Skip to Content

349 Results Found

  • Article
  • Open Access
18 Citations
6,212 Views
15 Pages

Laser Remelting Process Simulation and Optimization for Additive Manufacturing of Nickel-Based Super Alloys

  • Fabian Soffel,
  • Yunong Lin,
  • Dominik Keller,
  • Sergei Egorov and
  • Konrad Wegener

27 December 2021

Nickel-based super alloys are popular for applications in the energy and aerospace industries due to their excellent corrosion and high-temperature resistance. Direct metal deposition (DMD) of nickel alloys has reached technology readiness for severa...

(This article belongs to the Topic Structure and Properties Modification in Additive Manufacturing)
  • Article
  • Open Access
15 Citations
4,894 Views
19 Pages

27 January 2024

Owing to the high optical reflectivity of copper powder, the high-performance fabrication of copper alloys in the laser additive manufacturing (AM) field is problematic. To tackle this issue, this study employs the remelting process during laser powd...

(This article belongs to the Special Issue Research on Laser Welding and Laser Additive Manufacturing)
  • Article
  • Open Access
10 Citations
3,430 Views
20 Pages

Droplet Formation and Dripping Behavior during the Electroslag Remelting Process with Two Series-Connected Electrodes

  • Wenjie Tong,
  • Wanming Li,
  • Ximin Zang,
  • Huabing Li and ,
  • Zhouhua Jiang and
  • Yu Han
  • + 1 author+ 0 author

18 March 2020

The formation and dripping behavior of droplets in the process of the electroslag remelting with two series-connected electrodes (TSCE-ESR) has an important influence on the optimization of power supply parameters and the purity of the electroslag in...

  • Article
  • Open Access
4 Citations
6,434 Views
18 Pages

Microstructural and Mechanical Characterization of Ledeburitic AISI D2 Cold-Work Tool Steel in Semisolid Zones via Direct Partial Remelting Process

  • M. N. Mohammed,
  • M. Z. Omar,
  • Adnan Naji Jameel Al-Tamimi,
  • Hakim S. Sultan and ,
  • Luay Hashem Abbud,
  • Salah Al-Zubaidi,
  • Oday I. Abdullah and
  • M. Abdulrazaq
  • + 3 authors+ 0 author

The success of the thixoforming process largely depends on the created microstructure, which must be globular in the liquid phase. The solid–liquid structural changes that occur on as-annealed D2 tool steel when it is subjected to the so-called...

  • Article
  • Open Access
7 Citations
11,480 Views
14 Pages

18 February 2014

A mathematical model of electroslag remelting (ESR) process is established based on its technical features and dynamic characteristics. A new multivariable self-tuning proportional-integral-derivative (PID) controller tuned optimally by an improved p...

  • Article
  • Open Access
3 Citations
2,353 Views
28 Pages

15 September 2022

The article contains an analysis of selected aspects of the structure and properties of laser remelting of low carbon steel supported by acoustic vibrations obtained in the research presented in (A Novel Method of Supporting the Laser Welding Process...

(This article belongs to the Special Issue Nonconventional Technology in Materials Processing-Volume 2)
  • Article
  • Open Access
3 Citations
2,615 Views
11 Pages

22 December 2024

This study evaluates the effects of laser parameters on the surface remelting of the Ti-3Al-2.5V alloy. A ms-laser equipped with a coaxial gas-pressure head integrated into a Swiss-type turning machine is used for the laser remelting process of cylin...

(This article belongs to the Special Issue Laser Micro/Nano Fabrication, Second Edition)
  • Article
  • Open Access
5 Citations
2,727 Views
13 Pages

28 December 2023

In this paper, a mathematical model of an electromagnetic field during an electroslag remelting process of industrial-scale slab was established using a Maxwell 3D module in Ansys Electromagnetics Suite. The distribution characteristics of the magnet...

