Skip to Content

1,669 Results Found

  • Article
  • Open Access
19 Citations
7,403 Views
16 Pages

Development of a Magnetostrictive FeNi Coated Surface Acoustic Wave Current Sensor

  • Jie Tong,
  • Yana Jia,
  • Wen Wang,
  • Yang Wang and ,
  • Shiyue Wang,
  • Xinlu Liu and
  • Yuqing Lei
  • + 2 authors+ 0 author

25 July 2017

A magnetostrictive FeNi-coated surface acoustic wave (SAW)-based current sensor was proposed in this work. The weak remanence and hysteresis effect of the FeNi itself contributes to suppress the asymmetry in sensor response at increasing and decreasi...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
3 Citations
1,487 Views
13 Pages

1 November 2023

To improve the insulation diagnosis of a medium-voltage (MV) switchgear, we have developed a four-terminal surface current sensor and a method to estimate the direction of partial discharge occurrence. In this method, the accuracy of the direction es...

(This article belongs to the Special Issue Advanced Technologies in Partial Discharge Detection and Fault Diagnosis)
  • Article
  • Open Access
7 Citations
4,417 Views
21 Pages

18 December 2024

The design and study of pulsed eddy current sensors for detecting surface defects in small-diameter rods are highly significant. Accurate detection and identification of surface defects in small-diameter rods may be attained by the ongoing optimizati...

(This article belongs to the Special Issue Intelligent Sensor Technologies for Predictive Maintenance and Structural Health Monitoring)
  • Article
  • Open Access
2,242 Views
11 Pages

Design of Self-Integrating Transient Surface Current Density Sensor Integrated Fiber Transmission Link

  • Yifei Liu,
  • Wei Wu,
  • Xin Nie,
  • Mo Zhao and ,
  • Jiaqi Wang,
  • Feng Wei,
  • Wenbing Wang and
  • Jinxi Li
  • + 3 authors+ 0 author

23 August 2023

The transient surface current density reflects the external coupling of the electromagnetic pulse (EMP) to the tested device. In this paper, the generation mechanism and measurement principle of conductor surface current density are introduced, and t...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
20 Citations
9,494 Views
11 Pages

1 July 2017

To efficiently inspect surface defects on steel ball bearings, a new method based on a circumferential eddy current array (CECA) sensor was proposed here. The best probe configuration, in terms of the coil quality factor (Q-factor), magnetic field in...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
17 Citations
6,929 Views
11 Pages

5 December 2017

Steel ball surface-defect inspection was performed by using a new saddle-type eddy current sensor (SECS), which included a saddle coil and a signal conditioning circuit. The saddle coil was directly wound on the steel ball’s outer bracket in a semi-c...

(This article belongs to the Special Issue Magnetic Sensors and Their Applications)
  • Article
  • Open Access
11 Citations
3,559 Views
17 Pages

Analysis of Tilt Effect on Notch Depth Profiling Using Thin-Skin Regime of Driver-Pickup Eddy-Current Sensor

  • Mingyang Lu,
  • Xiaobai Meng,
  • Ruochen Huang,
  • Anthony Peyton and
  • Wuliang Yin

17 August 2021

Electromagnetic eddy current sensors are commonly used to identify and quantify the surface notches of metals. However, the unintentional tilt of eddy current sensors affects results of size profiling, particularly for the depth profiling. In this pa...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
9 Citations
3,804 Views
12 Pages

Enhanced Sensitivity of FeGa Thin-Film Coated SAW Current Sensor

  • Yuan Sun,
  • Yana Jia,
  • Yufeng Zhang,
  • Lina Cheng and ,
  • Yong Liang and
  • Wen Wang
  • + 1 author+ 0 author

10 December 2021

A surface acoustic wave (SAW) device is proposed for sensing current by employing the patterned FeGa thin film as the sensitive interface. The layered media structure of FeGa/SiO2/LiNbO3 was established to reveal the working principle of the sensors,...

(This article belongs to the Special Issue Wireless and Passive Surface Acoustic Wave Sensor)
  • Article
  • Open Access
13 Citations
4,657 Views
14 Pages

1 March 2023

This work presents a new eddy current testing array probe and readout electronics that target the layer-wise quality control in powder bed fusion metal additive manufacturing. The proposed design approach brings important benefits to the sensors&rsqu...

(This article belongs to the Special Issue Sensor and Sensing Technologies for Structural Health Monitoring and Non-Destructive Testing)
  • Article
  • Open Access
1 Citations
2,799 Views
17 Pages

3 November 2023

The well installed status of raft vibration isolation is undoubtedly of great significance in marine engineering, especially for submarines. To achieve this, the accurate measurement of the installation space of the vibration isolation is necessary....

(This article belongs to the Special Issue Ships and Offshore Structures: Design and Mechanical Behavior)
  • Article
  • Open Access
2 Citations
6,460 Views
13 Pages

Measurement Method for Quality Control of Cylinders in Roll-to-Roll Printing Machines

  • Diego Scaccabarozzi,
  • Marianna Magni,
  • Bortolino Saggin,
  • Marco Tarabini and ,
  • Carmine Cioffi and
  • Simone Nasatti
  • + 1 author+ 0 author

This paper describes a measurement method for the quality control of cylinders for printing machines based on roll-to-roll presses. If the surface finishing of the cylinders is not adequate, the printing is unacceptable, and the defective cylinders m...

  • Article
  • Open Access
4 Citations
3,837 Views
19 Pages

Study of the B-Dot Sensor for Aircraft Surface Current Measurement

  • Chen Tong,
  • Zemin Duan,
  • Yeyuan Huang,
  • Shanliang Qiu and ,
  • Xiaoliang Si,
  • Zhibao Li and
  • Zhijie Yuan
  • + 2 authors+ 0 author

3 October 2022

The B-dot sensor is a type of Rogowski coil widely used in the measurement of current. However, the accuracy of the B-dot for measuring aircraft high-frequency lightning current is greatly affected by factors such as numerical integration drift, high...

(This article belongs to the Section Industrial Sensors)
  • Article
  • Open Access
1 Citations
1,094 Views
21 Pages

An Enhanced Absolute Eddy Current Probe for Surface Cracks Detection at High Temperatures

  • Zhiying Liu,
  • Wenze Shi,
  • Chao Lu,
  • Tuan Zhu and ,
  • Hongyu Sun,
  • Zhonghao Luo,
  • Gongpeng Yang and
  • Yiping Liang
  • + 3 authors+ 0 author

26 June 2026

Non-destructive evaluation of surface cracks in Inconel 718 nickel-based alloys operating at high temperatures is crucial for monitoring aero-engine hot-section components. Conventional eddy current testing is often constrained by thermal core degrad...

(This article belongs to the Special Issue Intelligent Sensors and Signal Processing in Industry—2nd Edition)
  • Article
  • Open Access
31 Citations
8,928 Views
9 Pages

A Flexible Arrayed Eddy Current Sensor for Inspection of Hollow Axle Inner Surfaces

  • Zhenguo Sun,
  • Dong Cai,
  • Cheng Zou,
  • Wenzeng Zhang and
  • Qiang Chen

23 June 2016

A reliable and accurate inspection of the hollow axle inner surface is important for the safe operation of high-speed trains. In order to improve the reliability of the inspection, a flexible arrayed eddy current sensor for non-destructive testing of...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
6 Citations
5,069 Views
30 Pages

11 January 2022

This research investigates the applicability of combining spatial filter’s algorithm to extract surface ocean current. Accordingly, the raster filters were tested on 80–13,505 daily images to detect Kuroshio Current (KC) on weekly, season...

(This article belongs to the Section Ocean Remote Sensing)
  • Communication
  • Open Access
35 Citations
7,347 Views
8 Pages

Thin-Film-Based SAW Magnetic Field Sensors

  • Jana Marie Meyer,
  • Viktor Schell,
  • Jingxiang Su,
  • Simon Fichtner and ,
  • Erdem Yarar,
  • Florian Niekiel,
  • Thorsten Giese,
  • Anne Kittmann,
  • Lars Thormählen and
  • Fabian Lofink
  • + 9 authors+ 4 authors

7 December 2021

In this work, the first surface acoustic-wave-based magnetic field sensor using thin-film AlScN as piezoelectric material deposited on a silicon substrate is presented. The fabrication is based on standard semiconductor technology. The acoustically a...

