Skip to Content

10,917 Results Found

  • Article
  • Open Access
4 Citations
11,718 Views
13 Pages

4 April 2014

The aim of this study was to evaluate the interfacial microgaps generating between different materials and between materials and dentin after polymerization of the composite restorations, using SEM. Methods: The materials investigated were a composit...

  • Article
  • Open Access
628 Views
22 Pages

28 June 2026

Architectural design decisions in educational buildings often rely on spatial parameters such as ceiling height and window layout, yet systematic methods for evaluating their influence on user experience during early design stages remain limited. Thi...

(This article belongs to the Special Issue Digital Technologies in Buildings and Critical Infrastructure: Transforming Design, Construction, and Operations)
  • Article
  • Open Access
19 Citations
4,167 Views
29 Pages

The unsafe behavior of miners seriously affects the safety of deep mining. A comprehensive evaluation of miners’ unsafe behavior in deep coal mines can prevent coal mine accidents. This study combines HFACS-CM, SEM, and SD models to evaluate mi...

(This article belongs to the Section Occupational Safety and Health)
  • Article
  • Open Access
8 Citations
4,537 Views
21 Pages

SEM Analysis and Micro-CT Evaluation of Four Dental Implants after Three Different Mechanical Requests—In Vitro Study

  • Ana Sofia Vinhas,
  • Filomena Salazar,
  • José Manuel Mendes,
  • António Sérgio Silva and ,
  • Blanca Ríos-Carrasco,
  • José Vicente Ríos-Santos,
  • Javier Gil,
  • Mariano Herrero-Climent and
  • Carlos Aroso
  • + 4 authors+ 0 author

16 January 2024

Statement of problem: Implant-supported rehabilitations are an increasingly frequent practice to replace lost teeth. Before clinical application, all implant components should demonstrate suitable durability in laboratory studies, through fatigue tes...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
11 Citations
3,383 Views
21 Pages

5 July 2023

Prefabricated construction offers numerous advantages, such as high efficiency and energy efficiency. However, its promotion is impeded by the significant associated costs. Thus, the primary objective of this study is to investigate the overall life-...

(This article belongs to the Special Issue Technical, Material, Structural, and Managerial Issues in Prefabricated Construction)
  • Article
  • Open Access
6 Citations
2,607 Views
19 Pages

Evaluative Potential for Reclaimed Mine Soils Under Four Revegetation Types Using Integrated Soil Quality Index and PLS-SEM

  • Yan Mou,
  • Bo Lu,
  • Haoyu Wang,
  • Xuan Wang and ,
  • Xin Sui,
  • Shijing Di and
  • Jin Yuan
  • + 2 authors+ 0 author

4 July 2025

Anthropogenic revegetation allows effective and timely soil development in mine restoration areas. The evaluation of soil quality is one of the most important criteria for measuring reclamation effectiveness, providing scientific reference for the su...

  • Article
  • Open Access
6 Citations
2,747 Views
17 Pages

Fractal Analysis and Time Series Application in ZY-4 SEM Micro Fractographies Evaluation

  • Maria-Alexandra Paun,
  • Vladimir-Alexandru Paun and
  • Viorel-Puiu Paun

SEM microfractographies of Zircaloy-4 are studied by fractal analysis and the time-series method. We first develop a computer application that associates the fractal dimension and lacunarity to each SEM micrograph picture, and produce a nonlinear ana...

  • Article
  • Open Access
2 Citations
1,206 Views
11 Pages

Ultrastructural Evaluation (SEM) of Ascaris lumbricoides Eggs Treated with Silver Nanoparticles Biosynthesised by Duddingtonia flagrans Using Scanning Electron Microscopy (SEM)

  • Carolina Magri Ferraz,
  • João Pedro Barbosa de Assis,
  • Eduarda Cavalini Guerini,
  • Juliany Veloso Leal and ,
  • Filippe Elias de Freitas Soares,
  • Marcio Fronza,
  • Jackson Victor de Araujo,
  • Luís Madeira de Carvalho and
  • Fabio Ribeiro Braga
  • + 4 authors+ 0 author

15 January 2026

Ascaris lumbricoides is one of the most epidemiologically significant soil-transmitted helminths, and the environmental persistence of its eggs is largely attributed to their robust structural architecture. The search for ovicidal alternatives capabl...