(This article belongs to the Special Issue Remelting and Casting Processes in the Production of Metals and Alloys)
  • Article
  • Open Access
4 Citations
2,228 Views
17 Pages

13 July 2023

In the process of electroslag remelting (ESR) for large-sized slab ingots, controlling the surface quality of the slab ingot is challenging due to its relatively high width-to-thickness ratio. In this study, a three-dimensional dynamic mathematical m...

(This article belongs to the Special Issue Metallurgical Process: Optimization and Control)
  • Feature Paper
  • Article
  • Open Access
4 Citations
4,607 Views
20 Pages

Laser Cleaning Process for Low-Pressure Turbine Blade Paint Removal with Remelting Suppression

  • Xihuai Wang,
  • Yaochen Ding,
  • Qiujuan Chen,
  • Hongying Li and ,
  • Li Wang and
  • Mingdi Wang
  • + 1 author+ 0 author

8 September 2025

This study aims to develop an efficient laser cleaning process for removing paint coatings from low-pressure turbine blades while suppressing substrate remelting, focusing on elucidating the underlying paint removal mechanisms on coated aluminum allo...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
5 Citations
3,737 Views
9 Pages

27 September 2018

Anomalous eutectic morphologies were observed during laser remelting of a Ni-Sn powder bed, where it was sandwiched between a lamellar eutectic at the bottom of melt pool. That is, the anomalous eutectic growth mechanism can be divided into two proce...

(This article belongs to the Special Issue Multi-scale Modeling of Materials and Structures)
  • Article
  • Open Access
12 Citations
4,453 Views
19 Pages

20 June 2023

In this study, the effects of the laser power (2000 W, 2250 W, 2500 W), scanning speed (0.6, 0.8, 1 m/min), and powder feed rate (10, 12.5, 15 g/min) on material structures and their mechanical properties were investigated in the production of 316L s...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
7 Citations
3,599 Views
14 Pages

Assessment of Porosity Defects in Ingot Using Machine Learning Methods during Electro Slag Remelting Process

  • Ganggang Zhang,
  • Yingbin Hu,
  • Dong Hou,
  • Dongxuan Yang and ,
  • Qingchuan Zhang,
  • Yapeng Hu and
  • Xinliang Liu
  • + 2 authors+ 0 author

2 June 2022

The porosity defects in the ingot, which are caused by moisture absorption in slag during the electroslag remelting process, deserve the researcher’s attention in the summer wet season. The prediction of slag weight gain caused by moisture abso...

(This article belongs to the Special Issue Electromagnetic Preparation of Metallic Materials)
  • Article
  • Open Access
7 Citations
3,207 Views
14 Pages

Wear Resistance Evaluation of Self-Fluxing Nickel-Based Coating Deposited on AISI 4340 Steel by Atmospheric Plasma Spray

  • Francisco C. Monção,
  • Felipe R. Caliari,
  • Filipe E. Freitas,
  • Antônio A. Couto and ,
  • Arnaldo Augusto,
  • Carlos R. C. Lima and
  • Marcos Massi
  • + 2 authors+ 0 author

30 April 2024

Materials with enhanced wear resistance are constantly in high demand. Nickel-based self-fluxing materials deposited by atmospheric plasma spraying (APS) have feasible wear resistance performance. This study aimed to evaluate the results of a nickel-...

(This article belongs to the Special Issue Surface Engineering and Coating Tribology)
  • Article
  • Open Access
25 Citations
6,323 Views
21 Pages

Numerical Investigation of Segregation Evolution during the Vacuum Arc Remelting Process of Ni-Based Superalloy Ingots

  • Jiajun Cui,
  • Baokuan Li,
  • Zhongqiu Liu,
  • Fengsheng Qi and ,
  • Beijiang Zhang and
  • Ji Zhang
  • + 1 author+ 0 author

17 December 2021

Segregation defects greatly affect the service performance and working life of castings during the vacuum arc remelting (VAR) process. However, the corresponding research on the prediction of segregation defects is still not comprehensive. Through co...

