Previous Article in Journal
Low-Cost, Sustainable Hybrid Aqueous Zinc Metal Batteries Using Ethyl Cellulose as a Binder
Previous Article in Special Issue
Surface-Coating Strategies of Si-Negative Electrode Materials in Lithium-Ion Batteries
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Batteries
Volume 11
Issue 5
10.3390/batteries11050190
batteries-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
This is an early access version, the complete PDF, HTML, and XML versions will be available soon.
Article

A Modified Acrylic Binder Used for the Graphite Negative Electrode in LithiumIon Batteries

by
Lianxiang Feng
,
Wenting Chen
,
Feng Hai
,
Xin Gao
,
Yuyu Ban
,
Weicheng Xue
,
Wentao Yan
,
Yunxiao Yang
and
Mingtao Li
*
Shaanxi Key Laboratory of Energy Chemical Process Intensification, School of Chemical Engineering and Technology, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049, China
*
Author to whom correspondence should be addressed.
Batteries 2025, 11(5), 190; https://doi.org/10.3390/batteries11050190
Submission received: 25 December 2024 / Revised: 28 April 2025 / Accepted: 1 May 2025 / Published: 13 May 2025
(This article belongs to the Special Issue Functional Binders and Additives for Rechargeable Batteries)
Versions Notes

Abstract

The water-based binder has the advantages of non-toxic, non-flammable, small odor, and no pollution to the environment. However, there are problems such as low bond strength and poor battery cycle life of commonly used binders on the market. In this paper, the acrylic binder is modified. In addition, acrylic acid/methacrylic acid, acrylonitrile, and octadecyl acrylate/octadecyl methacrylate are copolymerized at high temperature, and a new binder for graphite anode is successfully developed. The binder can significantly improve the affinity between the graphite anode and the electrolyte and the integrity of the graphite particles during the cycle, so that the battery has better electrochemical performance. During the charge and discharge cycle of 1 C, the graphite anode coated with PAANa as a binder was able to cycle 360 cycles and remain stable, which is far better than the 192 cycles of the commercial binder LA133. It is proved that the experimental formula has a certain commercial application prospect.
Keywords: binder; lithium metal batteries; graphite binder; lithium metal batteries; graphite

Share and Cite

MDPI and ACS Style

Feng, L.; Chen, W.; Hai, F.; Gao, X.; Ban, Y.; Xue, W.; Yan, W.; Yang, Y.; Li, M. A Modified Acrylic Binder Used for the Graphite Negative Electrode in LithiumIon Batteries. Batteries 2025, 11, 190. https://doi.org/10.3390/batteries11050190

AMA Style

Feng L, Chen W, Hai F, Gao X, Ban Y, Xue W, Yan W, Yang Y, Li M. A Modified Acrylic Binder Used for the Graphite Negative Electrode in LithiumIon Batteries. Batteries. 2025; 11(5):190. https://doi.org/10.3390/batteries11050190

Chicago/Turabian Style

Feng, Lianxiang, Wenting Chen, Feng Hai, Xin Gao, Yuyu Ban, Weicheng Xue, Wentao Yan, Yunxiao Yang, and Mingtao Li. 2025. "A Modified Acrylic Binder Used for the Graphite Negative Electrode in LithiumIon Batteries" Batteries 11, no. 5: 190. https://doi.org/10.3390/batteries11050190

APA Style

Feng, L., Chen, W., Hai, F., Gao, X., Ban, Y., Xue, W., Yan, W., Yang, Y., & Li, M. (2025). A Modified Acrylic Binder Used for the Graphite Negative Electrode in LithiumIon Batteries. Batteries, 11(5), 190. https://doi.org/10.3390/batteries11050190

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop