun Chan,
  • Xiyu Liu,
  • Fengqing Wu,
  • Zhibiao Tu,
  • Ling Shao and
  • Shichang Chen
  • + 8 authors+ 3 authors

Sintering additives are commonly used to reduce the conditions required for densification in composite ceramics without compromising their performances simultaneously. Herein, SiC/SiCw-Y2O3 composite ceramics with 10 vol.% SiC whiskers (SiCw) and dif...

(This article belongs to the Special Issue Advances of Ceramic and Alloy Coatings)
  • Article
  • Open Access
3 Citations
2,437 Views
21 Pages

Influence of Co-Content on the Optical and Structural Properties of TiOx Thin Films Prepared by Gas Impulse Magnetron Sputtering

  • Patrycja Pokora,
  • Damian Wojcieszak,
  • Piotr Mazur,
  • Małgorzata Kalisz and
  • Malwina Sikora

Nonstoichiometric (Ti,Co)Ox coatings were prepared using gas-impulse magnetron sputtering (GIMS). The properties of coatings with 3 at.%, 19 at.%, 44 at.%, and 60 at.% Co content were compared to those of TiOx and CoOx films. Structural studies with...

(This article belongs to the Special Issue Advances in Thin Film Fabrication by Magnetron Sputtering)
  • Article
  • Open Access
4 Citations
2,451 Views
26 Pages

In this paper, potentiostatic and galvanostatic deposition (electrochemical deposition) processes have been used for the obtained of a new composite polymer: N-methylpyrrole-sodium 1-dodecanesulfonate/poly 2-methylthiophene (PNMPY-1SSD/P2MT) coatings...

(This article belongs to the Special Issue New Developments of Protective Coatings, Organic Polymers, and Surface Analysis)
  • Article
  • Open Access
24 Citations
4,557 Views
15 Pages

Oil–water separation using special wettability materials has received much attention due to its low energy consumption and high separation efficiency. Herein, a fluorine-free superhydrophobic cotton fabric (PDMS/STA-coated cotton fabric) was su...

(This article belongs to the Special Issue Sustainable Coatings for Functional Textile and Packaging Materials)
  • Article
  • Open Access
2 Citations
3,546 Views
13 Pages

Morphology and Composition of the Third Body on the Friction Surface of an Organic Composite Railway Brake Shoe

  • Chunjiang He,
  • Yuan Ji,
  • Dingfeng Pei,
  • Ming Gao and ,
  • Chuanzhi Chen,
  • Jingcun Zhao and
  • Wei Wang
  • + 2 authors+ 0 author

Friction properties are significantly affected by third bodies (films formed on friction surfaces). However, the study of their composition and structure remains incomplete. For this reason, an organic composite railway brake shoe was tested at an in...

(This article belongs to the Special Issue Friction, Wear, Lubrication and Mechanics of Surfaces and Interfaces)
  • Article
  • Open Access
3 Citations
3,920 Views
13 Pages

Fabrication and Characterization of Ti/TiC Composite Layers by an Electron-Beam Surface Modification

  • Stefan Valkov,
  • Daniela Nedeva,
  • Vladimir Dunchev,
  • Fatme Padikova and ,
  • Maria Ormanova,
  • Borislav Stoyanov and
  • Nikolay Nedyalkov
  • + 2 authors+ 0 author

In this study, the possibilities for modification and improvement of the surface structure and properties of titanium substrates by a formation of composite Ti/TiC layers are presented. The layers were fabricated by a two-step electron-beam surface m...

(This article belongs to the Special Issue Surface Modification for Improving the Performance of Engineering Components)
  • Communication
  • Open Access
5 Citations
2,272 Views
10 Pages

High-Frequency Conductivity of Amorphous and Crystalline Sb2Te3 Thin Films

  • Rene Castro,
  • Aleksei Kononov and
  • Nadezhda Anisimova

The results of study of charge transfer processes in thin amorphous and crystalline Sb2Te3 films in a wide range of frequencies and temperatures are presented. The frequency spectra of conductivity were obtained by the dielectric spectroscopy method....