(This article belongs to the Section Parasitic Pathogens)
  • Article
  • Open Access
7 Citations
2,987 Views
13 Pages

SEM Evaluation of Thermal Effects Produced by a 445 nm Laser on Implant Surfaces

  • Daniele Pergolini,
  • Gaspare Palaia,
  • Riccardo De Angelis,
  • Federica Rocchetti and ,
  • Gian Marco Podda,
  • Gianluca Tenore,
  • Alessandro Del Vecchio,
  • Michela Relucenti and
  • Umberto Romeo
  • + 4 authors+ 0 author

7 June 2023

The aim of this in vitro study was to evaluate thermal effects on implant surfaces using a 445 nm diode laser (Eltech K-Laser Srl, Treviso, Italy) with different power settings and irradiation modalities. Fifteen new implants (Straumann, Basel, Switz...

(This article belongs to the Section Lasers in Dentistry)
  • Article
  • Open Access
11 Citations
4,957 Views
8 Pages

SEM Evaluation of Endosequence BC Sealer Hiflow in Different Environmental Conditions

  • Orlando Donfrancesco,
  • Andrea Del Giudice,
  • Alessio Zanza,
  • Michela Relucenti and ,
  • Stefano Petracchiola,
  • Gianluca Gambarini,
  • Luca Testarelli and
  • Marco Seracchiani
  • + 3 authors+ 0 author

The aim of the present study is to evaluate the setting and sealant ability of two different bioceramic sealers in two different environmental conditions: humid and wet environment. Ex vivo root canal treatment was performed on 24 freshly extracted t...

  • Article
  • Open Access
7 Citations
2,630 Views
11 Pages

Evaluation of Ammonium Nitrate(V) Morphology and Porosity Obtained by SEM and Tomography Imaging

  • Andrzej Biessikirski,
  • Grzegorz Piotr Kaczmarczyk,
  • Łukasz Kuterasiński,
  • Malwina Kolano and
  • Mateusz Pytlik

27 June 2024

This paper presents an evaluation of the morphology of fertilizer-grade and prill-grade ammonium nitrate(V). All samples were analyzed using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and tomography techniques. The XRD results...

(This article belongs to the Special Issue Adsorption Materials and Their Applications)
  • Article
  • Open Access
819 Views
16 Pages

SEM Evaluation of Surface Wear on Drills from Selected Implant Systems—In Vitro Study

  • Piotr Kosior,
  • Kamila Wiśniewska,
  • Natalia Struzik,
  • Michał Kulus and ,
  • Edward Chlebus,
  • Agata Małyszek,
  • Klaudia Sztyler,
  • Jacek Matys and
  • Maciej Dobrzyński
  • + 4 authors+ 0 author

10 February 2026

Purpose: The aim of this in vitro study was to evaluate the degree of surface wear in implant drills from four commercial systems subjected to standardized osteotomy cycles. Materials: Four implant systems (Osstem, Megagen, Straumann, and Bego) were...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
28 Citations
4,843 Views
12 Pages

Microbiological and SEM-EDS Evaluation of Titanium Surfaces Exposed to Periodontal Gel: In Vitro Study

  • Sara Bernardi,
  • Serena Bianchi,
  • Anna Rita Tomei,
  • Maria Adelaide Continenza and
  • Guido Macchiarelli

4 May 2019

Inflammatory diseases affecting the soft and hard tissues surrounding an implant represent a new challenge in contemporary implant dentistry. Among several methods proposed for the decontamination of titanium surfaces, the administration of topical 1...

(This article belongs to the Special Issue Dental Implant Surface and Materials)
  • Article
  • Open Access
28 Citations
10,076 Views
22 Pages

Analysis and Evaluation of the Largest 500 Family Firms’ Websites through PLS-SEM Technique

  • Ascensión Barroso,
  • Óscar R. González-López,
  • Ramón Sanguino and
  • María Buenadicha-Mateos

23 February 2018

As few studies relate the technical aspects of a corporate website to a firm’s turnover, this paper aims to examine how the quality of a corporate website influences social networks and the company’s turnover in large family firms. The moderating and...

  • Article
  • Open Access
4 Citations
4,310 Views
10 Pages

SEM Evaluation of the Hybrid Layer of Two Universal Adhesives on Sound and DI Type II Affected Dentin

  • Antonio Libonati,
  • Virginia Di Taranto,
  • Lucia Memè,
  • Gianni Gallusi and
  • Vincenzo Campanella

9 November 2022

Universal nanofilled adhesives were recently introduced in restorative dentistry to simplify clinical procedures and improve adhesion in different clinical situation. This study investigated the effectiveness of two universal adhesives on both sound...

