Fracture failure caused by hydrogen embrittlement (HE) is a major concern for the system reliability and safety of hydrogen storage vessels, which are generally made of 2.25Cr1Mo0.25V steel. Thus, study of the influence of pre-charged hydrogen on fra...
The effect of post-welding heat treatment (PWHT) on the microstructure and mechanical properties of large-thickness 2.25Cr1Mo0.25V steel was investigated through simulated post-welding heat treatment (SPWHT). The results showed that an increase in th...
The carbide characteristics of 2.25Cr1Mo0.25V steel have an extremely important influence on the mechanical properties of welding joints. In addition, hydrogen resistance behavior is crucial for steel applied in hydrogenation reactors. The carbide mo...
Hydrogenation reactor shells are safety-critical thick-section pressure-bearing components in petrochemical hydroprocessing equipment. Long-term exposure to elevated temperature, high pressure, and hydrogen-bearing media requires not only adequate st...
Al-Cr-N ternary coatings were deposited on the surface of Cr12MoV alloy tool steel via multiarc ion plating technology. The microstructure and mechanical and tribological properties of these coatings were systematically characterized, analyzed, and c...
Effects of tempering temperature on the microstructures and low temperature impact toughness of 42CrMo4-V steel were investigated. Microstructures of 42CrMo4-V steel after tempering at 570–720 °C for 3 h were experimentally investigated using scannin...
The transformation behavior and microstructural evolution during continuous cooling within the heat affected zone between the weld beads of a 2.25Cr-1Mo-0.25V all-weld metal and the corresponding 2.25Cr-1Mo-0.25V base metal were investigated by means...
In this work, the fatigue crack growth (FCG) behavior and fatigue damage mechanism of the 2.25Cr1Mo0.25V steel welded joint used in hydrogenation reactors were investigated. The multi-pass welding was carried out to manufacture the welded joint using...
12Cr1MoV is commonly used for pressure pipes in thermal power plants. However, its service life has always prevented the development of such metallic materials. This experiment applies a tensile and impact experiment to investigate the metal cluster...
The 2.25Cr1Mo0.25V steel is a vanadium-modified 2.25Cr1Mo steel and is being widely used in the manufacture of heavy-wall hydrogenation reactors in petrochemical plants. However, the harsh service environment requires a thorough understanding of high...
Hydrogen embrittlement (HE) is a critical issue that affects the reliability of hydrogenation reactors. The hydrogen diffusivity/trap characteristics of 2.25Cr-1Mo-0.25V steel are important parameters mainly used to study the HE mechanism of steel al...
When alumina is produced by the Bayer process with high-sulfur bauxite, the sulfur would strongly corrode the 12Cr1MoV steel made heat exchanger. This study investigated the initial corrosion behavior of the 12Cr1MoV steel exposed to a thiosulfate-co...
In order to enhance the contact fatigue performance of the Cr12Mo1V1 die steel component, the ultrasonic impact surface-modification process was introduced into the heat treatment process of 1060 °C quenching + cryogenic treatment (−150 &de...
In this paper, we investigated the effects of the matrix and precipitates in Cr-Ni-Mo-V rotor steel on its mechanical properties after water quenching and tempering (450–700 °C). The results indicate that the microstructure and mechanical properties...
Prosthetic joint infection is an uncommon entity, but it supposes high costs, both from the economic side to the health systems and from the emotional side of the patient. The evaluation of the bacterial adherence to different materials frequently in...
Studies of 4Cr5MoSiV1 die steel suggest that under appropriate conditions, additions of rare earth (RE) can enhance tensile property. This improvement is apparently due to the more uniform distribution of carbides and the enhancement of precipitation...
In the production of critical parts for various machines and mechanisms, expensive structural steels are used alloyed with chromium, nickel, molybdenum, and vanadium. In practice, the wear resistance of parts, especially under severe operating condit...
Cr12MoV has been widely used in the manufacture of stamping and drawing dies. In the present study, an attempt was made to improve the mechanical properties of Cr12MoV by laser cladding Ni60 alloy reinforced by WC. X-ray diffraction (XRD), scanning e...
A strategy combining intercritical quenching, pre-tempering, and tempering processes was implemented to optimize the microstructures and mechanical properties of 5CrNiMoV steel. By intercritically quenching at 1050 °C, pr-tempering at 600 °C,...
The corrosion–wear coupling damage failure of 8Cr4Mo4V bearing steel under marine atmospheric conditions significantly limits aeroengine bearing applications. The present work aims to investigate the evolution of the corrosion–wear proper...
The effect of parameters on internal crack healing in 30Cr2Ni4MoV steel for 600-ton ultra-super ingots was systematically investigated. The results show that the degree of crack healing increases with increasing healing temperature, holding time, red...
Enhancing the surface mechanical properties and extending the service life of 45CrNiMoV mold steel are critical goals in mold development. To achieve these objectives, electron beam (EB) irradiation was employed to treat the 45CrNiMoV mold steel. Thi...
The formation of surface austenite leads to microstructural changes, causing grinding hardening. However, the effect of grinding mechanical stresses on surface austenitization remains unclear. Additionally, the mechanical properties of the metamorphi...
The valve stem made of 20CrMo1V1A has low surface resistance and high susceptibility to corrosion, significantly curtailing its service life. To address these issues, a high-quality ultrasonic rolling (USR) technology was applied to the 20CrMo1V1A st...
The use of high strength steel allows the design of lighter, more slender and simpler structures due to high strength and favorable ductility. Nevertheless, the increase of yield strength does not guarantee the corresponding improvement of fatigue re...
