Skip to Content
You are currently on the new version of our website. Access the old version .

5,801 Results Found

  • Article
  • Open Access
10 Citations
2,954 Views
11 Pages

Influence of Wire Geometry on the Mechanical Behavior of the TiNi Design

  • Gulsharat Baigonakova,
  • Ekaterina Marchenko,
  • Marina Kovaleva and
  • Alexander Vorozhtsov

1 July 2022

The present article is aimed at studying the deformation behavior of TiNi wire and knitted metal TiNi mesh under uniaxial tension and revealing the role of wire geometry on their main mechanical characteristics and mechanisms of deformation behavior....

(This article belongs to the Special Issue Thermomechanical Treatment of Metals and Alloys)
  • Article
  • Open Access
12 Citations
3,357 Views
13 Pages

Structure and Mechanical Properties of Porous TiNi Alloys with Ag Nanoparticles

  • Ekaterina Marchenko,
  • Gulsharat Baigonakova,
  • Viktor Larikov,
  • Aleksandr Monogenov and
  • Yuri Yasenchuk

23 December 2022

The work studies the influence of the silver dopant (<0.5 at.%) on the structure and mechanical properties of porous TiNi alloys obtained by self-propagating high-temperature synthesis. These alloys are of high scientific and practical interest in...

(This article belongs to the Special Issue Nanoparticles for Energy, Sensing and Biomedical Applications)
  • Communication
  • Open Access
6 Citations
2,887 Views
9 Pages

30 November 2022

Titanium-nickel alloy is an attractive material due to its unique properties of shape memory effect, superior elasticity, and biocompatibility. Generally, Ti-Ni alloy powders are prepared from pure elemental powders of Ti and Ni as starting materials...

(This article belongs to the Special Issue Intermetallic Alloys: Preparation, Properties and Applications)
  • Article
  • Open Access
3 Citations
3,414 Views
13 Pages

Phase Transformation in TiNi Nano-Wafers for Nanomechanical Devices with Shape Memory Effect

  • Alexey Kartsev,
  • Peter V. Lega,
  • Andrey P. Orlov,
  • Alexander I. Pavlov and ,
  • Svetlana von Gratowski,
  • Victor V. Koledov and
  • Alexei S. Ilin
  • + 2 authors+ 0 author

28 March 2022

Recently, Ti-Ni based intermetallic alloys with shape memory effect (SME) have attracted much attention as promising functional materials for the development of record small nanomechanical tools, such as nanotweezers, for 3D manipulation of the real...

(This article belongs to the Section Nanofabrication and Nanomanufacturing)
  • Article
  • Open Access
14 Citations
3,036 Views
14 Pages

Preparation and Electron-Beam Surface Modification of Novel TiNi Material for Medical Applications

  • Sergey G. Anikeev,
  • Anastasiia V. Shabalina,
  • Sergei A. Kulinich,
  • Nadezhda V. Artyukhova and ,
  • Daria R. Korsakova,
  • Evgeny V. Yakovlev,
  • Vitaly A. Vlasov,
  • Oleg V. Kokorev and
  • Valentina N. Hodorenko
  • + 4 authors+ 0 author

12 May 2021

A new approach to fabricate TiNi surfaces combining the advantages of both monolithic and porous materials for implants is used in this work. New materials were obtained by depositing a porous TiNi powder onto monolithic TiNi plates followed by sinte...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
5 Citations
2,389 Views
7 Pages

16 June 2022

TiNi shape memory alloy (SMA) prepared by laser solid forming (LSF) has wide application prospect and research value. In this work, LSF-Ti49.2Ni50.8 alloy was tested by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and transmissio...

  • Article
  • Open Access
7 Citations
2,568 Views
20 Pages

Combined Porous-Monolithic TiNi Materials Surface-Modified with Electron Beam for New-Generation Rib Endoprostheses

  • Anastasiia V. Shabalina,
  • Sergey G. Anikeev,
  • Sergei A. Kulinich,
  • Nadezhda V. Artyukhova and ,
  • Vitaly A. Vlasov,
  • Maria I. Kaftaranova,
  • Valentina N. Hodorenko,
  • Evgeny V. Yakovlev,
  • Evgeny A. Pesterev and
  • Victor E. Gunther
  • + 11 authors+ 6 authors

TiNi alloys are very widely used materials in implant fabrication. When applied in rib replacement, they are required to be manufactured as combined porous-monolithic structures, ideally with a thin, porous part well-adhered to its monolithic substra...

