Skip to Content

441 Results Found

  • Technical Note
  • Open Access
5 Citations
3,097 Views
9 Pages

Pressure-Driven Micro-Casting for Electrode Fabrication and Its Applications in Wear Grain Detections

  • E Cheng,
  • Ben Xing,
  • Shanshan Li,
  • Chengzhuang Yu and ,
  • Junwei Li,
  • Chunyang Wei and
  • Cheng Cheng
  • + 2 authors+ 0 author

10 November 2019

The microelectrode is an essential and vital part in microsensors that are largely used in industrial, chemical, and biological applications. To obtain desired microelectrodes in great quality, it is also of great necessity and significance to develo...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Feature Paper
  • Article
  • Open Access
1 Citations
4,936 Views
13 Pages

MEMS-Casting Fabricated Chip-Style 3D Metal Solenoidal Transformers towards Integrated Power Supply

  • Nianying Wang,
  • Changnan Chen,
  • Pu Chen,
  • Jiebin Gu and ,
  • Pichao Pan,
  • Ruofeng Han,
  • Min Liu and
  • Xinxin Li
  • + 3 authors+ 0 author

18 February 2022

A silicon-chip-based 3D metal solenoidal transformer is proposed and developed to achieve AC-DC conversion for integrated power supply applications. With wafer-level micro electromechanical systems (MEMS) fabrication technique to form the metal casti...

(This article belongs to the Section A: Physics)
  • Feature Paper
  • Article
  • Open Access
7 Citations
5,562 Views
15 Pages

31 January 2024

The paper reports on high voltage (HV)-isolated MEMS quad–solenoid transformers for compact isolated gate drivers and bias power supplies. The component is wafer-level fabricated via a novel MEMS micro-casting technique, where the tightly coupl...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
16 Citations
4,989 Views
15 Pages

25 July 2019

In this paper, the micro-structure and solid solubility of 2A97 aluminum-lithium alloy ingots prepared by conventional direct chill (DC) casting and low frequency electromagnetic casting (LFEC) as well as the density of precipitates and tensile prope...

  • Article
  • Open Access
11 Citations
3,925 Views
14 Pages

15 June 2020

The effect of low-frequency electromagnetic fields on the micro-structure and macro-segregation of 5A90 alloy ingots during the semi-continuous casting process were quantitatively investigated. The ingots of a 5A90 alloy with a diameter 170 mm were p...

  • Article
  • Open Access
7 Citations
4,526 Views
13 Pages

Study of a Late Bronze Age Casting Mould and Its Black Residue by 3D Imaging, pXRF, SEM-EDS, Micro-FTIR and Micro-Raman

  • Elin Figueiredo,
  • Carlo Bottaini,
  • Catarina Miguel,
  • Aaron Lackinger and ,
  • José Mirão and
  • Beatriz Comendador Rey
  • + 1 author+ 0 author

30 September 2021

In the present work, a fragment of a stone mould recently found in Galicia (NW Spain) was studied by multiple analytical techniques approach involving 3D optical imaging reconstruction to obtain data about the shape of the mould, typology of artefact...

  • Article
  • Open Access
1 Citations
664 Views
12 Pages

17 May 2026

This study systematically investigated the mechanism of micro-segregation reduction in a high-Mn austenitic cryogenic steel continuous casting slab using thermodynamic calculations and homogenization experiments. The high-Mn austenitic cryogenic stee...

(This article belongs to the Special Issue Research on Microstructure Evolution and Properties of High-Strength Steel (2nd Edition))
  • Article
  • Open Access
14 Citations
2,796 Views
18 Pages

Research on the Application of Microcast Electromagnetic Coil in an Si MEMS Bistable Recoverable Safety and Arming Device

  • Sining Lv,
  • Hengzhen Feng,
  • Wenzhong Lou,
  • Chuan Xiao and ,
  • Wenting Su,
  • Wenxing Kan and
  • Bo He
  • + 2 authors+ 0 author

30 June 2023

A low-driving energy and bistable recoverable MEMS safety and arming device (S&A), based on microcasting technology and deep silicon etching technology, is proposed to meet safety system requirements. A force–electromagnetic combination sol...

