In recycled asphalt mixtures, the RAP binder often becomes stiff and brittle due to aging, making it difficult to achieve a complete integration with the added virgin binder, which could provide a negative impact on the long-term performance of the r...
Binder jetting is the most widely implemented additive technology for the fabrication of sand molds. However, the use of furan binder-jetting technology in the production of molds for vacuum casting is hindered by the thermal destruction of the furan...
High quality binders, such as antibodies, are of critical importance for chemical sensing applications. With synthetic alternatives, such as molecularly imprinted polymers (MIPs), less sensor development time and higher stability of the binder can be...
Binder jetting additive manufacturing (BJAM) offers an effective approach for fabricating silicon carbide (SiC) parts with complex geometries; however, part quality is strongly influenced by process variables. Binder saturation and drying time are ke...
Aging by oxidation of asphalt roadway material promotes changes in its physical, chemical, and rheological properties, affecting its hardening and accelerating the degradation of its corresponding asphalt mixture. Titanium dioxide (TiO2) has been app...
Asphalt is an essential material in the construction of asphalt pavements. Due to its high demand and dependence on petroleum, it is crucial to use greener materials that can fully or partially replace petroleum-based binders. The characteristics of...
In this work, Ni0.5Zn0.5Fe2O4 is synthesized as binder-based (NZF) and binder-free electrodes (NZF@NF). The binder-free electrode is directly synthesized on nickel foam via facile hydrothermal techniques. The crystalline phase of both of these electr...
3,3-Bis (azide methyl) oxy-butyl ring (BAMO)-tetrahydrofuran (THF) copolyethers (PBT) are some of the most promising energetic binders. In this paper, the methods of synthesis of PBT binders are reviewed, and the research progress in PBT binders and...
The suitability of pharmaceutical binders for continuous twin-screw wet granulation was investigated as the pharmaceutical industry is undergoing a switch from batch to continuous manufacturing. Binder selection for twin-screw wet granulation should...
Reclaimed asphalt pavement (RAP) is preheated to 120 °C or lower in hot central plant recycling due to specification and equipment limitations. However, the insufficient activation of reclaimed asphalt (RA) caused by low preheating temperature ma...
The crumb rubber modified (CRM) binder was evaluated considering the general operating temperatures of high, intermediate, and low temperatures. CRM binders were produced with four different contents (0, 5, 10, and 15%) using the base asphalt binder...
The design of binders plays a pivotal role in achieving enduring high power in lithium-ion batteries (LIBs) and extending their overall lifespan. This review underscores the indispensable characteristics that a binder must possess when utilized in LI...
Binder jetting has the potential to revolutionize the way we produce medicine. However, tablets produced by binder jetting technology can be quite fragile and hard to handle. In this study, the printing process and ink composition were examined to op...
Lithium-ion batteries (LIBs) have become indispensable energy-storage devices for various applications, ranging from portable electronics to electric vehicles and renewable energy systems. The performance and reliability of LIBs depend on several key...
This study presents the results of a comprehensive study on various agglomeration methods and binder types for producing briquettes from raw materials. Also, this research focuses on one of the major issues in the production of extrusion briquettes,...
The incorporation of reclaimed asphalt (RA) in hot mix asphalt mixtures is widely considered a sustainable solution for road infrastructure development. Under the scope of the circular economy (CE), the multiple recycling capability of RA has to be a...
The technology for obtaining hydrofluoric acid and the peculiarities of its production were studied, and the physical and chemical properties of the waste were examined. Activators that accelerated the hardening of the anhydrite binder were selected....
The circular economy in construction requires the valorization of gypsum waste from construction and demolition. Waste from gypsum plasterboards is considerable, yet it is still viewed more as a problem than as a mineral resource. This study investig...
The usage of modified asphalt binder in road pavements has been increasing in the past few decades. Therefore, quality control and understanding of modified asphalt binders have become an important issue. This study was conducted as a part of a large...
The aim of this study was to attempt to use barley malt as a natural, organic binder in the technology of molding sand. TGA analysis of the binder was performed, during which temperatures of thermal decomposition of its components were determined. Th...
This research delves into the realm of asphalt technology, exploring the potential of nano-additives to enhance traditional asphalt binder properties. Focusing on Nano-Titanium Dioxide (NT), Nano-Aluminum Oxide (NA), and Nano-Silica Oxide (NS), this...
Transparent binder is used to substitute conventional black asphalt binder and to provide light-colored pavements, whereas nano-TiO2 has the potential to promote photocatalytic and self-cleaning properties. Together, these materials provide multifunc...
When exposed to sun radiation and heat, asphalt binders age, resulting in reduced flexibility, cracking, and pavement failure. Given the increasing demands of traffic, environmental concerns, and resource scarcity, highway agencies and researchers ar...
Antigorite is a very common rock-forming mineral and it is often present in mining wastes. Utilization of these wastes is a very important issue from the environmental point of view. A potential use for mining wastes is for the production of building...
As a renewable biomass resource, biochar is new to modify or replace asphalt binder in pavement engineering. This paper focuses on the effect of biochar on the anti-aging performance of asphalt binder. The short- and long-term aging properties of bio...