(This article belongs to the Section Bone Biomaterials)
  • Article
  • Open Access
2 Citations
3,004 Views
15 Pages

Fusion of Ni Plating on CP-Titanium by Electron Beam Single-Track Scanning: Toward a New Approach for Fabricating TiNi Self-Healing Shape Memory Coating

  • Lei Wang,
  • Masayuki Okugawa,
  • Hirokazu Konishi,
  • Yuheng Liu and ,
  • Yuichiro Koizumi and
  • Takayoshi Nakano
  • + 1 author+ 0 author

3 August 2023

The limited wear resistance of commercially pure titanium (CP-Ti) hinders its use in abrasive and erosive environments, despite its good strength–weight ratio and corrosion resistance. This paper reports the first study proposing a novel method...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
12 Citations
2,892 Views
15 Pages

Corrosion Behavior of TiNi Alloy Fabricated by Selective Laser Melting in Simulated Saliva

  • Chenfan Jia,
  • Xinyu Wang,
  • Ming Hu,
  • Yucheng Su and ,
  • Shujun Li,
  • Xin Gai and
  • Liyuan Sheng
  • + 2 authors+ 0 author

15 June 2022

In this work, TiNi samples were prepared by Selective Laser Melting (SLM) technology, and the influence of microstructure, fluoride ion, and pH value on corrosion behavior in a saline environment was investigated and compared with TiNi alloy fabricat...

(This article belongs to the Section Bioactive Coatings and Biointerfaces)
  • Article
  • Open Access
10 Citations
2,403 Views
13 Pages

Friction and Wear Resistance of Nanostructured TiNi Shape Memory Alloy

  • Alexandr Dmitrievskiy,
  • Victor Komarov,
  • Roman Karelin,
  • Vladimir Andreev and
  • Vladimir Stolyarov

3 November 2024

TiNi shape memory alloys with a superelastic effect are widely used in tribological interfaces requiring high wear resistance. One of the common approaches to reducing the wear of various metals is the application of severe plastic deformation (SPD),...

  • Review
  • Open Access
61 Citations
8,226 Views
25 Pages

Biocompatibility and Clinical Application of Porous TiNi Alloys Made by Self-Propagating High-Temperature Synthesis (SHS)

  • Yuri Yasenchuk,
  • Ekaterina Marchenko,
  • Victor Gunther,
  • Andrey Radkevich and ,
  • Oleg Kokorev,
  • Sergey Gunther,
  • Gulsharat Baigonakova,
  • Valentina Hodorenko,
  • Timofey Chekalkin and
  • Aleksei Obrosov
  • + 7 authors+ 2 authors

28 July 2019

Porous TiNi alloys fabricated by self-propagating high-temperature synthesis (SHS) are biomaterials designed for medical application in substituting tissue lesions and they were clinically deployed more than 30 years ago. The SHS process, as a very f...

(This article belongs to the Special Issue Biomaterials and Implant Biocompatibility)
  • Article
  • Open Access
608 Views
15 Pages

Dynamic and Post-Deformation Static Aging as an Integrated Approach to Thermomechanical Processing of TiNi Shape Memory Alloys

  • Victor Komarov,
  • Vladimir Cherkasov,
  • Roman Karelin,
  • Weisi Cai and ,
  • Irina Khmelevskaya,
  • Vladimir Andreev,
  • Ulrich Prahl,
  • Vladimir Yusupov,
  • Chao Yang and
  • Sergey Prokoshkin
  • + 5 authors+ 0 author

The effect of thermomechanical processing (TMP) parameters on the structural-phase evolution and properties of Ni-enriched Ti–50.8 at.% Ni shape memory alloy was investigated. Compression deformation was performed at T = 300–500 °C, a...

(This article belongs to the Special Issue Advanced Additive Manufacturing of Functional and Structural Alloys)
  • Article
  • Open Access
4 Citations
3,172 Views
19 Pages

Nanostructured TiNi Wires for Textile Implants: Optimization of Drawing Process by Means of Mechano-Chemical Treatment

  • Nadezhda V. Artyukhova,
  • Anastasiia V. Shabalina,
  • Sergey G. Anikeev,
  • Helmut-Takahiro Uchida and
  • Sergei A. Kulinich

TiNi-based alloys are widely utilized in various engineering and medical applications. This study presents a newly developed and optimized technology for producing TiNi wires with a diameter of 40 μm utilizing a combined mechano-chemical treatment...