(This article belongs to the Special Issue Application of Nanomaterials in Dentistry)
  • Article
  • Open Access
244 Views
18 Pages

15 October 2026

(1) Background: To address formaldehyde-related health hazards and cadaver scarcity in anatomy education, silicone plastination offers a biosafe alternative, yet organ-specific structural responses at each stage remain inadequately characterized. (2)...

  • Article
  • Open Access
3 Citations
4,111 Views
13 Pages

31 August 2024

This in vitro study assessed the efficacy of three cleaning methods on lithium disilicate ceramic after the application of different try-in pastes through SEM analysis. Ten rectangular specimens of IPS e.max CAD were prepared using a diamond disc, cr...

(This article belongs to the Special Issue Esthetic Dentistry: Current Perspectives and Future Prospects)
  • Article
  • Open Access
3 Citations
5,276 Views
14 Pages

In Vitro Evaluation of Tooth Enamel Abrasion and Roughness Using Toothpaste with and Without Activated Charcoal: An SEM Analysis

  • Fiorella Thais Aquino Carmen,
  • Renzo Jesús Pro Romero,
  • Alexander Roger Espinoza Salcedo and
  • Paul Martín Herrera-Plasencia

21 October 2025

Background/Objectives: Dental enamel constitutes the first barrier of defense against external factors that constantly generate wear and damage. This study aimed to evaluate in vitro the abrasion and roughness of dental enamel using toothpaste with a...

  • Feature Paper
  • Article
  • Open Access
48 Citations
5,836 Views
11 Pages

Particulated, Extracted Human Teeth Characterization by SEM–EDX Evaluation as a Biomaterial for Socket Preservation: An In Vitro Study

  • José Luis Calvo-Guirado,
  • Alvaro Ballester Montilla,
  • Piedad N De Aza,
  • Manuel Fernández-Domínguez and ,
  • Sergio Alexandre Gehrke,
  • Pilar Cegarra-Del Pino,
  • Lanka Mahesh,
  • André Antonio Pelegrine,
  • Juan Manuel Aragoneses and
  • José Eduardo Maté-Sánchez de Val
  • + 5 authors+ 0 author

25 January 2019

The aim of the study was to evaluate the chemical composition of crushed, extracted human teeth and the quantity of biomaterial that can be obtained from this process. A total of 100 human teeth, extracted due to trauma, decay, or periodontal disease...

(This article belongs to the Special Issue Biomaterials and Implant Biocompatibility)
  • Article
  • Open Access
46 Citations
6,863 Views
17 Pages

Evaluation Method for Quality Risks of Safety in Prefabricated Building Construction Using SEM–SDM Approach

  • Xiaojuan Li,
  • Chen Wang,
  • Mukhtar A. Kassem,
  • Hamed H. Alhajlah and
  • Samuel Bimenyimana

The construction of prefabricated buildings is an effective and efficient approach to improving construction processes and productivity. However, there are practical problems in this approach, such as listing, safety risk levels, and quality control....

(This article belongs to the Special Issue Occupational Safety and Risks in Construction)
  • Article
  • Open Access
873 Views
15 Pages

Evaluation of Polytetrafluoroethylene (PTFE) Tape for Gingival Displacement Using CAD/CAM Analysis and Scanning Electron Microscopy (SEM)

  • Laura Monica Rusu,
  • Antonio Pop,
  • Stanca Cuc,
  • Mircea Aurelian Rusu and ,
  • Sorina Sava,
  • Anca Labunet,
  • Cristina Iosif and
  • Adriana Objelean
  • + 3 authors+ 0 author

Background: This in vitro study compared the effectiveness of polytetrafluoroethylene (PTFE) tape and a conventional cotton retraction cord for gingival displacement and evaluated the mechanical and microstructural characteristics of PTFE tape. Metho...