(This article belongs to the Section Thin Films)
  • Article
  • Open Access
13 Citations
3,485 Views
17 Pages

Investigation of the Microstructure and Wear Properties of Conventional Laser Cladding and Ultra-High-Speed Laser Cladding Alloy Coatings for Wheel Materials

  • Qian Xiao,
  • Jinlong Xia,
  • Xueshan Gao,
  • Wenbin Yang and ,
  • Daoyun Chen,
  • Haohao Ding and
  • Yao Wang
  • + 2 authors+ 0 author

In this paper, Fe-based and Co-based alloy powders were chosen to perform laser cladding on wheel materials through conventional laser cladding (CLC) and ultra-high-speed laser cladding (UHSLC) processes, respectively. The microstructures, element di...

  • Communication
  • Open Access
10 Citations
3,291 Views
12 Pages

Effect of Ball-Milled Feedstock Powder on Microstructure and Mechanical Properties of Cu-Ni-Al-Al2O3 Composite Coatings by Cold Spraying

  • Hongjin Liu,
  • Mingkun Fu,
  • Shaozhi Pang,
  • Huaiqing Zhu and ,
  • Chen Zhang,
  • Lijun Ming,
  • Xinyu Liu,
  • Minghui Ding and
  • Yudong Fu
  • + 4 authors+ 0 author

Cu, Ni and Al powders mixed in a certain stoichiometric proportion were ground via ball milling and deposited as coatings using low pressure cold spraying (LPCS) technology. The effect of particle morphology on the powder structure as well as the mic...

(This article belongs to the Special Issue Advanced Cold Spraying Technology)
  • Article
  • Open Access
7 Citations
5,942 Views
9 Pages

NbSe2 Crystals Growth by Bromine Transport

  • Dimitre Dimitrov,
  • Peter Rafailov,
  • Vera Marinova,
  • Ivalina Avramova and ,
  • Daniela Kovacheva,
  • Irnik Dionisiev,
  • Nikolay Minev and
  • Marin Gospodinov
  • + 3 authors+ 0 author

Recently, low-dimensional structures in the form of bulk crystals and nanoflakes have received considerable interest due to their 2D unique functionality and promising applications in electronics, photonics, sensing devices and photovoltaic solar cel...

(This article belongs to the Special Issue Application of Graphene and Two-Dimensional Materials in Thin Films)
  • Article
  • Open Access
6 Citations
3,260 Views
14 Pages

The Influence of Iron Tailings Powder on the Properties on the Performances of Cement Concrete with Machine-Made Sand

  • Lin Wang,
  • Genkun Du,
  • Xinxin He,
  • Zicheng Wei and ,
  • Yubo Xu,
  • Shuai Li and
  • Xuejuan Liu
  • + 2 authors+ 0 author

Iron tailings powder (ITP) is a kind of solid waste, which pollutes the environment, without any treatment. The application of ITP in cement concrete is a good choice. In this study, the influence of ITP on the flowability, compressive strength, chlo...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
15 Citations
3,350 Views
19 Pages

Conjugated poly(3,4-ethylenedioxythiophene) (PEDOT) film was electrochemically synthesized on stainless steel (SS). Redox interactions between the PEDOT film and the SS substrate were examined in 3.5 wt.% NaCl aqueous solution with the aid of electro...

(This article belongs to the Topic Environmental Sensitivity and Safety Assessment of Materials)
  • Article
  • Open Access
2 Citations
3,318 Views
21 Pages

Today, laws protecting the population at the global level aim to minimize the induction risk of allergies to type IV contact dermatitis. In the European population, the prevalence of nickel allergy is at 10%–15% of adult females and 1%–3%...

(This article belongs to the Special Issue Anti-corrosion Coatings of Metals and Alloys—New Perspectives)
  • Article
  • Open Access
13 Citations
4,120 Views
8 Pages

Surface Smoothing by Gas Cluster Ion Beam Using Decreasing Three-Step Energy Treatment

  • Vasiliy Pelenovich,
  • Xiaomei Zeng,
  • Xiangyu Zhang,
  • Dejun Fu and ,
  • Yan Lei,
  • Bing Yang and
  • Alexander Tolstoguzov
  • + 2 authors+ 0 author

A three-step treatment of Si wafers by gas cluster ion beam with decreasing energy was used to improve the performance of surface smoothing. First, a high energy treatment at 15 keV and an ion fluence of 2 × 1016 cm−2 was used to remove i...