  • Feature Paper
  • Article
  • Open Access
8 Citations
4,252 Views
15 Pages

Double-Deck Metal Solenoids 3D Integrated in Silicon Wafer for Kinetic Energy Harvester

  • Nianying Wang,
  • Ruofeng Han,
  • Changnan Chen,
  • Jiebin Gu and
  • Xinxin Li

12 January 2021

A silicon-chip based double-deck three-dimensional (3D) solenoidal electromagnetic (EM) kinetic energy harvester is developed to convert low-frequency (<100 Hz) vibrational energy into electricity with high efficiency. With wafer-level micro elect...

(This article belongs to the Section A: Physics)
  • Feature Paper
  • Article
  • Open Access
5 Citations
5,445 Views
19 Pages

Microstructure Control of Tubular Micro-Channelled Supports Fabricated by the Phase Inversion Casting Method

  • Yuliang Liu,
  • Arash Rahimalimamaghani,
  • Martin van Sint Annaland and
  • Fausto Gallucci

31 May 2019

Thin-film membrane layers coated onto porous supports is widely considered as an efficient way to obtain high-performance oxygen transport membranes with both good permeability and high mechanical strength. However, conventional preparation methods o...

(This article belongs to the Special Issue Catalysis in Membrane Reactors)
  • Article
  • Open Access
16 Citations
5,865 Views
13 Pages

5 September 2018

Herein, we describe in detail a methodology to estimate the effective elastic parameters of nodular cast iron, using micro-tomography in conjunction with multiscale finite elements. We discuss the adjustment of the image acquisition parameters, addre...

(This article belongs to the Special Issue Cast Irons: Properties and Applications)
  • Article
  • Open Access
7 Citations
3,400 Views
19 Pages

Low Cycle Fatigue of G20Mn5 Cast Steel Relation between Microstructure and Fatigue Life

  • Antonin Bermond,
  • Claire Roume,
  • Jacques Stolarz,
  • Matthieu Lenci and ,
  • Jean-François Carton and
  • Helmut Klocker
  • + 1 author+ 0 author

11 October 2022

Cast steel is commonly used to produce structural and safety parts. Foundry processes allow producing parts from scrap steel directly to the required dimensions without any forming operation. Cast components may, however, exhibit macro- and micro-shr...

(This article belongs to the Special Issue Fracture Mechanics and Fatigue Damage of Materials and Structures)
  • Article
  • Open Access
1,144 Views
14 Pages

25 December 2025

Enhancing the local mechanical response of low-carbon cast steels remains essential for improving their performance in wear-intensive environments. In this work, a low-carbon cast steel was locally modified through the in situ formation of TiC partic...

(This article belongs to the Section Metal Matrix Composites)
  • Article
  • Open Access
11 Citations
3,036 Views
11 Pages

MEMS Fluxgate Sensor Based on Liquid Casting

  • Ying Yang,
  • Wei Xu,
  • Guangyuan Chen,
  • Zhenhu Jin and ,
  • Dandan Wang,
  • Zhihong Mai,
  • Guozhong Xing and
  • Jiamin Chen
  • + 3 authors+ 0 author

26 November 2023

Compared with electroplating, liquid casting enables the rapid formation of a three-dimensional solenoid coil with a narrower line width and greater thickness, which proves advantageous in enhancing the comprehensive performance of the micro-electrom...

(This article belongs to the Special Issue Micro and Nanosensors: Fabrication, Applications and Performance Enhancements)
  • Article
  • Open Access
23 Citations
4,389 Views
17 Pages

Effects of Cast-Iron Surface Texturing on the Anti-Scuffing Performance under Starved Lubrication

  • Wenhua Li,
  • Baihong Yu,
  • Bin Ye,
  • Yan Shen and ,
  • Ruoxuan Huang and
  • Fengming Du
  • + 1 author+ 0 author

15 May 2019

Advances in heavy-duty diesel engine designs place higher demands on the friction and wear performance of the piston ring and cylinder liner (PRCL) interface. The potential of using micro-textures machined on the whole stroke of a cast-iron cylinder...

(This article belongs to the Special Issue Tribology: Friction and Wear of Engineering Materials)
  • Article
  • Open Access
9 Citations
2,317 Views
14 Pages

29 September 2024

The effects of solid-solution and ageing treatments on the microstructure and mechanical properties of a GH4169 alloy made by wire arc additive manufacturing, micro-casting, and forging were researched. The microstructure, along with the size and typ...