The chemical composition of asphalt binder is closely related to its macroscopic properties, and as an important road building material, its performance directly affects the service performance of asphalt binder pavement. Saturate, aromatic, resin, a...
This article describes utilization of a cement kiln bypass dust utilization as an added component in a hydraulic road binder. Three experimental binder mixes (BM1–BM3) with variation in the composition of the main constituents (cement clinker,...
This work reports and describes a novel alkali-activated metakaolin as a potential binder material for the granulation of zeolites, which are widely used as CO2 adsorbents. The alkali-activated binders are zeolite-like materials, resulting in good ma...
Binder jet additive manufacturing enables the production of complex components for numerous applications. Binder jetting is the only powder bed additive manufacturing process that is not fusion-based, thus manufactured parts have no residual stresses...
This paper presents an analysis of the stabilization of different soil types using a hydraulic binder. A study was carried out on soils that can be classified into two groups: cohesive and non-cohesive soils. Clay soils of medium and low plasticity a...
The purpose of this study was to evaluate the influence of anti-stripping green additives on the behaviour of a fresh binder. Firstly, the adhesiveness (spectrophotometric method) and affinity (rolling bottles method) of a binder with a penetration g...
The rheological properties of warm-mix recycled asphalt binders are critical to enhancing design quality and interpreting the performance mechanisms of the corresponding mixtures. This study investigated the rheological behavior of warm-mix recycled...
Natural resources are declining due to rising infrastructure, renovation, demolition, and recycling of existing structures that necessitate sustainable development. It urges the researchers to modify the aged asphalt binder in the recycling to enhanc...
The extent of rubber-bitumen interaction in crumb rubber modified (CRM) binders depends on the contact time of rubber-bitumen as well as the temperature and mixing energy. However, this can vary depending on the composition of the base binders as wel...
The purpose of this study was to verify the feasibility of using biochar from oat hulls (BO) as a potential bio-modifier to improve the physical properties of conventional asphalt binder. The BO and asphalt binder were characterized by confocal (fluo...
In the manufacturing process of lithium-ion batteries, the current organic solvent-based processes will inevitably be replaced with eco-friendly water-based processes. For this purpose, the current organic-soluble binder should be replaced with a wat...
The growing amount of waste toner (WT) has posed a significant environmental challenge. Meanwhile, researchers are interested in the feasibility of utilizing waste toner as an asphalt binder modifier because its primary chemical components (Styrene-a...
Binder jetting is a crucial process in additive manufacturing (AM) and is widely used in sand mold casting. This study explores the challenges of simulating binder droplets in ANSYS Fluent, including complexity and computational time. To overcome the...
A novel composite binder (humic acid modified bentonite, HAMB) and two other binders (bentonite and Modified humic acid, MHA) were used to explore the effects of binders on the properties of magnetite green pellets in this study. The results of green...
Finding beneficial uses for waste plastics has been an environmental challenge for municipalities. A limited number of studies have investigated the performance of asphalt mixtures containing plastic waste in cold regions that experience freeze-thaw...
Poor storage stability is a key problem restricting the rapid development and wide application of rubber-modified asphalt binder, and activation of rubber has shown good prospects to solve this problem. In this study, two activation methods, coating...
In order to analyze the effect of flame retardant and warm mix asphalt (WMA) additives-Sasobit on the flame-retardant performance and pavement performance of asphalt binder, the limiting oxygen index test, conventional performance test, and Superpave...
Due to periodic variations in temperature and heavy traffic loading, hot-mix asphalt (HMA) pavements undergo considerable distress during their service life. The rheological properties of asphalt binder, when subjected to complex physical and chemica...
In order to analyze the thixotropy of mastic asphalt concrete during the mixing process, the factors affecting the thixotropy of mastic asphalt binder and asphalt mastic are studied, and the measures to shorten the mixing time of mastic asphalt mixtu...
In this paper, a method for optimizing the mixing ratio of filler coke and binder for high-strength carbon–carbon composites is proposed. Particle size distribution, specific surface area, and true density were analyzed to characterize the fill...
Binder jetting is known to produce porous objects by depositing the binder selectively layer by layer on a powder bed. In this study, the pore size of printed parts and the correlating mechanical properties are investigated on a commercially availabl...
Binders play a very important part in electrodes, as they closely bind active materials, conductive agents, and current collectors together. The application of binders is critical to the electrochemical performance of Li-S batteries. Herein, a series...
WC-Ni hardmetals, especially with the addition of Cr, are the first choice for wear parts in a corrosive environment. Despite Ni being studied as a metallic binder matrix in hardmetals for as long as Co, the mechanical properties achieved have consis...
In this study, X-ray computed tomography was used to analyze powder binder separation in TC4 green bodies. Firstly, for the scanned results of the whole green body, because of the relative low resolution (36 µm), the powder binder separation can only...
Additive manufacturing (AM) of ceramics presents a promising approach for the production of complex sanitaryware prototypes, offering advantages in terms of cost and time to market. This study explores binder jetting (BJ) as an optimal AM technique d...
of 131