656 Results Found

Graphite is a versatile material used in various fields, particularly in the power source manufacturing industry. Nowadays, graphite holds a unique position in materials for anode electrodes in lithium-ion batteries. With a carbon content of over 99%...

This study investigates a hybrid-battery thermal management system (BTMS) integrating air-cooling, a cold plate, and porous materials to optimize heat dissipation in a 20-cell battery pack during charging and discharging cycles of up to 5C. A computa...

In this study, graphene production via liquid-phase exfoliation assisted by sonication was evaluated using deionized water as a solvent and two graphite sources: one recovered from spent lithium-ion batteries (LIBs) and a commercial counterpart. A 75...

Li-ion batteries (LIBs) are one of the most deployed energy storage technologies worldwide, providing power for a wide range of applications—from portable electronic devices to electric vehicles (EVs). The growing demand for LIBs, coupled with...

More than 40 m length of drill cores were collected from four boreholes drilled by Geological Survey of Finland (GTK) and Outokumpu Oy in high-grade metamorphic rocks of Rautalampi and Käypysuo, Central Finland. The hosted rocks of the graphite...

All-vanadium redox flow batteries (VRFBs) are considered promising candidates for large-scale energy storage systems due to their flexible power scale design, high efficiency, deep discharge, long cycle life and environmental friendliness. The perfor...

This study investigates graphite separation from Lithium-Ion Battery (LIB) black mass (which is a mixture of anode and cathode materials) via froth flotation coupled with an open-loop recycling approach for the graphite (froth) product. Black mass sa...

Vanadium redox flow batteries (VRFBs) are one of the most attractive devices for grid-scale energy storage due to their advantages of high safety, flexible assembly, and electrolyte-class recycling. However, the conventional graphite felt electrodes...

The iron–chromium redox flow battery (ICRFB) has a wide range of applications in the field of new energy storage due to its low cost and environmental protection. Graphite felt (GF) is often used as the electrode. However, the hydrophilicity an...

Lithium-ion batteries with ultra-thick electrodes have high energy density and low manufacturing costs because of the reduction of the inactive materials in the same battery volume. However, the partial usage of the full capacity and the low rate cap...

Natural graphite (NG) is abundant and has a high capacity for lithium-ion storage, but its narrow interlayer spacing and poor cyclic stability limit its use in high-performance lithium-ion batteries (LIBs). To address this, a N/S co-doped micro-expan...

In an all-vanadium redox flow battery (VRFB), redox reaction occurs on the fiber surface of the graphite felts. Therefore, the VRFB performance highly depends on the characteristics of the graphite felts. Although atmospheric pressure plasma jets (AP...

In this study, a simple and environment-friendly method of preparing activated graphite felt (GF) for a vanadium redox flow battery (VRFB) by depositing the vanadium precursor on the GF surface and calcining vanadium oxide was explored. The intermedi...

Commercial graphite anode has advantages such as low potential platform, high electronic conductivity, and abundant reserves. However, its theoretical capacity is only 372 mA h g−1. High-energy lithium-ion batteries have been a research hotspot...

Current research focuses on lithium-ion battery cells with a high energy density and efficient fast-charging capabilities. However, transport limitations, and, therefore, the uniform diffusion of lithium-ions across the electrode layers, remain a cha...

Lead-acid battery (LAB) weight is a major downside stopping it from being adapted to electric/hybrid vehicles. Lead grids constitute up to 50% of LAB electrode’s weight and it only ensures electric connection to electrochemically active materia...

Spent batteries recycling is an important way to obtain low-cost graphite. Nevertheless, the obtaining of crystalline graphite with a rather low density of defects is required for many applications. In the present work, high-quality graphites have be...

Lithium-ion batteries (LIBs) using a LiFePO4 cathode and graphite anode were assembled in coin cell form and subjected to 1000 charge-discharge cycles at 1, 2, and 5 C at 25 °C. The performance degradation of the LIB cells under different C-rates...

Dual-intercalation batteries implement graphite electrodes as both cathodes and anodes and offer high specific energy, inexpensive and environmentally sustainable materials, and high operating voltages. Our research investigated the influence of surf...

Carbon xerogels with different macropore sizes and degrees of graphitization were evaluated as electrodes in lithium-ion batteries. It was found that pore structure of the xerogels has a marked effect on the degree of graphitization of the final carb...

The paper describes one promising method and approach for the recycling, reuse, and co-resource treatment of waste photovoltaic silicon and lithium battery anode graphite. Specifically, this work considers the preparation of nano/micron silicon carbi...

In recent years, novel Al secondary batteries with Al anodes, natural graphite cathodes, and ionic liquid electrolytes have received more attention. However, most research on Al secondary batteries used lower graphite loading (<8 mg/cm2), which wi...

Aimed at the growing interest in printed batteries, widely used industrial gravure printing was recently proven to be able to produce high-quality electrodes for lithium-ion batteries (LiBs), demonstrating its utility in the study of new functional m...

Reducing the particle size of active material is an effective solution to the poor rate performance of the lithium-ion battery. In this study, we proposed a facile strategy for the preparation of nano-graphite as an anode for a lithium-ion battery vi...

This study presents a sustainable upcycling strategy to convert “Pit,” a carbon-rich coke oven by-product from steel manufacturing, into high-purity graphite for use as an anode material in lithium-ion batteries. Despite its high carbon c...