(This article belongs to the Section Manufacturing Technology)
  • Article
  • Open Access
16 Citations
5,341 Views
10 Pages

Understanding Interfacial Reactions in Ti–Ni Diffusion Couple

  • Amin Babaei-Dehkordi,
  • Mansour Soltanieh,
  • Mostafa Mirjalili,
  • Mohammadreza Asherloo and
  • Amir Mostafaei

11 March 2023

The diffusion phenomenon in the Ti–Ni binary system was investigated at a temperature of 1173 K. Microstructure and texture analysis revealed the formation of three stable intermetallic compounds, namely Ti2Ni, TiNi, and TiNi3, as well as two m...

(This article belongs to the Topic Phase Diagram, Phase Transition and Advanced Materials Design)
  • Article
  • Open Access
47 Citations
4,303 Views
15 Pages

Processing Characteristics of Micro Electrical Discharge Machining for Surface Modification of TiNi Shape Memory Alloys Using a TiC Powder Dielectric

  • Ziliang Zhu,
  • Dengji Guo,
  • Jiao Xu,
  • Jianjun Lin and ,
  • Jianguo Lei,
  • Bin Xu,
  • Xiaoyu Wu and
  • Xujin Wang
  • + 3 authors+ 0 author

20 November 2020

Titanium-nickel shape memory alloy (SMA) has good biomedical application value as an implant. Alloy corrosion will promote the release of toxic nickel ions and cause allergies and poisoning of cells and tissues. With this background, surface modifica...

(This article belongs to the Special Issue Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications)
  • Article
  • Open Access
5 Citations
3,302 Views
13 Pages

Experimental and Numerical Investigation of Mechanical and Thermal Effects in TiNi SMA during Transformation-Induced Creep Phenomena

  • Vladimir Dunić,
  • Elżbieta A. Pieczyska,
  • Zbigniew L. Kowalewski,
  • Ryosuke Matsui and
  • Radovan Slavković

16 March 2019

(1) The paper presents experimental and numerical results of the TiNi shape memory alloy (SMA) subjected to a modified program of force-controlled tensile loading. The time-dependent development of transformation strain under the constant-force condi...

  • Article
  • Open Access
7 Citations
2,615 Views
12 Pages

Investigation of the Effect of Copper Addition on Physical and Mechanical Properties of TiNi-Cu Porous Alloy

  • Maria Kaftaranova,
  • Valentina Hodorenko,
  • Sergey Anikeev,
  • Nadezhda Artyukhova and ,
  • Anastasiia V. Shabalina and
  • Victor Gunther
  • + 1 author+ 0 author

11 October 2022

This work is devoted to the physical and mechanical properties of porous alloys based on TiNi alloyed with different amounts of Cu additive. We show that by doping a porous TiNi alloy with copper instead of nickel, it is possible to obtain characteri...

(This article belongs to the Special Issue Thermomechanical Treatment of Metals and Alloys)
  • Article
  • Open Access
7 Citations
4,975 Views
11 Pages

Effect of Nonmetallic Inclusions on Fatigue Properties of Superelastic Ti-Ni Fine Wire

  • Fumiyoshi Yamashita,
  • Yasunori Ide,
  • Suguru Kato,
  • Kyosuke Ueda and ,
  • Takayuki Narushima,
  • Sumio Kise,
  • Kouji Ishikawa and
  • Minoru Nishida
  • + 3 authors+ 0 author

11 September 2019

This study investigated the effects of the types and length of nonmetallic inclusions on fatigue properties in rotating bending fatigue testing of Ti-Ni alloy fine wire. It was fabricated to include titanium carbides Ti(C,O) and titanium oxides Ti4Ni...

  • Article
  • Open Access
19 Citations
3,307 Views
9 Pages

26 March 2020

Ti, Ni, and Ti/Ni plasma immersion ion implantation is carried out on the AM60 magnesium alloy with a 6 × 1016 ions/cm2 fluence and energy of 35 keV. The corrosion and wear properties of the ion-implanted samples are determined systematically b...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
8 Citations
3,547 Views
12 Pages

Microstructure and Mechanical Properties of Co-Deposited Ti-Ni Films Prepared by Magnetron Sputtering

  • Xiaolin Zhang,
  • Yi Ding,
  • Honglu Ma,
  • Ruibin Zhao and ,
  • Liangquan Wang and
  • Fanyong Zhang
  • + 1 author+ 0 author

27 February 2023

Ti-Ni films with various Ni contents (16.5, 22.0, 33.5 at. %) were deposited on Al alloy substrates using DC magnetron co-sputtering. The effects of Ni target power and substrate bias (−10, −70, −110 V) on morphologies, crystallogra...