(This article belongs to the Special Issue Recent Advances in Surface Functionalisation)
  • Article
  • Open Access
13 Citations
3,477 Views
14 Pages

Salicylic-Zinc Nanocomposites with Enhanced Antibacterial Activity

  • Sang Gu Kang,
  • Kyung Eun Lee,
  • Mahendra Singh and
  • Ramachandran Vinayagam

Numerous infectious diseases and microorganisms with high drug resistance have motivated researchers to develop nanocomposite particles as antimicrobial agents. Herein, we report on nanocomposites of salicylic acid (SA) and 5-sulfosalicylic acid (5-S...

(This article belongs to the Special Issue Biomaterials and Antimicrobial Coatings)
  • Article
  • Open Access
4 Citations
4,312 Views
15 Pages

Key Parameters and Optimal Design of a Split Induction Coil for T-Shaped Pipe Brazing

  • Zhenlin Zhang,
  • Ziheng Yang,
  • Pu Xie,
  • Yue Zhao and ,
  • Jiguo Shan,
  • Yan Liu,
  • Aiping Wu,
  • Sida Ma,
  • Lei Zhang and
  • Hui Chen
  • + 5 authors+ 0 author

The heat exchanger made up of several T-shaped joints is a critical component in energy equipment. A split induction coil was designed for T-shaped aluminum pipe brazing, and the Taguchi method was combined with multi-physical simulation to solve the...

(This article belongs to the Special Issue Properties and Applications of Surfaces/Components Engineered Using Thermal Spray, Welding, and Directed High Energy Beam Technologies)
  • Article
  • Open Access
1,421 Views
8 Pages

By introducing the coke powder into the friction pair, the effects of load and temperature on the lubricity of coke powder at the frictional interface are studied. Before the test, the microcrystalline structures of coke powder at different temperatu...

(This article belongs to the Special Issue Mechanical Properties and Tribological Behavior of Alloy/Coatings)
  • Article
  • Open Access
7 Citations
2,269 Views
9 Pages

Tunable Low-Threshold Optical Bistability in Optical Tamm Plasmon Superlattices

  • Fengyu Li,
  • Jiao Xu,
  • Wei Li,
  • Jianbo Li and ,
  • Yuxiang Peng and
  • Mengdong He
  • + 1 author+ 0 author

We propose a scheme to obtain tunable low-threshold optical bistability of reflected beams in optical Tamm plasmon superlattices (TPS). The low-threshold optical bistability is triggered due to the strong third-order non-linearity of graphene and the...

(This article belongs to the Special Issue Optical Properties of Crystals and Thin Films)
  • Article
  • Open Access
13 Citations
2,979 Views
15 Pages

Preparation and Thermophysical Properties of New Multi-Component Entropy-Stabilized Oxide Ceramics for Thermal Barrier Coatings

  • Wenzhe Li,
  • Yongping Zhu,
  • Xueying Wang,
  • Lili Zhao and ,
  • Ying Chu,
  • Fuhua Chen,
  • Chang Ge and
  • Shige Fang
  • + 3 authors+ 0 author

Five kinds of multi-component entropy-stabilized oxide ceramics were prepared by a solid-state reaction method for thermal barrier coatings, namely La0.125Y0.125Yb0.125Gd0.125Zr0.5O1.75 (LaYYbGdZr), Y0.125Yb0.125Gd0.125Ta0.125Zr0.5O1.875 (YYbGdTaZr),...

(This article belongs to the Special Issue Advances in Novel Coatings)
  • Article
  • Open Access
7 Citations
2,755 Views
11 Pages

In this paper, we investigate theoretically the tunable low threshold optical bistability (OB) in the terahertz range based on photonic crystals’ Fabry–Perot (FP) cavity with a three-dimensional Dirac semimetal (3D DSM). On the one hand,...