(This article belongs to the Special Issue Magnetoelectric Sensor Systems and Applications)
  • Article
  • Open Access
16 Citations
7,436 Views
13 Pages

Design Optimization of PCB-Based Rotary-Inductive Position Sensors

  • Aldi Hoxha,
  • Mauro Passarotto,
  • Gentjan Qama and
  • Ruben Specogna

21 June 2022

This paper introduces a novel methodology to optimize the design of a ratiometric rotary inductive position sensor (IPS) fabricated in printed circuit board (PCB) technology. The optimization aims at reducing the linearity error of the sensor and amp...

(This article belongs to the Collection Electromagnetic Sensors)
  • Feature Paper
  • Article
  • Open Access
21 Citations
12,867 Views
8 Pages

Fully Depleted, Trench-Pinned Photo Gate for CMOS Image Sensor Applications

  • Francois Roy,
  • Andrej Suler,
  • Thomas Dalleau,
  • Romain Duru and ,
  • Daniel Benoit,
  • Jihane Arnaud,
  • Yvon Cazaux,
  • Catherine Chaton,
  • Laurent Montes and
  • Guo-Neng Lu
  • + 6 authors+ 1 author

28 January 2020

Tackling issues of implantation-caused defects and contamination, this paper presents a new complementary metal–oxide–semiconductor (CMOS) image sensor (CIS) pixel design concept based on a native epitaxial layer for photon detection, cha...

(This article belongs to the Special Issue Special issue on the 2019 International Image Sensor Workshop (IISW2019))
  • Review
  • Open Access
7 Citations
4,711 Views
38 Pages

Reduction in Dark Current in Photodiodes: A Review

  • Alper Ülkü,
  • Ralph Potztal,
  • Tobias Blaettler,
  • Cengiz Tuğsav Küpçü and ,
  • Reto Besserer,
  • Dietmar Bertsch,
  • Tina Strüning and
  • Samuel Huber
  • + 3 authors+ 0 author

8 April 2026

Dark current represents a fundamental limiting factor in photodiode performance, establishing the noise floor and constraining detectivity in low-light applications. This comprehensive literature review examines publications covering the physical mec...

(This article belongs to the Special Issue Optoelectronic Integration Devices and Their Applications)
  • Article
  • Open Access
1,896 Views
16 Pages

5 December 2023

The atmospheric electric current, “air–earth current”, flows between the low ionosphere and Earth’s surface. The source of this current is the potential difference between the global equalizing layer called the ionosphere and...

(This article belongs to the Special Issue Advanced Sensing Technology for Environment Monitoring)
  • Article
  • Open Access
4 Citations
1,681 Views
17 Pages

Investigation of Influencing Factors on the Measurement Signal of a CMOS Image Sensor for Measuring Field Emission Currents

  • Matthias Hausladen,
  • Andreas Schels,
  • Ali Asgharzade,
  • Philipp Buchner and ,
  • Mathias Bartl,
  • Dominik Wohlfartsstätter,
  • Simon Edler,
  • Michael Bachmann and
  • Rupert Schreiner
  • + 4 authors+ 0 author

28 February 2025

We use optical CMOS image sensors for spatially and time-resolved measurement of the emission currents of field emission cathodes. The measured signal depends, on the one hand, on the emission current that flows from the cathode surface through the v...

(This article belongs to the Special Issue Recent Advances of Optoelectronic Devices and Semiconductor Sensors)
  • Article
  • Open Access
11 Citations
8,173 Views
18 Pages

29 April 2015

An unsupervised approach to classify surface defects in wire rod manufacturing is developed in this paper. The defects are extracted from an eddy current signal and classified using a clustering technique that uses the dynamic time warping distance a...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
16 Citations
4,084 Views
11 Pages

Enhancement of Sensitivity and Accuracy of Micro/Nano Water Droplets Detection Using Galvanic-Coupled Arrays

  • Rekha Goswami Shrestha,
  • Tatsuya Ando,
  • Yukihiro Sakamoto and
  • Jin Kawakita

17 October 2019

A moisture sensor has been reported that detects invisibly small water droplets and distinguishes their particle size with high accuracy and high speed. This sensor uses narrow lines of dissimilar metals as electrodes, arranged with gaps of 0.5 to 10...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
5 Citations
8,122 Views
14 Pages