(This article belongs to the Special Issue Novel Coatings for Corrosion Protection)
  • Article
  • Open Access
9 Citations
3,691 Views
13 Pages

27 January 2023

In this work, a Ni-alloy Deloro-22 was laser-deposited on a Ti–6Al–4V bar substrate with multiple sets of laser processing parameters. The purpose was to apply laser surface modification to synthesize different combinations of ductile TiN...

(This article belongs to the Special Issue Laser-Assisted Processing of Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,360 Views
20 Pages

Determination of the Corrosion and Biocompatibility Properties of As-Cast TiNi Alloys

  • Minja Miličić Lazić,
  • Dijana Mitić,
  • Biljana Dojčinović,
  • Marko Lazić and ,
  • Aleksandra S. Popović and
  • Branimir N. Grgur
  • + 1 author+ 0 author

5 July 2025

In this study, a TiNi alloy with a composition of 50 at.% of titanium and 50 at.% of nickel is investigated in terms of its corrosion and biocompatibility behavior for biomedical applications. The corrosion measurements, which include the determinati...

(This article belongs to the Special Issue Advances in Lightweight Alloys, 2nd Edition)
  • Article
  • Open Access
12 Citations
3,607 Views
20 Pages

TiNi-Based Material with Shape-Memory Effect for Surgical Treatment of Diseases of Small Intestine in Newborn and Young Children

  • Sergey G. Anikeev,
  • Maria I. Kaftaranova,
  • Valentina N. Hodorenko,
  • Stanislav D. Ivanov and ,
  • Nadezhda V. Artyukhova,
  • Anastasiia V. Shabalina,
  • Sergei A. Kulinich,
  • Grigory V. Slizovsky,
  • Anatolii V. Mokshin and
  • Victor E. Gunther
  • + 5 authors+ 0 author

Alloys based on TiNi are widely used in various fields of technology and medicine. In the present work, we report on the preparation of TiNi-alloy-based wire with the shape-memory effect, which was used for compression clips for surgery. The composit...

(This article belongs to the Special Issue Metallic Biomaterials for Medical Applications)
  • Article
  • Open Access
30 Citations
5,189 Views
11 Pages

Evaluation of Clinical Performance of TiNi-Based Implants Used in Chest Wall Repair after Resection for Malignant Tumors

  • Evgeniy Topolnitskiy,
  • Timofey Chekalkin,
  • Ekaterina Marchenko,
  • Yuri Yasenchuk and ,
  • Seung-Baik Kang,
  • Ji-Hoon Kang and
  • Aleksei Obrosov
  • + 2 authors+ 0 author

In this study, we assessed the outcomes after surgical treatment of thoracic post-excision defects in 15 patients, using TiNi knitted surgical meshes and customized artificial TiNi-based ribs. Methods: Eight patients were diagnosed with advanced non-...

(This article belongs to the Special Issue Medical Application of Functional Biomaterials)
  • Article
  • Open Access
13 Citations
3,696 Views
10 Pages

Grain Size and Phase Transformation Behavior of TiNi Shape-Memory-Alloy Thin Film under Different Deposition Conditions

  • Joohyeon Bae,
  • Hyunsuk Lee,
  • Duckhyeon Seo,
  • Sangdu Yun and ,
  • Jeonghyeon Yang,
  • Sunchul Huh,
  • Hyomin Jeong and
  • Jungpil Noh
  • + 3 authors+ 0 author

20 July 2020

TiNi shape-memory-alloy thin films can be used as small high-speed actuators or sensors because they exhibit a rapid response rate. In recent years, the transformation temperature of these films, manufactured via a magnetron sputtering method, was fo...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
16 Citations
3,262 Views
12 Pages

3 October 2020

Development of electrochemical supercapacitor electrode is the best way to improve the performance and conductivity of the alone materials and support energy storage devices. In this work, cyanate anions have used as building blocks to build series o...

