Skip to Content

35 Results Found

  • Feature Paper
  • Article
  • Open Access
15 Citations
5,904 Views
18 Pages

Gold–Silver Electroless Plating on Laser Powder-Bed Fusion Additively Printed AlSi10Mg Parts

  • Alexandra Inberg,
  • Dana Ashkenazi,
  • Giora Kimmel,
  • Yosi Shacham-Diamand and
  • Adin Stern

26 April 2020

The current research presents a novel methodology for surface finishing of printed AlSi10Mg parts by electroless deposited gold–silver (electrum) alloys. The parts were printed by additive manufacturing laser powder-bed fusion (AM-LPBF). The electrum...

(This article belongs to the Special Issue AM-PBF Processes and Joining Similar/Dissimilar PBF Materials: Quo Vadis?)
  • Article
  • Open Access
6 Citations
5,506 Views
7 Pages

Laser-Induced Silver Seeding on Filter Paper for Selective Electroless Copper Plating

  • Chang-Chun Liu,
  • Jin Cheng,
  • Xiao-Qiang Li,
  • Zhi-Jie Gu and
  • Kenji Ogino

3 August 2018

The generation of a flexible printed circuit board on polymer fabrics has been a challenge over the last decade. In this work, a copper pattern was obtained on a soft substrate of filter paper/polyacrylonitrile (FP/PAN) film, where the filter paper w...

(This article belongs to the Special Issue Selective Laser Sintering (SLS) of Materials)
  • Article
  • Open Access
19 Citations
5,791 Views
21 Pages

Selective Electroless Copper Plating of Ink-Jet Printed Textiles Using a Copper-Silver Nanoparticle Catalyst

  • Golnaz Taghavi Pourian Azar,
  • Sofya Danilova,
  • Latha Krishnan,
  • Yirij Fedutik and
  • Andrew J. Cobley

25 August 2022

The electroless copper plating of textiles, which have been previously printed with a catalyst, is a promising method to selectively metallise them to produce high-reliability e-textiles, sensors and wearable electronics with wide-ranging application...

(This article belongs to the Special Issue Smart Textiles: Synthesis, Characterization and Application)
  • Article
  • Open Access
7 Citations
2,578 Views
14 Pages

Enhancing Effect of Chloride Ions on the Autocatalytic Process of Ag(I) Reduction by Co(II) Complexes

  • Loreta Tamašauskaitė-Tamašiūnaitė,
  • Aldona Jagminienė,
  • Ina Stankevičienė,
  • Karolis Ratautas and ,
  • Gediminas Račiukaitis and
  • Eugenijus Norkus
  • + 1 author+ 0 author

14 October 2020

In this work, the possibilities of increasing the rate of electroless silver plating without a rise in the concentration of reactants or elevation of temperature were studied. The effect of halide additive, namely chloride ions, on the rate of electr...

(This article belongs to the Special Issue Advances in Electroless Metal Deposition)
  • Article
  • Open Access
28 Citations
7,134 Views
16 Pages

Preparation of Conductive Polyester Fibers Using Continuous Two-Step Plating Silver

  • Changchun Liu,
  • Xuelian Li,
  • Xiaoqiang Li,
  • Tianze Xu and ,
  • Chunyu Song,
  • Kenji Ogino and
  • Zhijie Gu
  • + 2 authors+ 0 author

19 October 2018

Polyester fibers are used in various fields, due to their excellent mechanical and chemical stability. However, the lack of conductivity limits their application potential. In order to prepare conductive polyester fibers, silver is one of the most wi...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Communication
  • Open Access
1 Citations
2,221 Views
10 Pages

Electroless silver (Ag) plating has emerged as a simple yet effective surface modification technique, garnering significant attention in consumer electronics and composite materials. This study systematically investigates the influence of glucose dos...

  • Article
  • Open Access
5 Citations
5,168 Views
16 Pages

22 June 2022

Nickel-coated graphite (Ni/C) powder has many applications in diverse areas such as paint, print ink, adhesive, conductive rubber, and so on. To increase its stability in harsh environmental conditions, the electroless plating of silver film on Ni/C...