(This article belongs to the Special Issue Numerical Modeling of Metallurgical Processes: Continuous Casting and Electroslag Remelting)
  • Article
  • Open Access
7 Citations
2,815 Views
12 Pages

Research on the Melt Pool Shape Formation Mechanism of the Laser Surface Remelting of Nickel-Based Single-Crystal Superalloy

  • Ruining Yang,
  • Wenjin Chen,
  • Linfeng Tang,
  • Jincen Ma and ,
  • Qingrong Zhou,
  • Xiaowei Lei,
  • Wenjing Yao and
  • Nan Wang
  • + 3 authors+ 0 author

26 July 2023

By numerical simulation and experimental analysis, the melt pool shapes for the laser surface remelting of nickel-based single-crystal superalloy under different processing parameters are investigated. The results show that heat conduction and heat c...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
12 Citations
3,339 Views
15 Pages

21 November 2020

The paper presents the study results of laser remelting diffusion boronized layers produced on CT90 tool steel. A diffusion boronized layer was produced at 950 °C in a powder mixture containing boron carbide as a source of boron. A needle-like mi...

  • Article
  • Open Access
19 Citations
5,371 Views
20 Pages

29 May 2018

A transient coupled mathematical model has been proposed to predict the motion and distribution of nonmetallic inclusions in the electroslag remelting process. The electromagnetic field, temperature distribution, flow pattern, solidification, and inc...

  • Article
  • Open Access
10 Citations
2,936 Views
25 Pages

Numerical Simulation on Motion Behavior of Inclusions in the Lab-Scale Electroslag Remelting Process with a Vibrating Electrode

  • Fang Wang,
  • Boyang Sun,
  • Zhongqiu Liu,
  • Baokuan Li and ,
  • Shuo Huang and
  • Beijiang Zhang
  • + 1 author+ 0 author

5 November 2021

In order to meet the requirement of high-quality ingots, the vibrating electrode technique in the electroslag remelting (ESR) process has been proposed. Non-metallic inclusions in ingots may cause serious defects and deteriorate mechanical properties...

(This article belongs to the Special Issue Numerical Modeling of Metallurgical Processes: Continuous Casting and Electroslag Remelting)
  • Article
  • Open Access
13 Citations
3,971 Views
11 Pages

The Formation Mechanism of Oxide Inclusions in a High-Aluminum Ni-Based Superalloy during the Vacuum Induction Remelting Process

  • Lihui Zhang,
  • Erkang Liu,
  • Weijie Xing,
  • Zhaojiang Xue and ,
  • Wenjie Fan,
  • Yunsong Zhao,
  • Yushi Luo,
  • Changchun Ge and
  • Min Xia
  • + 4 authors+ 0 author

30 May 2024

Oxide inclusions in Ni-based superalloys play a crucial role in determining their mechanical properties, oxidation resistance, and corrosion resistance at high temperatures. In this paper, the source and formation mechanism of different types of oxid...

(This article belongs to the Special Issue Solidification and Casting of Metals and Alloys)
  • Review
  • Open Access
28 Citations
7,534 Views
23 Pages

The poor surface roughness associated with additively manufactured parts can influence the surface integrity and geometric tolerances of produced components. In response to this issue, laser polishing (LP) has emerged as a potential technique for imp...

(This article belongs to the Special Issue Smart and Advanced Manufacturing)
  • Article
  • Open Access
6 Citations
4,695 Views
12 Pages

Thermodynamics Analysis and Pilot Study of Reusing Medium and High Alloy Steel Scrap Using Induction Melting and Electroslag Remelting Process

  • Liushun Wu,
  • Kunlong Liu,
  • Haiqing Mei,
  • Guangda Bao and ,
  • Yun Zhou and
  • Haichuan Wang
  • + 1 author+ 0 author

30 May 2022

The annual cumulative quantity of high and medium alloy steel scrap has exceeded 10 million tons. Using the traditional smelting process involving electric arc refining in a smelting furnace for these scraps causes high percentages of alloy losses, w...

