Megathrust faults in subduction zones often serve as seismogenic environments for destructive earthquakes. To verify whether the material properties of subduction zones influence aftershock propagation and earthquake magnitude, we investigated the no...
In this paper, an improved method based on a mixture of Gaussian and quadrilateral functions is presented to process airborne bathymetric LiDAR waveforms. In the presented method, the LiDAR waveform is fitted to a combination of three functions: one...
Due to the difference in surface reflectivity, the laser measurement waveform data recorded in full waveform have a saturation phenomenon. When the signal is saturated, the echo waveform produces peak clipping and pulse spreading, which seriously res...
Airborne LiDAR bathymetry (ALB) has shown great potential in shallow water and coastal mapping. However, due to the variability of the waveforms, it is hard to detect the signals from the received waveforms with a single algorithm. This study propose...
Spaceborne Global Navigation Satellite System-Reflectometry (GNSS-R) has been the research focus of Earth observation because of its unique advantages; however, there are still many challenges to be resolved. The reduction of the impact of the satell...
In this paper, we propose a new approach based on the fitting of a generalized linear regression model in order to detect points of change in the variance of a multivariate-covariance Gaussian variable, where the variance function is piecewise consta...
Light Detection And Ranging (LiDAR) in forested areas is used for constructing Digital Terrain Models (DTMs), estimating biomass carbon and timber volume and estimating foliage distribution as an indicator of tree growth and health. All of these purp...
In this paper, we characterize the sea-ice elevation distribution by using NASA’s Operation IceBridge (OIB) Airborne Topographic Mapper (ATM) L1B data over the Arctic Ocean during 94 Spring campaigns between 2009 and 2019. The ultimate objectiv...
Satellite altimeters have been used to monitor river and reservoir water levels, from which water storage estimates can be derived. Inland water altimetry can, therefore, play an important role in continental water resource management. Traditionally,...
Height measurement and location by a laser sensor is a key technology to ensure accurate and stable operation of a dispensing robot. In addition, alternation of dynamic and static working modes of a robot, as well as variation of surface and height o...
The Global Navigation Satellite System Reflectometry (GNSS-R) technique exploits the characteristics of reflected GNSS signals to estimate the geophysical parameters of the earth’s surface. This paper focuses on investigating the wind speed retrieval...
ZnSe-based scintillators are promising materials for compact beta spectroscopy, but the detector-relevant properties of ZnSe(Al,O) remain poorly documented and strongly dependent on dopant and defect structure. This work presents an experimental char...
To overcome the drawbacks of conventional wedge cut blasting—high peak particle velocity (PPV), low blasthole utilization, and a high proportion of large fragments—this paper proposes a delayed blasting method for wedge cut blasting. By i...
Full waveform inversion (FWI) and distributed acoustic sensing (DAS) are powerful tools with potential to improve how seismic site characterization is performed. FWI is able to provide true 2D or 3D images of the subsurface by inverting stress wave r...
A new method called Bézier curve fitting (BCF) for approximating CryoSat-2 (CS-2) SAR-mode waveform is developed to optimize the retrieval of surface elevation of both sea ice and leads for the period of late winter/early spring. We found that...
On 5 September 2022, the moment magnitude (Mw) 6.7 Luding earthquake struck in the Xianshuihe Fault system on the eastern edge of the Tibet Plateau, illuminating the seismic gap in the Moxi segment. The fault system geometry and rupture process of th...
The mechanical strength and cyclic fatigue behavior of PIC700 commercial eco-piezoceramic disks are investigated under biaxial loading on unpoled and poled samples. The bending strength of unpoled samples was higher than those of poled ones. Fatigue...
The active collision of the Apulian continental lithosphere with the Eurasian plate characterizes the tectonics of the Epirus region in northwestern Greece, invoking crustal shortening. Epirus has not experienced any strong earthquakes during the ins...
Bonded Nd-Fe-B magnets have greater freedom of shape than sintered Nd-Fe-B magnets. The ring structure is one of the typical structures of bonded Nd-Fe-B materials. In this paper, we analyzed the generation and spread of demagnetization fault (DMF) a...
Pulse wave velocity (PWV) measured at a specific artery location is called local PWV, which provides the elastic characteristics of arteries and indicates the degree of arterial stiffness. However, the large and cumbersome ultrasound probes require a...
Procedures that predict or test wear in total hip replacements use the contact force waveform as their principal input. This approach rests on the assumption that activities producing large contact forces also impose a large frictional burden. Becaus...
The low intensity and frequent blasting shock wave created by a blasting impact will exert notable destructive effects on an ore rock-filling body. In order to investigate the energy transfer process of the blasting shock wave energy in the filling b...
A theoretical model is presented for the accurate detection of a gas leak source through a pinhole in a cylindrical storage vessel using the acoustic emission (AE) technique. Pinholes of various diameters ranging from 0.20 to 1.2 mm were installed as...
To study the effect of frequency on the attenuation characteristics of acoustic emission signals in wood, in this paper, two types of hard wood and soft wood were studied separately, and the energy attenuation model of the propagation process of AE s...
We report here on a laser ultrasonic system to indirectly evaluate the preload force of different-frequency piezoelectric bolts. This newly developed system enables us to achieve the goal of non-contact excitation and synchronously collects the laser...
This paper aims to investigate wave dispersion behavior in the quasi-solid state of concrete to better understand microstructure hydration interactions. The quasi-solid state refers to the consistency of the mixture between the initial liquid–s...
Performing research on the variation in lake water on the Qinghai–Tibet Plateau (QTP) can give the area’s ecological environmental preservation a scientific foundation. In this paper, we first created a high-precision dataset of lake wate...
The global digital elevation measurement (DEM) products such as SRTM DEM and GDEM have been widely used for terrain slope retrieval in forests. However, the slope estimation accuracy is generally limited due to the DEMs’ low vertical accuracy o...
Roughness is an important input parameter for modeling of natural hazards such as floods, rock falls and avalanches, where it is basically assumed that flow velocities decrease with increasing roughness. Seeing roughness as a multi-scale level concep...
A full understanding of the growth and distribution of tree roots is conducive to guiding precision irrigation, fertilization, and other agricultural work during agricultural production. Detecting tree roots with a ground-penetrating radar is a repea...
Bolts have the advantages of simple installation and easy removal. They are widely applied in aerospace and high-speed railway traffic. However, the loosening of bolts under mixed loads can lead to nonlinear decreases in pre-loading. This affects the...
Compared with the previous full-waveform data, the new generation of ICESat-2/ATLAS (Advanced Terrain Laser Altimeter System) has a larger footprint overlap density and a smaller footprint area. This study used ATLAS data to estimate forest abovegrou...
To address prevalent industrial challenges, including the high cost of fabricating microstructures via photolithography and 3D printing, impurity residues easily generated by conventional physical/chemical pore-forming techniques, and the limited sen...
Silent Brain Infarction (SBI) is increasingly recognized in patients with cardiac conditions, particularly Atrial Fibrillation (AF) in elderly patients and those undergoing Transcatheter Aortic Valve Implantation (TAVI). While these infarcts often go...