333 Results Found

TiO2-coated boron particles were prepared by a wet ball milling method, with the particle size distribution and average particle size being easily controlled by varying the milling operation time. Based on the results from X-ray photoelectron spectro...

Submicron particles are widely used in industrial applications due to their unique physical and mechanical properties that enhance the performance of composite materials. In particular, boron carbide particles are valued for their exceptional hardnes...

Titanium alloy is a major structural material with excellent high specific strength in aerospace applications. Cubic boron nitride (cBN) is a synthetic wear-resistant material with high hardness, similar to that of diamond, that is used in mechanical...

Metal-based nanofillers are used as disperssants to enhance thermal conductivity for a minimal fuel requirement to extract maximum energy. To achieve this, metal-based nanofillers must be suspended uniformly into jet fuel so that desired propulsive c...

In this study, boron powder with different particle sizes was purified by both chemical and heat treatment methods. The reduction in the particle size can improve the chemical purification with no effort on the heat treatment. The superconducting pro...

To improve the oxidation resistance of diamond, chromium boron carbide (Cr–B–C) coatings were synthesized through high temperature solid state synthesis and molten salt method on diamond particles in this paper. After holding the raw mate...

This work presents a study on the additive manufacturing of functionally graded metal-ceramic materials based on Ti64 with boron fibers and particles. For the first time, the phase composition of the obtained composite was investigated using synchrot...

Boron (B) neutron capture therapy (BNCT) is a novel non-invasive targeted cancer therapy based on the nuclear capture reaction 10B (n, alpha) 7Li that enables the death of cancer cells without damaging neighboring normal cells. However, the developme...

Compared to the recycling process by remelting, hot extrusion significantly reduces the energy consumption and CO2 emission and ensures good mechanical and microstructural properties. This study investigates the effects of reinforcing aluminium AA606...

Microscopic high-speed imaging is used to experimentally measure the velocity and size of droplets of gelled RP-1 based fuels with a solid particle additive. The gels are atomized using an air atomizing nozzle. The droplet diameter and velocity at a...

In this study, the high temperature erosion mechanisms and damage characteristics of a boronized coating have been systematically studied by employing an improved high-temperature accelerated erosion test bench and impact contact theory analyses. Wit...

In this work, the influences of alumina (Al2O3) particle size and loading concentration on the properties of injection molded polycarbonate (PC)/boron nitride (BN)/Al2O3 composites were systematically studied. Results indicated that both in-plane and...

In this study, a nickel-tungsten/amorphous boron composite coating (Ni-W/B) was successfully deposited on carbon steel using the electrodeposition method. Electrodeposition was performed by dispersing varying quantities of amorphous boron (0, 0.5, 1,...

The synergistic effect between different fillers plays a crucial role in determining the performance of composites. In this work, spherical boron nitride (BN) and flaky BN are used as hybrid fillers to improve the thermal conductivity (TC) of high-de...

BNCT is a non-invasive cancer therapy that allows for cancer cell death without harming adjacent cells. However, the application is limited, owing to the challenges of working with clinically approved boron (B) compounds and drug delivery systems (DD...

Nuclear reactions between protons and boron-11 nuclei (p–B fusion) that were used to yield energetic α-particles were initiated in a plasma that was generated by the interaction between a PW-class laser operating at relativistic intensiti...

The paper presents the results of research on composite Ni-B coatings with embedded particles of boron produced by a chemical reduction method and their influence on the mechanical, tribological, and corrosion properties of produced materials. Boron...

In this paper, we discuss the role of particle therapy—a novel radiation therapy (RT) that has shown rapid progress and widespread use in recent years—in multidisciplinary treatment. Three types of particle therapies are currently used for cancer tre...

Raw material is one of the most decisive factors for the quality of sintered boron carbide (B4C) products, in the past, there were relatively successful efforts for the synthesis of B4C powders via carbothermal reduction approaches. To prepare high-q...

In this work, gamma-ray shielding features of crosslinked polystyrene-b-polyethyleneglycol block copolymers (PS-b-PEG) blended with nanostructured selenium dioxide (SeO2) and boron nitride (BN) particles were studied. This research details several ra...

This study explores the role of porosity in the impact deposition of a ceramic-reinforced metal-matrix (i.e., Al/B4C) composite coating fabricated via cold spraying. The Johnson–Holmquist–Beissel constitutive law and the modified Gurson&n...

Protontherapy (PT) is a fast-growing cancer therapy modality thanks to much-improved normal tissue sparing granted by the charged particles’ inverted dose-depth profile. Protons, however, exhibit a low biological effectiveness at clinically rel...

An overexpression of sialic acid is an indicator of metastatic cancer, and selective detection of sialic acid shows potential for cancer diagnosis. Boronic acid is a promising candidate for this purpose because of its ability to specifically bind to...

In this study, boron carbide powders consisting mainly of nano/micro fibers or polyhedral-equiaxed particles were synthesized via the sol–gel technique, and the influence of particle morphology on electrochemical performance of boron carbide el...

Boron Neutron-Capture Therapy (BNCT) is a form of radiation therapy that relies on the highly localized and enhanced biological effects of the 10B neutron capture (BNC) reaction products to selectively kill cancer cells. The efficacy of BNCT is, ther...