(This article belongs to the Special Issue Optical Properties of Crystals and Thin Films)
  • Article
  • Open Access
4 Citations
2,485 Views
14 Pages

A Driving Waveform with a Narrow Falling and High-Voltage Reset Structure for Improving the Stability of Electrowetting Displays

  • Zhengxing Long,
  • Zichuan Yi,
  • Jiashuai Wang,
  • Liming Liu and ,
  • Feng Chi,
  • Lingling Shui,
  • Ding Tan and
  • Huan Wang
  • + 3 authors+ 0 author

An electrowetting display (EWD) is a new reflective display device with the advantages of paper display, high reflectivity, and fast response times. However, the display performance of EWDs has been restricted by oil film splitting and luminance osci...

(This article belongs to the Special Issue Application of Coatings and Low-Dimensional Systems in Quantum Devices)
  • Article
  • Open Access
12 Citations
3,162 Views
15 Pages

Application of Magnesium Hydroxide/Diphenoxy Phosphate in Silicone Rubber Flame Retardant Cable Material

  • Wei Wang,
  • Fan Yang,
  • Yunlai Lu,
  • Zhi Luo and ,
  • Fangya Li,
  • You Wu,
  • Jianbing Zhang,
  • Zufeng Xiao,
  • Wei Li and
  • Caiqin Qin
  • + 5 authors+ 0 author

Deketoxime–type room–temperature vulcanized silicone rubber cable materials were prepared using α, ω–dihydroxy polydimethylsiloxane, carbon black, calcium carbonate, magnesium hydroxide, piperazine bis (diphenoxy phospha...

(This article belongs to the Special Issue Organic Synthesis and Characteristics of Thin Films Second Volume)
  • Article
  • Open Access
3 Citations
1,974 Views
13 Pages

Double-Glow Plasma Surface Alloying of BTi-62421S Alloys: Regulation of Microstructure Properties

  • Yangjunfeng Nie,
  • Zhimin Zhang,
  • Mei Cheng,
  • Zhaoming Yan and
  • Beibei Dong

In order to meet the design requirements of lightweight artillery and adopt the method of double-glow plasma nitriding to solve the problem of low hardness and poor abrasion resistance of Ti alloy, the BTi-62421S high-performance titanium (Ti) alloy...

(This article belongs to the Special Issue Fabrication of Plasmonic Thin Films, Their Characterization and Applications)
  • Article
  • Open Access
4 Citations
2,247 Views
12 Pages

Transportation infrastructure relies heavily on asphalt pavement, but conventional bitumen-based mixtures present several drawbacks. This study assesses the potential of poly(methyl methacrylate) resins and thixotropic fillers as substitutes for bitu...

(This article belongs to the Special Issue Asphalt Pavement: Materials, Design and Characterization)
  • Article
  • Open Access
17 Citations
4,658 Views
10 Pages

Highly Improved Dielectric and Thermal Performance of Polyalphaolefin Oil-Based Fluids Using MgO Nanoparticles

  • Nguyen Van Thanh,
  • Nguyen Thi Hong Ngoc,
  • Dang Minh Thuy,
  • Luu Van Tuynh and ,
  • Ha Huu Son and
  • Nguyen Phi Long
  • + 1 author+ 0 author

Polyalphaolefin (PAO) oil is widely used as a dielectric liquid due to its outstanding dielectric strength, high flash point, good oxidation resistance, and stability. The dispersion of MgO nanoparticles in PAO yields nanofluids with many properties...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
12 Citations
4,663 Views
18 Pages

Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel

  • Zipeng Lu,
  • Di Li,
  • Linlin Cao,
  • Hongjian Cui and
  • Jiachuan Xu

Sheet-metal forming is one of the most important manufacturing processes in the automotive industry. This study proposes a multiobjective optimisation scheme that controls both sheet-metal formability and springback. First, the mechanical properties...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
9 Citations
2,922 Views
16 Pages

A Nano-CeO2/Zn–Mn Composite Conversion Coatings on AZ91D Magnesium Alloy Surface of Corrosion Resistance Research

  • Shudi Zhang,
  • Linkun Liu,
  • Quanda Lei,
  • Tao Zhang and ,
  • Jiahui Bing and
  • Jialin Dong
  • + 1 author+ 0 author

The modified nano-CeO2/Zn–Mn phosphate composite coating was deposited on AZ91D magnesium alloy by chemical conversion to enhance its densification and corrosion resistance. The growth mechanism and corrosion resistance of the composite coating...

