Skip to Content

49 Results Found

  • Article
  • Open Access
9 Citations
3,218 Views
17 Pages

This study investigates the impact of small dimples on the tribological properties of CoCrMo (CCM) surfaces. Laser-ablated textures with 5 µm diameter dimples were fabricated at varying aspect ratios (0.1, 0.2, 0.3) and surface densities (5%, 1...

(This article belongs to the Special Issue Tribology of Textured Surfaces)
  • Article
  • Open Access
7 Citations
3,339 Views
9 Pages

11 September 2022

Dimpled particles are synthesized through the seeded polymerization of fluoroacrylate and styrene on swelled polystyrene spheres. The morphologies of the particles can be controlled by the polymerization temperature, the amount of solvent swelling th...

  • Article
  • Open Access
28 Citations
8,882 Views
21 Pages

Dimples for Skin-Friction Drag Reduction: Status and Perspectives

  • Federica Gattere,
  • Alessandro Chiarini and
  • Maurizio Quadrio

13 July 2022

Dimples are small concavities imprinted on a flat surface, known to affect heat transfer and also flow separation and aerodynamic drag on bluff bodies when acting as a standard roughness. Recently, dimples have been proposed as a roughness pattern th...

(This article belongs to the Special Issue Drag Reduction in Turbulent Flows)
  • Article
  • Open Access
1,773 Views
12 Pages

On Variable Scale Evolution of Stress and Strain of TA2 Titanium Plate in Combined Hammering

  • Xudong Xiao,
  • Bolun Zhang,
  • Dan Qiao,
  • Yong Li and ,
  • Renfeng Zhao and
  • Pengkang Zhao
  • + 1 author+ 0 author

16 December 2022

Combined peening composed of multiple peening processes or peening media is a surface treatment method for comprehensive control of the macro shape and performance of the part. Compared to combined peening, the impact kinetic energy of the combined h...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
5 Citations
1,713 Views
18 Pages

Relationship Between Fracture Fractal and Mechanical Properties of 5083 Aluminum Alloy Sheet Prepared by Alternate Ring-Groove Pressing and Torsion

  • Chunhui Zhang,
  • Yu Wang,
  • Mingxin Wang,
  • Wenhao Li and ,
  • Chunxiang Zhang and
  • Junting Luo
  • + 1 author+ 0 author

2 December 2024

In this study, the tensile fracture morphology of a 5083 aluminum alloy sheet prepared by alternate ring-groove pressing torsion and torsional flattening at room temperature (ARPT-TF-R) under different numbers of torsional flattening passes was analy...

(This article belongs to the Special Issue Metal Plastic Deformation and Forming)
  • Article
  • Open Access
4 Citations
3,813 Views
15 Pages

Apple-like Shape of Freezing Paraffin Wax Droplets and Its Origin

  • Pritam Kumar Roy,
  • Shraga Shoval,
  • Nir Shvalb,
  • Leonid A. Dombrovsky and ,
  • Oleg Gendelman and
  • Edward Bormashenko
  • + 1 author+ 0 author

8 August 2023

Paraffin wax stores energy in the form of latent heat at a nearly constant temperature during melting and releases this energy during solidification. This effect is used in industrial energy storage. At the same time, the possible deformation of even...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
8 Citations
3,222 Views
19 Pages

The Effects of Shot Distance and Impact Sequence on the Residual Stress Field in Shot Peening Finite Element Model

  • Zhou Wang,
  • Ming Shi,
  • Jin Gan,
  • Xiaoli Wang and ,
  • Ying Yang and
  • Xudong Ren
  • + 1 author+ 0 author

11 March 2021

In order to investigate the effect of shot distance and impact sequence on the residual stress distribution of 42CrMo steel in shot peening (SP) finite element (FE) simulation, 3D dynamic models with order dimple pattern and stochastic dimple pattern...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
8 Citations
3,662 Views
15 Pages

Effect of Heat Input on Microstructure and Mechanical Properties of Deposited Metal of E120C-K4 High Strength Steel Flux-Cored Wire

  • Wen Wu,
  • Tianli Zhang,
  • Haoxin Chen,
  • Jingjing Peng and ,
  • Kaiqin Yang,
  • Sanbao Lin,
  • Peiyin Wen,
  • Zhuoxin Li,
  • Shanglei Yang and
  • Sindo Kou
  • + 5 authors+ 0 author

20 April 2023

The effect of different heat inputs of 1.45 kJ/mm, 1.78 kJ/mm and 2.31 kJ/mm on the microstructure and mechanical properties of deposited metals of the self-developed AWS A5.28 E120C-K4 high strength steel flux-cored wire was studied by optical micro...