Unusual optical anisotropy was experimentally observed in hexagonal boron nitride thin films produced from bulk boron nitride via ultrasonication. Both the linear and circular polarisation demonstrated a well-defined single axis of anisotropy over a...

The reinforcement of aluminum alloys with particles leads to the enhancement of their mechanical properties at room temperature. However, the creep behavior at elevated temperatures is often negatively influenced. This raises the question of how it i...

Boron removal was evaluated in the present work by using calcium alginate beads (CA) and a novel composite based on alginate–alumina (CAAl) as sorbents in a batch system. The effects of different parameters such as pH, temperature, contact tim...

To address the problems of the reduced evaporation rate and increased ignition time of kerosene droplets at sub-atmospheric pressures and high temperatures, boron and ethanol/water were selected as additives to be blended with RP-3 kerosene, respecti...

We report a physiologically stable and cytocompatible glucose-responsive nonviral gene delivery system made up of boronate functionalized polymeric material. Herein, we utilize boronate cis-diol interactions to develop a glucose-responsive submicron...

Polycrystalline cBN/copper composite abrasive particles were prepared by an electroless powder coating process. Ti metallization and tin/silver metallization techniques were used to improve the coating process by depositing an autocatalytic metallic...

For the thermal management of high watt density circuit layers, it is common to use a filled epoxy system to provide an electrically insulating but thermally conducting bond to a metal substrate. An epoxy-thiol system filled with boron nitride (BN),...

In this work, we investigate a novel approach to prepare high-performance alpha-particle solid sources fabricated on diamond thin support layers, offering the properties of diamond such as a low-Z material with corrosion and mechanical hardness. As-p...

This study aimed to assess and compare the shielding performance of boron-containing materials for neutrons generated in proton therapy and used in boron neutron capture therapy (BNCT). Five composites, including AlB2, Al-B4C, Al-TiB2, Al-BN, and Al-...

A novel high-temperature-resistant W-B4C-poly(4-methyl-1-pentene) (PMP) composite shielding material against neutron and gamma rays was developed and fabricated. Firstly, utilizing the 235U-induced fission spectrum as the source term, the composition...

Background: Ferrabis(dicarbollide) ([o-FESAN]−) in combination with proton–boron fusion therapy (PBFT) or boron neutron capture therapy (BNCT) are promising alternative radiation modalities for the treatment of breast cancer. The aim of t...

A compact accelerator-based neutron source has been proposed and created at the Budker Institute of Nuclear Physics in Novosibirsk, Russia. An original design tandem accelerator is used to provide a proton beam. The proton beam energy can be varied w...

A compact accelerator-based neutron source has been proposed and created at the Budker Institute of Nuclear Physics in Novosibirsk, Russia. An original design tandem accelerator is used to provide a proton beam. The neutron flux is generated as a res...

Hexagonal boron nitride and silicone rubber (h-BN/SR) composites were prepared by the mechanical stirring method, and their crystal morphology, chemical structure, thermal properties, and compression stress–strain performance were investigated. The e...

In this work, PDA@BN-TiO2 nanohybrid particles were incorporated chemically into a zinc-phosphating solution to form a robust, low-temperature phosphate-silane coating on Q235 steel specimens. The morphology and surface modification of the coating wa...

This paper explores the role of microdosimetry in boron neutron capture therapy (BNCT), a cancer treatment involving the selective accumulation of boron-containing compounds in cancer cells, followed by neutron irradiation. Neutron interactions with...

Hexagonal boron nitride, as a layered material with a graphite-like structure, exhibits good mechanical, lubricating and oxidation resistance properties, and is thus expected to become one of the top choices for green lubricating oil additives. Howev...

The release of boron (B) into the environment as a result of anthropogenic activity modifies sustainable natural conditions, thus affecting ecosystems. To meet water quality regulations, commercial and natural boron adsorbents are available to reduce...

The primary aim of this study was to investigate the boron leaching process from alkali-activated ludwigite ore. Initially, the ore underwent activation through roasting at 1050 °C for 60 min with 20% sodium carbonate. Subsequently, the study exa...

Iron powders and Fe/graphene oxide and Fe/boron nitride composites were synthesized by means of a polyol synthesis method. The effect of NaOH/Fe and ascorbic acid/Fe ratios on the characteristics of synthesized products were evaluated. The samples we...

Copper has high electrical and thermal conductivity, which is frequently employed in structural and functional materials. In this research, powder metallurgy was used to incorporate boron nanosheets into metal matrix composites to create boron disper...

The results of direct synthesis of composite powder based on boron nitride (BN) are considered. Concentrated light heating of the initial boron powder was carried out in a xenon high-flux optical furnace in a nitrogen flow. Formation of particles of...

Ni-W/boron composite coatings are deposited from an ammonia citrate bath with a boron particle suspension. The effect of the boron incorporation into the Ni-W alloy coating and subsequent heat treatment of the deposits on the microstructure and prope...

Boron neutron capture therapy (BNCT) is a binary cancer treatment that involves the irradiation of 10B-containing tumors with low-energy neutrons (thermal or epithermal). The alpha particles and recoiling Li nuclei that are produced in the 10B-captur...

This work focuses on the study of the microstructure, hardening, and stiffening effect caused by the secondary phases formed in titanium matrices. These secondary phases originated from reactions between the matrix and boron particles added in the st...