(This article belongs to the Section Dental Biomaterials)
  • Article
  • Open Access
1 Citations
1,932 Views
17 Pages

SEM-Based Evaluation and Quantitative Validation of ICON Resin Infiltration in Sound Enamel: A Microinvasive Preventive Strategy in Orthodontics

  • Alexandra Ecaterina Saveanu,
  • Catalina Iulia Saveanu,
  • Oana Dragos,
  • Maria Sophia Saveanu and
  • Daniela Anistoroaei

Background: Resin infiltration has emerged as a micro-invasive strategy for managing enamel porosities, offering both therapeutic and aesthetic benefits. ICON® (DMG, Hamburg, Germany) is the most widely used system; however, evidence on its penet...

  • Article
  • Open Access
965 Views
25 Pages

The rapid expansion of intelligent technologies within urban commercial built environments has created an urgent need to understand how the quality attributes of infrastructure of smart parking space translate into sustained user behavioral engagemen...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
32 Citations
4,957 Views
22 Pages

Evaluation of Urban Sustainability through Perceived Importance, Performance, Satisfaction and Loyalty: An Integrated IPA–SEM-Based Modelling Approach

  • Arghadeep Bose,
  • Debanjan Basak,
  • Subham Roy,
  • Indrajit Roy Chowdhury and ,
  • Hazem Ghassan Abdo,
  • Mohammed Aldagheiri and
  • Hussein Almohamad
  • + 2 authors+ 0 author

19 June 2023

In recent years, there has been a surge in research pertaining to sustainable urban development. Importance–performance analysis (IPA) has emerged as one of the most widely used methods. However, few studies have combined IPA with structural eq...

(This article belongs to the Special Issue Urbanization and Environmental Sustainability)
  • Article
  • Open Access
2,353 Views
12 Pages

Caries Preventive Action of Nd:YAG and Fluoride in Three Different pH Conditions: FTIR Spectroscopy and SEM Evaluation

  • Amanda Caramel-Juvino,
  • Nathalia A. Zanini,
  • Sabrina Gardiano Avelino,
  • Yasmin Reis Fontes-Oliveira and ,
  • Gleice Conceição Mendonça Germano,
  • Carlos de Paula Eduardo and
  • Denise Maria Zezell
  • + 2 authors+ 0 author

29 August 2023

This in vitro study aimed to evaluate the preventive action of topical fluoride application combined with laser irradiation under different pH conditions using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). A t...

(This article belongs to the Section Biophotonics and Biomedical Optics)
  • Article
  • Open Access
5 Citations
5,275 Views
18 Pages

The aim of this study is to evaluate the shear bond strength of different universal adhesives applied to intact, demineralized, and remineralized enamel surfaces with total-etch and self-etch modes and to examine the effect of universal adhesives on...

(This article belongs to the Special Issue Role of Dental Biomaterials in Promoting Oral Health)
  • Article
  • Open Access
1,798 Views
10 Pages

Evaluation of Pre-Sterilization Cleaning Protocols on Endodontic Files Using SEM: Effects on Elemental Composition and Surface Roughness

  • Rahaf A. Almohareb,
  • Reem M. Barakat,
  • Hadeel Alzahrani,
  • Raghad Alkhattabi and ,
  • Renad Alsaeed,
  • Sarah Faludah and
  • Reem Alsaqat
  • + 2 authors+ 0 author

27 July 2025

This study evaluated the efficacy of various cleaning protocols on two nickel–titanium (NiTi) file systems—RaCe EVO(RE) and EdgeFile X7(EE)—using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Eig...

  • Article
  • Open Access
9 Citations
2,297 Views
15 Pages

Time-Effect Comparative Evaluation of Three Remineralizing Agents on Artificial Enamel Lesions: A SEM-EDX In Vitro Study

  • Giulia Orilisi,
  • Riccardo Monterubbianesi,
  • Flavia Vitiello,
  • Vincenzo Tosco and ,
  • Maria Laura Gatto,
  • Paolo Mengucci and
  • Giovanna Orsini
  • + 2 authors+ 0 author

19 October 2025

Objective: This in vitro study quantitatively compared the time-dependent remineralization potential of three professional agents on artificially induced enamel lesions using Scanning Electron Microscopy (SEM) and energy-dispersive X-ray analysis (ED...

