Skip to Content

604 Results Found

  • Article
  • Open Access
1,818 Views
16 Pages

Optimizing the Strength and Toughness of V/Mo-Modified 0.22C–5.24Mn Steel by Short-Time Partial Austenitization Process

  • Haoqing Zheng,
  • Gang Liu,
  • Shuai Tong,
  • Guanqiao Su and ,
  • Xiaokai Liang and
  • Xinjun Sun
  • + 1 author+ 0 author

31 January 2024

In order to obtain the good match between yield strength and low-temperature toughness, the short-time partial austenitization (SPA) process was employed for V/Mo-bearing 0.22C–5.24Mn steel. The initial microstructure after intercritical temper...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1 Citations
603 Views
32 Pages

23 June 2026

High-temperature structural components are susceptible to creep deformation, which can ultimately lead to failure. In this work, an AI-based framework was developed capable of predicting the creep time of 316 austenitic stainless steel. Here, creep t...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
17 Citations
7,293 Views
14 Pages

29 December 2015

The austenitization kinetics of SA508 Gr.3 steel during heating was studied using the isoconversional method combined with continuous thermal dilatometric tests for the first time. The model-free austenitization kinetics was built and the effective a...

  • Article
  • Open Access
14 Citations
4,290 Views
11 Pages

4 June 2019

In this work, the effects on dry wear behavior of cold ring rolling (CRR) of GCr15 bearing steel, after quenching and tempering (QT) heat treatment are investigated. The effects on steel microstructures and wear mechanisms of CRR with different auste...

  • Article
  • Open Access
9 Citations
4,145 Views
13 Pages

30 March 2022

Austenitic stainless steel is a widely used material in the industry, and the welding technique enables stainless steel components to have different shapes for different applications. Any flaws in the weld will degrade the performance of the austenit...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
13 Citations
3,535 Views
22 Pages

Influence of the Chemical Composition of the Used Powder on the Fatigue Behavior of Additively Manufactured Materials

  • Bastian Blinn,
  • Florian Krebs,
  • Maximilian Ley,
  • Christopher Gläßner and ,
  • Marek Smaga,
  • Jan C. Aurich,
  • Roman Teutsch and
  • Tilmann Beck
  • + 3 authors+ 0 author

29 November 2019

To exploit the whole potential of Additive Manufacturing (AM), a sound knowledge about the mechanical and especially cyclic properties of AM materials as well as their dependency on the process parameters is indispensable. In the presented work, the...

(This article belongs to the Special Issue Additive Manufacturing of Metals with Lasers)
  • Article
  • Open Access
9 Citations
3,607 Views
16 Pages

25 March 2022

A novel multi-step heat treatment process was performed for 0.2C–5Mn steel, and the effect of intercritical annealing (IA) durations on the microstructure evolution and mechanical properties was studied. The results showed that the content of p...

(This article belongs to the Special Issue Advanced Structural Steels and Alloys)
  • Article
  • Open Access
19 Citations
6,527 Views
17 Pages

29 November 2019

Interrupted and continuous hot compression tests were performed for eutectoid steel over the temperature range of 850 to 1050 °C and while using strain rates of 0.001, 0.01, 0.1, and 1 s−1. The interrupted tests were carried out to characte...

(This article belongs to the Special Issue Static and Dynamic Recrystallization, and Phase Transformation in Metallic Materials)
  • Article
  • Open Access
35 Citations
5,652 Views
17 Pages

4 November 2018

Effects of isothermal holding time and temperature on the stability of retained austenite in medium manganese bainitic steels with and without Nb microaddition were investigated. The amount of retained austenite for various variants of thermomechanic...

(This article belongs to the Special Issue Recent Trends in Advanced High-Strength Steels)
  • Article
  • Open Access
21 Citations
5,511 Views
11 Pages

Structural Characterization of Ion Nitrided 316L Austenitic Stainless Steel: Influence of Treatment Temperature and Time

  • Ozkan Gokcekaya,
  • Celaletdin Ergun,
  • Turgut Gulmez,
  • Takayoshi Nakano and
  • Safak Yilmaz

10 February 2022

The ion nitriding behavior of AISI 316L austenite stainless steel was investigated at different nitriding times (2 h, 4 h, and 9 h) and temperatures (450 °C, 500 °C, and 550 °C). The structural characterization has been assessed by severa...

(This article belongs to the Special Issue Surface Engineering of Metals and Alloys)
  • Article
  • Open Access
22 Citations
12,982 Views
19 Pages

Mechanical Properties, Short Time Creep, and Fatigue of an Austenitic Steel

  • Josip Brnic,
  • Goran Turkalj,
  • Marko Canadija,
  • Domagoj Lanc and ,
  • Sanjin Krscanski,
  • Marino Brcic,
  • Qiang Li and
  • Jitai Niu
  • + 3 authors+ 0 author

20 April 2016

The correct choice of a material in the process of structural design is the most important task. This study deals with determining and analyzing the mechanical properties of the material, and the material resistance to short-time creep and fatigue. T...

  • Feature Paper
  • Article
  • Open Access
1 Citations
3,938 Views
15 Pages

Through-Thickness Microstructure Characterization in a Centrifugally Cast Austenitic Stainless Steel Nuclear Reactor Primary Loop Pipe Using Time-of-Flight Neutron Diffraction

  • Matthew M. Schmitt,
  • Daniel J. Savage,
  • James J. Wall,
  • John D. Yeager and ,
  • Chanho Lee and
  • Sven C. Vogel
  • + 1 author+ 0 author

The US code of Federal Regulations mandates regular inspection of centrifugally cast austenitic stainless steel pipe, commonly used in primary cooling loops in light-water nuclear power plants. These pipes typically have a wall thickness of ~8 cm. Un...

(This article belongs to the Special Issue Analysis of Strain, Stress and Texture with Quantum Beams)
  • Article
  • Open Access
20 Citations
5,795 Views
13 Pages

Real-Time Investigation of Recovery, Recrystallization and Austenite Transformation during Annealing of a Cold-Rolled Steel Using High Energy X-ray Diffraction (HEXRD)

  • Marc Moreno,
  • Julien Teixeira,
  • Guillaume Geandier,
  • Jean-Christophe Hell and ,
  • Frédéric Bonnet,
  • Mathieu Salib and
  • Sébastien Y.P. Allain
  • + 2 authors+ 0 author

21 December 2018

The annealing process of cold-rolled ferrite/pearlite steel involves numerous metallurgical mechanisms as recovery/recrystallization of deformed phases, ripening of carbide microstructure, and austenite transformation in the intercritical domain. The...

  • Feature Paper
  • Article
  • Open Access
9 Citations
3,381 Views
21 Pages

A Numerical and Experimental Assessment of the Small Punch Creep Test for 316L(N) Stainless Steels

  • Karl-Fredrik Nilsson,
  • Daniele Baraldi,
  • Stefan Holmström and
  • Igor Simonovski

11 October 2021

This paper presents a finite element analysis of the small punch creep test for 316L(N), which is compared with experimental data for 650 and 700 °C. Special emphasis is placed on (i) assessing the influence of friction and (ii) comparing two differe...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
9 Citations
2,968 Views
13 Pages

29 July 2020

The effects of heat treatment on the microstructure evolution was studied in regards to austenite nucleation and grain growth. It was found that the austenite nucleation and matrix recrystallization kinetics of samples annealed at 675 °C for diff...

(This article belongs to the Special Issue Formation and Behavior of Metastable Austenite in Advanced High Strength Steels)
  • Article
  • Open Access
2 Citations
2,202 Views
18 Pages

24 March 2024

Since the formation of reversed austenite during critical tempering treatment is an important factor affecting the mechanical properties of 13Cr4Ni martensitic stainless steel, a detailed study of the content and morphology of reversed austenite in h...

(This article belongs to the Special Issue Advances in Steel Materials: Structure, Processing, and Properties)
  • Article
  • Open Access
32 Citations
6,612 Views
13 Pages

Microstructure Evolution and Orientation Relationship of Reverted Austenite in 13Cr Supermartensitic Stainless Steel During the Tempering Process

  • Yiwei Zhang,
  • Chi Zhang,
  • Xiaomin Yuan,
  • Diankai Li and ,
  • Yuande Yin and
  • Shengzhi Li
  • + 1 author+ 0 author

15 February 2019

The transformation mechanism of reverted austenite and the amount of reverted austenite during the tempering process in supermartensitic stainless steel have been investigated by X-ray diffraction (XRD), electron backscattered diffraction (EBSD), and...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Steels)
  • Article
  • Open Access
2 Citations
2,881 Views
11 Pages

2 June 2020

In the present study, quenching and partitioning (Q & P) treatment of a medium-carbon silicon-rich steel was processed by a dilatometer. The volume fraction of the retained austenite at different partitioning times was determined by X-ray diffrac...