The water-based binder has the advantages of non-toxic, non-flammable, small odor, and no pollution to the environment. However, there are problems such as low bond strength and poor battery cycle life of commonly used binders on the market. In this...

We investigate the reassembly techniques for utilizing fine graphite particles, smaller than 5 µm, as high-efficiency, high-rate anode materials for lithium-ion batteries. Fine graphite particles of two sizes (0.4–1.2 µm and 5 &micr...

The separation of graphite from cathode active materials containing Co, Ni, and Mn, and the metals Cu and Al by flotation was tested and evaluated with a black mass sample of crushed spent Li-ion batteries. The metals, Cu and Al, were mostly (>90%...

Traditional graphite anode material typically shows a low theoretical capacity and easy lithium decomposition. Molybdenum disulfide is one of the promising anode materials for advanced lithium-ion batteries, which possess low cost, unique two-dimensi...

Silicon-based anodes are extensively studied as an alternative to graphite for lithium ion batteries. However, silicon particles suffer larges changes in their volume (about 280%) during cycling, which lead to particles cracking and breakage of the s...

This study investigated the detrimental effect of graphite on metal recovery during sulfuric acid roasting of lithium-ion battery materials. While sulfuric acid roasting of black mass achieved excellent leaching efficiencies (>99%) for nickel and...

Graphene nanosheets (GNS) are synthesized from untreated natural graphite (NG) for use as electroactive materials in Li-ion batteries (LIBs), which avoids the pollution-generating steps of purifying graphite. Through a modified Hummer method and subs...

Lithium-ion batteries have rapidly become the most widely used energy storage devices in mobile electronic equipment, electric vehicles, power grid energy storage devices and other applications. Due to their outstanding stability and high conductivit...

Extensive research on electrode materials has been sparked by the rising demand for high-energy-density rechargeable lithium-ion batteries (LIBs). Graphite is a crucial component of LIB anodes, as more than 90% of the commercialized cathodes are coup...

In this work, phenyl methanesulfonate (PMS) is evaluated as an additive to enhance the cyclic stability of lithium-ion batteries (LIBs) based on a graphite electrode. According to the theoretical results obtained from density functional theory (DFT)...

Aero-eutectic graphite can be defined as a new light material with hierarchically structured porosity. It is obtained from the solidification of gray cast irons, followed by the dissolution of the ferrous matrix by an acidic sequence. The result is a...

A silicon nanoparticle–graphite nanosheet composite was prepared via a facile ball milling process for use as the anode for high-rate lithium-ion batteries. The size effect of Si nanoparticles on the structure and on the lithium-ion battery per...

Recently, due to the rapid increase in the demand for artificial graphite, there has been a strong need to improve the productivity of artificial graphite. In this study, we propose a new efficient process by eliminating the carbonation stage from th...

This study investigates the potential of graphite waste (GW) from the Acheson furnace as a sustainable and cost-effective anode material for lithium-ion batteries (LIBs). Conventional anode materials face challenges such as energy-intensive productio...

Lithium-ion batteries (LIBs) undoubtedly are considered a viable option to meet the ever-increasing demands for portable consumer electronic devices and electric vehicles. To meet this requirement, intensive research is being conducted on increasing...

The conversion of straw biomass into highly graphitized carbon materials is achieved through an efficient molten salt electrolysis process at moderate temperatures (900–950 °C). Increasing the electrolysis temperature significantly enhances...

Graphite, with appealing features such as good stability, high electrical conductivity, and natural abundance, is still the main commercial anode material for lithium-ion batteries. The charge-discharge rate capability of graphite anodes is not signi...

With the large-scale application of lithium-ion batteries (LIBs) in various fields, spent LIBs are considered one of the most important secondary resources. Few studies have focused on recycling anode materials despite their high value. Herein, a new...

In this paper, bismuth (Bi) was successfully deposited on graphite felts to improve the electrochemical performances of vanadium redox flow batteries. Modified graphite felts with different Bi particle loadings were obtained through electrochemical d...

This study presents a multiphysics simulation approach to optimize graphite-buffered bilayer anodes for enhanced energy density in lithium-ion batteries, assessing the electrochemical impact of diverse inner-layer materials, including silicon, hard c...

A helium (He) dielectric barrier discharge plasma jet (DBD jet) was used for the first time for treating graphite foil as the current collector of a paper-based fluidic aluminum-air battery. The main purpose was to improve the distribution of the cat...

The use of flow batteries for energy storage has attracted considerable attention with the increased use of renewable resources. It is well known that the performance of a flow battery depends, among other factors, on the properties of the electrodes...

The utilization of lithium–sulfur battery is hindered by various challenges, including the “shuttle effect”, limited sulfur utilization, and the sluggish conversion kinetics of lithium polysulfides (LiPSs). In the present work, a th...

Silicon-based electrodes offer a high theoretical capacity and a low cost, making them a promising option for next-generation lithium-ion batteries. However, their practical use is limited due to significant volume changes during charge/discharge cyc...

Silicon is a worthy substitute anode material for lithium-ion batteries because it offers high theoretical capacity and low working potentials vs. Li+/Li. However, immense volume changes and the low intrinsic conductivity of Si hampers its practical...