(This article belongs to the Section Dentistry, Oral Surgery and Oral Medicine)
  • Article
  • Open Access
18 Citations
11,328 Views
11 Pages

Effectiveness of Different Irrigation Techniques on Post Space Smear Layer Removal: SEM Evaluation

  • Alfredo Iandolo,
  • Massimo Pisano,
  • Dina Abdellatif,
  • Alessandra Amato and ,
  • Francesco Giordano,
  • Alessio Buonavoglia,
  • Giuseppe Sangiovanni and
  • Mario Caggiano
  • + 3 authors+ 0 author

2 June 2023

Background: Effective debris and smear layer removal affects post-cementation and bond strength. Aim: The aim was to compare the effectiveness of debris and smear layer removal using standard irrigation and activated irrigation with heated EDTA. More...

(This article belongs to the Section Prosthodontics)
  • Article
  • Open Access
23 Citations
4,149 Views
23 Pages

12 October 2020

Geopolymers are synthesized by mixing powdery solids, rich in amorphous silicon and aluminum species, with an alkaline solution, which leads to the formation of an inorganic alumosilicate network. Their acid resistance is affected by the composition,...

  • Article
  • Open Access
5 Citations
2,694 Views
15 Pages

12 March 2021

State-owned forest farms (SOFFs) help maintain forest ecological security and hold an important strategic position in China’s development. In this study we used 1305 sample data from 16 provinces, a structural equation model (SEM), and a projection p...

(This article belongs to the Section Sustainable Agriculture)
  • Article
  • Open Access
11 Citations
4,530 Views
11 Pages

In-Vitro Comparative Adhesion Evaluation of Bioceramic and Dual-Cure Resin Endodontic Sealers Using SEM, AFM, Push-Out and FTIR

  • Radu Marcel Chisnoiu,
  • Marioara Moldovan,
  • Doina Prodan,
  • Andrea Maria Chisnoiu and ,
  • Dana Hrab,
  • Ada Gabriela Delean,
  • Alexandrina Muntean,
  • Doina Iulia Rotaru,
  • Ovidiu Pastrav and
  • Mihaela Pastrav
  • + 5 authors+ 0 author

13 May 2021

(1) Background: Which are the adhesion characteristics of four root canal sealers: two experimental (dual cure resin based endodontic sealer (E1-DCR) and bioceramic based sealer (E2-BC)), and two commercial (RealSeal and TotallFill BC (FKG Germany))....

(This article belongs to the Special Issue Advance of the Mechanical Properties of Dental Materials)
  • Article
  • Open Access
14 Citations
4,666 Views
12 Pages

Microleakage and Marginal Integrity of Ormocer/Methacrylate-Based Bulk-Fill Resin Restorations in MOD Cavities: SEM and Stereomicroscopic Evaluation

  • Aslı A. Şenol,
  • Büşra Karabulut Gençer,
  • Bilge Tarçın,
  • Erkut Kahramanoğlu and
  • Pınar Yılmaz Atalı

30 March 2023

This in vitro study aimed to compare the microleakage and marginal integrity of methacrylate/ormocer-based bulk-fill composite (BFC) restorations used in cervical marginal relocation with two different layering thicknesses in mesio-occlusal-distal (M...

(This article belongs to the Special Issue Polymers Strategies in Dental Therapy)
  • Article
  • Open Access
14 Citations
4,261 Views
9 Pages

Evaluation of Effects of Various Irrigating Solutions on Chemical Structure of Root Canal Dentin Using FTIR, SEM, and EDS: An In Vitro Study

  • Indu Padmakumar,
  • Dharam Hinduja,
  • Abdul Mujeeb,
  • Raghu Kachenahalli Narasimhaiah and ,
  • Ashwini Kumar Saraswathi,
  • Mubashir Baig Mirza,
  • Ali Robaian,
  • Syed Nahid Basheer,
  • Mohmed Isaqali Karobari and
  • Giuseppe Alessandro Scardina
  • + 5 authors+ 0 author

Background: Sequential chemical application for irrigating a root canal during chemomechanical debridement can affect the dentin microstructure. Understanding the effects of various irrigants on chemical properties of dentin can elucidate their effec...

(This article belongs to the Special Issue Advanced Materials for Clinical Endodontic Applications)
  • Article
  • Open Access
7 Citations
3,163 Views
10 Pages

SEM Evaluation of the Marginal Gap of Zirconia-Reinforced Lithium Silicate Full Crowns and the Effect of Post Crystallization: An In Vitro Study

  • Asaf Shely,
  • Diva Lugassy,
  • Maxim Anufriev,
  • Joseph Nissan and ,
  • Olisya Rauchwerger and
  • Gil Ben-Izhack
  • + 1 author+ 0 author

4 March 2024

Background: This study compared the influence of crystallization on marginal gap adaptation by using computer-aided design and manufacturing (CAD-CAM) for producing monolithic zirconia-reinforced lithium silicate (ZLS) ceramic crowns. Methods: A tota...