  • Article
  • Open Access
6 Citations
2,183 Views
13 Pages

Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel

  • Jun Wang,
  • Man Liu,
  • Lifan Wang,
  • Ping He and ,
  • Haijiang Hu and
  • Guang Xu
  • + 1 author+ 0 author

1 July 2024

Previous studies on the austenite grain growth were mostly based on a fixed temperature, and the relationship between the austenite grain and austenitizing parameters was fitted according to the results. However, there is a lack of quantitative resea...

(This article belongs to the Special Issue Microstructure, Mechanical Properties and Wear Performance of High-Strength Steels)
  • Article
  • Open Access
15 Citations
4,111 Views
12 Pages

Evolution of Phase Transition and Mechanical Properties of Ultra-High Strength Hot-Stamped Steel During Quenching Process

  • Shuang Liu,
  • Mujun Long,
  • Songyuan Ai,
  • Yan Zhao and ,
  • Dengfu Chen,
  • Yi Feng,
  • Huamei Duan and
  • Mingtu Ma
  • + 3 authors+ 0 author

16 January 2020

Hot stamping process is widely used in the manufacture of the high strength automotive steel, mainly including the stamping and quenching process of the hot-formed steel. In the hot stamping process, the steel is heated above the critical austenitizi...

(This article belongs to the Special Issue Forming and Heat Treatment of Modern Metallic Materials)
  • Article
  • Open Access
11 Citations
3,327 Views
16 Pages

7 May 2023

HSLA steel is widely used in various applications for its excellent mechanical properties. The evolution of austenite transformation and growth has been systematically studied in HSLA steel Q960 during the heating process. A thermal expansion instrum...

(This article belongs to the Special Issue Heat Treatment of Metallic Materials in Modern Industry)
  • Article
  • Open Access
4 Citations
3,071 Views
13 Pages

2 February 2021

The thermo-mechanical control processing of Nb-Ti micro-alloyed steel by induction heating in the endless strip production (ESP) line was analyzed to better understand the microstructural evolution and Nb precipitation and dissolution behavior in aus...

(This article belongs to the Special Issue Inclusion/Precipitate Engineering in Steels)
  • Article
  • Open Access
6 Citations
2,701 Views
11 Pages

17 October 2024

The super duplex stainless steel (SDSS) powder SAF2507 was deposited using directed energy deposition. In the as-built state, the microstructure consists of a nearly balanced ferrite–austenite ratio, with an austenite content of 47 vol.%, in co...

(This article belongs to the Special Issue Modern Technologies in the Manufacturing of Metal Matrix Composites)
  • Article
  • Open Access
9 Citations
4,288 Views
9 Pages

18 September 2019

On the basis of the two-dimensional cellular automaton model, a three-dimensional cellular automaton model of austenitizing process was established. By considering the orientation of pearlite layer and the direction of austenite grain growth, the vel...

  • Article
  • Open Access
55 Citations
11,898 Views
13 Pages

Effects of Austenitizing Conditions on the Microstructure of AISI M42 High-Speed Steel

  • Yiwa Luo,
  • Hanjie Guo,
  • Xiaolin Sun,
  • Mingtao Mao and
  • Jing Guo

18 January 2017

The influences of austenitizing conditions on the microstructure of AISI M42 high-speed steel were investigated through thermodynamic calculation, microstructural analysis, and in-situ observation by a confocal scanning laser microscope (CSLM). Resul...

(This article belongs to the Special Issue Alloy Steels)
  • Article
  • Open Access
3 Citations
3,663 Views
11 Pages

11 April 2020

Under standard conditions, DSS (duplex stainless steel) features differing amounts of ferrite and austenite, essentially depending on the thermal treatment performed. This study is focused on the ultrasonic tests (UTs) response of DSS 2205, as a func...