(This article belongs to the Special Issue Design and Application Based on Versatile Nano-Composites)
  • Article
  • Open Access
28 Citations
4,749 Views
17 Pages

Preparation of Silver-Plated Para-Aramid Fiber by Employing Low-Temperature Oxygen Plasma Treatment and Dopamine Functionalization

  • Zhenhua Sun,
  • Yanfen Zhou,
  • Wenyue Li,
  • Shaojuan Chen and ,
  • Shihua You and
  • Jianwei Ma
  • + 1 author+ 0 author

23 September 2019

Direct electroless silver plating of para-aramid (PPTA) is difficult due to its extremely low surface chemical energy. In order to facilitate the deposition of silver nanoparticles and to enhance the washing fastness, oxygen plasma treatment and dopa...

  • Communication
  • Open Access
48 Citations
5,354 Views
8 Pages

Novel Wearable Electrodes Based on Conductive Chitosan Fabrics and Their Application in Smart Garments

  • Haiming Qin,
  • Junrong Li,
  • Beihai He,
  • Jingbo Sun and ,
  • Lingrui Li and
  • Liying Qian
  • + 1 author+ 0 author

2 March 2018

Smart garments, which can capture electrocardiogram signals at any time or location, can alert others to the risk of heart attacks and prevent sudden cardiac death when people are sleeping, walking, or running. Novel wearable electrodes for smart gar...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
2 Citations
2,360 Views
13 Pages

Advancing Nanoscale Copper Deposition Through Ultrafast-Laser-Activated Surface Chemistry

  • Modestas Sadauskas,
  • Romualdas Trusovas,
  • Evaldas Kvietkauskas,
  • Viktorija Vrubliauskaitė and ,
  • Ina Stankevičienė,
  • Aldona Jagminienė,
  • Tomas Murauskas,
  • Dainius Balkauskas,
  • Alexandr Belosludtsev and
  • Karolis Ratautas
  • + 5 authors+ 0 author

Direct-writing submicron copper circuits on glass with laser precision—without lithography, vacuum deposition, or etching—represents a transformative step in next-generation microfabrication. We present a high-resolution, maskless method...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access

Preparation of Highly Efficient Thermal Management Wearable Textiles: Electric Heating Properties And Structural Analysis of Conductive Textiles

  • Si-Ling Lin,
  • Jin-Zhao Zhang,
  • Chun-Ming Zhao,
  • Yi Ren and ,
  • Long Li and
  • Wei Fan
  • + 1 author+ 0 author

30 September 2024

To prepare wearable personal thermal management fabric, conductive yarn was synthesised by in-situ polymerisation of polyaniline (PANI) and electroless silver plated nanoparticles (AgNPs) using acrylic (PAN) yarn as substrate. Subsequently, AgNPs/PAN...

  • Review
  • Open Access
28 Citations
8,700 Views
28 Pages

6 April 2021

Additive manufacturing (AM) revolutionary technologies open new opportunities and challenges. They allow low-cost manufacturing of parts with complex geometries and short time-to-market of products that can be exclusively customized. Additive manufac...

(This article belongs to the Special Issue Surface Modification for Additive Manufacturing: Materials, Processing, Applications and Future Challenges)
  • Article
  • Open Access
17 Citations
4,564 Views
15 Pages

Fabrication of Highly Conductive Silver-Coated Aluminum Microspheres Based on Poly(catechol/polyamine) Surface Modification

  • Mingzheng Hao,
  • Lei Li,
  • Xiaoming Shao,
  • Ming Tian and ,
  • Hua Zou,
  • Liqun Zhang and
  • Wencai Wang
  • + 2 authors+ 0 author

3 July 2022

A novel and cost-effective method for the fabrication of highly conductive Al/Ag core-shell structured microspheres was proposed and investigated. The oxidative co-deposition of catechol and polyamine was firstly performed to modify the surface of th...