The modeling of austenite grain growth of 25Cr2Ni4MoV steel for super-large nuclear-power rotors was investigated during the common heating process including the continuous heating and isothermal heating process. Based on the isothermal grain growth...
This study investigates the hot deformation behavior of electroslag remelted (ESR) 25Cr2Ni2MoV steel, focusing on the effects of deformation temperature and strain rate on flow stress, microstructure evolution, and dynamic recrystallization (DRX) mec...
Bandsaw blades are typical band-shaped cutting tools that are characterized by their low stiffness and micro-level cutting depth, resulting in distinct wear mechanisms compared to rigid cutting tools. In this study, the wear curve and wear mechanisms...
Fe-Co-Cr-Mo-W-V-C alloy is one of the most important materials for manufacturing drills, dies, and other cutting tools owing to its excellent hardness. However, it is prone to cracking due to its poor hot ductility during continuous hot working proce...
The effects of ultrasonic-aided quenching (USQ) on the microstructure and corrosion properties of 35CrMoV steel in a simulated seawater environment (wt % (NaCl) = 3.5) were studied. The corrosion properties of the steel were studied by electrochemica...
In this paper, we present the mechanisms of premature fracture of modular neck stems in two case studies: (I) when the neck and stem are both made of the same Ti6Al4V alloy, and (II) when the neck and stem are made from two different alloys, CoCrMo a...
Relationships among processing, microstructure, and properties of Cr12Mo1V1Co steel under various quenching and tempering conditions were systematically investigated, with particular emphasis on tribological behavior. The microstructural evolution du...
Measurements of thermal diffusivity, heat capacity and thermal expansion of X37CrMoV5-1 (1.2343) hot-work tool steel and Maraging 350 (1.6355) steel in the temperature range from −50 °C to 1000 °C were carried out in this paper. Both X3...
Hydrogen embrittlement (HE) is a critical issue that hinders the reliability of hydrogenation reactors. Hence, it is of great significance to investigate the effect of hydrogen on fracture toughness of 2.25Cr-1Mo-0.25V steel and weld. In this work, t...
In supporting the stable operation of high-penetration renewable energy grids, flywheel energy storage systems undergo frequent charge–discharge cycles, resulting in significant stress fluctuations in the rotor core. This paper investigates the...
Due to various concerns about the use of metal-on-metal that is detrimental to users, the use of metal as acetabular cup material was later changed to ultra high molecular weight polyethylene (UHMWPE). However, the wear on UHMWPE releases polyethylen...
Steel of the mild-strength S355J2+N steel grade is the most often used steel for manufacturing carrying sections of constructions exposed to fatigue loads. The use of high-strength steels, such as S690QL, allows for the creation of structures that ar...
8Cr4Mo4V bearing steel is a critical material for main shaft bearings in aero-engine applications. However, the current understanding of the micro-mechanical properties of its matrix and primary carbide phases (vanadium-rich and molybdenum-rich carbi...
In this study, the effect of microstructure under various dose rates of plasma immersion ion implantation on 8Cr4Mo4V steel has been investigated for crystallite size, lattice strain and dislocation density. The phase composition and structure parame...
The automobile covering parts mold is a key piece of equipment in the automobile industry, and its drawbead is the core element that affects the life of the mold and the quality of the parts made. Due to the complex structure of the mold cavity for c...
The heat treatment residual stress of 8Cr4Mo4V steel bearings seriously affects the contact fatigue life. The micro stress concentration at the carbide interface leads to the initiation of micro cracks. Therefore, in this paper, the systematic analys...
In order to investigate the different effects of trace TiB and TiC on the microstructure and the mechanical properties of Ti-5Al-5Mo-5V-1Fe-1Cr Ti alloy, two different modified Ti-5Al-5Mo-5V-1Fe-1Cr Ti alloys are fabricated via a consumable vacuum ar...
Multi-pass welded joints of 10CrNi3MoV high-strength low-alloy (HSLA) steel were systematically investigated for high-cycle fatigue (HCF) behavior using microstructural characterization, mechanical behavior, and inherent defect analysis. Gas metal ar...
High-temperature plastic flow of heat-resistant 2.25Cr-1Mo-0.25V steel was investigated by hot tension (at 500–650 °C) on a Gleeble 3800 machine. The strain rate of hot tension was set as 0.001–1 s−1. The constitutive relation o...
The present study examined the interactions between the structure, microstructure and mechanical properties of CrMnFeCoNi, CrMnFeCoNiV0.5 and CrMnFeCoNiMo0.5 High-Entropy Alloys (HEAs). Starting from elemental powders, the HEAs were obtained by high-...
The ultra-large steam turbine rotor and heavy gas turbine disk are key components of power stations. They are manufactured from very large ingots, and extremely low strain rates are used during forging. In this study, a high-strength CrNiMoV steel, 2...
The hot deformation behavior of as-cast 30Cr2Ni4MoV steel was characterized using processing maps in the temperature range 850 to 1200 °C and strain rate range 0.01 to 10 s−1. Based on the obtained flow curves, the power dissipation maps at different...
End-stage temporomandibular joint (TMJ) disorders often necessitate total joint replacement, and the selection of biomaterial directly impacts long-term outcomes. Ti6Al4V and CoCrMo are commonly used alloys, yet their biomechanical performance in pat...
The demand for heat-resistant steel has increased owing to its utility in numerous devices that must withstand high steam pressures and high temperatures, such as turbine rotors and blades in ultra-supercritical power plants. It is inevitable to join...
In this paper, through high-temperature tensile tests of 55NiCrMoV7 steel, high-temperature fracture behavior, microstructure evolution, and carbide distribution characteristics of both the thermal–mechanical coupling zone (fracture zone) and t...
of 16