(This article belongs to the Special Issue Heat Treatment of Iron- and Aluminum-Based Alloys)
  • Article
  • Open Access
47 Citations
6,309 Views
13 Pages

Effects of Q&P Processing Conditions on Austenite Carbon Enrichment Studied by In Situ High-Energy X-ray Diffraction Experiments

  • Sébastien Yves Pierre Allain,
  • Guillaume Geandier,
  • Jean-Christophe Hell,
  • Michel Soler and ,
  • Frédéric Danoix and
  • Mohamed Gouné
  • + 1 author+ 0 author

22 June 2017

We report the first ultra-fast time-resolved quantitative information on the quenching and partitioning process of conventional high-strength steel by an in situ high-energy X-ray diffraction (HEXRD) experiment. The time and temperature evolutions of...

(This article belongs to the Special Issue Bainite and Martensite: Developments and Challenges)
  • Article
  • Open Access
16 Citations
3,235 Views
15 Pages

Evolution of Microstructures and Mechanical Properties of Nb-V Alloyed Ultra-High Strength Hot Stamping Steel in Austenitizing Process

  • Shuang Liu,
  • Songyuan Ai,
  • Mujun Long,
  • Yi Feng and ,
  • Jingjun Zhao,
  • Yan Zhao,
  • Xiang Gao,
  • Dengfu Chen and
  • Mingtu Ma
  • + 4 authors+ 0 author

18 November 2022

Clarifying the influence of Nb and V microalloying on the ultra-high strength hot stamping steel (UHSHSS) and exploring appropriate process parameters are the basis for effectively regulating properties of the final product. In this study, the effect...

(This article belongs to the Special Issue Mechanical Properties and Microstructural Features of Alloy/Steel)
  • Article
  • Open Access
3 Citations
2,211 Views
19 Pages

Study on the Austenite Grain Growth Behavior of Fe-Mn-Al-C Low-Density Steel Containing Niobium

  • Litu Huo,
  • Tao Ma,
  • Weimin Gao,
  • Yungang Li and ,
  • Haichao Zhang and
  • Jianxin Gao
  • + 1 author+ 0 author

23 May 2025

To explore the impact of niobium (Nb) addition on the austenitization behavior of Fe-Mn-Al-C lightweight steels, the effects were examined through Thermo-Calc thermodynamic simulations, optical microscopy, transmission electron microscopy (TEM), and...

  • Article
  • Open Access
7 Citations
2,861 Views
16 Pages

Ultra-Fine Bainite in Medium-Carbon High-Silicon Bainitic Steel

  • Xinpan Yu,
  • Yong Wang,
  • Huibin Wu and
  • Na Gong

9 May 2024

The effects of austenitizing and austempering temperatures on the bainite transformation kinetics and the microstructural and mechanical properties of a medium-carbon high-silicon ultra-fine bainitic steel were investigated via dilatometric measureme...

(This article belongs to the Special Issue Metalworking Processes: Theoretical and Experimental Study)
  • Review
  • Open Access
14 Citations
6,117 Views
21 Pages

18 November 2019

During the welding process of B containing 9% Cr martensitic heat resistant steel (9Cr-B steel), austenite memory effect (referred to that the prior austenite grains in the heat affected zone (HAZ) after welding inherit the shape and size of prior au...

(This article belongs to the Special Issue Microstructure and Properties of Metallic Heat-Affected Zones)
  • Article
  • Open Access
22 Citations
3,825 Views
11 Pages

1 April 2019

Inclusion-induced acicular ferrite (AF) nucleation has been used for microstructure refinement in steel. Austenitization conditions have a significant influence on AF nucleation ability. In this paper, the effects of austenitization temperature and h...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
16 Citations
6,285 Views
12 Pages

11 September 2018

Real-time in situ neutron diffraction was used to characterize the crystal structure evolution in a transformation-induced plasticity (TRIP) sheet steel during annealing up to 1000 °C and then cooling to 60 °C. Based on the results of full-pa...