Contact Pressure Level Indication Using Stepped Output Tactile Sensors

  • Eunsuk Choi,
  • Onejae Sul,
  • Juyoung Kim,
  • Kyumin Kim and ,
  • Jong-Seok Kim,
  • Dae-Yong Kwon,
  • Byong-Deok Choi and
  • Seung-Beck Lee
  • + 3 authors+ 0 author

9 April 2016

In this article, we report on a novel diaphragm-type tactile pressure sensor that produces stepwise output currents depending on varying low contact pressures. When contact pressures are applied to the stepped output tactile sensor (SOTS), the sensor...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
15 Citations
4,886 Views
23 Pages

The Employment of the Surface Plasmon Resonance (SPR) Microscopy Sensor for the Detection of Individual Extracellular Vesicles and Non-Biological Nanoparticles

  • Nour Sharar,
  • Konstantin Wüstefeld,
  • Rahat Morad Talukder,
  • Julija Skolnik and ,
  • Katharina Kaufmann,
  • Bernd Giebel,
  • Verena Börger,
  • Friedrich Nolte,
  • Carsten Watzl and
  • Victoria Shpacovitch
  • + 7 authors+ 2 authors

12 April 2023

A wide-field surface plasmon resonance (SPR) microscopy sensor employs the surface plasmon resonance phenomenon to detect individual biological and non-biological nanoparticles. This sensor enables the detection, sizing, and quantification of biologi...

(This article belongs to the Section Biosensor and Bioelectronic Devices)
  • Review
  • Open Access
205 Citations
17,266 Views
21 Pages

Road Surface Monitoring Using Smartphone Sensors: A Review

  • Shahram Sattar,
  • Songnian Li and
  • Michael Chapman

9 November 2018

Road surface monitoring is a key factor to providing smooth and safe road infrastructure to road users. The key to road surface condition monitoring is to detect road surface anomalies, such as potholes, cracks, and bumps, which affect driving comfor...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
17 Citations
5,771 Views
24 Pages

A Synergetic Approach for the Space-Based Sea Surface Currents Retrieval in the Mediterranean Sea

  • Daniele Ciani,
  • Marie-Hélène Rio,
  • Milena Menna and
  • Rosalia Santoleri

30 May 2019

We present a method for the remote retrieval of the sea surface currents in the Mediterranean Sea. Combining the altimeter-derived currents with sea-surface temperature information, we created daily, gap-free high resolution maps of sea surface curre...

(This article belongs to the Special Issue Ten Years of Remote Sensing at Barcelona Expert Center)
  • Communication
  • Open Access
2 Citations
3,735 Views
15 Pages

On Differential Imaging Using Electromagnetic Simulation for Vehicular Antenna Signature Analysis

  • Jose Antonio Solano-Perez,
  • María-Teresa Martínez-Inglés,
  • Jose-Maria Molina-Garcia-Pardo,
  • Jordi Romeu and ,
  • Lluis Jofre-Roca,
  • Christian Ballesteros-Sánchez,
  • José-Víctor Rodríguez,
  • Antonio Mateo-Aroca and
  • Raúl Guzmán-Quirós
  • + 4 authors+ 0 author

30 May 2021

The current trend in vehicles is to integrate a wide number of antennae and sensors operating at a variety of frequencies for sensing and communications. The integration of these antennae and sensors in the vehicle platform is complex because of the...

(This article belongs to the Section Remote Sensors)
  • Article
  • Open Access
18 Citations
6,570 Views
12 Pages

Sensing Responses Based on Transfer Characteristics of InAs Nanowire Field-Effect Transistors

  • Alex C. Tseng,
  • David Lynall,
  • Igor Savelyev,
  • Marina Blumin and ,
  • Shiliang Wang and
  • Harry E. Ruda
  • + 1 author+ 0 author

16 July 2017

Nanowire-based field-effect transistors (FETs) have demonstrated considerable promise for a new generation of chemical and biological sensors. Indium arsenide (InAs), by virtue of its high electron mobility and intrinsic surface accumulation layer of...