(This article belongs to the Special Issue 3D Nanostructured Materials and Devices)
  • Article
  • Open Access
2 Citations
2,992 Views
11 Pages

Electrochemical Properties of Multilayered Sn/TiNi Shape-Memory-Alloy Thin-Film Electrodes for High-Performance Anodes in Li-Ion Batteries

  • Duck-Hyeon Seo,
  • Jun-Seok Lee,
  • Sang-Du Yun,
  • Jeong-Hyeon Yang and ,
  • Sun-Chul Huh,
  • Yon-Mo Sung,
  • Hyo-Min Jeong and
  • Jung-Pil Noh
  • + 3 authors+ 0 author

5 April 2022

Sn is a promising candidate anode material with a high theoretical capacity (994 mAh/g). However, the drastic structural changes of Sn particles caused by their pulverization and aggregation during charge–discharge cycling reduce their capacity...

  • Article
  • Open Access
2 Citations
2,162 Views
12 Pages

Synthesis of Ti-Ni and Zr-Ni Core–Shell Particles Using Galvanic Replacement

  • Alexander F. Dresvyannikov,
  • Leonid E. Kalugin and
  • Ekaterina V. Petrova

This article focuses on the galvanic replacement synthesis of Ti-Ni and Zr-Ni metal systems with a “core-shell” structure, which are potential precursors for intermetallics. The authors defined effective synthesis parameters and formation...

(This article belongs to the Section Inorganic Materials)
  • Article
  • Open Access
9 Citations
2,026 Views
19 Pages

21 May 2025

The significant phase transformation hysteresis in TiNi alloys limits their performance. To address this, copper (Cu) was added as an alloying element to reduce hysteresis. This study synthesized three compositions of Ti50Ni50−xCux (x = 0, 5, 7...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
442 Views
27 Pages

This study investigates the influence of laser spot size (Ø100 µm vs. Ø50 µm) on the microstructure, transformation behavior, and hardness of Ti-51.17 at.%Ni shape memory alloy samples fabricated by laser powder bed fusion....

  • Article
  • Open Access
1 Citations
777 Views
21 Pages

Metallic nanolaminates (MNLs) exhibit excellent mechanical properties due to unique modulation and interface structures. However, the correlation between the deformation of nanostructures and the mechanical behavior of the materials remains inadequat...

(This article belongs to the Section Theory and Simulation of Nanostructures)
  • Article
  • Open Access
10 Citations
3,755 Views
12 Pages

Structure and Properties of TiNi Shape Memory Alloy after Quasi-Continuous Equal-Channel Angular Pressing in Various Aged States

  • Roman Karelin,
  • Victor Komarov,
  • Vladimir Cherkasov,
  • Irina Khmelevskaya and ,
  • Vladimir Andreev,
  • Vladimir Yusupov and
  • Sergey Prokoshkin
  • + 2 authors+ 0 author

30 October 2023

The effect of quasi-continuous (QC) equal-channel angular pressing (ECAP) in various pre-aged states on the structure formation and mechanical and functional properties of a hyper-equiatomic titanium nickelide (TiNi) shape memory alloy is studied. QC...

(This article belongs to the Special Issue Microstructure and Properties of Intermetallics)
  • Article
  • Open Access
4 Citations
2,487 Views
14 Pages

Hydrogen’s Effect on the Shape Memory Effect of TiNi Alloy Single Crystals

  • Irina V. Kireeva,
  • Yuriy I. Chumlyakov,
  • Liya P. Yakovleva and
  • Anna V. Vyrodova

24 July 2023

Hydrogen’s effect on the shape memory effect (SME) of [1¯17]-oriented Ti49.7-Ni50.3 (at.%) alloy single crystals, with a B2–B19′ martensitic transformation (MT), was studied after being electrolytically hydrogenated at a curren...

(This article belongs to the Section Metallic Functional Materials)
  • Article
  • Open Access
18 Citations
8,286 Views
9 Pages

Repair of Orbital Post-Traumatic Wall Defects by Custom-Made TiNi Mesh Endografts

  • Valentin Shtin,
  • Valeriy Novikov,
  • Timofey Chekalkin,
  • Victor Gunther and ,
  • Ekaterina Marchenko,
  • Evgeniy Choynzonov,
  • Seung Baik Kang,
  • Moon Jong Chang,
  • Ji Hoon Kang and
  • Aleksei Obrosov
  • + 5 authors+ 0 author

Repairs of orbital post-traumatic and extensive malignant defects remain a major surgical challenge, in view of follow-up outcomes. Incorrect surgical management of injured facial structures results in cosmetic, ophthalmic, and social aftereffects. A...