(This article belongs to the Special Issue Neutron Diffractometers for Single Crystals and Powders)
  • Article
  • Open Access
25 Citations
5,584 Views
20 Pages

18 February 2022

A prototype medium-Mn TRIP steel (0.2 C–6 Mn–1.7 Si–0.4 Al–0.5 Cr (wt %)) with a cold-rolled tempered martensite (CR) and martensitic (M) starting microstructures was subjected to continuous galvanizing line (CGL) compatible h...

(This article belongs to the Special Issue Recent Developments in Medium and High Manganese Steels)
  • Article
  • Open Access
9 Citations
6,538 Views
18 Pages

Control of Upstream Austenite Grain Coarsening during the Thin-Slab Cast Direct-Rolling (TSCDR) Process

  • Tihe Zhou,
  • Ronald J. O’Malley,
  • Hatem S. Zurob,
  • Mani Subramanian and ,
  • Sang-Hyun Cho and
  • Peng Zhang
  • + 1 author+ 0 author

1 February 2019

Thin-slab cast direct-rolling (TSCDR) has become a major process for flat-rolled production. However, the elimination of slab reheating and limited number of thermomechanical deformation passes leave fewer opportunities for austenite grain refinement...

(This article belongs to the Special Issue Continuous Casting)
  • Article
  • Open Access
26 Citations
3,499 Views
12 Pages

27 April 2022

The present study investigates the morphological evolution of carbonitrides and the effect of these precipitates on grain boundary pinning during pseudo-carburizing a Nb-Ti-Al microalloyed steel. The result indicated that three kinds of complex preci...

(This article belongs to the Special Issue Advanced Steel Design: Casting, Forming and Heat Treatment)
  • Article
  • Open Access
3 Citations
4,385 Views
15 Pages

Behavior of Retained Austenite and Carbide Phases in AISI 440C Martensitic Stainless Steel under Cavitation

  • Silvio Francisco Brunatto,
  • Rodrigo Perito Cardoso and
  • Leonardo Luis Santos

17 August 2024

In this work emphasis was given to determine the evolution of the retained austenite phase fraction via X-ray diffractometry technique in the as-hardened AISI 440C martensitic stainless steel surface subjected to cavitation for increasing test times....

  • Article
  • Open Access
7 Citations
4,856 Views
11 Pages

Effect of Corrosion Characteristics on Long-Term Aging of Austenitic 304 Steel

  • Chaeeul Huh,
  • Seongbin An,
  • Minsuk Kim and
  • Chungseok Kim

17 December 2019

The objective of this study is to investigate the effect of long-term aging on electrochemical corrosion characteristics of austenitic AISI 304 steel. AISI 304 steel was subjected to aging treatment for an extended period at 700 °C up to a maximu...

(This article belongs to the Special Issue Selected Papers from the ICMR 2019)
  • Article
  • Open Access
1,656 Views
15 Pages

Austenite Grain Growth Behavior and Dynamic Model of ADB790E Hydropower Steel

  • Yuxuan Liu,
  • Hongmei Zhang,
  • Zhongxiang Yu and
  • Zhengyi Jiang

17 September 2025

The growth behavior of austenite grains in ADB790E hydropower steel under the synergistic effects of heating temperature and holding time was studied using in situ quenching and an in situ high-temperature confocal laser scanning microscope (HT-CLSM)...

  • Article
  • Open Access
8 Citations
3,006 Views
25 Pages

1 May 2021

The partitioning and diffusion of solute elements in hot rolling and the effect of the partitioning and diffusion on the ferrite-bainite banding formation after hot rolling in the 20CrMnTi steel were experimentally examined by EPMA (electron probe mi...

  • Article
  • Open Access
8 Citations
3,710 Views
14 Pages

18 December 2020

During the casting cooling process or the forging process, austenitic stainless steel will remain at around 800 °C for some time. During this period, precipitate particle behaviors in austenitic stainless steel (containing ferrite) will cause a r...

(This article belongs to the Special Issue Inclusion/Precipitate Engineering in Steels)
  • Article
  • Open Access
21 Citations
4,297 Views
10 Pages

7 May 2019

With the aim of improving erosive wear resistance in hypoeutectic white cast irons with 18% Cr and 2% Mo, several samples of this grade were subjected to different heat treatments at 1000 °C to destabilize the austenite. The dwell times at this t...