(This article belongs to the Special Issue Advances in Materials Processing (Second Volume))
  • Article
  • Open Access
11 Citations
6,388 Views
12 Pages

24 May 2017

Eighty percent heavy cold thickness reduction and reversion transformation in the temperature range 700–950 °C for 60 s were performed to obtain the reverted ultrafine-grained (UFG) structure in 304 austenitic stainless steel. Through mechanical prop...

(This article belongs to the Special Issue Alloy Steels)
  • Article
  • Open Access
526 Views
22 Pages

Chemical Composition, Microstructure, and Mechanical Properties of Steel Rails Produced by China Hanyang Iron Works

  • Tengshi Liu,
  • Gangsheng Xie,
  • Han Yi,
  • Di Zhang and ,
  • Zhouyan Cai,
  • Yulin Xia and
  • Han Dong
  • + 2 authors+ 0 author

5 August 2026

The history of steel rail manufacturing at the Hanyang Iron Works in China is briefly summarized first in this paper. The chemical composition, microstructure, inclusions, and mechanical properties of the manufactured rails were then systematically a...

(This article belongs to the Topic Advances in Manufacturing and Mechanics of Materials)
  • Article
  • Open Access
1 Citations
2,086 Views
25 Pages

Stability Analysis of the Secondary Motion of a Textured Piston

  • Igal Cohen,
  • Shachar Tresser and
  • Roman Goltsberg

Piston–cylinder pairs are very common in industrial mechanisms. While a piston is primarily designed for axial reciprocating motion, the occurrence of secondary motions—lateral and rotational—due to the small clearance between the p...

(This article belongs to the Special Issue Tribology of Textured Surfaces)
  • Article
  • Open Access
17 Citations
5,476 Views
10 Pages

Influence of Laser Pulse Number on the Ablation of Cemented Tungsten Carbides (WC-CoNi) with Different Grain Size

  • Shiqi Fang,
  • Chia-Jui Hsu,
  • Sven Klein,
  • Luis Llanes and ,
  • Dirk Bähre and
  • Frank Mücklich
  • + 1 author+ 0 author

The ultra-short pulse laser has attracted attention as an advanced tool for functionalizing surface topography, since it has high accuracy and results in little damage. In a previous study, some innovative patterns were introduced on cemented carbide...

(This article belongs to the Special Issue Selected Papers in the Sixth World Tribology Congress (WTC 2017))
  • Article
  • Open Access
782 Views
14 Pages

CFD-Based Performance Analysis of Modified Archimedes Wind Turbine Blades

  • Omar Chalak,
  • Joy Najem,
  • Mickael Mattar,
  • Chawki Lahoud and ,
  • Macole Sabat and
  • Michel Daaboul
  • + 1 author+ 0 author

12 June 2026

This study evaluates the aerodynamic performance of a modified Archimedes Spiral Wind Turbine (ASWT) using Computational Fluid Dynamics (CFD). A baseline model was compared with different designs, including surface dimples and a trailing-edge flap. S...

(This article belongs to the Section A3: Wind, Wave and Tidal Energy)
  • Article
  • Open Access
360 Views
19 Pages

Experimental Study on the Low-Temperature Charpy Impact Property of Typical Rudder Materials

  • Li Yu,
  • Wenyong Guo,
  • Xinglong Pan,
  • Yan Zeng and ,
  • Zhe Wu and
  • Jianggui Han
  • + 1 author+ 0 author

1 October 2026

A series of temperature impact tests were conducted on submersible rudder materials in a polar low-temperature environment. By using an impact testing machine and a scanning electron microscope, the impact performance of samples at different temperat...

(This article belongs to the Special Issue Microstructure and Mechanical Behavior of High-Strength Steel)
  • Article
  • Open Access
27 Citations
4,988 Views
16 Pages

28 August 2022

A combination of fractographic and metallographic analysis during tensile tests over the temperature ranging from 20 °C to 750 °C were carried out to investigate the fracture behaviors and deformation modes so as to clarify the temperature de...