(This article belongs to the Special Issue Feature Papers in Digital Dentistry)
  • Article
  • Open Access
1 Citations
2,621 Views
20 Pages

Micro and Macro Analyses for Structural, Mechanical, and Biodegradability of a Pulp-Based Packaging Material: A Comprehensive Evaluation Using SEM, XRD, FTIR, and Mechanical Testing

  • H. M. D. U. Sewwandi,
  • J. D. Chathuranga,
  • W. G. C. M. Kulasooriya,
  • D. K. A. Induranga and ,
  • S. V. A. A. Indupama,
  • G. D. C. P. Galpaya,
  • M. K. D. M. Gunasena,
  • H. V. V. Priyadarshana and
  • K. R. Koswattage
  • + 4 authors+ 0 author

The extensive accumulation of plastic waste causes serious environmental problems, leading to growing interest in biodegradable alternatives. In this study, the structural, chemical, and crystalline characteristics of a pulp-based material incorporat...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
74 Citations
7,100 Views
15 Pages

SEM/EDS Evaluation of the Mineral Deposition on a Polymeric Composite Resin of a Toothpaste Containing Biomimetic Zn-Carbonate Hydroxyapatite (microRepair®) in Oral Environment: A Randomized Clinical Trial

  • Andrea Butera,
  • Maurizio Pascadopoli,
  • Simone Gallo,
  • Marco Lelli and ,
  • Fabrizio Tarterini,
  • Federico Giglia and
  • Andrea Scribante
  • + 2 authors+ 0 author

16 August 2021

Toothpastes containing biomimetic hydroxyapatite have been investigated in recent years; the behavior of this material in the oral environment has been evaluated directly on dental enamel showing a marked remineralizing activity. To propose microRepa...

(This article belongs to the Special Issue Polymers for Oral and Dental Health)
  • Article
  • Open Access
17 Citations
3,922 Views
10 Pages

SEM Evaluation of Tooth Surface after a Composite Filling Removal Using Er:YAG Laser, Drills with and without Curettes, and Optional EDTA or NaOCl Conditioning

  • Jan Kiryk,
  • Jacek Matys,
  • Kinga Grzech-Leśniak,
  • Marzena Dominiak and ,
  • Małgorzata Małecka,
  • Piotr Kuropka,
  • Rafał J. Wiglusz and
  • Maciej Dobrzyński
  • + 3 authors+ 0 author

10 August 2021

(1) Background: This study aimed to evaluate the microporosity of the tooth surface structure adjacent to the cemento-enamel junction (CEJ) after the removal of composite fillings with a drill in comparison with removal by an Er:YAG laser and after c...

(This article belongs to the Collection Laser Processing for Bioengineering)
  • Article
  • Open Access
16 Citations
3,714 Views
35 Pages

21 February 2025

Based on three theories—the Technology Acceptance Model (TAM), the Unified Theory of Acceptance and Use of Technology (UTAUT), and Responsible Environmental Behavior (REB)—the present study proposes a model of AI product factors and pro-e...

  • Proceeding Paper
  • Open Access
96 Views
8 Pages

Preliminary Evaluation of Arenga pinnata Nutshell-Derived Carbon in a Membrane-Assisted Electrochemical Cell for Sodium Chloride Treatment

  • Jewel Rose B. Barbon,
  • Andrei B. Matias,
  • Abigail D. Monis,
  • John Paul M. Parani and ,
  • Paul JenRae Q. Samson,
  • Coleen Moira O. Sarmiento,
  • Jerry G. Olay,
  • Rugi Vicente C. Rubi and
  • Rich Jhon Paul D. Latiza
  • + 4 authors+ 0 author

28 October 2026

Arenga pinnata nutshell-derived carbon was prepared by heat treatment and KOH treatment, incorporated into a cathode, and evaluated in a membrane-assisted electrochemical cell. Available SEM–EDX observations describe the prepared material but d...