(This article belongs to the Special Issue Advances in Refining, Solidification, and Casting of Steels and Alloys)
  • Article
  • Open Access
310 Views
24 Pages

Multiphysics Simulation of Slag-Skin Evolution and Process Parameter Effects During Electroslag Remelting of X2CrNiMo18.12 (Nitrogen-Controlled) Steel

  • Zhengping Lu,
  • Yinxi Ding,
  • Nachuan Ju,
  • Jianneng Zheng and ,
  • Lianlong Li,
  • Bin Qiu,
  • Jie Zeng,
  • Tao Liu and
  • Haomin Wu
  • + 4 authors+ 0 author

1 September 2026

X2CrNiMo18.12 (nitrogen-controlled) stainless steel is prone to slag-shell erosion during electroslag remelting (ESR), which may lead to steel breakout and mold leakage. To investigate the evolution behavior of the slag shell and molten pool, a trans...

(This article belongs to the Special Issue Advances in Electroslag Remelting and Continuous Casting Technology)
  • Article
  • Open Access
943 Views
12 Pages

Optimization of Process Parameters for Laser Remelting Nickel Coating

  • Hengzheng Li,
  • Yangyang Li,
  • Rui Zhan,
  • Ruolan Shen and ,
  • Xiaobo Song and
  • Conghu Liu
  • + 1 author+ 0 author

Nickel coating exhibits excellent wear resistance. To further improve its surface performance, laser remelting technology was employed in this study to modify the surface of nickel coating. In this study, pulsed laser with a wavelength of 1064 nm, pu...

(This article belongs to the Special Issue Laser Micro/Nano Fabrication and Surface Modification Technology)
  • Article
  • Open Access
4 Citations
2,865 Views
21 Pages

LPBF Processability of NiTiHf Alloys: Systematic Modeling and Single-Track Studies

  • Hediyeh Dabbaghi,
  • Mohammad Pourshams,
  • Mohammadreza Nematollahi,
  • Behrang Poorganji and ,
  • Michael M. Kirka,
  • Scott Smith,
  • Chins Chinnasamy and
  • Mohammad Elahinia
  • + 3 authors+ 0 author

22 August 2024

Research into the processability of NiTiHf high-temperature shape memory alloys (HTSMAs) via laser powder bed fusion (LPBF) is limited; nevertheless, these alloys show promise for applications in extreme environments. This study aims to address this...

(This article belongs to the Special Issue State of the Art in Materials for Additive Manufacturing)
  • Article
  • Open Access
12 Citations
3,988 Views
15 Pages

Fe-Mn-Al-Ni Shape Memory Alloy Additively Manufactured via Laser Powder Bed Fusion

  • Ismail Alhamdi,
  • Anwar Algamal,
  • Abdalmageed Almotari,
  • Majed Ali and ,
  • Umesh Gandhi and
  • Ala Qattawi
  • + 1 author+ 0 author

17 October 2023

Fe-Mn-Al-Ni is an Fe-based shape memory alloy (SMA) featuring higher stability and low temperature dependency of superelasticity stress over a wide range of temperatures. Additive manufacturing (AM) is a promising technique for fabricating Fe-SMA wit...

(This article belongs to the Special Issue Microstructure and Properties of Steels and Other Structural Alloys)
  • Article
  • Open Access
10 Citations
4,107 Views
25 Pages

26 February 2023

Control of solidification structure and segregation is crucial to improve the service performance of high carbon martensitic stainless steels. Design of the electroslag remelting (ESR) process based on the essential parameters of melting rate, fillin...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
358 Views
13 Pages

Development and Testing of an Experimental Electroslag Remelting Facility for Processing Radioactive Metal Waste

  • Nurzhan Mukhamedov,
  • Sergey Dolzhikov,
  • Alexander Pakhnits,
  • Artur Surayev and ,
  • Kuanyshbek Toleubekov,
  • Adilet Mukhametzhanov and
  • Vladimir Vityuk
  • + 2 authors+ 0 author

24 September 2026

Modern nuclear energy faces the problem of the accumulation, storage, and management of radioactive waste. For radioactive metal waste (RMW), one of the main tasks is to reduce its volume, carry out partial or complete decontamination, and convert it...

