Polycarbonate (PC) is a highly versatile plastic material that is extensively utilized across various industries due to its superior properties, including high impact strength and heat resistance. However, its durability presents significant challeng...
Platinum (Pt), a precious metal extracted from minerals, plays an important role as a catalyst in energy conversion and storage devices. However, Pt is expensive and a limited resource, so it is crucial to maximize its utilization. In the electrocata...
Heat and mass transport properties of heterogeneous catalysts have significant effects on their overall performance in many industrial chemical reaction processes. In this work, a new catalyst micro-architecture consisting of a highly thermally condu...
The results of selected volatile organic compounds (benzene, n-hexane, isopropanol, and formic acid) catalytic oxidation are presented on Fe2O3 cenospheres in the fluidised bed reactor. The core–shell Fe2O3-cenosphere catalyst was developed by...
To substitute fossil resources, it is necessary to investigate the conversion of biomass into 1,2-propanediol (1,2-PDO) as a high-value-added chemical. The Pt/deAl-Beta@Mg(OH)2 catalytic system is designed to obtain a higher 1,2-PDO production yield....
This study explores the development of core–shell electrocatalysts for efficient glycerol oxidation in alkaline media. Carbon-supported M@Pt/C (M = Co, Ni, Sn) catalysts with a 1:1 atomic ratio of metal (M) to platinum (Pt) were synthesized usi...
Improving gasoline octane number while reducing aromatics is crucial for clean fuel production. Herein, a core–shell 2% Ni/ZSM-5-138@SiO2-1 bifunctional catalyst was constructed by coating ZSM-5 with an inert SiO2 shell followed by Ni impregnat...
Nanometer-sized materials have significantly different chemical and physical properties compared to bulk material. However, these properties do not only depend on the elemental composition but also on the structure, shape, size and arrangement. Hence...
The reverse water–gas shift (RWGS) reaction is a promising route for converting CO2 into CO, an important feedstock for synthetic fuels and chemicals. In this study, Zn–Co zeolitic imidazolate frameworks (ZIFs), including ZIF-8, ZIF-67, Z...
Proton exchange membrane fuel cells (PEMFCs) have achieved milestones in performance improvements and commercial launches. In the typical commercialized PEMFCs, the compressed air to cathode is usually supplied from ambient air, assuming that no cost...
Core-shell-type catalysts, which are synthesized by encapsulating the Cu-ZnO-Alumina type methanol synthesis catalyst (CZA) by silicotungstic acid (STA)-incorporated mesoporous alumina, were prepared following a hydrothermal route and tested in DME s...
Core-shell materials are promising functional materials for fundamental research and industrial application, as their properties can be adapted for specific applications. In particular, particles featuring iron or iron oxide as core material are rele...
Directly synthesising dimethyl ether (DME) from CO2 hydrogenation is a promising technique for efficiently utilising CO2 as a feedstock to produce clean fuel. The main challenges in this process are the low CO2 conversion and DME selectivity of the c...
Room-temperature liquid metal is a very ideal material for the design of catalytic materials. At low temperatures, the liquid metal enters the liquid state. It provides an opportunity to utilize the liquid phase in the catalysis, which is far superio...
In this study, 3%Pd/Al2O3, 3%Pt/Al2O3 and bimetallic (1%Pd + 2%Pt)/Al2O3 catalysts were examined in the total oxidation of methane in a temperature range of 150–400 °C. The evolution of the active component under the reaction conditions was...
The copper-based catalyst is considered to be the only catalyst for electrochemical carbon dioxide reduction to produce a variety of hydrocarbons, but its low selectivity and low current density to C2 products restrict its development. Herein, a core...
Proton exchange membrane (PEM) water electrolysis for hydrogen production has a high current density and overall efficiency, and is a very promising hydrogen production strategy. However, its application is limited by the high anodic overpotential fo...
The direct CO2 Fischer–Tropsch synthesis (CO2-FTS) process has been proven as one of the indispensable and effective routes in CO2 utilization and transformation. Herein, we present a core-shell structured Na/Fe@Co bimetallic catalyst to boost...
The metal-organic zeolite imidazolate framework-8 (ZIF-8) supported gold-silver bimetallic catalysts with a core-shell structure (Au@Ag/ZIF-8 and Ag@Au/ZIF-8) and cluster structure (AuAg/ZIF-8) were successfully prepared by the deposition-redispersio...
Developing ammonia selective-catalytic-reduction (NH3-SCR) catalysts that combine excellent activity with hydrothermal stability remains a major challenge in controlling NOx emissions from diesel engines. In this study, a Cu-SSZ-13@high-silica-SSZ-13...
In this study, unique core-shell aluminate spinel supports, Al@MAl2O4 (M = Zn, Mg, or Mn), were obtained by simple hydrothermal surface oxidation and were applied to the preparation of supported Ni catalysts for CO2 methanation. For comparison, CO me...
For the first time, herein is reported the use of a magnetic core-shell support for a C-scorpionate metallic complex. The prepared hybrid material, that consists on the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz, pyrazolyl) immobili...
Heterogeneous enantioselective hydrogenation is an ideal method for synthesizing important chiral compounds in pesticides and pharmaceuticals. Up to the present, supported noble-metal catalysts are most widely studied in heterogeneous enantioselectiv...
The effect of the ZrO2 loading was studied on spherical SiO2@ZrO2-CaO structures synthetized by a simple route that combines the Stöber and sol-gel methods. The texture of these materials was determined using SBET by N2 adsorption, where the inc...
Morphology control plays a major role in the design of solid catalysts. Since the heterogeneous Ziegler–Natta catalyst (ZNC) is based on the in situ synthesis of MgCl2 support in a top-down manner, the individual control of the exterior and the inter...
