Skip to Content
You are currently on the new version of our website. Access the old version .
CrystalsCrystals
  • Article
  • Open Access

17 July 2023

11 Pages

The Use of Boron Fibers and Particles for Creating Functionally Graded Material Based on Ti64 Using the Laser Additive Manufacturing Method

,
and
Khristianovich Institute of Theoretical and Applied Mechanics SB RAS, 4/1 Institutskaya Str., Novosibirsk 630090, Russia
*
Author to whom correspondence should be addressed.

Abstract

This work presents a study on the additive manufacturing of functionally graded metal-ceramic materials based on Ti64 with boron fibers and particles. For the first time, the phase composition of the obtained composite was investigated using synchrotron radiation. It was shown that during laser exposure and in situ synthesis, boron dissolves in the titanium matrix, forming secondary compounds such as TiB and TiB2. An increase in the microhardness of the formed material compared to the titanium alloy was established. High-speed impact tests on the Ti64-B samples were conducted using an electrodynamic mass accelerator. It was shown that the use of boron fibers in the metallic matrix reduces the depth of the crater created during impact testing by 40% compared to the Ti64 reinforcement-free coating.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.