(This article belongs to the Special Issue Advances in Electroslag Remelting and Continuous Casting Technology)
  • Article
  • Open Access
56 Citations
11,677 Views
21 Pages

25 April 2018

The goal of this study was to synthesize, through a facile strategy, high molecular weight poly(ethylene furanoate) (PEF), which could be applicable in food packaging applications. The efficient method to generate PEF with high molecular weight consi...

(This article belongs to the Special Issue Polymers from Renewable Resources)
  • Article
  • Open Access
7 Citations
2,775 Views
10 Pages

13 October 2021

During the process of electroslag remelting (ESR) of steel containing titanium and aluminum, the activity ratio between titania and alumina in CaF2-CaO-MgO-Al2O3-TiO2 slag must be fixed in order to guarantee the titanium and aluminum contents in the...

  • Article
  • Open Access
29 Citations
3,803 Views
13 Pages

Microstructure and Corrosion Resistance of Underwater Laser Cladded Duplex Stainless Steel Coating after Underwater Laser Remelting Processing

  • Congwei Li,
  • Jialei Zhu,
  • Zhihai Cai,
  • Le Mei and ,
  • Xiangdong Jiao,
  • Xian Du and
  • Kai Wang
  • + 2 authors+ 0 author

31 August 2021

Combined with the technologies of underwater local dry laser cladding (ULDLC) and underwater local dry laser remelting (ULDLR), a duplex stainless steel (DSS) coating has been made in an underwater environment. The phase composition, microstructure,...

(This article belongs to the Special Issue Material Design and Defect Control for Metal Additive Manufacturing)
  • Article
  • Open Access
19 Citations
3,420 Views
14 Pages

20 October 2021

A comprehensive transient model is developed to study the effect of electrode rotation on the evolution of metal pool profiles and the solidification quality of ESR ingots. Magnetohydrodynamic flow, heat transfer, solidification, and electrode meltin...

(This article belongs to the Special Issue Numerical Modeling of Metallurgical Processes: Continuous Casting and Electroslag Remelting)
  • Article
  • Open Access
21 Citations
5,682 Views
12 Pages

Process of Pure Copper Fabricated by Selective Laser Melting (SLM) Technology under Moderate Laser Power with Re-Melting Strategy

  • Rong Hu,
  • Kangjing Su,
  • Zibin Lao,
  • Yixun Cai and ,
  • Bin Fu,
  • Matthew M. F. Yuen,
  • Zhaoli Gao,
  • Mingxuan Cao and
  • Ying Wang
  • + 4 authors+ 0 author

27 March 2023

Pure copper (Cu) material, because of its high thermal conductivity, can be 3D printed to fabricate effective thermal management components. However, in the selective laser melting (SLM) process, due to copper’s high optical reflectivity, Cu-ba...

  • Article
  • Open Access
22 Citations
7,102 Views
12 Pages

Effect of Current on Structure and Macrosegregation in Dual Alloy Ingot Processed by Electroslag Remelting

  • Yu Liu,
  • Zhao Zhang,
  • Guangqiang Li,
  • Qiang Wang and ,
  • Li Wang and
  • Baokuan Li
  • + 1 author+ 0 author

24 May 2017

Macrosegregation is a very common problem for the quality control of all cast ingots. The effect of current on the structure and macrosegregation in dual alloy ingot processed by electroslag remelting (ESR) was investigated experimentally with variou...