High-efficiency and low-cost multifunctional electrocatalysts for hydrogen evolution reaction (HERs), oxygen evolution reaction (OERs) and oxygen reduction reaction (ORRs) are important for the practical applications of regenerative fuel cells. The a...
Bimetallic nanostructured core-shell structures are commonly used as catalysts in a wide variety of reactions. We surmised that the addition of an additional metal would potentially allow catalytic tailoring with the possibility of an increase in act...
This paper demonstrates the results of constructive technological research on the development of a catalyst with a Ni/PSi@Pt structure. This catalyst eliminates the use of gold in the structure of μ-FC electrodes. This work uses the main technolog...
Fine control of morphology and exposed crystal facets of porous γ-Al2O3 is of significant importance in many application areas such as functional nanomaterials and heterogeneous catalysts. Herein, a morphology controlled in situ synthesis of Al...
Selective catalytic reduction of NO with methane (NO-CH4-SCR) in the presence of excess oxygen was investigated over the synthesized MnH-ZZs-n zeolite composite catalysts with FAU (as core) and BEA (as shell) topologies. XRD, SEM, and NH3-TPD technol...
The size-uniformed mesoporous Ag@SiO2 nanospheres’ catalysts were prepared in one-pot step via reducing AgNO3 by different types of aldehyde, which could control the size of Ag@SiO2 NPs and exhibit excellent catalytic activity for the hydrogena...
The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe3O4/TiO2/[FeCl2{κ3-HC(pz)3}] composite. This catalytic system, where the...
As the only renewable organic carbon source, abundant biomass has long been established and developed to mass-produce functionalized carbon materials. Herein, an extremely facile and green strategy was executed for the first time to in situ construct...
Fischer–Tropsch synthesis (FTS) in a 3D-printed stainless steel (SS) microchannel microreactor was investigated using Fe@SiO2 catalysts. The catalysts were prepared by two different techniques: one pot (OP) and autoclave (AC). The mesoporous st...
Seawater has attracted increasing attention as a promising resource for hydrogen production via electrolysis. However, multivalent ions present in seawater can reduce the efficiency of direct seawater electrolysis (DSWE) by forming inorganic precipit...
This review highlights recent research on the application of core–shell structured materials as catalysts in the oxidation of alcohols to value-added products, such as benzaldehyde, acetophenone, benzophenone, cinnamaldehyde, and vanillin, amon...
The preparation of heterogeneous Fenton catalysts with both adsorption and catalytic properties has become an effective strategy for the treatment of refractory organic wastewater. In this work, 4A-Fe@Cu bimetallic Fenton catalysts with a three-dimen...
Three novel magnetically-recoverable solid acid catalysts (hydrophobic catalysts Fe3O4@SiO2-Me&PrSO3H, Fe3O4@SiO2-Oc&PrSO3H and hydrophilic catalyst Fe3O4@SiO2-PrSO3H) were synthesized by introducing organic propylsulfonic acid and alkyl grou...
In this work, a core-shell-like sphere ruthenium catalyst, named as 5%Ru/γ-Al2O3@ASMA, has been successfully synthesized through impregnating the ruthenium nanoparticles (NPs) on the surface of the amino poly (styrene-co-maleic) polymer (ASMA)...
With the deterioration of the ecological environment and the depletion of fossil energy, fuel cells, representing a new generation of clean energy, have received widespread attention. This review summarized recent progress in noble metal-based core&n...
Combining chemical looping with a traditional fuel conversion process yields a promising technology for low-CO2-emission energy production. Bridged by the cyclic transformation of a looping material (CO2 carrier or oxygen carrier), a chemical looping...
Carbon-intensive industries must deem carbon capture, utilization, and storage initiatives to mitigate rising CO2 concentration by 2050. A 45% national reduction in CO2 emissions has been projected by government to realize net zero carbon in 2030. CO...
Large-size, superparamagnetic, and highly magnetic Fe3O4@PDA core–shell submicrosphere-supported nano-palladium catalysts were prepared in this study. Dopamine was encapsulated on the surface of Fe3O4 particles via self-polymerization and then...
Constructing a reliable and robust cobalt-based catalyst for hydrogen evolution via hydrolysis of sodium borohydride is appealing but challenging due to the deactivation caused by the metal leaching and re-oxidization of metallic cobalt. A unique cor...
The emphasis of this review is atomically monodisperse Aun nanoclusters catalysts (n = number of metal atom in cluster) that are ideally composed of an exact number of metal atoms. Aun which range in size from a dozen to a few hundred atoms are parti...
The chemical tolerance of ketoenamine covalent organic frameworks (COFs) is excellent; however, the tight crystal structure and low surface area limit their applications in the field of catalysis. In this work, a porous single-atom iron catalyst (FeS...
In this study, we prepared core-shell structured Ni@SiO2 catalysts using chemical precipitation and modified Stöber methods. The obtained Ni@SiO2 samples exhibited excellent catalysis performances, including high CO conversion of 99.0% and CH4 yield...
The oxidative dehydrogenation of alkanes is a prospective method for olefins production. CO2-assisted propane dehydrogenation over metal oxide catalysts provides an opportunity to increase propylene production with collateral CO2 utilization. We prep...
This study presents a sustainable and efficient method for fabricating core–shell structured palladium catalysts using a bacterial template and sol–gel synthesis. This synthesis aligns with green chemistry principles by minimizing waste a...
Improving the performance of oxygen reduction reaction (ORR) electrocatalysts is essential for the commercial efficacy of many renewable energy technologies, including low temperature polymer electrolyte fuel cells (PEFCs). Herein, we report highly a...
of 6