  • Article
  • Open Access
13 Citations
3,483 Views
16 Pages

25 January 2025

This study examines the microstructure and mechanical properties of 5356 aluminum alloy under low heat input conditions during arc additive manufacturing, focusing on the challenges posed by excessive heat input, which hinders specimen formation and...

  • Article
  • Open Access
27 Citations
3,109 Views
18 Pages

Parametric Characterization of Machined Textured Surfaces

  • Pawel Pawlus,
  • Rafal Reizer and
  • Michal Wieczorowski

24 December 2022

Surface topography in general is not easy to characterize due to a great number of different features that appear on it. It is still more challenging for machined textured surfaces that are of high functional significance for tribological purposes. F...

(This article belongs to the Special Issue Surface Inspection and Description in Metrology and Tribology (Second Volume))
  • Article
  • Open Access
13 Citations
3,498 Views
15 Pages

22 October 2021

In this study, using synchrotron radiation X-ray imaging, the microstructure, tensile properties, and fatigue properties of FGH96 nickel-based superalloy were tested, and the fatigue damage mechanism was analyzed. An analysis of the experimental resu...

(This article belongs to the Special Issue Recent Advances in Mechanisms of Fracture and Fatigue)
  • Article
  • Open Access
29 Citations
5,860 Views
10 Pages

Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ

  • Hao-Nan Lou,
  • Chao Wang,
  • Bing-Xing Wang,
  • Zhao-Dong Wang and ,
  • Yu-Qian Li and
  • Zi-Gang Chen
  • + 1 author+ 0 author

11 July 2018

We have studied here the evolution of inclusions in ladle furnace (LF), Ruhrstahl & Heraeus furnace (RH), and simulated welded samples during Ti-Mg oxide metallurgy treatment and the mechanical properties of the heat-affected zone (HAZ) after hig...

(This article belongs to the Special Issue 5th UK-China Steel Research Forum)
  • Interesting Images
  • Open Access
1 Citations
1,161 Views
3 Pages

12 November 2025

A 60-year-old woman with hypertension and hyperlipidemia was referred for an incidentally detected gastric subepithelial mass during screening endoscopy. Esophagogastroduodenoscopy revealed a 10 mm dimple in the antrum, and contrast-enhanced CT showe...

(This article belongs to the Section Pathology and Molecular Diagnostics)
  • Article
  • Open Access
23 Citations
3,953 Views
12 Pages

13 September 2020

In the present study, the effects of rare earth metal (REM) Ce on the number, size distribution and type of inclusions, as well as the grain size, tensile and impact properties of LDX2101 duplex stainless steel, were investigated using thermodynamic...

  • Article
  • Open Access
9 Citations
4,558 Views
14 Pages

27 May 2019

The dissimilar joining of T2 copper to 45 steel was performed by electron beam welding (EBW). Full-strength joints were obtained, and the highest tensile strength was found to be 270 MPa, which is almost equal to the strength of copper. Moreover, the...

  • Article
  • Open Access
26 Citations
8,191 Views
11 Pages

8 June 2023

Titanium alloy has the advantages of low thermal conductivity, a small expansion coefficient and being non-magnetic, making it an ideal low-temperature structural material. In this paper, the typical TC4 titanium alloy in industrial titanium alloy is...

  • Article
  • Open Access
29 Citations
4,680 Views
18 Pages

Fatigue Crack Growth Behavior and Fracture Toughness of EH36 TMCP Steel

  • Qingyan Zhu,
  • Peng Zhang,
  • Xingdong Peng,
  • Ling Yan and
  • Guanglong Li

3 November 2021

The fatigue crack growth behavior and fracture toughness of EH36 thermo-mechanical control process (TMCP) steel were investigated by fatigue crack growth rate testing and fracture toughness testing at room temperature. Scanning electron microscopy wa...

  • Article
  • Open Access
53 Citations
8,644 Views
14 Pages

Microstructure and Tensile Properties of AlSi10Mg Alloy Manufactured by Multi-Laser Beam Selective Laser Melting (SLM)

  • Zhonghua Li,
  • Zezhou Kuai,
  • Peikang Bai,
  • Yunfei Nie and ,
  • Guang Fu,
  • Wenpeng Liu and
  • Shuai Yang
  • + 2 authors+ 0 author

11 December 2019

The multi-beam selective laser forming system is a new type of powder bed laser forming equipment that is different from single-laser selective laser melting (SLM) printers. It is a new generation for a metal powder material moulding process that has...