  • Feature Paper
  • Review
  • Open Access
52 Citations
6,516 Views
24 Pages

16 August 2019

In recent years, multicomponent alloys with shape memory effects (SMEs), based on the ordered intermetallic compounds B2–TiNi, L21–Ni2MnGa, B2– and D03–Cu–Me (Me = Al, Ni, Zn), which represent a special important class o...

(This article belongs to the Special Issue Materials with Shape Memory: Phase Transformations, Microstructure and Properties)
  • Article
  • Open Access
21 Citations
4,374 Views
13 Pages

9 August 2019

The martensitic transformation and superelasticity of Ti49Ni51 shape memory alloy heat-treatment at different temperatures were investigated. The experimental results show that the microstructures of as-cast and heat-treated (723 K) Ni-rich Ti49Ni51...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys)
  • Article
  • Open Access
1 Citations
1,629 Views
13 Pages

Influence of Current Density upon Hydrogenation on the Shape Memory Effect of Binary TiNi Alloy Single Crystals

  • Irina V. Kireeva,
  • Yuriy I. Chumlyakov,
  • Liya P. Yakovleva and
  • Anna V. Vyrodova

7 August 2023

Some results concerning the hydrogen effect at electrolytic saturation at a current density of j = 1500 and 3500 A/m2 for 3 h at room temperature on the temperature dependence of the yield stress σ0.1(T) and the shape memory effect (SME) under...

(This article belongs to the Section Metallic Functional Materials)
  • Article
  • Open Access
18 Citations
3,005 Views
12 Pages

6 April 2022

The effect of post-deformation annealing (PDA) of nickel-enriched Ti-50.9 at.% Ni shape memory alloy deformed in various initially deformation-induced structure states on the structure and properties was studied. The phase composition, temperature ra...

  • Article
  • Open Access
5 Citations
3,238 Views
14 Pages

On Structural Sensitivity of Young’s Modulus of Ni-Rich Ti-Ni Alloy

  • Elena Ryklina,
  • Semen Murygin,
  • Victor Komarov,
  • Kristina Polyakova and ,
  • Natalia Resnina and
  • Vladimir Andreev
  • + 1 author+ 0 author

9 August 2023

When developing bone implants, Young’s modulus is one of the primary characteristics of the material that should be considered. This study focuses on regulating the modulus of Ti-50.8 at.% Ni alloy by varying the grain/subgrain size as well as...

(This article belongs to the Section Metallic Functional Materials)
  • Article
  • Open Access
16 Citations
4,684 Views
15 Pages

Fabricating TiNiCu Ternary Shape Memory Alloy by Directed Energy Deposition via Elemental Metal Powders

  • Yitao Chen,
  • Xinchang Zhang,
  • Mohammad Masud Parvez,
  • Joseph W. Newkirk and
  • Frank Liou

25 May 2021

In this paper, a TiNiCu shape memory alloy single-wall structure was fabricated by the directed energy deposition technique with a mixture of elemental Ti, Ni, and Cu powders following the atomic percentage of Ti50Ni45Cu5 to fully utilize the materia...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
20 Citations
7,970 Views
12 Pages

22 April 2014

Surface modification with oxide nanostructures is one of the efficient ways to improve physical or biomedical properties of shape memory alloys. This work reports a fabrication of highly ordered Ti-Ni-O nanotube arrays on Ti-Ni alloy substrates throu...

(This article belongs to the Special Issue Shape Memory Materials)
  • Article
  • Open Access
2 Citations
2,820 Views
12 Pages

26 April 2022

TiNi intermetallic alloys were prepared with 2, 4 and 6 at.% niobium (Nb) addition. The mechanical properties and microstructures of the alloys were investigated under both static (1 × 10−1 to 1 × 10−3 s−1) and dynamic (...

(This article belongs to the Topic Multiple Application for Novel and Advanced Materials)
  • Article
  • Open Access
3 Citations
5,046 Views
16 Pages

14 May 2018

Ni-rich nanodomains and Ti3Ni4 nanoprecipitates in the strain glass of Ni-rich Ti-Ni shape memory alloys (SMAs) play an important role in the origin and characteristic control of the strain glass transition. Ni-rich nanodomains are formed in the quen...