(This article belongs to the Special Issue Alloy Steels)
  • Article
  • Open Access
10 Citations
3,305 Views
14 Pages

The Influence of Laser Surface Remelting on the Tribological Behavior of the ECAP-Processed AZ61 Mg Alloy and AZ61–Al2O3 Metal Matrix Composite

  • Beáta Ballóková,
  • Ladislav Falat,
  • Viktor Puchý,
  • Zuzana Molčanová and ,
  • Michal Besterci,
  • Róbert Džunda,
  • Aqeel Abbas and
  • Song-Jeng Huang
  • + 3 authors+ 0 author

12 June 2020

This paper deals with the tribological study of the laser remelted surfaces of the ECAP-processed AZ61 magnesium alloy and AZ61–Al2O3 metal matrix composite with 10 wt.% addition of Al2O3 nanoparticles. The study included the experimental optim...

(This article belongs to the Special Issue Friction and Wear of Engineering Materials )
  • Article
  • Open Access
18 Citations
5,411 Views
18 Pages

16 April 2024

Vacuum arc remelting is the main production method of titanium alloy ingots at present. In order to obtain good quality ingots, it is of great significance to study the formation of the solidification structure of ingots via vacuum arc remelting. In...

(This article belongs to the Special Issue Metallurgical Process: Optimization and Control)
  • Article
  • Open Access
9 Citations
6,712 Views
11 Pages

The Structural Evolution and Segregation in a Dual Alloy Ingot Processed by Electroslag Remelting

  • Yu Liu,
  • Zhao Zhang,
  • Guangqiang Li,
  • Qiang Wang and ,
  • Li Wang and
  • Baokuan Li
  • + 1 author+ 0 author

21 December 2016

The structural evolution and segregation in a dual alloy made by electroslag remelting (ESR) was investigated by various analytical techniques. The results show that the macrostructure of the ingot consists of two crystallization structures: one is a...

(This article belongs to the Special Issue Alloy Steels)
  • Article
  • Open Access
883 Views
17 Pages

11 December 2025

In this paper, the moving heat transfer boundary method is adopted to establish a three-dimensional solidification microstructure model based on the coupling technology of the cellular automata method (CA) and finite element method (FE), simulate the...

(This article belongs to the Special Issue Crystallization of High-Performance Metallic Materials (3rd Edition))
  • Article
  • Open Access
10 Citations
4,661 Views
15 Pages

2 July 2018

The recrystallization and partial remelting (RAP) method was applied to obtain the semisolid 7075 aluminum alloy with different liquid fractions. The effects of liquid fraction on the microstructure and tensile properties were determined in detail. T...

  • Article
  • Open Access
3 Citations
1,195 Views
18 Pages

The present study investigated the microstructure, processability, and mechanical strength of an AlSi9Mg-20vol.%SiC composite to assess its processing and mechanical performance during the laser powder bed fusion process. A simple laser surface remel...

  • Article
  • Open Access
8 Citations
3,821 Views
15 Pages

24 December 2019

To study the effect of laser biomimetic treatment on different material compositions, five kinds of steels with different carbon element contents were studied by laser remelting. The characteristics (depth, width), microstructure, hardness, tensile p...

(This article belongs to the Special Issue Advances in Laser Materials Processing)
  • Feature Paper
  • Article
  • Open Access
11 Citations
5,415 Views
22 Pages

Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion

  • Ahmet Alptug Tanrikulu,
  • Aditya Ganesh-Ram,
  • Hamidreza Hekmatjou,
  • Sadman Hafiz Durlov and ,
  • Md Najmus Salehin and
  • Amirhesam Amerinatanzi
  • + 1 author+ 0 author

26 May 2024

Ti-6Al-4V with its eclectic array of excellent properties along with the combination of meticulous precision and flexibility offered by the laser powder bed fusion (LPBF) technology makes it a strong proponent in the field of engineering applications...

(This article belongs to the Special Issue Microstructural Tailoring of Metals and Alloys)
  • Proceeding Paper
  • Open Access
2,777 Views
6 Pages

The production of Al-alloys is mainly based on electrolytic pure Al alloyed with the necessary other elements, which are added in high purity into the melt pool during smelting processes. This fact is responsible for high costs and emissions during a...