  • Article
  • Open Access
3 Citations
2,726 Views
11 Pages

Effect of Secondary α Phase on Stress Corrosion Cracking of a Novel Metastable β Titanium Alloy in 3.5% NaCl Solution

  • Haoyu Zhang,
  • Chuan Wang,
  • Shuai Zhang,
  • Xiaoling Yu and ,
  • Ge Zhou,
  • Zhiqiang Zhang and
  • Lijia Chen
  • + 2 authors+ 0 author

19 December 2022

The effect of the secondary α phase on stress corrosion cracking of a novel metastable β titanium alloy, Ti-6Mo-5V-3Al-2Fe, in 3.5% NaCl solution was investigated by slow strain rate testing. Fine acicular secondary α phase was obtai...

(This article belongs to the Special Issue Advances in High Strength Steels)
  • Review
  • Open Access
29 Citations
5,842 Views
30 Pages

Surface Texturing of Cylinder Liners: A Review

  • Pawel Pawlus,
  • Waldemar Koszela and
  • Rafal Reizer

3 December 2022

The effect of cylinder liners on engine performance is substantial. Typically, the cylinder surfaces were plateau honed. However, recently additional dimples or grooves were created on them. This work discusses the tribological impacts of textured cy...

(This article belongs to the Special Issue Tribology: Friction and Wear of Engineering Materials (Second Volume))
  • Article
  • Open Access
2 Citations
2,016 Views
11 Pages

25 August 2024

The mechanical properties of local materials subjected to various stress triaxialities were investigated via self-designed small punch tests and corresponding simulations, which were tailored to the geometry and notch forms of the samples. The finite...

  • Article
  • Open Access
55 Citations
4,665 Views
15 Pages

Effect of SiC Reinforcement and Its Variation on the Mechanical Characteristics of AZ91 Composites

  • Anil Kumar,
  • Santosh Kumar,
  • Nilay Krishna Mukhopadhyay,
  • Anshul Yadav and
  • Jerzy Winczek

31 October 2020

In this study, the processing of SiC particulate-strengthened magnesium alloy metal matrix composites via vacuum supported inert atmosphere stir casting process is presented. The effects of small variations in the SiC particulate (average size 20 &mi...

(This article belongs to the Special Issue Advanced Composites: From Materials Characterization to Structural Application)
  • Article
  • Open Access
6 Citations
2,886 Views
21 Pages

7 November 2022

Cavitation is a destructive hydraulic phenomenon; it causes damage to small hydraulic machinery and large water-conservancy projects, and cavitation and cavitation corrosion problems are long-standing problems for hydraulic machinery experts. Micro-t...

(This article belongs to the Section Friction and Tribology)
  • Article
  • Open Access
1 Citations
2,358 Views
13 Pages

29 March 2021

In this article, the microstructure and mechanical behavior of the Ti49.1Ni50.9 alloy with a high content of nickel in a coarse-grained state, obtained by quenching, ultrafine-grained (obtained through the equal-channel angular pressing (ECAP) method...

(This article belongs to the Special Issue Thermomechanical Properties of Steel)
  • Article
  • Open Access
7 Citations
3,204 Views
21 Pages

Investigation on the Frictional Performance of Surface Textured Ring-Deformed Liner Conjunction in Internal Combustion Engines

  • Cheng Liu,
  • Yanjun Lu,
  • Yongfang Zhang,
  • Lujia Tang and ,
  • Cheng Guo and
  • Norbert Müller
  • + 1 author+ 0 author

18 July 2019

In internal combustion engines (ICEs), the frictional performance of ring-liner conjunction (RLC) has drawn special attention because it greatly affects the fuel efficiency of the engines. In recent years, surface texture (i.e., micro dimples or groo...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
26 Citations
5,674 Views
12 Pages

2 April 2022

Due to the advantages of relatively low cost, increased energy efficiency, increased deposition rate, and the capacity to create medium to large scale components, wire + arc additive manufacturing (WAAM) has gained growing interest. Super martensitic...