(This article belongs to the Collection Polymers and Polymer Composites: Structure-Property Relationship)
  • Article
  • Open Access
1 Citations
4,516 Views
16 Pages

Optimization and Experimental Analysis of Electroless Nickel Plating on the Diamond Surface

  • Qingming Fan,
  • Guokang Su,
  • Congmin Zhu,
  • Hui Qi and ,
  • Pengfan Li,
  • Xiumei Shen,
  • Chuanyun Zhang and
  • Kai Cheng
  • + 3 authors+ 0 author

13 June 2025

Coating diamond particle surfaces with a layer of high-temperature resistant nickel, which possesses weldability, effectively enhances the bonding strength between diamond particles and substrates in pre-grinding tools. This improves their stability...

  • Article
  • Open Access
7 Citations
2,929 Views
13 Pages

Biosensors Fabricated by Laser-Induced Metallization on DLP Composite Resin

  • Ran Zhang,
  • Qinyi Wang,
  • Ya Chen,
  • Chen Jiao and ,
  • Fuxi Liu,
  • Junwei Xu,
  • Qiuwei Zhang,
  • Jiantao Zhao,
  • Lida Shen and
  • Changjiang Wang
  • + 5 authors+ 0 author

10 October 2022

With the growing emphasis on medical testing, people are seeking more technologies to detect indexes of the human body quickly and at a low cost. The electrochemical biosensors became a research hotspot due to their excellent properties. In this stud...

  • Article
  • Open Access
12 Citations
3,695 Views
15 Pages

14 November 2021

The paper presents the results of copper electroless metallization of cellulose paper with the use of a polydopamine coating and silver catalyst. The polydopamine coating was deposited via a simple dip method using a dopamine hydrochloride solution i...

(This article belongs to the Special Issue Innovative Technologies and Materials for Coatings and Surface Treatments)
  • Article
  • Open Access
18 Citations
3,511 Views
13 Pages

A Comparison Study of Ag Composites Prepared by Spark Plasma Sintering and Hot Pressing with Silver-Coated CNTs as the Reinforcements

  • Dongming Jia,
  • Junbing Ma,
  • Xueping Gan,
  • Jingmei Tao and ,
  • Ming Xie,
  • Jianhong Yi and
  • Yichun Liu
  • + 2 authors+ 0 author

17 June 2019

In this study, carbon nanotube-reinforced silver composites (CNT/Ag) were prepared by the powder metallurgy process via spark plasma sintering (SPS) and hot pressing sintering (HP) with composite powders through an improved electroless plating method...

  • Article
  • Open Access
8 Citations
2,911 Views
18 Pages

Electrospun Rubber Nanofiber Web-Based Dry Electrodes for Biopotential Monitoring

  • Mohammad Shamim Reza,
  • Lu Jin,
  • You Jeong Jeong,
  • Tong In Oh and ,
  • Hongdoo Kim and
  • Kap Jin Kim
  • + 1 author+ 0 author

24 August 2023

This study aims to find base materials for dry electrode fabrication with high accuracy and without reducing electrode performance for long-term bioelectric potential monitoring after electroless silver plating. Most applications of dry electrodes th...

(This article belongs to the Section Biomedical Sensors)
  • Article
  • Open Access
2 Citations
1,992 Views
12 Pages

31 October 2024

In this study, wettability was employed to evaluate the effect of alkali activation by NaOH on different fly ash (FA) particle sizes. The results indicated that the surface wettability of FA particles with 13.8 μm increased from 0.025 g2/s to 0.03...

  • Article
  • Open Access
32 Citations
6,488 Views
13 Pages

Paper-Based ZnS:Cu Alternating Current Electroluminescent Devices for Current Humidity Sensors with High–Linearity and Flexibility

  • Yaqin He,
  • Mengyao Zhang,
  • Nan Zhang,
  • Danrong Zhu and ,
  • Chun Huang,
  • Ling Kang,
  • Xiaofeng Zhou,
  • Menghan Hu and
  • Jian Zhang
  • + 4 authors+ 0 author

23 October 2019

Humidity sensors are indispensable for various electronic systems and instrumentations. To develop a new humidity sensing mechanism is the key for the next generation of sensor technology. In this work, a novel flexible paper-based current humidity s...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
2 Citations
2,443 Views
16 Pages

1 February 2026

Silver-coated copper powder, possessing both excellent electrical conductivity and cost advantages, holds broad application prospects in electronic packaging and conductive materials. This study investigates the surface characteristics of copper powd...