(This article belongs to the Section Additive Manufacturing)
  • Review
  • Open Access
79 Citations
10,034 Views
18 Pages

16 May 2022

Microfluidic platform technology has presented a new strategy to detect and analyze analytes and biological entities thanks to its reduced dimensions, which results in lower reagent consumption, fast reaction, multiplex, simplified procedure, and hig...

(This article belongs to the Special Issue Polymer Micro/Nanofabrication and Manufacturing)
  • Article
  • Open Access
7 Citations
2,397 Views
17 Pages

15 February 2024

The influence of Ti on the behavior of hot ductility was examined in four different Ti-containing micro-alloyed steels with a constant content of Nb. Thermomechanical investigations using a dilatometer were carried out to simulate the conditions duri...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
19 Citations
5,472 Views
25 Pages

Casting Light on the Micro-Organisms in Digestate: Diversity and Untapped Potential

  • Ashira Roopnarain,
  • Muyiwa Ajoke Akindolire,
  • Haripriya Rama and
  • Busiswa Ndaba

Anaerobic digestion (AD) is an established process for waste conversion to bioenergy. However, for the AD process to be viable, it is imperative that all products be adequately valorized to maximize the benefits associated with the technology and in...

(This article belongs to the Special Issue Energy Converter: Anaerobic Digestion)
  • Article
  • Open Access
2 Citations
5,354 Views
16 Pages

Genetic Algorithm-Based Optimization Methodology of Bézier Curves to Generate a DCI Microscale-Model

  • Jesus A. Basurto-Hurtado,
  • Roque A. Osornio-Rios,
  • Arturo Y. Jaen-Cuellar,
  • Aurelio Dominguez-Gonzalez and
  • L. A. Morales-Hernandez

28 November 2017

The aim of this article is to develop a methodology that is capable of generating micro-scale models of Ductile Cast Irons, which have the particular characteristic to preserve the smoothness of the graphite nodules contours that are lost by discreti...

(This article belongs to the Section Mechanical Engineering)
  • Technical Note
  • Open Access
15 Citations
5,491 Views
17 Pages

22 December 2021

In recent years, there has been an increased interest in exploring the potential of micro-and mesoscale milling technologies for developing cost-effective microfluidic systems with high design flexibility and a rapid microfabrication process that doe...

(This article belongs to the Section E: Engineering and Technology)
  • Feature Paper
  • Article
  • Open Access
586 Views
23 Pages

15 September 2026

Magnesium–yttrium (Mg–Y) alloys are promising biodegradable orthopedic implant materials because of their mechanical compatibility with bone tissue; however, their degradation rate in physiological environments requires further control. I...

(This article belongs to the Section Metal Surface Process)
  • Article
  • Open Access
3 Citations
2,313 Views
18 Pages

21 November 2023

Purpose: The objective of the study was to qualitatively assess the micro-gap dimensions, connecting fitting surface profile, and bacterial leakage of cast high-gold-alloy UCLA abutments, with or without electrodeposited gold coatings attached to ext...

(This article belongs to the Special Issue Advances in Surface Engineering and Biocompatible Coatings for Biomedical Applications)
  • Article
  • Open Access
52 Citations
5,832 Views
15 Pages

23 July 2019

To improve the drag-reducing and antifouling performance of marine equipment, it is indispensable to learn from structures and materials that are found in nature. This is due to their excellent properties, such as intelligence, microminiaturization,...

(This article belongs to the Special Issue Implantable Microdevices)
  • Article
  • Open Access
4 Citations
3,026 Views
12 Pages

Researches on the Macro- and Micro-Structures and Properties of the Vertical Bending Continuous Casted AA6063 Thin Slabs and Their As-Rolled Sheets

  • Zhuo-Huang Wu,
  • Qi-Jia Mao,
  • Fu-An Hua,
  • Guang-Lin Jia and ,
  • Jian-Ping Li,
  • Cheng-Gang Li,
  • Guo Yuan and
  • Guo-Dong Wang
  • + 3 authors+ 0 author

12 November 2022

A 6063 aluminum alloy thin slab with a cross-section of 260 × 40 mm2 was prepared by a vertical bending continuous casting (VC) process. The effects of homogenization, hot rolling and subsequent heat treatments on the microstructure and propert...