  • Article
  • Open Access
7 Citations
4,263 Views
13 Pages

Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel

  • Jiří Pechoušek,
  • Ernö Kuzmann,
  • René Vondrášek,
  • Anna Olina and ,
  • Vlastimil Vrba,
  • Lukáš Kouřil,
  • Tomáš Ingr,
  • Petr Král and
  • Miroslav Mashlan
  • + 4 authors+ 0 author

7 January 2022

Low-alloy 42CrMo4 steels were studied by 57Fe Mössbauer spectroscopy (MS), X-ray diffractometry (XRD), and Energy Dispersive X-ray Spectroscopy (EDS) measurements. The investigations were performed on metallographic samples, which were subjected...

(This article belongs to the Special Issue Mössbauer Analysis Applied to Metals, Alloys and Compounds)
  • Article
  • Open Access
30 Citations
4,461 Views
14 Pages

27 April 2021

Successful prediction of the relevant mechanical properties of steels is of great importance to materials engineering. The aim of this research is to investigate the possibility of reducing the complexity of artificial neural networks-based predictio...

(This article belongs to the Special Issue Application of Artificial Neural Networks in Studies of Steels and Alloys)
  • Article
  • Open Access
11 Citations
2,919 Views
14 Pages

17 April 2024

The paper deals with the effect of the morphology characteristics, grain size, and the volume fraction of AlN- and NbC-precipitated particles on the prior austenite grain growth behavior in the Al- and Nb-microalloying 20MnCr gear steel during pseudo...

(This article belongs to the Special Issue Microalloying in Ferrous and Non-ferrous Alloys)
  • Article
  • Open Access
9 Citations
4,343 Views
26 Pages

Characterization of a Medium Mn-Ni Steel Q&P Treated by a High Partitioning Temperature Cycle

  • Maribel Arribas,
  • Eider Del Molino,
  • Teresa Gutiérrez,
  • Artem Arlazarov and ,
  • David Martin,
  • Daniele De Caro,
  • Sudhindra Ayenampudi and
  • Maria J. Santofimia
  • + 3 authors+ 0 author

13 March 2022

In this work, a medium Mn-Ni steel was treated through Quenching and Partitioning (Q&P) with a partitioning temperature (PT) of 650 °C, which corresponded to the start of the austenite reverse transformation (ART) phenomenon. The influence of...

  • Article
  • Open Access
3 Citations
4,303 Views
16 Pages

15 January 2024

The 100CrMo7, commonly employed for bearings in rotating machinery, relies on precise heat treatment parameters to ensure an optimal microstructure and, in turn, mechanical properties. Typically, an austenitizing treatment, followed by rapid cooling...

(This article belongs to the Special Issue Heat Treatment of Metals)
  • Article
  • Open Access
18 Citations
3,846 Views
23 Pages

Phase Transition Kinetics in Austempered Ductile Iron (ADI) with Regard to Mo Content

  • Martin Landesberger,
  • Robert Koos,
  • Michael Hofmann,
  • Xiaohu Li and ,
  • Torben Boll,
  • Winfried Petry and
  • Wolfram Volk
  • + 2 authors+ 0 author

21 November 2020

The phase transformation to ausferrite during austempered ductile iron (ADI) heat treatment can be significantly influenced by the alloying element Mo. Utilizing neutron diffraction, the phase transformation from austenite to ausferrite was monitored...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
5 Citations
2,064 Views
21 Pages

Stability of Expanded Austenite During Annealing in Vacuum

  • Stephan Mändl,
  • Hyemin Oh,
  • Daniel Hristov and
  • Darina Manova

25 January 2025

In situ X-ray diffraction has been used to investigate the stability of expanded austenite during annealing in vacuum for the austenitic stainless steel 316Ti, the super-austenitic stainless steel 904L, and the duplex steel 318LN. Expanded austenite...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys (3rd Edition))
  • Article
  • Open Access
3,184 Views
26 Pages

27 January 2025

A modified carbide-free bainite (CFB) steel has been developed, building on existing alloys for compatibility with commercial continuous annealing lines (CALs), featuring a low austenitization temperature and short overaging time. The microstructural...

(This article belongs to the Special Issue Phase Transformation and Softening Mechanisms of Metals and Alloys during Thermomechanical Processing)

of 13