  • Feature Paper
  • Article
  • Open Access
28 Citations
4,265 Views
13 Pages

Carbon fibre-reinforced polymers (CFRP), thanks to their properties such as lightness, resistance to corrosion and fatigue, are emerging composite materials in the aeronautic fields, guaranteeing to reduce weight and costs by maintaining high perform...

(This article belongs to the Special Issue Laser Surface Engineering)
  • Article
  • Open Access
5 Citations
2,412 Views
11 Pages

In this paper, pure Sb and composite multilayer In2Se3/Sb thin films were prepared on a SiO2/Si substrate. The effects of the addition of In2Se3 interlayers on the physical and electrical properties of phase change thin films were investigated. Compa...

(This article belongs to the Section Thin Films)
  • Communication
  • Open Access
2 Citations
2,788 Views
6 Pages

Protection of Cu from Oxidation by Ta Capping Layer

  • Ivan S. Zhidkov,
  • Andrey I. Kukharenko,
  • Mikhail A. Milyaev,
  • Evgeniy A. Kravtsov and ,
  • Marina V. Makarova,
  • Vladimir V. Gapontsev,
  • Sergey V. Streltsov,
  • Seif O. Cholakh and
  • Ernst Z. Kurmaev
  • + 4 authors+ 0 author

X-ray reflectometry (XRR) and X-ray photoelectron spectroscopy (XPS) measurements (core levels and valence bands) were made of Cu thin films that were prepared and coated by capping Ta layers with different thicknesses (5, 10, 15, 20, and 30 Å)...

(This article belongs to the Section Thin Films)
  • Communication
  • Open Access
9 Citations
2,422 Views
13 Pages

Serious damage caused by oily wastewater makes the development of efficient superhydrophobic and superoleophilic materials for oil/water separation processes critical and urgent. Herein, durable superhydrophobic nanometer-scale TiO2 grains with low-s...

  • Article
  • Open Access
17 Citations
4,156 Views
17 Pages

Plasma-Deposited Organosilicon Hydrophobic Coatings on Cellulosic Materials for Wet Packaging Applications

  • Jacopo Profili,
  • Sara Babaei,
  • Mariam Al Rashidi,
  • Annie Dorris and ,
  • Siavash Asadollahi,
  • Andranik Sarkissian and
  • Luc Stafford
  • + 2 authors+ 0 author

Non-toxic organosilicon coatings with hydrophobic properties were deposited on Kraft paper films using atmospheric-pressure dielectric barrier discharge. In order to assess the applicability of the plasma-deposited coating in the food packaging indus...

(This article belongs to the Special Issue Recent Advances in Functional Biopolymers for Food Packaging and Biomedical Applications)
  • Article
  • Open Access
9 Citations
2,139 Views
13 Pages

Multi-Objective Optimization of Dimensional Accuracy in Electric Hot Incremental Sheet Forming

  • Zhengfang Li,
  • Songlin He,
  • Zhiguo An,
  • Zhengyuan Gao and
  • Shihong Lu

The forming defects of parts mainly include fracture, springback, thermal expansion, and rough surface during electric hot incremental forming, in which the springback and thermal expansion directly affects the dimensional accuracy of parts. In this...

  • Article
  • Open Access
10 Citations
2,447 Views
18 Pages

TiO2 thin films were deposited on ginger lily (Hedychium gardnerianum) fibers using a custom-made DC reactive magnetron sputtering system with Ar/O2 mixture at two O2/(O2 + Ar) ratios (50% O2 and 75% O2) and sputtering powers (500 and 1000 W), and th...

(This article belongs to the Special Issue Advanced Nanostructured Coatings Deposited by Magnetron Sputtering)

of 4

XFacebookLinkedIn
Coatings - ISSN 2079-6412