We demonstrate a 1.5 μm methane-filled hollow-core fiber (HCF) amplifier that delivers 7.1 W of narrow-linewidth (<0.1 nm), near-diffraction-limited (M2 < 1.2) pulsed Raman output. The system is pumped by a 1064 nm pulsed fiber laser and amp...
In recent years, mid-infrared fiber lasers based on gas-filled photonic crystal hollow-core fibers (HCFs) have attracted enormous attention. They provide a potential method for the generation of high-power mid-infrared emissions, particularly beyond...
Nowadays, in fiber optic communications the growing demand in terms of transmission capacity has been fulfilling the entire spectral band of the erbium-doped fiber amplifiers (EDFAs). This dramatic increase in bandwidth rules out the use of EDFAs, le...
In recent years, the exploitation of compact laser sources and amplifiers in fiber form has found extensive applications in industrial and scientific fields. The fiber format offers compactness, high beam quality through single-mode regime and excell...
The most important components for application in high-power all-fiber lasers and amplifiers are, most of all, power combiners, but also mode field adaptors. This paper summarizes recent achievements in the area of development and fabrication of high-...
Polymer optical fibers (POFs) doped with organic dyes can be used to make efficient lasers and amplifiers due to the high gains achievable in short distances. This paper analyzes the peculiarities of light amplification in POFs through some experimen...
The development of unique optical materials that provide amplification and lasing in new wavelength ranges is a major scientific problem, the solution of which is becoming the basis for the emergence of new optical technologies, which are primarily t...
We demonstrated a straightforward approach to generate red and near-infrared laser emissions by a Raman-assisted four wave mixing (FWM) process in a nonlinear Yb-doped fiber amplifier, delivering 342 fs pulses of 241 nJ at 864 nm, 834 fs pulses of 21...
In this paper, the development of a high-power continuous wave (CW) fiber laser near 980 nm is reviewed. This review is focused primary on the power evolution resulting from the designation of Yb-doped fibers, which is important in the suppression of...
We demonstrate a generation of three lasing wavelengths with the assistance of Rayleigh backscattering as the stabilizer of peak power variations. The proposed laser consists of a combination of the semiconductor optical amplifier (SOA) and erbium-do...
We report a continuous-wave high-output power and narrow-linewidth all-fiber laser at 1550 nm with the master oscillator power amplifier (MOPA) configuration. An all-fiber distributed feedback seed laser was boosted by three cascaded fiber amplifiers...
We report on investigation the potential of a 7 wt% (8.35 × 1020 Tm3+/cm3) doped silicate fibers for high-gain fiber amplifiers. Such a high ion concentration significantly reduces the required fiber length of high-power 2 μm fiber laser systems and...
Graded-index fibers have been used in recent years to make high-power fiber lasers and amplifiers. Such fibers exhibit self-imaging, a phenomenon in which any optical beam periodically reproduces its original shape in undoped fibers (no gain). In thi...
Single-crystal fibers are an intermediate between laser crystals and doped glass fibers. They have the advantages of both guiding laser light and matching the efficiencies found in bulk crystals, which is making them ideal candidates for high-power l...
A laser master oscillator power amplifier (MOPA) system consisting of a fiber amplifier and a two-stage Yb:YAG single crystal fiber (SCF) is experimentally studied. The nonlinear stimulated Raman scattering (SRS) is avoided by limiting the output pow...
Limited by stimulated Raman scattering (SRS), amplified spontaneous emission (ASE) and transverse mode instability (TMI), it is challenging to achieve high-power laser output in ytterbium-doped fiber (YDF) lasers with operating wavelengths less than...
A silica resonator was demonstrated for random laser generation. The resonator consisted of a conventional microsphere fabricated in an optical fiber tip through electric arc discharge, and modifications to its geometry were carried out to create asy...
The limited availability of powerful, tunable, and reliable mid-infrared sources has historically prevented their widespread adoption in spectroscopy applications, even if most greenhouse gases’ fundamental absorption lines are found in this re...
This work demonstrates the use of an erbium-doped fiber amplifier (EDFA), a tunable bandpass filter (TBF), and a tunable delay line interferometer (TDLI) to form a ring laser that produces multi-format, multi-wavelength laser beams. The TDLI serves a...
An ytterbium-doped, mode-locking fiber front-end laser, delivering both a femtosecond seed laser and picosecond seed laser, was demonstrated. The fundamental repetition rate of the 1031 nm mode-locked laser was 32.77 MHz, realized with the all-polari...
Broadband wavelength-swept lasers (WSLs) are widely used as light sources in biophotonics and optical fiber sensors. Herein, we present a polygonal mirror scanning wavelength filter (PMSWF)-based broadband WSL using two semiconductor optical amplifie...
Stimulated Brillouin scattering (SBS) is the major factor that limits the maximum optical fiber output power in narrow linewidth applications, which include important fields such as passive optical networks (PONs), high-power fiber amplifiers, and la...
Stimulated Raman scattering (SRS) is a nonlinear optical effect, observed for the first time in 1962, which lies at the heart of fiber Raman amplifiers and fiber Raman lasers [...]
A coherent beam combination has the potential to revolutionize high-peak-power laser systems. However, achieving a high-average-power ultrashort pulse is difficult due to the accumulation of a nonlinear phase and gain narrowing. In this article, we d...
A selective and sensitive quartz enhanced photoacoustic spectroscopy (QEPAS) sensor, employing an erbium-doped fiber amplifier (EDFA), and a distributed feedback (DFB) laser operating at 1582 nm was demonstrated for simultaneous detection of ammonia...