(This article belongs to the Special Issue Advances in Casting, Thermomechanical and Heat Treatments of Aluminum Alloy)
  • Article
  • Open Access
44 Citations
6,305 Views
24 Pages

9 July 2020

Mechanical performance of cast aluminum alloys is strongly affected by the defects formed during solidification. For example, fractography studies of the fatigue specimens have shown that fatigue failure in aluminum castings containing defects is alm...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
471 Views
14 Pages

Protocol for Post-Mortem Micro-CT Imaging of Coronary Arteries in Low-Mass Neonatal Puppy Hearts Using Barium-Based Contrast

  • Agata Godlewska,
  • Olga Szaluś-Jordanow,
  • Anna Jaśkiewicz,
  • Jakub Jaroszewicz and ,
  • Wojciech Święszkowski,
  • Wojciech Mądry,
  • Michał Buczyński and
  • Karolina Barszcz
  • + 3 authors+ 0 author

26 May 2026

Aim: We aimed to provide a structured ex vivo protocol for cardiopulmonary micro-CT that combines gelatin–barium sulfate (gelatin–BaSO4) contrast medium with agar embedding in neonatal canine cardiopulmonary specimens. Materials and Metho...

(This article belongs to the Special Issue Recent Advances in Veterinary Anatomy and Morphology)
  • Article
  • Open Access
2 Citations
2,051 Views
14 Pages

15 February 2023

Microscopic content segregation is among the important reasons for the anisotropy of mechanical properties in the cast-rolled sheets of the 7B05 aluminum alloy. It is of great significance to study the uniformity of aluminum alloys in terms of the mi...

  • Article
  • Open Access
4 Citations
2,405 Views
22 Pages

11 October 2025

Throughout history, cultural heritage has accumulated, and is often embodied in monuments, structures, and notable figures. Cultural heritage preservation and management also include digitalization, allowing tangible monuments to be managed as digita...

  • Article
  • Open Access
7 Citations
3,800 Views
14 Pages

3 October 2019

A new type of Mg-based metallic glass has attracted extensive attention due to its excellent corrosion resistance and favorable biocompatibility. In this study, an amorphous/crystalline composite Mg-RE alloy sheet was prepared by a vertical type twin...

(This article belongs to the Special Issue Recent Advancements in Metallic Glasses)
  • Article
  • Open Access
4 Citations
5,408 Views
24 Pages

19 November 2021

This paper proposes the bio-fabrication of a porous scaffold from a selection procedure of elements taking into account biological behavior, using magnesium (Mg) alloyed with calcium (Ca) and zinc (Zn). The proposed scaffold could work as a treatment...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
40 Citations
4,015 Views
19 Pages

30 May 2023

Selective laser melting (SLM) is a three-dimensional (3D) printing process that can manufacture functional parts with complex geometries as an alternative to using traditional processes, such as machining wrought metal. If precision and a high surfac...

(This article belongs to the Special Issue Laser Additive Manufacturing of Metallic Materials)
  • Article
  • Open Access
9 Citations
2,256 Views
20 Pages

10 October 2023

The AZ series of Mg alloys have become promising in several industrial fields thanks to its potential microstructure refinement and the β-Mg17Al12 eutectic that controls the mechanical behaviour. Simultaneously, the rapid degradation characteriz...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
2,135 Views
14 Pages

Effect of Combined Addition of CeLa and GdY on Microstructure and Mechanical Properties of As-Cast Al-Cu-Mn Alloys

  • Haiyang Zhang,
  • Mingdong Wu,
  • Zeyu Li,
  • Daihong Xiao and ,
  • Yang Huang,
  • Lanping Huang and
  • Wensheng Liu
  • + 2 authors+ 0 author

25 November 2023

In this study, the effects of the combined addition of CeLa and GdY on the microstructure and mechanical properties of as-cast Al-4Cu-1Mn alloys were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron m...

  • Article
  • Open Access
25 Citations
9,472 Views
13 Pages

Compensation for Geometrical Deviations in Additive Manufacturing

  • Christoph Hartmann,
  • Philipp Lechner,
  • Benjamin Himmel,
  • Yannick Krieger and ,
  • Tim C. Lueth and
  • Wolfram Volk
  • + 1 author+ 0 author

The design of additive manufacturing processes, especially for batch production in industrial practice, is of high importance for the propagation of new additive manufacturing technology. Manual redesign procedures of the additive manufactured parts...