(This article belongs to the Collection Feature Papers Collection in 'Surface Characterization, Deposition and Modification')
  • Article
  • Open Access
815 Views
8 Pages

17 October 2025

Many viruses, bacteria, and pollen that cause diseases such as COVID-19 are inhaled by humans as aerosols. Therefore, wearing a mask to block pathogen-containing aerosols is crucial for disease prevention. However, current masks have a drawback&mdash...

(This article belongs to the Special Issue Thin Film Microelectronic Devices and Circuits, 2nd Edition)
  • Article
  • Open Access
1 Citations
1,405 Views
16 Pages

Cost-Effective Fabrication of Silica–Silver Microspheres with Enhanced Conductivity for Electromagnetic Interference Shielding

  • Mingzheng Hao,
  • Zhonghua Huang,
  • Wencai Wang,
  • Zhaoxia Lv and ,
  • Tao Zhang,
  • Wenjin Liang and
  • Yurong Liang
  • + 2 authors+ 0 author

18 September 2025

A green and cost-effective method was employed to efficiently synthesize conductive silica–silver (SiO2/PCPA/Ag) core–shell structured microspheres. The SiO2 microspheres were initially functionalized with poly(catechol-polyamine), follow...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
762 Views
20 Pages

20 June 2026

To address the application bottlenecks of organic phase change materials characterized by low thermal conductivity and susceptibility to liquid leakage, this study utilized natural poplar wood as a raw material to construct a three-dimensional carbon...

(This article belongs to the Topic Multifunctional Porous Materials: Preparation, Structure, Modeling and Applications)
  • Article
  • Open Access
12 Citations
5,582 Views
18 Pages

Electroless Deposition of Ni-P Coatings on HNBR for Low Friction Rubber Seals

  • Beatriz Vasconcelos,
  • Ricardo Serra,
  • João Oliveira and
  • Carlos Fonseca

17 December 2020

This paper reports a simple and cost-effective procedure to coat hydrogenated nitrile butadiene rubber (HNBR) with a well-adherent Ni-P film by using the electroless plating method. A HNBR surface functionalization process was first optimized, creati...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
7 Citations
3,017 Views
14 Pages

Highly Conducting Surface-Silverized Aromatic Polysulfonamide (PSA) Fibers with Excellent Performance Prepared by Nano-Electroplating

  • Ruicheng Bai,
  • Pei Zhang,
  • Xihai Wang,
  • Hengxin Zhang and ,
  • Hao Wang and
  • Qinsi Shao
  • + 1 author+ 0 author

2 January 2024

In this work, bilayer nanocoatings were designed and constructed on high-performance aromatic polysulfonamide (PSA) fibers for robust electric conduction and electromagnetic interference (EMI) shielding. More specifically, PSA fibers were first endow...

  • Feature Paper
  • Review
  • Open Access
45 Citations
10,252 Views
25 Pages

Recent Progress in Development and Applications of Ionic Polymer–Metal Composite

  • Si Won Park,
  • Sang Jun Kim,
  • Seong Hyun Park,
  • Juyeon Lee and ,
  • Hyungjun Kim and
  • Min Ku Kim
  • + 1 author+ 0 author

11 August 2022

Electroactive polymer (EAP) is a polymer that reacts to electrical stimuli, such as voltage, and can be divided into electronic and ionic EAP by an electrical energy transfer mechanism within the polymer. The mechanism of ionic EAP is the movement of...

(This article belongs to the Special Issue Hybrid Organic Electronics: Material, Structure and Application)
  • Article
  • Open Access
11 Citations
6,296 Views
14 Pages

Fabric Electrode Monitoring of Dynamic and Static ECG Signal and Comfort Performance

  • Jinli Zhou,
  • Yazhou Zhang,
  • Hongying Yang,
  • Qingxia Liu and ,
  • Ming Wang,
  • Fan Xiong,
  • Dongyi Chen and
  • Lixin Du
  • + 3 authors+ 0 author

27 January 2023

To monitor dynamic ECG for a long time, fabric electrodes must have excellent comfort and electrical properties. In addition, the quality of the collected ECG should be as free as possible from interference by motion artifacts due to dry skin and bod...

(This article belongs to the Special Issue New Developments of Protective Coatings, Organic Polymers, and Surface Analysis)
  • Article
  • Open Access
2 Citations
3,182 Views
15 Pages

Electroless Copper Patterning on TiO2-Functionalized Mica for Flexible Electronics

  • Bozhidar I. Stefanov,
  • Boriana R. Tzaneva,
  • Valentin M. Mateev and
  • Ivo T. Iliev

25 October 2024

The formation of conductive copper patterns on mica holds promise for developing cost-effective flexible electronics and sensing devices, though it is challenging due to the low adhesion of mica’s atomically flat surface. Herein, we present a w...

(This article belongs to the Section Chemical and Molecular Sciences)
  • Article
  • Open Access
468 Views
19 Pages

Low-Shrinkage 3D-Printed Polymeric Microneedle Arrays with Electroless Silver Coating for Enhanced Thermal and Mechanical Performance in Dermatological Applications

  • Yafen Xu,
  • Shuyan Li,
  • Jun Liu,
  • Zhongkai Li and ,
  • Xiaofang Pan,
  • Danya Li,
  • Shoujing Mao,
  • Wenxin Liu,
  • Yangyang Li and
  • Jieyue Wang
  • + 8 authors+ 3 authors

16 September 2026

Microneedling has found various applications in dermatology recently. However, many problems still need to be solved in the fabrication of high-aspect-ratio polymeric microneedles with good mechanical strength, dimensional accuracy and thermal conduc...

(This article belongs to the Special Issue Advanced 3D Printing Polymeric Materials: Design, Fabrication and Applications)
  • Article
  • Open Access
4 Citations
1,322 Views
13 Pages

The rapid dissipation of soft metal lubricants would deteriorate the self-lubricating properties of the coatings at elevated temperatures. In this study, the core-shell structured Mo@Ag@Ni particles were prepared via electroless plating to suppress t...

  • Article
  • Open Access
8 Citations
3,274 Views
17 Pages

27 April 2025

To enhance the high-temperature resistance of silicone rubber and meet the application requirements of flexible conductive silicone rubber under elevated temperature conditions, this study adopts a chemical modification strategy by introducing phenyl...

(This article belongs to the Special Issue Functional Polymers: Interaction, Surface, Processing and Applications: 3rd Edition)
  • Article
  • Open Access
6 Citations
3,151 Views
15 Pages

8 December 2021

This paper describes a low-temperature metallization and laser trimming process for microwave dielectric ceramic filters. The ceramic was metalized by electroless copper plating at a temperature lower than those of conventional low-temperature co-fir...

(This article belongs to the Special Issue Materials for LTCC Technology)
  • Article
  • Open Access
11 Citations
3,684 Views
15 Pages

Manufacturing of Aluminum Nano-Composites Reinforced with Nano-Copper and High Graphene Ratios Using Hot Pressing Technique

  • Hossam M. Yehia,
  • Reham A. H. Elmetwally,
  • Abdelhalim M. Elhabak,
  • Omayma A. El-Kady and
  • Ahmed Yehia Shash

15 November 2023

In this study, the nano-aluminum powder was reinforced with a hybrid of copper and graphene nanoplatelets (GNPs). The ratios of GNPs were 0 wt%, 0.4 wt%, 0.6 wt%, 1.2 wt% and 1.8 wt%. To avoid the reaction between aluminum and graphene and, consequen...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
11 Citations
5,030 Views
11 Pages

Effect of Fabric Electrode Surface Coating Medium on ECG Signal Quality under Dynamic and Static Conditions

  • Yazhou Zhang,
  • Jinli Zhou,
  • Hongying Yang,
  • Qingxia Liu and ,
  • Ming Wang,
  • Fan Xiong,
  • Dongyi Chen and
  • Lixin Du
  • + 3 authors+ 0 author

6 January 2023

This study intends to explore the influence of a fabric electrode skin interface filling medium on ECG signals under dynamic and static conditions, so as to be able to better monitor both stable and dynamic ECG signals. In this paper, cotton fabric e...

(This article belongs to the Special Issue Durability and Reliability of Functional Coatings in Energy Applications)