Reflective semiconductor optical amplifier fiber cavity lasers (RSOA-FCLs) are appealing, colorless, self-seeded, self-tuning and cost-efficient upstream transmitters. They are of interest for wavelength division multiplexed passive optical networks...
Combining the advantages of high efficiency, environmental robustness, and anti-reflection behavior, oscillating-amplifying integrated fiber lasers have become popular for use in high-power laser structures in industrial applications, wherein the siz...
We report a thin-film optical amplifier integrated on a fiber facet based on polymer-coated distributed feedback (DFB) microcavities, which are fabricated on a planar substrate and then transferred onto fiber tips by means of a flexible transfer tech...
From the perspective of the differential phase delay experienced by the two counterpropagating optical fields, the self-starting of the mode-locked fiber laser with a non-linear amplifying loop mirror (NALM) is theoretically studied. Although it is g...
We report the preparation of a 780.2 nm and 852.3 nm laser device based on single-pass periodically poled magnesium-oxide-doped lithium niobate (PPMgO:LN) bulk crystals and diode-laser-seeded fiber amplifiers. First, a single-frequency continuously t...
In this work, we propose and demonstrate a novel approach to suppressing stimulated Raman scattering in an oscillating–amplifying integrated fiber laser (OAIFL) by changing the spectral bandwidth of the output-coupler fiber Bragg gratings (OC-F...
A simple, stable and inexpensive dual-output port widely tunable semiconductor optical amplifier (SOA)-based fiber compound-ring laser structure is demonstrated. This unique nested ring cavity enables high optical power to split into different branch...
In the present work, the effect of gamma radiation on the performance of different types of erbium-doped fibers (EDFs) when they are used in a fiber ring cavity (FRC) configuration is studied. Several pieces of commercial EDF are gamma-ray irradiated...
In this work we report on the thulium-doped silica-based optical fibers with increased fluorescence lifetime of the 3F4 level thanks to the modification of the local environment of thulium ions by high content of alumina. The determination of the cro...
This study delves into a comprehensive examination of an optical cavity system that integrates Raman and Yb-doped gain media, with a focus on understanding their interactions. The research implies a characterization of each gain medium within the cav...
We demonstrated a 1.1-µm band extended wideband wavelength-swept laser (WSL) that combined two semiconductor optical amplifiers (SOAs) based on a polygonal scanning wavelength filter. The center wavelengths of the two SOAs were 1020 nm and 1140 nm, r...
Octave-spanning supercontinuum conversion in three different rare-earth doped fiber amplifiers have been investigated. Using an erbium amplifier, it turned out to increase the output power to 445 mW with a spectral width of 1250 nm. For a thulium amp...
The spectrally flat supercontinuum generation in the wavelength range of 900–2400 nm is demonstrated in silica-based fibers of variable core diameter and dispersion. It is shown that, in comparison with standard optical fibers of the same lengt...
The technical process of the synthesis of a fluorophosphosilicate (FPS) glass core was thoroughly investigated for the first time utilizing a modified chemical vapor deposition (MCVD) all-gas-phase fabrication method. It was discovered that the limit...
A novel Yb-doped fiber design for improved lasing near 976 nm based on spectral filtering of the amplified spontaneous emission near 1030 nm was realized and investigated. A very sharp short-pass filter was implemented by adding appropriately chosen...
Supercontinuum (SC) generation that leads to the emission of broadband radiation has been extensively studied. In particular, SC sources encompassing the wavelength range of 2–5 μm have attracted considerable interest in the last decade, and...
Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological or medical sciences. While the microfluidic approach is already broadly addressed, some...
Multiphoton microscopy (MPM) has emerged as a vital tool in neuroscience, enabling deeper imaging with a broader field of view, as well as faster and sub-cellular resolution. Recent innovations in ultrafast fiber laser technology have revolutionized...
We investigated the dynamics of a dispersion-managed, passively mode-locked, ultrashort-pulse, Er-doped fiber laser using a single-wall carbon nanotube (SWNT) device. A numerical model was constructed for analysis of the SWNT fiber laser. The initial...
Fiber laser technology has been demonstrated as a versatile and reliable approach to laser source manufacturing with a wide range of applicability in various fields ranging from science to industry. The power/energy scaling of single-fiber laser syst...
We report a study on pulse dynamics in figure-nine Tm-doped all-polarization maintaining fiber laser. We analyzed laser operation from self-starting with multi-pulse dynamic to single-pulse operation by decreasing the pump power from the mode-locking...
In this paper, a four-channel optical emission module is developed using hybrid integration technology that integrates directly modulated laser (DML) chips, low-noise amplifier (LNA) chips, and control circuits, with dimensions of 24.4 mm × 21...
We report a high-speed (~2 kHz) dynamic multiplexed fiber Bragg grating (FBG) sensor interrogation using a wavelength-swept laser (WSL) with a polygon-scanner-based wavelength filter. The scanning frequency of the WSL is 18 kHz, and the 10 dB scann...
Thanks to the advantage of balancing nonlinear effects and transverse mode instability, vary core diameter active fiber (VCAF) has been widely used in high power ytterbium-doped fiber lasers in recent years. Up to now, VCAF has developed from the bas...
We report on a millijoule-level fiber–solid hybrid hundred-picosecond laser system with a stable performance and compact structure. The laser system is based on a master oscillator power amplifier structure containing an all-fiber master oscill...
of 5