(This article belongs to the Special Issue State-of-the-Art Sensors Technology in Canada 2017)
  • Article
  • Open Access
5 Citations
7,974 Views
10 Pages

InN Based Water Condensation Sensors on Glass and Flexible Plastic Substrates

  • Viorel Dumitru,
  • Stefan Costea,
  • Mihai Brezeanu,
  • George E. Stan and ,
  • Cristina Besleaga,
  • Aurelian C. Galca,
  • Gabriela Ionescu and
  • Octavian Ionescu
  • + 3 authors+ 0 author

6 December 2013

In this paper, we report the realization and characterization of a condensation sensor based on indium nitride (InN) layers deposited by magnetron sputtering on glass and flexible plastic substrates, having fast response and using potentially low cos...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
11 Citations
5,068 Views
16 Pages

Non-Contact Current Measurement for Three-Phase Rectangular Busbars Using TMR Sensors

  • Huafeng Su,
  • Haojun Li,
  • Weihao Liang,
  • Chaolan Shen and
  • Zheng Xu

9 January 2024

This paper proposes a non-contact current measurement method for three-phase rectangular busbars based on TMR (tunneling magneto-resistance) sensors, due to their advantages of large dynamic range, wide bandwidth, light weight, and easy installation....

(This article belongs to the Special Issue Feature Papers in Electronic Sensors)
  • Article
  • Open Access
4 Citations
3,731 Views
23 Pages

On the Measurement of Ocean Near-Surface Current from a Moving Buoy

  • Carlos F. Herrera-Vázquez,
  • Nicolas Rascle,
  • Francisco J. Ocampo-Torres,
  • Pedro Osuna and
  • Héctor García-Nava

This paper studies the error that occurs when measuring surface currents with a current meter mounted on a buoy or a mooring line whose horizontal and vertical motions respond to the presence of waves. The error is defined with respect to an Eulerian...

(This article belongs to the Section Physical Oceanography)
  • Article
  • Open Access
43 Citations
5,656 Views
13 Pages

TouchRoller: A Rolling Optical Tactile Sensor for Rapid Assessment of Textures for Large Surface Areas

  • Guanqun Cao,
  • Jiaqi Jiang,
  • Chen Lu,
  • Daniel Fernandes Gomes and
  • Shan Luo

28 February 2023

Tactile sensing is important for robots to perceive the world as it captures the physical surface properties of the object with which it is in contact and is robust to illumination and colour variances. However, due to the limited sensing area and th...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
12 Citations
6,930 Views
19 Pages

Computing Coastal Ocean Surface Currents from MODIS and VIIRS Satellite Imagery

  • Jianfei Liu,
  • William J. Emery,
  • Xiongbin Wu,
  • Miao Li and ,
  • Chuan Li and
  • Lan Zhang
  • + 1 author+ 0 author

24 October 2017

We explore the potential of computing coastal ocean surface currents from Moderate-Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) satellite imagery using the maximum cross-correlation (MCC) method....

(This article belongs to the Special Issue Ocean Surface Currents: Progress in Remote Sensing and Validation)
  • Article
  • Open Access
31 Citations
14,126 Views
16 Pages

Planar Array Sensor for High-speed Component Distribution Imaging in Fluid Flow Applications

  • Marco Jose Da Silva,
  • Tobias Sühnel,
  • Eckhard Schleicher,
  • Roman Vaibar and ,
  • Dirk Lucas and
  • Uwe Hampel
  • + 1 author+ 0 author

19 October 2007

A novel planar array sensor based on electrical conductivity measurements ispresented which may be applied to visualize surface fluid distributions. The sensor ismanufactured using printed-circuit board fabrication technology and comprises of 64 x 64...

(This article belongs to the Special Issue Intelligent Sensors)
  • Article
  • Open Access
13 Citations
4,945 Views
16 Pages

A Millimeter-Resolution Operando Thermal Image of Prismatic Li-Ion Batteries Using a Distributed Optical Fiber Sensor

  • Zhen Guo,
  • Mina Abedi Varnosfaderani,
  • Calum Briggs,
  • Erdogan Guk and
  • James Marco

With the demand for energy gravimetric and volumetric density in electrical vehicles, lithium-ion batteries are undergoing a trend toward larger formats, along with maximized cell-to-pack efficiency. Current battery thermal management systems and bat...