(This article belongs to the Special Issue Reviews and Advances in Materials Processing)
  • Article
  • Open Access
8 Citations
3,114 Views
16 Pages

Influence of Salt Support Structures on Material Jetted Aluminum Parts

  • Benedikt Kirchebner,
  • Maximilian Ploetz,
  • Christoph Rehekampff,
  • Philipp Lechner and
  • Wolfram Volk

21 July 2021

Like most additive manufacturing processes for metals, material jetting processes require support structures in order to attain full 3D capability. The support structures have to be removed in subsequent operations, which increases costs and slows do...

(This article belongs to the Special Issue Characterization Methods for Metal Cast Processes)
  • Article
  • Open Access
7 Citations
4,672 Views
12 Pages

Effect of Primary Crystals on Pore Morphology during Semi-Solid Foaming of A2024 Alloys

  • Takashi Kuwahara,
  • Mizuki Saito,
  • Taro Osaka and
  • Shinsuke Suzuki

16 January 2019

We investigated pore formation in aluminum foams by controlling primary crystal morphology using three master alloys. The first one was a direct chill cast A2024 (Al-Cu-Mg) alloy (DC-cast alloy). The others were A2024 alloys prepared to possess fine...

(This article belongs to the Special Issue Cellular Metals: Fabrication, Properties and Applications)
  • Article
  • Open Access
9 Citations
4,301 Views
16 Pages

Optimizing the surface topography of cast iron crankshafts offers the opportunity to use this material as an alternative to steel in high-performance combustion engines. In the past, this was not possible due to the higher wear on bearing shells and...

(This article belongs to the Special Issue Fluid-Film Lubrication II)
  • Article
  • Open Access
13 Citations
4,002 Views
12 Pages

Comparison of Marginal Integrity and Surface Roughness of Selective Laser Melting, CAD-CAM and Digital Light Processing Manufactured Co-Cr Alloy Copings

  • Abdulaziz S. Alqahtani,
  • Abdullah M. AlFadda,
  • Malek Eldesouky,
  • Mazen K. Alnuwaiser and ,
  • Samar Al-Saleh,
  • Saad Alresayes,
  • Abdullah Alshahrani,
  • Fahim Vohra and
  • Tariq Abduljabbar
  • + 4 authors+ 0 author

8 September 2021

The purpose of the present study was to evaluate the influence of fabrication techniques on the surface micro-roughness (Ra) and marginal misfit of cobalt chromium (CoCr) copings. A mandibular first molar was prepared for a metal ceramic crown. Forty...

(This article belongs to the Special Issue Celebrating Applied Sciences Reaches 20,000 Articles Milestone: Invited Papers in "Applied Dentistry and Oral Sciences" Section)
  • Article
  • Open Access
7 Citations
5,350 Views
20 Pages

16 June 2021

Pore casting refers to filling the void spaces of porous materials with an extraneous fluid, usually epoxy resin, to obtain a high-strength composite material, stabilize a fragile porous structure, produce a three-dimensional replica of the pore spac...

  • Feature Paper
  • Article
  • Open Access
17 Citations
5,530 Views
13 Pages

13 April 2022

High silicon and molybdenum (SiMo) ductile iron is commonly used for car exhaust systems, and its micro-structural dispersity depends on intrinsic parameters, which include alloy composition and inoculation efficiency, as well as extrinsic factors, s...

(This article belongs to the Topic Materials and Surface Treatment Processes Used for Engineering Applications)
  • Article
  • Open Access
5 Citations
3,949 Views
9 Pages

Digital Procedures Compared to Conventional Gypsum Casts in the Manufacturing of CAD/CAM Adhesive Restorations: 3D Surface Trueness and Interfacial Adaptation Analysis

  • Andrea Baldi,
  • Allegra Comba,
  • Edoardo Alberto Vergano,
  • Michail L. Vakalis and ,
  • Mario Alovisi,
  • Damiano Pasqualini,
  • Giorgio Ferrero,
  • Edoardo Italia,
  • Riccardo Michelotto Tempesta and
  • Nicola Scotti
  • + 6 authors+ 1 author

30 May 2021

Objective. The purpose of this ex vivo study was to compare the trueness of traditional and digital workflows and to analyze the interfacial fit of CAD/CAM restorations on gypsum and 3D-printed casts (3DC). Methods: Forty patients underwent indirect...

(This article belongs to the Special Issue Advances in Dental Materials: A Look inside Digital Workflows)
  • Article
  • Open Access
10 Citations
2,839 Views
14 Pages

Micro-Scale Deformation Aspects of Additively Fabricated Stainless Steel 316L under Compression

  • Abdulaziz Kurdi,
  • Ahmed Degnah,
  • Thamer Tabbakh,
  • Husain Alnaser and
  • Animesh Kumar Basak

17 January 2024

The deformation aspects associated with the micro-mechanical properties of the powder laser bed fusion (P-LBF) additively manufactured stainless steel 316L were investigated in the present work. Toward that, micro-pillars were fabricated on different...

(This article belongs to the Special Issue Design, Optimization, Simulation, and Defect Detection for Additive Manufacturing)
  • Article
  • Open Access
20 Citations
6,972 Views
18 Pages

6 October 2018

In this work, segregation in the cast and hot worked structure, as well as the effects of soaking on macro and micro segregation, in hypereutectoid bearing steel produced by ingot casting were studied. Samples were selected from ingots that where eit...

  • Article
  • Open Access
2 Citations
3,003 Views
13 Pages

Effect of Processing Route on Microstructure and Mechanical Properties of an Al-12Si Alloy

  • Abdulrahman Alsolami,
  • Adnan Zaman,
  • Fahad Alshabouna,
  • Abdulaziz Kurdi and ,
  • Ahmed Degnah,
  • Salman Alfihed,
  • Thamer Tabbakh and
  • Animesh Kumar Basak
  • + 3 authors+ 0 author

28 September 2024

Two different microstructures of an Al-12Si (wt. %) alloy were produced, respectively, via a powder laser bed fusion (P-LBF) additive manufacturing and casting. Compared to casting, additive manufacturing of Al-based alloy requires extra care to mini...

(This article belongs to the Topic Development of Light Alloys with Excellent Mechanical Properties)
  • Article
  • Open Access
31 Citations
4,256 Views
13 Pages

Investigation of the Mechanical Behavior of Synthesized Al6061/TiO2 Microcomposites Using an Innovative Stir Casting Method

  • A. H. Badran,
  • Turki Alamro,
  • Rabeea W. Bazuhair,
  • Ahmed Ali Gad El-Mawla and ,
  • S. Z. El-Adben and
  • Ahmed Fouly
  • + 1 author+ 0 author

12 May 2022

Aluminum composites are preferred in many kinds of applications such as aviation, space, automotive, and marine, owing to their outstanding properties, high strength, and corrosion resistance. The main objective of the current study is to evaluate th...

(This article belongs to the Special Issue Metal-Matrix Nanocomposites and Their Applications)
  • Article
  • Open Access
13 Citations
4,204 Views
19 Pages

Experiment and Numerical Simulation on Friction Ignition Response of HMX-Based Cast PBX Explosive

  • Junming Yuan,
  • Yue Qin,
  • Hongzheng Peng,
  • Tao Xia and ,
  • Jiayao Liu,
  • Wei Zhao,
  • Hu Sun and
  • Yan Liu
  • + 3 authors+ 0 author

13 April 2023

In order to study the ignition process and response characteristics of cast polymer-bonded explosives (PBX) under the action of friction, HMX-based cast PBX explosives were used to carry out friction ignition experiments at a 90° swing angle and...

(This article belongs to the Special Issue Advanced Energetic Materials: Testing and Modeling)
  • Article
  • Open Access
541 Views
17 Pages

Influence of Charge Composition on Microhardness and the ISE in EN GJL-250 Cast Iron

  • Peter Futas,
  • Jozef Petrik,
  • Miroslav Pástor,
  • Alena Pribulova and ,
  • Peter Blasko and
  • Mariusz Łucarz
  • + 1 author+ 0 author

25 July 2026

The manuscript aims to analyze the properties of gray cast iron EN GJL-250 as a function of the charge composition with an emphasis on microhardness and indentation size effect (ISE). Three compositions of cast iron were used: cast iron A as traditio...

(This article belongs to the Special Issue Mechanical and Structural Properties of Cast Irons)
  • Article
  • Open Access
3 Citations
5,364 Views
14 Pages

30 April 2020

To break through the limitation of fracture splitting process on material selection and solve problems during fracture splitting such as parts tearing, failing to split, dropping dregs, fracture surface deformation and so on, a new technique of setti...

of 9