(This article belongs to the Proceedings of The 3rd International Online Conference on Energies)
  • Article
  • Open Access
4 Citations
1,926 Views
25 Pages

3 December 2025

The construction industry continues to face declining productivity due to its heavy reliance on labor and the repetitive, non-value-adding nature of supervision tasks. This study provides an exploratory, practitioner-based evaluation of how selected...

(This article belongs to the Topic Application of Smart Technologies in Buildings)
  • Article
  • Open Access
11 Citations
3,870 Views
15 Pages

15 April 2022

With the in-depth reform of intelligent manufacturing, selecting high-quality intelligent manufacturing system solution suppliers has become a key force to promote the intelligent transformation of manufacturing enterprises. However, manufacturing en...

(This article belongs to the Special Issue Advanced Applications of Artificial Intelligence, Data Analytics and Soft Computing)
  • Article
  • Open Access
11 Citations
2,916 Views
13 Pages

The authors performed an ex vivo and in vivo evaluation of the ultrastructural effects on the conjunctival epithelial cells of a new multiple-action tear substitute containing cross-linked hyaluronic acid, lipids and trehalose (Trimix®), using sc...

(This article belongs to the Special Issue Molecular Mechanisms and Novel Therapeutic Approaches for Eye Diseases)
  • Article
  • Open Access
402 Views
19 Pages

16 August 2026

Thai Buddhist funeral services constitute a substantial multi-actor service ecosystem that remains largely dependent on conventional, fragmented coordination among bereaved families, temples, service providers, and administrative actors, with limited...

(This article belongs to the Topic Challenges and Opportunities of Integrating Service Science with Data Science and Artificial Intelligence)
  • Article
  • Open Access
4 Citations
3,229 Views
25 Pages

Assessment of Precast Concrete Deterioration in Marine Environments Using Non-Destructive Methods

  • Tarek Ibrahim Selouma,
  • Walid Fouad Edris,
  • Abd Al-Kader A. Al Sayed,
  • Rashid Al-Marri and
  • Mostafa Shaaban

Concrete structures in marine environments face significant degradation due to reinforcement corrosion caused by chloride ingress and sulfate attack. Poor construction quality, inadequate standards, and suboptimal design can further accelerate deteri...

(This article belongs to the Special Issue Study on the Durability of Construction Materials and Structures)
  • Feature Paper
  • Article
  • Open Access
2 Citations
4,845 Views
13 Pages

27 June 2021

The aim of this study was the morphological evaluation of root surfaces subjected to manual (curette) and ultrasonic (conventional and diamond tips) scaling. The surface was then polished with a rubber cup and three medium-sized pastes. Ninety teeth...

(This article belongs to the Special Issue Restorative and Endodontic Materials for Clinical Dentistry)
  • Article
  • Open Access
454 Views
37 Pages

4 October 2026

Existing evaluation tools do not fully capture the service characteristics of digital human guide systems at cultural heritage sites. Treating digital human guiding as a sociotechnical service system, this study develops a six-dimensional, 24-indicat...

  • Article
  • Open Access
35 Citations
28,810 Views
21 Pages

14 May 2025

Excessive social media use has become a growing concern due to its potential to affect self-perception, particularly through lowered self-esteem and a heightened fear of negative evaluation. With the increasing tendency for individuals to curate idea...

  • Article
  • Open Access
10 Citations
3,478 Views
14 Pages

SEM Evaluation of Marginal Adaptation E-Max Crowns Manufactured by Printing-Pressed and Milling

  • Ana Ispas,
  • Marioara Moldovan,
  • Stanca Cuc,
  • Doina Prodan and ,
  • Cecilia Bacali,
  • Ioan Petean,
  • Smaranda Buduru,
  • Manuela Manziuc and
  • Laura Iosif
  • + 4 authors+ 0 author

23 November 2023

Dental crown marginal adaptation is a matter of the success of dental restoration treatment. Nowadays, there are many technological ways for crown manufacturing, such as tridimensional printing of an exactly desired shape through CAD-assisted systems...

(This article belongs to the Section Medical Imaging and Theranostics)
  • Article
  • Open Access
308 Views
17 Pages

30 September 2026

Objective: The aim of this study was to comparatively evaluate the effects of fluoride- and casein phosphopeptide–amorphous calcium phosphate (CPP-ACP)-containing products and commercial pediatric dentifrices containing herbal ingredients (prop...

(This article belongs to the Special Issue Active Dental Materials and Their Applications)

of 219