(This article belongs to the Special Issue Welding and Processing in Alloy Manufacturing)
  • Article
  • Open Access
13 Citations
3,437 Views
13 Pages

Abrasive Wear Resistance of Plasma-Nitrided Ti Enhanced by Ultrasonic Surface Rolling Processing Pre-Treatment

  • Dingshun She,
  • Shihao Liu,
  • Jiajie Kang,
  • Wen Yue and ,
  • Lina Zhu,
  • Chengbiao Wang,
  • Haidou Wang,
  • Guozheng Ma and
  • Li Zhong
  • + 4 authors+ 0 author

6 October 2019

The objective of the given work was to investigate abrasive wear behaviours of titanium (Ti) treated by ultrasonic surface rolling processing (USRP) pre-treatment and plasma nitriding (PN). Simulated lunar regolith particles (SLRPs) were employed as...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
3 Citations
1,610 Views
18 Pages

Tensile and Fracture Properties Evaluation of Additively Manufactured Different Stainless Steels via Small Punch Testing

  • Ran Li,
  • Wenshu Wei,
  • Mengyu Wu,
  • Fengcai Liu and ,
  • Wenbo Li,
  • Yuehua Lai,
  • Rongming Chen,
  • Hao Liu,
  • Jian Ye and
  • Tianze Cao
  • + 6 authors+ 1 author

15 August 2025

Laser powder bed fusion (LPBF) can fabricate hydraulic components with significant weight reduction, and in this study, small punch tests (SPTs) evaluated the tensile and fracture properties of four stainless steels (30Cr13, 316L, 15-5PH, 17-4PH), al...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
2 Citations
1,142 Views
25 Pages

Application of an Improved Dual-Branch Model Based on Multi-Scale Feature Fusion in Fracture Surface Image Recognition

  • Fei Gao,
  • Denghui Wang,
  • Fulai Yang,
  • Mingping Zhou and ,
  • Yuan Li,
  • Zhen Zheng,
  • Jianpeng Shi and
  • Zheng Zhang
  • + 3 authors+ 0 author

19 November 2025

In order to improve the recognition accuracy and model interpretability of metal fracture scanning electron microscope (SEM) images, this research presents an improved dual-branch model (IDBM) based on multi-scale feature fusion. This model employs V...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
22 Citations
4,848 Views
19 Pages

7 July 2023

In this paper, metal inert gas (MIG) welding of 6082-T6 aluminum alloy with a thickness of 4 mm was simulated using a double ellipsoidal heat source. Based on the simulation results, the evolution of the microstructure, the strengthening mechanism of...

  • Article
  • Open Access
23 Citations
2,547 Views
17 Pages

Effects of Partial-Contact Tool Tilt Angle on Friction Stir Welded AA1050 Aluminum Joint Properties

  • Mahmoud E. Abdullah,
  • M. Nafea M. Rohim,
  • M. M. Mohammed and
  • Hamed Aghajani Derazkola

31 May 2023

This study aims to investigate the impact of partial-contact tool tilt angle (TTA) on the mechanical and microstructure properties of the AA1050 alloy friction stir weld (FSW). Three levels of partial-contact TTA were tested, 0°, 1.5°, and 3&...

(This article belongs to the Special Issue Advances in the Experimentation and Numerical Modeling of Material Joining Processes)
  • Article
  • Open Access
11 Citations
3,221 Views
11 Pages

Chronic Effects of Asymmetric and Symmetric Sport Load in Varsity Athletes across a Six Month Sport Season

  • Valerio Bonavolontà,
  • Maria Chiara Gallotta,
  • Giovanna Zimatore,
  • Davide Curzi and ,
  • Dafne Ferrari,
  • Maria Giulia Vinciguerra,
  • Laura Guidetti and
  • Carlo Baldari
  • + 3 authors+ 0 author

The relation between specific sport practice and possible spine modifications is unclear. The aim of this study was to investigate the effects of different sports on the spine in adult varsity athletes across a six month sports season. Forty-four ath...

  • Article
  • Open Access
3 Citations
2,641 Views
19 Pages

In Situ Observation of Tensile Deformation of Ti-22Al-25Nb Alloy and Characterization of Deformation in α2 Phase

  • Dong Li,
  • Weidong Zeng,
  • Penghui Zhang,
  • Haoyuan Ma and ,
  • Jianwei Xu and
  • Xiong Ma
  • + 1 author+ 0 author

13 July 2022

The room temperature tensile deformation of Ti-22Al-25Nb alloy with an equiaxed α2 phase microstructure and the activated slip system of α2 particles were investigated by a combination of in situ tensile tests and electron backscatter dif...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
4,081 Views
14 Pages

Stress-Controlled Creep–Fatigue of an Advanced Austenitic Stainless Steel at Elevated Temperatures

  • Zeinab Y. Alsmadi,
  • Hamdy Abouelella,
  • Abdullah S. Alomari and
  • K. L. Murty

3 June 2022

Creep–fatigue interaction occurs in many structural components of high-temperature systems operating under cyclic and steady-state service conditions, such as in nuclear power plants, aerospace, naval, and other industrial applications. Thus, u...