  • Article
  • Open Access
20 Citations
6,466 Views
16 Pages

Three-Axis Inductive Displacement Sensor Using Phase-Sensitive Digital Signal Processing for Industrial Magnetic Bearing Applications

  • Teemu Sillanpää,
  • Alexander Smirnov,
  • Pekko Jaatinen,
  • Jouni Vuojolainen and ,
  • Niko Nevaranta,
  • Rafal Jastrzebski and
  • Olli Pyrhönen
  • + 2 authors+ 0 author

31 May 2021

Non-contact rotor position sensors are an essential part of control systems in magnetically suspended high-speed drives. In typical active magnetic bearing (AMB) levitated high-speed machine applications, the displacement of the rotor in the mechanic...

(This article belongs to the Section High Torque/Power Density Actuators)
  • Article
  • Open Access
41 Citations
6,528 Views
10 Pages

11 April 2017

We developed an accurate and sensitive sensor for electrochemical detection of bisphenol A (BPA) with a high-conductivity graphite nanoparticle (GN) film electrode. The GNs consisted of several stacked graphene sheets and showed a homogenous spherica...

(This article belongs to the Special Issue Sensors for Biomedical, Environmental and Food Monitoring Applications)
  • Article
  • Open Access
1 Citations
1,137 Views
18 Pages

Graphene Flakes and Ethylene–Vinyl Acetate-Based Sensor for Detecting Mechanical Damage in Photovoltaic Panels on Sound-Absorbing Screens: An Engineering Approach for Civil and Military Applications

  • Adam Januszko,
  • Krzysztof Górski,
  • Krzysztof A. Bogdanowicz,
  • Kazimierz Drabczyk and ,
  • Mariusz Zdrojek,
  • Klaudia Żerańska,
  • Witalis Pellowski,
  • Jacek Miedziak and
  • Agnieszka Iwan
  • + 4 authors+ 0 author

3 April 2025

In this work, we present a new graphene-based sensor designed to monitor a set of photovoltaic panels on a sound-absorbing screen in terms of their potential mechanical damage. The innovative design of the photovoltaic module and consequently its sou...

(This article belongs to the Section A2: Solar Energy and Photovoltaic Systems)
  • Article
  • Open Access
14 Citations
8,463 Views
14 Pages

AC and Phase Sensing of Nanowires for Biosensing

  • Marco Crescentini,
  • Michele Rossi,
  • Peter Ashburn,
  • Marta Lombardini and ,
  • Enrico Sangiorgi,
  • Hywel Morgan and
  • Marco Tartagni
  • + 2 authors+ 0 author

19 April 2016

Silicon nanowires are label-free sensors that allow real-time measurements. They are economical and pave the road for point-of-care applications but require complex readout and skilled personnel. We propose a new model and technique for sensing nanow...

(This article belongs to the Special Issue Micro- and Nano-Bio-Interfaces)
  • Article
  • Open Access
4 Citations
4,260 Views
22 Pages

Detection of Surface and Subsurface Flaws with Miniature GMR-Based Gradiometer

  • Huu-Thang Nguyen,
  • Jen-Tzong Jeng,
  • Van-Dong Doan,
  • Chinh-Hieu Dinh and ,
  • Xuan Thang Trinh and
  • Duy-Vinh Dao
  • + 1 author+ 0 author

18 April 2022

The eddy-current (EC) testing method is frequently utilized in the nondestructive inspection of conductive materials. To detect the minor and complex-shaped defects on the surface and in the underlying layers of a metallic sample, a miniature eddy-cu...

(This article belongs to the Special Issue Advanced Sensors for Intelligent Control Systems)
  • Article
  • Open Access
5 Citations
1,944 Views
13 Pages

5 December 2023

Refractive-index optical sensors have been extensively studied. Originally, they were surface plasmon resonance sensors using only a flat gold film. Currently, to develop practically useful label-free optical sensors, numerous proposals for refractiv...