  • Article
  • Open Access
2 Citations
2,438 Views
10 Pages

Monolayer TiNI with Anisotropic Optical and Mechanical Properties

  • Shu-Juan Li,
  • Min Li,
  • Cheng-Gong Zhang,
  • Kun-Yue Shi and
  • Pei-Ji Wang

26 August 2022

Anisotropic monolayer materials have always been investigated by physical researchers. In this paper, we report a stable two-dimensional TiNI monolayer with anisotropic mechanical, optical, and electrical conduction properties. By combining the metho...

(This article belongs to the Section Crystal Engineering)
  • Article
  • Open Access
6 Citations
6,593 Views
12 Pages

Enhancing Thermoelectric Properties through Control of Nickel Interstitials and Phase Separation in Heusler/Half-Heusler TiNi1.1Sn Composites

  • Emily E. Levin,
  • Francesca Long,
  • Jason E. Douglas,
  • Malinda L. C. Buffon and ,
  • Leo K. Lamontagne,
  • Tresa M. Pollock and
  • Ram Seshadri
  • + 2 authors+ 0 author

28 May 2018

Thermoelectric devices, which allow direct conversion of heat into electrical energy, require materials with improved figures of merit ( z T ) in order to ensure widespread adoption. Several techniques have been proposed to increase the z T ...

(This article belongs to the Special Issue Half-Heusler, Silicide and Zintl-type Thermoelectric Materials)
  • Article
  • Open Access
1,126 Views
11 Pages

Fabrication of a Porous TiNi3 Intermetallic Compound to Enhance Anti-Corrosion Performance in 1 M KOH

  • Zhenli He,
  • Yue Qiu,
  • Yuehui He,
  • Qian Zhao and ,
  • Zhonghe Wang and
  • Yao Jiang
  • + 1 author+ 0 author

1 August 2025

Porous intermetallic compounds have the properties of porous materials as well as a combination of covalent and metallic bonds, and they exhibit high porosity, structural stability, and corrosion resistance. In this work, a porous TiNi3 intermetallic...

(This article belongs to the Special Issue Advanced Ti-Based Alloys and Ti-Based Materials)
  • Article
  • Open Access
15 Citations
3,317 Views
10 Pages

Structure and Multistage Martensite Transformation in Nanocrystalline Ti-50.9Ni Alloy

  • Tamara M. Poletika,
  • Svetlana L. Girsova,
  • Aleksander I. Lotkov,
  • Andrej N. Kudryachov and
  • Natalya V. Girsova

10 August 2021

An electron microscopic study of the evolution of the size, morphology, and spatial distribution of coherent Ti3Ni4 particles with a change in the aging temperature in a nanocrystalline (NC) Ti-50.9 at % Ni alloy with an inhomogeneous grain–subgrain...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Titanium Alloys)
  • Article
  • Open Access
4 Citations
1,568 Views
14 Pages

30 May 2024

To explore a new method to improve the wear resistance of TiNi shape memory alloy (SMA), Ti-50.8Ni alloy was treated by the method of ultrasonic surface shot peening. The microstructure evolution, hardness, and tribological behaviors have been furthe...

(This article belongs to the Special Issue Advanced Ceramic-Based Materials/Coatings for Anti-Wear and Corrosion Applications)
  • Article
  • Open Access
5 Citations
3,099 Views
15 Pages

The Effect of Cobalt on the Deformation Behaviour of a Porous TiNi-Based Alloy Obtained by Sintering

  • Nadezhda Artyukhova,
  • Sergey Anikeev,
  • Vladimir Promakhov and
  • Maxim Korobenkov

10 December 2021

This research investigates the effect of cobalt on the deformation behaviour of a porous TiNi-based alloy that was obtained by sintering. Porous TiNi-based alloys with cobalt additives, accounting for 0–2 at. % and with a pitch of 0.5, were obt...

(This article belongs to the Section Porous Materials)
  • Article
  • Open Access
5 Citations
2,853 Views
9 Pages

High-ZT Due to the Influence of Copper in Ti(Ni1-xCux)Sn

  • Yatir Sadia,
  • Dan Lumbroso and
  • Yaniv Gelbstein

25 February 2023

Most high-performance thermoelectric materials require either expensive, rare, or toxic elements. By doping TiNiSn, a low-cost, abundant thermoelectric compound, with copper as an n-type donor, some optimization can be performed for such materials. T...

(This article belongs to the Section Electronic Materials)

of 117