(This article belongs to the Proceedings of International Conference on Raw Materials and Circular Economy)
  • Article
  • Open Access
19 Citations
5,263 Views
12 Pages

The Effects of Laser Remelting on the Microstructure and Performance of Bainitic Steel

  • Yuelong Yu,
  • Min Zhang,
  • Yingchun Guan,
  • Peng Wu and ,
  • Xiaoyu Chong,
  • Yuhang Li and
  • Zhunli Tan
  • + 2 authors+ 0 author

20 August 2019

The surface of bainitic steel was remelted by fiber laser, and the microstructure and mechanical properties of the melted layer were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), a nanoindentation instrument,...

  • Article
  • Open Access
6 Citations
2,401 Views
17 Pages

The Influence of Laser Remelting Parameters on the Surface Quality of Copper

  • Hengzheng Li,
  • Yang Chen,
  • Shuai Chen,
  • Yan Liu and
  • Conghu Liu

20 July 2024

In order to improve the surface quality of copper after laser remelting, this article took laser frequency, pulse width, and energy density as the research objects and used scanning electron microscopy (SEM), a laser confocal three-dimensional measur...

(This article belongs to the Special Issue Advanced Additive Manufacturing Techniques: From Fundamental Research to Applications)
  • Article
  • Open Access
7 Citations
2,490 Views
28 Pages

Research on a Low-Cost, Low-Waste Method for Surface Flatness Improvement of WAAM Components Based on Tungsten Inert Gas Arc Remelting (TIGAR)

  • Bo Zhao,
  • Yuanlin Liu,
  • Qingyuan Kang,
  • Junjie Zhao and ,
  • Guangyu Ma and
  • Jie Wang
  • + 1 author+ 0 author

31 December 2024

Wire-arc additive manufacturing (WAAM) has fully empowered the design and manufacturing of metals with its unparalleled efficiency and flexibility. However, the process has relatively poor shape control capabilities, often requiring machining post-pr...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
2,331 Views
16 Pages

Study on Mechanism of Microstructure Refinement by Ultrasonic Cavitation Effect

  • Chang Li,
  • Shuchao Li,
  • Jiabo Liu,
  • Yichang Sun and ,
  • Yuhao Wang and
  • Fanhong Kong
  • + 1 author+ 0 author

17 November 2024

During the solidification process of the alloy, the temperature lies in the range between the solid-phase line and the liquidus. Dendrite growth exhibits high sensitivity to even slight fluctuations in temperature, thereby significantly influencing t...

(This article belongs to the Special Issue Effects of Laser Treatment on Surface Characterization and Mechanical Properties of Alloys, 2nd Edition)
  • Article
  • Open Access
327 Views
13 Pages

9 September 2026

Surface remelting is an effective method for modifying surface microstructures and improving the mechanical properties of metallic materials. However, the influence of an underwater environment on the laser remelting behaviour of zirconium alloys rem...

(This article belongs to the Special Issue Advanced Processing, Welding and Mechanical Performance of Materials)
  • Article
  • Open Access
21 Citations
4,338 Views
13 Pages

25 January 2020

This article aims to evaluate the influence of remelting on the experimental Al-Si-Cu type alloy with higher iron content on mechanical properties in relation to the resulting structure. The remelting or recycling process is one of the means of reduc...

(This article belongs to the Special Issue Applications of Al Alloys on Lightweight Structures)
  • Article
  • Open Access
5 Citations
1,828 Views
23 Pages

Microstructure and Properties of Laser-Remelted Al-Cu-Mn Alloy

  • Jibo Hou,
  • Huiru Li,
  • Qingnan Dong and
  • Zhanyong Zhao

21 June 2025

This article studies the effects of a laser remelting treatment on the microstructure and properties of Al-Cu-Mn alloy surfaces, as well as the effects of a heat treatment process on the microstructure and mechanical properties of the matrix zone and...

(This article belongs to the Special Issue Recent Developments in Laser Additive Manufacturing of Metallic Materials)

of 7