  • Article
  • Open Access
11 Citations
3,588 Views
18 Pages

17 December 2019

The primary task of automotive industry materials is to guarantee passengers’ safety during a car crash. To simulate a car crash, the influence of strain rates on mechanical properties and fracture behavior of medium Mn steels with different Si...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Steels)
  • Article
  • Open Access
15 Citations
5,827 Views
15 Pages

27 September 2018

In this experiment, the T-joint of a 6082 aluminum alloy was welded by metal inert gas (MIG) welding and a fatigue test was carried out at room temperature. The mechanisms of generating pores and of fatigue fracture in welded joints are revealed in t...

(This article belongs to the Special Issue Selected Papers from the NMJ2018)
  • Article
  • Open Access
14 Citations
3,748 Views
17 Pages

Mechanical Properties and Microstructure of TIG and ATIG Welded 316L Austenitic Stainless Steel with Multi-Components Flux Optimization Using Mixing Design Method and Particle Swarm Optimization (PSO)

  • Abdeljlil Chihaoui Hedhibi,
  • Kamel Touileb,
  • Rachid Djoudjou,
  • Abousoufiane Ouis and ,
  • Hussein Alrobei and
  • Mohamed M. Z. Ahmed
  • + 1 author+ 0 author

24 November 2021

In this study, the effects of pseudo-ternary oxides on mechanical properties and microstructure of 316L stainless steel tungsten inert gas (TIG) and activating tungsten inert gas (ATIG) welded joints were investigated. The novelty in this work is int...

(This article belongs to the Special Issue Characterisation and Modelling of Manufacturing–Microstructure–Property–Mechanism Relationship for Advanced and Emerging Materials)
  • Article
  • Open Access
1 Citations
2,487 Views
12 Pages

25 April 2024

For the application of forged medium-Mn steels on flywheel rotors, the effect of annealing temperatures from 300 °C to 650 °C on the impact toughness of 0.16C-6.5Mn forged steel was investigated to demonstrate the microstructural characterist...

(This article belongs to the Special Issue Microstructure—Mechanical Property Relationships in High-Strength Steels)
  • Article
  • Open Access
9 Citations
2,569 Views
16 Pages

11 June 2024

With the development of lightweight aerospace structures, the use of the high-quality and efficient laser welding of near-α titanium alloys has received widespread attention and favor thanks to its superior comprehensive performance. The weldin...

(This article belongs to the Special Issue Advanced Welding Technology in Metals III)
  • Article
  • Open Access
5 Citations
2,409 Views
15 Pages

25 June 2023

Mg-3Sn-1Mn-xLa alloy bars were prepared using backward extrusion, and the effects of the La content on the microstructures and mechanical properties of the alloy were systematically studied using an optical microscope (OM), X-ray diffraction (XRD), s...

(This article belongs to the Special Issue Research Progress in High-Performance Magnesium Alloy and Its Applications)
  • Article
  • Open Access
8 Citations
2,503 Views
15 Pages

15 July 2023

The 2195 Al–Li alloy, as one of the representative third-generation Al–Li alloys, has extensive applications in lightweight aerospace structures. In this paper, the anisotropy in mechanical properties and microstructure evolution of 2195...

(This article belongs to the Special Issue Advanced Light Metal and Alloys: Preparation, Characterization, and Applications)
  • Article
  • Open Access
3 Citations
1,256 Views
15 Pages

Research on Aerodynamic Performance of Bionic Fan Blades with Microstructured Surface

  • Meihong Gao,
  • Xiaomin Liu,
  • Meihui Zhu,
  • Chun Shen and ,
  • Zhenjiang Wei,
  • Zhengyang Wu and
  • Chengchun Zhang
  • + 2 authors+ 0 author

The frictional resistance of impeller machinery blades such as aircraft engines, gas turbines, and wind turbines has a decisive impact on their efficiency and energy consumption. Inspired by the micro-tooth structure on the surface of shark skin, mic...

(This article belongs to the Section Biomimetic Surfaces and Interfaces)