(This article belongs to the Special Issue Functional Nanomaterials for Sensing and Detection (2nd Edition))
  • Proceeding Paper
  • Open Access
2 Citations
1,839 Views
6 Pages

Binary and Ternary Oxide Nanostructured Multisystems for Gas Sensors

  • Svetlana Nalimova,
  • Zamir Shomakhov and
  • Vyacheslav Moshnikov

18 September 2023

Currently, semiconductor gas sensors are among the most common types of sensing devices for detecting dangerous and toxic gases in the atmosphere. However, their characteristics should be improved in order to use them in practical applications. In th...

(This article belongs to the Proceedings of The 2nd International Electronic Conference on Chemical Sensors and Analytical Chemistry)
  • Article
  • Open Access
24 Citations
5,254 Views
10 Pages

Study on the Sensing Signal Profiles for Determination of Process Window of Flexible Sensors Based on Surface Treated PDMS/CNT Composite Patches

  • Joonwon Bae,
  • Yunjung Hwang,
  • Seon Joo Park,
  • Ji-Hwan Ha and ,
  • Hye Jun Kim,
  • Ayeon Jang,
  • Jaieun An,
  • Chang-Soo Lee and
  • Sung-Hoon Park
  • + 4 authors+ 0 author

27 August 2018

In this study, analysis of sensing signal profiles was conducted focusing on the close relationship between electrical conductivity and signal intensity in surface treated poly(dimethylsiloxane)/carbon nanotube (PDMS/CNT) composite patches for the pu...

(This article belongs to the Special Issue Polymer Based Bio-Sensors)
  • Article
  • Open Access
9 Citations
4,693 Views
27 Pages

This paper proposes a phase current reconstruction strategy based on a dc bus using a single current sensor for a surface permanent magnet synchronous motor (SPMSM). The method of a single current sensor reduces the number of mechanical hall sensors...

(This article belongs to the Section Industrial Electronics)
  • Article
  • Open Access
109 Citations
7,912 Views
22 Pages

Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140

  • Mustafa Kuntoğlu,
  • Abdullah Aslan,
  • Hacı Sağlam,
  • Danil Yurievich Pimenov and ,
  • Khaled Giasin and
  • Tadeusz Mikolajczyk
  • + 1 author+ 0 author

5 August 2020

Optimization of tool life is required to tune the machining parameters and achieve the desired surface roughness of the machined components in a wide range of engineering applications. There are many machining input variables which can influence surf...

(This article belongs to the Collection Multi-Sensor Information Fusion)
  • Communication
  • Open Access
7 Citations
3,753 Views
9 Pages

23 January 2022

A surface plasmon resonance (SPR) sensor chip fabricated with a comb-shaped microelectrode array to supply alternating current (AC) voltage is reported. The chip induces circulating flow near the surface (i.e., AC electroosmosis). The circulating flo...

(This article belongs to the Special Issue Micro/Nano-Devices for Biosensing: From Single Molecule Sensing to Device Applications)
  • Article
  • Open Access
7 Citations
7,580 Views
13 Pages

Aptamer-Based Carboxyl-Terminated Nanocrystalline Diamond Sensing Arrays for Adenosine Triphosphate Detection

  • Evi Suaebah,
  • Takuro Naramura,
  • Miho Myodo,
  • Masataka Hasegawa and ,
  • Shuichi Shoji,
  • Jorge J. Buendia and
  • Hiroshi Kawarada
  • + 2 authors+ 0 author

21 July 2017

Here, we propose simple diamond functionalization by carboxyl termination for adenosine triphosphate (ATP) detection by an aptamer. The high-sensitivity label-free aptamer sensor for ATP detection was fabricated on nanocrystalline diamond (NCD). Carb...

(This article belongs to the Section Biosensors)
  • Communication
  • Open Access
5 Citations
2,367 Views
8 Pages

Sensor surfaces with micron- and nano-gap scales possess high surface-to-volume ratio which greatly affects their contribution towards water adsorption and condensation. However, the quantitative relationship between adsorbed water molecules and cond...

(This article belongs to the Section Applied Chemical Sensors)
  • Editorial
  • Open Access
1 Citations
6,170 Views
3 Pages

31 March 2014

The field of optomechatronics combines the synergistic effects of optics, mechanics and electronics for efficient sensor development. Optical sensors for the measurement of mechanical quantities, equipped with appropriate electronic signal (pre)proce...

(This article belongs to the Special Issue Optomechatronics)

of 34